| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * GPIO driver for the ACCES 104-DIO-48E series |
| * Copyright (C) 2016 William Breathitt Gray |
| * |
| * This driver supports the following ACCES devices: 104-DIO-48E and |
| * 104-DIO-24E. |
| */ |
| #include <linux/bits.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/ioport.h> |
| #include <linux/irq.h> |
| #include <linux/isa.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/regmap.h> |
| #include <linux/types.h> |
| |
| #include "gpio-i8255.h" |
| |
| MODULE_IMPORT_NS(I8255); |
| |
| #define DIO48E_EXTENT 16 |
| #define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT) |
| |
| static unsigned int base[MAX_NUM_DIO48E]; |
| static unsigned int num_dio48e; |
| module_param_hw_array(base, uint, ioport, &num_dio48e, 0); |
| MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses"); |
| |
| static unsigned int irq[MAX_NUM_DIO48E]; |
| static unsigned int num_irq; |
| module_param_hw_array(irq, uint, irq, &num_irq, 0); |
| MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers"); |
| |
| #define DIO48E_ENABLE_INTERRUPT 0xB |
| #define DIO48E_DISABLE_INTERRUPT DIO48E_ENABLE_INTERRUPT |
| #define DIO48E_CLEAR_INTERRUPT 0xF |
| |
| #define DIO48E_NUM_PPI 2 |
| |
| static const struct regmap_range dio48e_wr_ranges[] = { |
| regmap_reg_range(0x0, 0x9), regmap_reg_range(0xB, 0xB), |
| regmap_reg_range(0xD, 0xD), regmap_reg_range(0xF, 0xF), |
| }; |
| static const struct regmap_range dio48e_rd_ranges[] = { |
| regmap_reg_range(0x0, 0x2), regmap_reg_range(0x4, 0x6), |
| regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD), |
| regmap_reg_range(0xF, 0xF), |
| }; |
| static const struct regmap_range dio48e_volatile_ranges[] = { |
| i8255_volatile_regmap_range(0x0), i8255_volatile_regmap_range(0x4), |
| regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD), |
| regmap_reg_range(0xF, 0xF), |
| }; |
| static const struct regmap_range dio48e_precious_ranges[] = { |
| regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD), |
| regmap_reg_range(0xF, 0xF), |
| }; |
| static const struct regmap_access_table dio48e_wr_table = { |
| .yes_ranges = dio48e_wr_ranges, |
| .n_yes_ranges = ARRAY_SIZE(dio48e_wr_ranges), |
| }; |
| static const struct regmap_access_table dio48e_rd_table = { |
| .yes_ranges = dio48e_rd_ranges, |
| .n_yes_ranges = ARRAY_SIZE(dio48e_rd_ranges), |
| }; |
| static const struct regmap_access_table dio48e_volatile_table = { |
| .yes_ranges = dio48e_volatile_ranges, |
| .n_yes_ranges = ARRAY_SIZE(dio48e_volatile_ranges), |
| }; |
| static const struct regmap_access_table dio48e_precious_table = { |
| .yes_ranges = dio48e_precious_ranges, |
| .n_yes_ranges = ARRAY_SIZE(dio48e_precious_ranges), |
| }; |
| static const struct regmap_config dio48e_regmap_config = { |
| .reg_bits = 8, |
| .reg_stride = 1, |
| .val_bits = 8, |
| .io_port = true, |
| .max_register = 0xF, |
| .wr_table = &dio48e_wr_table, |
| .rd_table = &dio48e_rd_table, |
| .volatile_table = &dio48e_volatile_table, |
| .precious_table = &dio48e_precious_table, |
| .cache_type = REGCACHE_FLAT, |
| .use_raw_spinlock = true, |
| }; |
| |
| /* only bit 3 on each respective Port C supports interrupts */ |
| #define DIO48E_REGMAP_IRQ(_ppi) \ |
| [19 + (_ppi) * 24] = { \ |
| .mask = BIT(_ppi), \ |
| .type = { .types_supported = IRQ_TYPE_EDGE_RISING }, \ |
| } |
| |
| static const struct regmap_irq dio48e_regmap_irqs[] = { |
| DIO48E_REGMAP_IRQ(0), DIO48E_REGMAP_IRQ(1), |
| }; |
| |
| static int dio48e_handle_mask_sync(struct regmap *const map, const int index, |
| const unsigned int mask_buf_def, |
| const unsigned int mask_buf, |
| void *const irq_drv_data) |
| { |
| unsigned int *const irq_mask = irq_drv_data; |
| const unsigned int prev_mask = *irq_mask; |
| int err; |
| unsigned int val; |
| |
| /* exit early if no change since the previous mask */ |
| if (mask_buf == prev_mask) |
| return 0; |
| |
| /* remember the current mask for the next mask sync */ |
| *irq_mask = mask_buf; |
| |
| /* if all previously masked, enable interrupts when unmasking */ |
