| .. SPDX-License-Identifier: GPL-2.0 |
| |
| =================== |
| ice devlink support |
| =================== |
| |
| This document describes the devlink features implemented by the ``ice`` |
| device driver. |
| |
| Parameters |
| ========== |
| |
| .. list-table:: Generic parameters implemented |
| |
| * - Name |
| - Mode |
| - Notes |
| * - ``enable_roce`` |
| - runtime |
| - mutually exclusive with ``enable_iwarp`` |
| * - ``enable_iwarp`` |
| - runtime |
| - mutually exclusive with ``enable_roce`` |
| |
| Info versions |
| ============= |
| |
| The ``ice`` driver reports the following versions |
| |
| .. list-table:: devlink info versions implemented |
| :widths: 5 5 5 90 |
| |
| * - Name |
| - Type |
| - Example |
| - Description |
| * - ``board.id`` |
| - fixed |
| - K65390-000 |
| - The Product Board Assembly (PBA) identifier of the board. |
| * - ``cgu.id`` |
| - fixed |
| - 36 |
| - The Clock Generation Unit (CGU) hardware revision identifier. |
| * - ``fw.mgmt`` |
| - running |
| - 2.1.7 |
| - 3-digit version number of the management firmware running on the |
| Embedded Management Processor of the device. It controls the PHY, |
| link, access to device resources, etc. Intel documentation refers to |
| this as the EMP firmware. |
| * - ``fw.mgmt.api`` |
| - running |
| - 1.5.1 |
| - 3-digit version number (major.minor.patch) of the API exported over |
| the AdminQ by the management firmware. Used by the driver to |
| identify what commands are supported. Historical versions of the |
| kernel only displayed a 2-digit version number (major.minor). |
| * - ``fw.mgmt.build`` |
| - running |
| - 0x305d955f |
| - Unique identifier of the source for the management firmware. |
| * - ``fw.undi`` |
| - running |
| - 1.2581.0 |
| - Version of the Option ROM containing the UEFI driver. The version is |
| reported in ``major.minor.patch`` format. The major version is |
| incremented whenever a major breaking change occurs, or when the |
| minor version would overflow. The minor version is incremented for |
| non-breaking changes and reset to 1 when the major version is |
| incremented. The patch version is normally 0 but is incremented when |
| a fix is delivered as a patch against an older base Option ROM. |
| * - ``fw.psid.api`` |
| - running |
| - 0.80 |
| - Version defining the format of the flash contents. |
| * - ``fw.bundle_id`` |
| - running |
| - 0x80002ec0 |
| - Unique identifier of the firmware image file that was loaded onto |
| the device. Also referred to as the EETRACK identifier of the NVM. |
| * - ``fw.app.name`` |
| - running |
| - ICE OS Default Package |
| - The name of the DDP package that is active in the device. The DDP |
| package is loaded by the driver during initialization. Each |
| variation of the DDP package has a unique name. |
| * - ``fw.app`` |
| - running |
| - 1.3.1.0 |
| - The version of the DDP package that is active in the device. Note |
| that both the name (as reported by ``fw.app.name``) and version are |
| required to uniquely identify the package. |
| * - ``fw.app.bundle_id`` |
| - running |
| - 0xc0000001 |
| - Unique identifier for the DDP package loaded in the device. Also |
| referred to as the DDP Track ID. Can be used to uniquely identify |
| the specific DDP package. |
| * - ``fw.netlist`` |
| - running |
| - 1.1.2000-6.7.0 |
| - The version of the netlist module. This module defines the device's |
| Ethernet capabilities and default settings, and is used by the |
| management firmware as part of managing link and device |
| connectivity. |
| * - ``fw.netlist.build`` |
| - running |
| - 0xee16ced7 |
| - The first 4 bytes of the hash of the netlist module contents. |
| * - ``fw.cgu`` |
| - running |
| - 8032.16973825.6021 |
| - The version of Clock Generation Unit (CGU). Format: |
| <CGU type>.<configuration version>.<firmware version>. |
| |
| Flash Update |
| ============ |
| |
| The ``ice`` driver implements support for flash update using the |
| ``devlink-flash`` interface. It supports updating the device flash using a |
| combined flash image that contains the ``fw.mgmt``, ``fw.undi``, and |
| ``fw.netlist`` components. |
| |
| .. list-table:: List of supported overwrite modes |
| :widths: 5 95 |
| |
