| // SPDX-License-Identifier: GPL-2.0-only |
| |
| #include <linux/types.h> |
| #include <linux/io.h> |
| #include <linux/bits.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| |
| #define AIROHA_GPIO_MAX 32 |
| |
| /** |
| * struct airoha_gpio_ctrl - Airoha GPIO driver data |
| * @gc: Associated gpio_chip instance. |
| * @data: The data register. |
| * @dir: [0] The direction register for the lower 16 pins. |
| * [1]: The direction register for the higher 16 pins. |
| * @output: The output enable register. |
| */ |
| struct airoha_gpio_ctrl { |
| struct gpio_chip gc; |
| void __iomem *data; |
| void __iomem *dir[2]; |
| void __iomem *output; |
| }; |
| |
| static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc) |
| { |
| return container_of(gc, struct airoha_gpio_ctrl, gc); |
| } |
| |
| static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio, |
| int val, int out) |
| { |
| struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc); |
| u32 dir = ioread32(ctrl->dir[gpio / 16]); |
| u32 output = ioread32(ctrl->output); |
| u32 mask = BIT((gpio % 16) * 2); |
| |
| if (out) { |
| dir |= mask; |
| output |= BIT(gpio); |
| } else { |
| dir &= ~mask; |
| output &= ~BIT(gpio); |
| } |
| |
| iowrite32(dir, ctrl->dir[gpio / 16]); |
| |
| if (out) |
| gc->set(gc, gpio, val); |
| |
| iowrite32(output, ctrl->output); |
| |
| return 0; |
| } |
| |
| static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio, |
| int val) |
| { |
| return airoha_dir_set(gc, gpio, val, 1); |
| } |
| |
| static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio) |
| { |
| return airoha_dir_set(gc, gpio, 0, 0); |
| } |
| |
| static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio) |
| { |
| struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc); |
| u32 dir = ioread32(ctrl->dir[gpio / 16]); |
| u32 mask = BIT((gpio % 16) * 2); |
| |
| return (dir & mask) ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; |
| } |
| |
| static int airoha_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct airoha_gpio_ctrl *ctrl; |
| int err; |
| |
| ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); |
| if (!ctrl) |
| return -ENOMEM; |
| |
| ctrl->data = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(ctrl->data)) |
| return PTR_ERR(ctrl->data); |
| |
| ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(ctrl->dir[0])) |
| return PTR_ERR(ctrl->dir[0]); |
| |
| ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2); |
| if (IS_ERR(ctrl->dir[1])) |
| return PTR_ERR(ctrl->dir[1]); |
| |
| ctrl->output = devm_platform_ioremap_resource(pdev, 3); |
| if (IS_ERR(ctrl->output)) |
| return PTR_ERR(ctrl->output); |
| |
| err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL, |
| NULL, NULL, NULL, 0); |
| if (err) |
| return dev_err_probe(dev, err, "unable to init generic GPIO"); |
| |
| ctrl->gc.ngpio = AIROHA_GPIO_MAX; |
| ctrl->gc.owner = THIS_MODULE; |
| ctrl->gc.direction_output = airoha_dir_out; |
| ctrl->gc.direction_input = airoha_dir_in; |
| ctrl->gc.get_direction = airoha_get_dir; |
| |
| return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl); |
| } |
| |
| static const struct of_device_id airoha_gpio_of_match[] = { |
| { .compatible = "airoha,en7523-gpio" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, airoha_gpio_of_match); |
| |
| static struct platform_driver airoha_gpio_driver = { |
| .driver = { |
| .name = "airoha-gpio", |
| .of_match_table = airoha_gpio_of_match, |
| }, |
| .probe = airoha_gpio_probe, |
| }; |
| module_platform_driver(airoha_gpio_driver); |
| |
| MODULE_DESCRIPTION("Airoha GPIO support"); |
| MODULE_AUTHOR("John Crispin <john@phrozen.org>"); |
| MODULE_LICENSE("GPL v2"); |