| perf-list(1) |
| ============ |
| |
| NAME |
| ---- |
| perf-list - List all symbolic event types |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'perf list' [--no-desc] [--long-desc] |
| [hw|sw|cache|tracepoint|pmu|sdt|metric|metricgroup|event_glob] |
| |
| DESCRIPTION |
| ----------- |
| This command displays the symbolic event types which can be selected in the |
| various perf commands with the -e option. |
| |
| OPTIONS |
| ------- |
| -d:: |
| --desc:: |
| Print extra event descriptions. (default) |
| |
| --no-desc:: |
| Don't print descriptions. |
| |
| -v:: |
| --long-desc:: |
| Print longer event descriptions. |
| |
| --debug:: |
| Enable debugging output. |
| |
| --details:: |
| Print how named events are resolved internally into perf events, and also |
| any extra expressions computed by perf stat. |
| |
| --deprecated:: |
| Print deprecated events. By default the deprecated events are hidden. |
| |
| --unit:: |
| Print PMU events and metrics limited to the specific PMU name. |
| (e.g. --unit cpu, --unit msr, --unit cpu_core, --unit cpu_atom) |
| |
| -j:: |
| --json:: |
| Output in JSON format. |
| |
| [[EVENT_MODIFIERS]] |
| EVENT MODIFIERS |
| --------------- |
| |
| Events can optionally have a modifier by appending a colon and one or |
| more modifiers. Modifiers allow the user to restrict the events to be |
| counted. The following modifiers exist: |
| |
| u - user-space counting |
| k - kernel counting |
| h - hypervisor counting |
| I - non idle counting |
| G - guest counting (in KVM guests) |
| H - host counting (not in KVM guests) |
| p - precise level |
| P - use maximum detected precise level |
| S - read sample value (PERF_SAMPLE_READ) |
| D - pin the event to the PMU |
| W - group is weak and will fallback to non-group if not schedulable, |
| e - group or event are exclusive and do not share the PMU |
| |
| The 'p' modifier can be used for specifying how precise the instruction |
| address should be. The 'p' modifier can be specified multiple times: |
| |
| 0 - SAMPLE_IP can have arbitrary skid |
| 1 - SAMPLE_IP must have constant skid |
| 2 - SAMPLE_IP requested to have 0 skid |
| 3 - SAMPLE_IP must have 0 skid, or uses randomization to avoid |
| sample shadowing effects. |
| |
| For Intel systems precise event sampling is implemented with PEBS |
| which supports up to precise-level 2, and precise level 3 for |
| some special cases |
| |
| On AMD systems it is implemented using IBS (up to precise-level 2). |
| The precise modifier works with event types 0x76 (cpu-cycles, CPU |
| clocks not halted) and 0xC1 (micro-ops retired). Both events map to |
| IBS execution sampling (IBS op) with the IBS Op Counter Control bit |
| (IbsOpCntCtl) set respectively (see the |
| Core Complex (CCX) -> Processor x86 Core -> Instruction Based Sampling (IBS) |
| section of the [AMD Processor Programming Reference (PPR)] relevant to the |
| family, model and stepping of the processor being used). |
| |
| Manual Volume 2: System Programming, 13.3 Instruction-Based |
| Sampling). Examples to use IBS: |
| |
| perf record -a -e cpu-cycles:p ... # use ibs op counting cycles |
| perf record -a -e r076:p ... # same as -e cpu-cycles:p |
| perf record -a -e r0C1:p ... # use ibs op counting micro-ops |
| |
| RAW HARDWARE EVENT DESCRIPTOR |
| ----------------------------- |
| Even when an event is not available in a symbolic form within perf right now, |
| it can be encoded in a per processor specific way. |
| |
| For instance on x86 CPUs, N is a hexadecimal value that represents the raw register encoding with the |
| layout of IA32_PERFEVTSELx MSRs (see [Intel® 64 and IA-32 Architectures Software Developer's Manual Volume 3B: System Programming Guide] Figure 30-1 Layout |
| of IA32_PERFEVTSELx MSRs) or AMD's PERF_CTL MSRs (see the |
| Core Complex (CCX) -> Processor x86 Core -> MSR Registers section of the |
| [AMD Processor Programming Reference (PPR)] relevant to the family, model |
| and stepping of the processor being used). |
| |
| Note: Only the following bit fields can be set in x86 counter |
| registers: event, umask, edge, inv, cmask. Esp. guest/host only and |
| OS/user mode flags must be setup using <<EVENT_MODIFIERS, EVENT |
| MODIFIERS>>. |
| |
| Example: |
| |
| If the Intel docs for a QM720 Core i7 describe an event as: |
| |
| Event Umask Event Mask |