| if (prev_mask == mask_buf_def) { |
| err = regmap_write(map, DIO48E_CLEAR_INTERRUPT, 0x00); |
| if (err) |
| return err; |
| return regmap_write(map, DIO48E_ENABLE_INTERRUPT, 0x00); |
| } |
| |
| /* if all are currently masked, disable interrupts */ |
| if (mask_buf == mask_buf_def) |
| return regmap_read(map, DIO48E_DISABLE_INTERRUPT, &val); |
| |
| return 0; |
| } |
| |
| #define DIO48E_NGPIO 48 |
| static const char *dio48e_names[DIO48E_NGPIO] = { |
| "PPI Group 0 Port A 0", "PPI Group 0 Port A 1", "PPI Group 0 Port A 2", |
| "PPI Group 0 Port A 3", "PPI Group 0 Port A 4", "PPI Group 0 Port A 5", |
| "PPI Group 0 Port A 6", "PPI Group 0 Port A 7", "PPI Group 0 Port B 0", |
| "PPI Group 0 Port B 1", "PPI Group 0 Port B 2", "PPI Group 0 Port B 3", |
| "PPI Group 0 Port B 4", "PPI Group 0 Port B 5", "PPI Group 0 Port B 6", |
| "PPI Group 0 Port B 7", "PPI Group 0 Port C 0", "PPI Group 0 Port C 1", |
| "PPI Group 0 Port C 2", "PPI Group 0 Port C 3", "PPI Group 0 Port C 4", |
| "PPI Group 0 Port C 5", "PPI Group 0 Port C 6", "PPI Group 0 Port C 7", |
| "PPI Group 1 Port A 0", "PPI Group 1 Port A 1", "PPI Group 1 Port A 2", |
| "PPI Group 1 Port A 3", "PPI Group 1 Port A 4", "PPI Group 1 Port A 5", |
| "PPI Group 1 Port A 6", "PPI Group 1 Port A 7", "PPI Group 1 Port B 0", |
| "PPI Group 1 Port B 1", "PPI Group 1 Port B 2", "PPI Group 1 Port B 3", |
| "PPI Group 1 Port B 4", "PPI Group 1 Port B 5", "PPI Group 1 Port B 6", |
| "PPI Group 1 Port B 7", "PPI Group 1 Port C 0", "PPI Group 1 Port C 1", |
| "PPI Group 1 Port C 2", "PPI Group 1 Port C 3", "PPI Group 1 Port C 4", |
| "PPI Group 1 Port C 5", "PPI Group 1 Port C 6", "PPI Group 1 Port C 7" |
| }; |
| |
| static int dio48e_irq_init_hw(struct regmap *const map) |
| { |
| unsigned int val; |
| |
| /* Disable IRQ by default */ |
| return regmap_read(map, DIO48E_DISABLE_INTERRUPT, &val); |
| } |
| |
| static int dio48e_probe(struct device *dev, unsigned int id) |
| { |
| const char *const name = dev_name(dev); |
| struct i8255_regmap_config config = {}; |
| void __iomem *regs; |
| struct regmap *map; |
| int err; |
| struct regmap_irq_chip *chip; |
| unsigned int irq_mask; |
| struct regmap_irq_chip_data *chip_data; |
| |
| if (!devm_request_region(dev, base[id], DIO48E_EXTENT, name)) { |
| dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", |
| base[id], base[id] + DIO48E_EXTENT); |
| return -EBUSY; |
| } |
| |
| regs = devm_ioport_map(dev, base[id], DIO48E_EXTENT); |
| if (!regs) |
| return -ENOMEM; |
| |
| map = devm_regmap_init_mmio(dev, regs, &dio48e_regmap_config); |
| if (IS_ERR(map)) |
| return dev_err_probe(dev, PTR_ERR(map), |
| "Unable to initialize register map\n"); |
| |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->irq_drv_data = devm_kzalloc(dev, sizeof(irq_mask), GFP_KERNEL); |
| if (!chip->irq_drv_data) |
| return -ENOMEM; |
| |
| chip->name = name; |
| chip->mask_base = DIO48E_ENABLE_INTERRUPT; |
| chip->ack_base = DIO48E_CLEAR_INTERRUPT; |
| chip->no_status = true; |
| chip->num_regs = 1; |
| chip->irqs = dio48e_regmap_irqs; |
| chip->num_irqs = ARRAY_SIZE(dio48e_regmap_irqs); |
| chip->handle_mask_sync = dio48e_handle_mask_sync; |
| |
| /* Initialize to prevent spurious interrupts before we're ready */ |
| err = dio48e_irq_init_hw(map); |
| if (err) |
| return err; |
| |
| err = devm_regmap_add_irq_chip(dev, map, irq[id], 0, 0, chip, &chip_data); |
| if (err) |
| return dev_err_probe(dev, err, "IRQ registration failed\n"); |
| |
| config.parent = dev; |
| config.map = map; |
| config.num_ppi = DIO48E_NUM_PPI; |
| config.names = dio48e_names; |
| config.domain = regmap_irq_get_domain(chip_data); |
| |
| return devm_i8255_regmap_register(dev, &config); |
| } |
| |
| static struct isa_driver dio48e_driver = { |
| .probe = dio48e_probe, |
| .driver = { |
| .name = "104-dio-48e" |
| }, |
| }; |
| module_isa_driver_with_irq(dio48e_driver, num_dio48e, num_irq); |
| |
| MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); |
| MODULE_DESCRIPTION("ACCES 104-DIO-48E GPIO driver"); |
| MODULE_LICENSE("GPL v2"); |