| * - Bits |
| - Behavior |
| * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` |
| - Do not preserve settings stored in the flash components being |
| updated. This includes overwriting the port configuration that |
| determines the number of physical functions the device will |
| initialize with. |
| * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` and ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` |
| - Do not preserve either settings or identifiers. Overwrite everything |
| in the flash with the contents from the provided image, without |
| performing any preservation. This includes overwriting device |
| identifying fields such as the MAC address, VPD area, and device |
| serial number. It is expected that this combination be used with an |
| image customized for the specific device. |
| |
| The ice hardware does not support overwriting only identifiers while |
| preserving settings, and thus ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` on its |
| own will be rejected. If no overwrite mask is provided, the firmware will be |
| instructed to preserve all settings and identifying fields when updating. |
| |
| Reload |
| ====== |
| |
| The ``ice`` driver supports activating new firmware after a flash update |
| using ``DEVLINK_CMD_RELOAD`` with the ``DEVLINK_RELOAD_ACTION_FW_ACTIVATE`` |
| action. |
| |
| .. code:: shell |
| |
| $ devlink dev reload pci/0000:01:00.0 reload action fw_activate |
| |
| The new firmware is activated by issuing a device specific Embedded |
| Management Processor reset which requests the device to reset and reload the |
| EMP firmware image. |
| |
| The driver does not currently support reloading the driver via |
| ``DEVLINK_RELOAD_ACTION_DRIVER_REINIT``. |
| |
| Port split |
| ========== |
| |
| The ``ice`` driver supports port splitting only for port 0, as the FW has |
| a predefined set of available port split options for the whole device. |
| |
| A system reboot is required for port split to be applied. |
| |
| The following command will select the port split option with 4 ports: |
| |
| .. code:: shell |
| |
| $ devlink port split pci/0000:16:00.0/0 count 4 |
| |
| The list of all available port options will be printed to dynamic debug after |
| each ``split`` and ``unsplit`` command. The first option is the default. |
| |
| .. code:: shell |
| |
| ice 0000:16:00.0: Available port split options and max port speeds (Gbps): |
| ice 0000:16:00.0: Status Split Quad 0 Quad 1 |
| ice 0000:16:00.0: count L0 L1 L2 L3 L4 L5 L6 L7 |
| ice 0000:16:00.0: Active 2 100 - - - 100 - - - |
| ice 0000:16:00.0: 2 50 - 50 - - - - - |
| ice 0000:16:00.0: Pending 4 25 25 25 25 - - - - |
| ice 0000:16:00.0: 4 25 25 - - 25 25 - - |
| ice 0000:16:00.0: 8 10 10 10 10 10 10 10 10 |
| ice 0000:16:00.0: 1 100 - - - - - - - |
| |
| There could be multiple FW port options with the same port split count. When |
| the same port split count request is issued again, the next FW port option with |
| the same port split count will be selected. |
| |
| ``devlink port unsplit`` will select the option with a split count of 1. If |
| there is no FW option available with split count 1, you will receive an error. |
| |
| Regions |
| ======= |
| |
| The ``ice`` driver implements the following regions for accessing internal |
| device data. |
| |
| .. list-table:: regions implemented |
| :widths: 15 85 |
| |
| * - Name |
| - Description |
| * - ``nvm-flash`` |
| - The contents of the entire flash chip, sometimes referred to as |
| the device's Non Volatile Memory. |
| * - ``shadow-ram`` |
| - The contents of the Shadow RAM, which is loaded from the beginning |
| of the flash. Although the contents are primarily from the flash, |
| this area also contains data generated during device boot which is |
| not stored in flash. |
| * - ``device-caps`` |
| - The contents of the device firmware's capabilities buffer. Useful to |
| determine the current state and configuration of the device. |
| |
| Both the ``nvm-flash`` and ``shadow-ram`` regions can be accessed without a |
| snapshot. The ``device-caps`` region requires a snapshot as the contents are |
| sent by firmware and can't be split into separate reads. |
| |