| Num. Value Mnemonic Description Comment |
| |
| A8H 01H LSD.UOPS Counts the number of micro-ops Use cmask=1 and |
| delivered by loop stream detector invert to count |
| cycles |
| |
| raw encoding of 0x1A8 can be used: |
| |
| perf stat -e r1a8 -a sleep 1 |
| perf record -e r1a8 ... |
| |
| It's also possible to use pmu syntax: |
| |
| perf record -e r1a8 -a sleep 1 |
| perf record -e cpu/r1a8/ ... |
| perf record -e cpu/r0x1a8/ ... |
| |
| Some processors, like those from AMD, support event codes and unit masks |
| larger than a byte. In such cases, the bits corresponding to the event |
| configuration parameters can be seen with: |
| |
| cat /sys/bus/event_source/devices/<pmu>/format/<config> |
| |
| Example: |
| |
| If the AMD docs for an EPYC 7713 processor describe an event as: |
| |
| Event Umask Event Mask |
| Num. Value Mnemonic Description |
| |
| 28FH 03H op_cache_hit_miss.op_cache_hit Counts Op Cache micro-tag |
| hit events. |
| |
| raw encoding of 0x0328F cannot be used since the upper nibble of the |
| EventSelect bits have to be specified via bits 32-35 as can be seen with: |
| |
| cat /sys/bus/event_source/devices/cpu/format/event |
| |
| raw encoding of 0x20000038F should be used instead: |
| |
| perf stat -e r20000038f -a sleep 1 |
| perf record -e r20000038f ... |
| |
| It's also possible to use pmu syntax: |
| |
| perf record -e r20000038f -a sleep 1 |
| perf record -e cpu/r20000038f/ ... |
| perf record -e cpu/r0x20000038f/ ... |
| |
| You should refer to the processor specific documentation for getting these |
| details. Some of them are referenced in the SEE ALSO section below. |
| |
| ARBITRARY PMUS |
| -------------- |
| |
| perf also supports an extended syntax for specifying raw parameters |
| to PMUs. Using this typically requires looking up the specific event |
| in the CPU vendor specific documentation. |
| |
| The available PMUs and their raw parameters can be listed with |
| |
| ls /sys/devices/*/format |
| |
| For example the raw event "LSD.UOPS" core pmu event above could |
| be specified as |
| |
| perf stat -e cpu/event=0xa8,umask=0x1,name=LSD.UOPS_CYCLES,cmask=0x1/ ... |
| |
| or using extended name syntax |
| |
| perf stat -e cpu/event=0xa8,umask=0x1,cmask=0x1,name=\'LSD.UOPS_CYCLES:cmask=0x1\'/ ... |
| |
| PER SOCKET PMUS |
| --------------- |
| |
| Some PMUs are not associated with a core, but with a whole CPU socket. |
| Events on these PMUs generally cannot be sampled, but only counted globally |
| with perf stat -a. They can be bound to one logical CPU, but will measure |
| all the CPUs in the same socket. |
| |
| This example measures memory bandwidth every second |
| on the first memory controller on socket 0 of a Intel Xeon system |
| |
| perf stat -C 0 -a uncore_imc_0/cas_count_read/,uncore_imc_0/cas_count_write/ -I 1000 ... |
| |
| Each memory controller has its own PMU. Measuring the complete system |
| bandwidth would require specifying all imc PMUs (see perf list output), |
| and adding the values together. To simplify creation of multiple events, |
| prefix and glob matching is supported in the PMU name, and the prefix |
| 'uncore_' is also ignored when performing the match. So the command above |
| can be expanded to all memory controllers by using the syntaxes: |
| |
| perf stat -C 0 -a imc/cas_count_read/,imc/cas_count_write/ -I 1000 ... |
| perf stat -C 0 -a *imc*/cas_count_read/,*imc*/cas_count_write/ -I 1000 ... |
| |
| This example measures the combined core power every second |
| |
| perf stat -I 1000 -e power/energy-cores/ -a |
| |
| ACCESS RESTRICTIONS |
| ------------------- |
| |
| For non root users generally only context switched PMU events are available. |
| This is normally only the events in the cpu PMU, the predefined events |
| like cycles and instructions and some software events. |
| |
| Other PMUs and global measurements are normally root only. |
| Some event qualifiers, such as "any", are also root only. |
| |
| This can be overridden by setting the kernel.perf_event_paranoid |
| sysctl to -1, which allows non root to use these events. |
| |
| For accessing trace point events perf needs to have read access to |
| /sys/kernel/tracing, even when perf_event_paranoid is in a relaxed |
| setting. |
| |
| TRACING |
| ------- |
| |
| Some PMUs control advanced hardware tracing capabilities, such as Intel PT, |