| Users can request an immediate capture of a snapshot for all three regions |
| via the ``DEVLINK_CMD_REGION_NEW`` command. |
| |
| .. code:: shell |
| |
| $ devlink region show |
| pci/0000:01:00.0/nvm-flash: size 10485760 snapshot [] max 1 |
| pci/0000:01:00.0/device-caps: size 4096 snapshot [] max 10 |
| |
| $ devlink region new pci/0000:01:00.0/nvm-flash snapshot 1 |
| $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1 |
| |
| $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1 |
| 0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30 |
| 0000000000000010 0000 0000 ffff ff04 0029 8c00 0028 8cc8 |
| 0000000000000020 0016 0bb8 0016 1720 0000 0000 c00f 3ffc |
| 0000000000000030 bada cce5 bada cce5 bada cce5 bada cce5 |
| |
| $ devlink region read pci/0000:01:00.0/nvm-flash snapshot 1 address 0 length 16 |
| 0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30 |
| |
| $ devlink region delete pci/0000:01:00.0/nvm-flash snapshot 1 |
| |
| $ devlink region new pci/0000:01:00.0/device-caps snapshot 1 |
| $ devlink region dump pci/0000:01:00.0/device-caps snapshot 1 |
| 0000000000000000 01 00 01 00 00 00 00 00 01 00 00 00 00 00 00 00 |
| 0000000000000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000020 02 00 02 01 32 03 00 00 0a 00 00 00 25 00 00 00 |
| 0000000000000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000040 04 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000060 05 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000080 06 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00000000000000a0 08 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00000000000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00000000000000c0 12 00 01 00 01 00 00 00 01 00 01 00 00 00 00 00 |
| 00000000000000d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00000000000000e0 13 00 01 00 00 01 00 00 00 00 00 00 00 00 00 00 |
| 00000000000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000100 14 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000120 15 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000140 16 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000160 17 00 01 00 06 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000180 18 00 01 00 01 00 00 00 01 00 00 00 08 00 00 00 |
| 0000000000000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00000000000001a0 22 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 |
| 00000000000001b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00000000000001c0 40 00 01 00 00 08 00 00 08 00 00 00 00 00 00 00 |
| 00000000000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00000000000001e0 41 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00 |
| 00000000000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000200 42 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00 |
| 0000000000000210 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| |
| $ devlink region delete pci/0000:01:00.0/device-caps snapshot 1 |
| |
| Devlink Rate |
| ============ |
| |
| The ``ice`` driver implements devlink-rate API. It allows for offload of |
| the Hierarchical QoS to the hardware. It enables user to group Virtual |
| Functions in a tree structure and assign supported parameters: tx_share, |
| tx_max, tx_priority and tx_weight to each node in a tree. So effectively |
| user gains an ability to control how much bandwidth is allocated for each |
| VF group. This is later enforced by the HW. |
| |
| It is assumed that this feature is mutually exclusive with DCB performed |
| in FW and ADQ, or any driver feature that would trigger changes in QoS, |
| for example creation of the new traffic class. The driver will prevent DCB |
| or ADQ configuration if user started making any changes to the nodes using |
| devlink-rate API. To configure those features a driver reload is necessary. |
| Correspondingly if ADQ or DCB will get configured the driver won't export |
| hierarchy at all, or will remove the untouched hierarchy if those |
| features are enabled after the hierarchy is exported, but before any |
| changes are made. |
| |
| This feature is also dependent on switchdev being enabled in the system. |
| It's required because devlink-rate requires devlink-port objects to be |