| that allows low overhead execution tracing. These are described in a separate |
| intel-pt.txt document. |
| |
| PARAMETERIZED EVENTS |
| -------------------- |
| |
| Some pmu events listed by 'perf-list' will be displayed with '?' in them. For |
| example: |
| |
| hv_gpci/dtbp_ptitc,phys_processor_idx=?/ |
| |
| This means that when provided as an event, a value for '?' must |
| also be supplied. For example: |
| |
| perf stat -C 0 -e 'hv_gpci/dtbp_ptitc,phys_processor_idx=0x2/' ... |
| |
| EVENT QUALIFIERS: |
| |
| It is also possible to add extra qualifiers to an event: |
| |
| percore: |
| |
| Sums up the event counts for all hardware threads in a core, e.g.: |
| |
| |
| perf stat -e cpu/event=0,umask=0x3,percore=1/ |
| |
| |
| EVENT GROUPS |
| ------------ |
| |
| Perf supports time based multiplexing of events, when the number of events |
| active exceeds the number of hardware performance counters. Multiplexing |
| can cause measurement errors when the workload changes its execution |
| profile. |
| |
| When metrics are computed using formulas from event counts, it is useful to |
| ensure some events are always measured together as a group to minimize multiplexing |
| errors. Event groups can be specified using { }. |
| |
| perf stat -e '{instructions,cycles}' ... |
| |
| The number of available performance counters depend on the CPU. A group |
| cannot contain more events than available counters. |
| For example Intel Core CPUs typically have four generic performance counters |
| for the core, plus three fixed counters for instructions, cycles and |
| ref-cycles. Some special events have restrictions on which counter they |
| can schedule, and may not support multiple instances in a single group. |
| When too many events are specified in the group some of them will not |
| be measured. |
| |
| Globally pinned events can limit the number of counters available for |
| other groups. On x86 systems, the NMI watchdog pins a counter by default. |
| The nmi watchdog can be disabled as root with |
| |
| echo 0 > /proc/sys/kernel/nmi_watchdog |
| |
| Events from multiple different PMUs cannot be mixed in a group, with |
| some exceptions for software events. |
| |
| LEADER SAMPLING |
| --------------- |
| |
| perf also supports group leader sampling using the :S specifier. |
| |
| perf record -e '{cycles,instructions}:S' ... |
| perf report --group |
| |
| Normally all events in an event group sample, but with :S only |
| the first event (the leader) samples, and it only reads the values of the |
| other events in the group. |
| |
| However, in the case AUX area events (e.g. Intel PT or CoreSight), the AUX |
| area event must be the leader, so then the second event samples, not the first. |
| |
| OPTIONS |
| ------- |
| |
| Without options all known events will be listed. |
| |
| To limit the list use: |
| |
| . 'hw' or 'hardware' to list hardware events such as cache-misses, etc. |
| |
| . 'sw' or 'software' to list software events such as context switches, etc. |
| |
| . 'cache' or 'hwcache' to list hardware cache events such as L1-dcache-loads, etc. |
| |
| . 'tracepoint' to list all tracepoint events, alternatively use |
| 'subsys_glob:event_glob' to filter by tracepoint subsystems such as sched, |
| block, etc. |
| |
| . 'pmu' to print the kernel supplied PMU events. |
| |
| . 'sdt' to list all Statically Defined Tracepoint events. |
| |
| . 'metric' to list metrics |
| |
| . 'metricgroup' to list metricgroups with metrics. |
| |
| . If none of the above is matched, it will apply the supplied glob to all |
| events, printing the ones that match. |
| |
| . As a last resort, it will do a substring search in all event names. |
| |
| One or more types can be used at the same time, listing the events for the |
| types specified. |
| |
| Support raw format: |
| |
| . '--raw-dump', shows the raw-dump of all the events. |
| . '--raw-dump [hw|sw|cache|tracepoint|pmu|event_glob]', shows the raw-dump of |
| a certain kind of events. |
| |
| SEE ALSO |
| -------- |
| linkperf:perf-stat[1], linkperf:perf-top[1], |
| linkperf:perf-record[1], |
| http://www.intel.com/sdm/[Intel® 64 and IA-32 Architectures Software Developer's Manual Volume 3B: System Programming Guide], |
| https://bugzilla.kernel.org/show_bug.cgi?id=206537[AMD Processor Programming Reference (PPR)] |