| present, and those objects are only created in switchdev mode. |
| |
| If the driver is set to the switchdev mode, it will export internal |
| hierarchy the moment VF's are created. Root of the tree is always |
| represented by the node_0. This node can't be deleted by the user. Leaf |
| nodes and nodes with children also can't be deleted. |
| |
| .. list-table:: Attributes supported |
| :widths: 15 85 |
| |
| * - Name |
| - Description |
| * - ``tx_max`` |
| - maximum bandwidth to be consumed by the tree Node. Rate Limit is |
| an absolute number specifying a maximum amount of bytes a Node may |
| consume during the course of one second. Rate limit guarantees |
| that a link will not oversaturate the receiver on the remote end |
| and also enforces an SLA between the subscriber and network |
| provider. |
| * - ``tx_share`` |
| - minimum bandwidth allocated to a tree node when it is not blocked. |
| It specifies an absolute BW. While tx_max defines the maximum |
| bandwidth the node may consume, the tx_share marks committed BW |
| for the Node. |
| * - ``tx_priority`` |
| - allows for usage of strict priority arbiter among siblings. This |
| arbitration scheme attempts to schedule nodes based on their |
| priority as long as the nodes remain within their bandwidth limit. |
| Range 0-7. Nodes with priority 7 have the highest priority and are |
| selected first, while nodes with priority 0 have the lowest |
| priority. Nodes that have the same priority are treated equally. |
| * - ``tx_weight`` |
| - allows for usage of Weighted Fair Queuing arbitration scheme among |
| siblings. This arbitration scheme can be used simultaneously with |
| the strict priority. Range 1-200. Only relative values matter for |
| arbitration. |
| |
| ``tx_priority`` and ``tx_weight`` can be used simultaneously. In that case |
| nodes with the same priority form a WFQ subgroup in the sibling group |
| and arbitration among them is based on assigned weights. |
| |
| .. code:: shell |
| |
| # enable switchdev |
| $ devlink dev eswitch set pci/0000:4b:00.0 mode switchdev |
| |
| # at this point driver should export internal hierarchy |
| $ echo 2 > /sys/class/net/ens785np0/device/sriov_numvfs |
| |
| $ devlink port function rate show |
| pci/0000:4b:00.0/node_25: type node parent node_24 |
| pci/0000:4b:00.0/node_24: type node parent node_0 |
| pci/0000:4b:00.0/node_32: type node parent node_31 |
| pci/0000:4b:00.0/node_31: type node parent node_30 |
| pci/0000:4b:00.0/node_30: type node parent node_16 |
| pci/0000:4b:00.0/node_19: type node parent node_18 |
| pci/0000:4b:00.0/node_18: type node parent node_17 |
| pci/0000:4b:00.0/node_17: type node parent node_16 |
| pci/0000:4b:00.0/node_14: type node parent node_5 |
| pci/0000:4b:00.0/node_5: type node parent node_3 |
| pci/0000:4b:00.0/node_13: type node parent node_4 |
| pci/0000:4b:00.0/node_12: type node parent node_4 |
| pci/0000:4b:00.0/node_11: type node parent node_4 |
| pci/0000:4b:00.0/node_10: type node parent node_4 |
| pci/0000:4b:00.0/node_9: type node parent node_4 |
| pci/0000:4b:00.0/node_8: type node parent node_4 |
| pci/0000:4b:00.0/node_7: type node parent node_4 |
| pci/0000:4b:00.0/node_6: type node parent node_4 |
| pci/0000:4b:00.0/node_4: type node parent node_3 |
| pci/0000:4b:00.0/node_3: type node parent node_16 |
| pci/0000:4b:00.0/node_16: type node parent node_15 |
| pci/0000:4b:00.0/node_15: type node parent node_0 |
| pci/0000:4b:00.0/node_2: type node parent node_1 |
| pci/0000:4b:00.0/node_1: type node parent node_0 |
| pci/0000:4b:00.0/node_0: type node |
| pci/0000:4b:00.0/1: type leaf parent node_25 |
| pci/0000:4b:00.0/2: type leaf parent node_25 |
| |
| # let's create some custom node |
| $ devlink port function rate add pci/0000:4b:00.0/node_custom parent node_0 |
| |
| # second custom node |
| $ devlink port function rate add pci/0000:4b:00.0/node_custom_1 parent node_custom |
| |
| # reassign second VF to newly created branch |
| $ devlink port function rate set pci/0000:4b:00.0/2 parent node_custom_1 |
| |
| # assign tx_weight to the VF |
| $ devlink port function rate set pci/0000:4b:00.0/2 tx_weight 5 |
| |
| # assign tx_share to the VF |
| $ devlink port function rate set pci/0000:4b:00.0/2 tx_share 500Mbps |
