| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (c) 2020 HiSilicon Limited. */ |
| #include <linux/gpio/driver.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| |
| #define HISI_GPIO_SWPORT_DR_SET_WX 0x000 |
| #define HISI_GPIO_SWPORT_DR_CLR_WX 0x004 |
| #define HISI_GPIO_SWPORT_DDR_SET_WX 0x010 |
| #define HISI_GPIO_SWPORT_DDR_CLR_WX 0x014 |
| #define HISI_GPIO_SWPORT_DDR_ST_WX 0x018 |
| #define HISI_GPIO_INTEN_SET_WX 0x020 |
| #define HISI_GPIO_INTEN_CLR_WX 0x024 |
| #define HISI_GPIO_INTMASK_SET_WX 0x030 |
| #define HISI_GPIO_INTMASK_CLR_WX 0x034 |
| #define HISI_GPIO_INTTYPE_EDGE_SET_WX 0x040 |
| #define HISI_GPIO_INTTYPE_EDGE_CLR_WX 0x044 |
| #define HISI_GPIO_INT_POLARITY_SET_WX 0x050 |
| #define HISI_GPIO_INT_POLARITY_CLR_WX 0x054 |
| #define HISI_GPIO_DEBOUNCE_SET_WX 0x060 |
| #define HISI_GPIO_DEBOUNCE_CLR_WX 0x064 |
| #define HISI_GPIO_INTSTATUS_WX 0x070 |
| #define HISI_GPIO_PORTA_EOI_WX 0x078 |
| #define HISI_GPIO_EXT_PORT_WX 0x080 |
| #define HISI_GPIO_INTCOMB_MASK_WX 0x0a0 |
| #define HISI_GPIO_INT_DEDGE_SET 0x0b0 |
| #define HISI_GPIO_INT_DEDGE_CLR 0x0b4 |
| #define HISI_GPIO_INT_DEDGE_ST 0x0b8 |
| |
| #define HISI_GPIO_LINE_NUM_MAX 32 |
| #define HISI_GPIO_DRIVER_NAME "gpio-hisi" |
| |
| struct hisi_gpio { |
| struct gpio_chip chip; |
| struct device *dev; |
| void __iomem *reg_base; |
| unsigned int line_num; |
| int irq; |
| }; |
| |
| static inline u32 hisi_gpio_read_reg(struct gpio_chip *chip, |
| unsigned int off) |
| { |
| struct hisi_gpio *hisi_gpio = |
| container_of(chip, struct hisi_gpio, chip); |
| void __iomem *reg = hisi_gpio->reg_base + off; |
| |
| return readl(reg); |
| } |
| |
| static inline void hisi_gpio_write_reg(struct gpio_chip *chip, |
| unsigned int off, u32 val) |
| { |
| struct hisi_gpio *hisi_gpio = |
| container_of(chip, struct hisi_gpio, chip); |
| void __iomem *reg = hisi_gpio->reg_base + off; |
| |
| writel(val, reg); |
| } |
| |
| static void hisi_gpio_set_debounce(struct gpio_chip *chip, unsigned int off, |
| u32 debounce) |
| { |
| if (debounce) |
| hisi_gpio_write_reg(chip, HISI_GPIO_DEBOUNCE_SET_WX, BIT(off)); |
| else |
| hisi_gpio_write_reg(chip, HISI_GPIO_DEBOUNCE_CLR_WX, BIT(off)); |
| } |
| |
| static int hisi_gpio_set_config(struct gpio_chip *chip, unsigned int offset, |
| unsigned long config) |
| { |
| u32 config_para = pinconf_to_config_param(config); |
| u32 config_arg; |
| |
| switch (config_para) { |
| case PIN_CONFIG_INPUT_DEBOUNCE: |
| config_arg = pinconf_to_config_argument(config); |
| hisi_gpio_set_debounce(chip, offset, config_arg); |
| break; |
| default: |
| return -ENOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static void hisi_gpio_set_ack(struct irq_data *d) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(d); |
| |
| hisi_gpio_write_reg(chip, HISI_GPIO_PORTA_EOI_WX, BIT(irqd_to_hwirq(d))); |
| } |
| |
| static void hisi_gpio_irq_set_mask(struct irq_data *d) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(d); |
| |
| hisi_gpio_write_reg(chip, HISI_GPIO_INTMASK_SET_WX, BIT(irqd_to_hwirq(d))); |
| gpiochip_disable_irq(chip, irqd_to_hwirq(d)); |
| } |
| |
| static void hisi_gpio_irq_clr_mask(struct irq_data *d) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(d); |
| |
| gpiochip_enable_irq(chip, irqd_to_hwirq(d)); |
| hisi_gpio_write_reg(chip, HISI_GPIO_INTMASK_CLR_WX, BIT(irqd_to_hwirq(d))); |
| } |
| |
| static int hisi_gpio_irq_set_type(struct irq_data *d, u32 type) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(d); |
| unsigned int mask = BIT(irqd_to_hwirq(d)); |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_BOTH: |
| hisi_gpio_write_reg(chip, HISI_GPIO_INT_DEDGE_SET, mask); |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_SET_WX, mask); |
| hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_SET_WX, mask); |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_SET_WX, mask); |
| hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_CLR_WX, mask); |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_CLR_WX, mask); |
| hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_SET_WX, mask); |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| hisi_gpio_write_reg(chip, HISI_GPIO_INTTYPE_EDGE_CLR_WX, mask); |
| hisi_gpio_write_reg(chip, HISI_GPIO_INT_POLARITY_CLR_WX, mask); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* |
| * The dual-edge interrupt and other interrupt's registers do not |
| * take effect at the same time. The registers of the two-edge |
| * interrupts have higher priorities, the configuration of |
| * the dual-edge interrupts must be disabled before the configuration |
| * of other kind of interrupts. |
| */ |
| if (type != IRQ_TYPE_EDGE_BOTH) { |
| unsigned int both = hisi_gpio_read_reg(chip, HISI_GPIO_INT_DEDGE_ST); |
| |
| if (both & mask) |
| hisi_gpio_write_reg(chip, HISI_GPIO_INT_DEDGE_CLR, mask); |
| } |
| |
| if (type & IRQ_TYPE_LEVEL_MASK) |
| irq_set_handler_locked(d, handle_level_irq); |
| else if (type & IRQ_TYPE_EDGE_BOTH) |
| irq_set_handler_locked(d, handle_edge_irq); |
| |
| return 0; |
| } |
| |
| static void hisi_gpio_irq_enable(struct irq_data *d) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(d); |
| |
| hisi_gpio_irq_clr_mask(d); |
| hisi_gpio_write_reg(chip, HISI_GPIO_INTEN_SET_WX, BIT(irqd_to_hwirq(d))); |
| } |
| |
| static void hisi_gpio_irq_disable(struct irq_data *d) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(d); |
| |
| hisi_gpio_irq_set_mask(d); |
| hisi_gpio_write_reg(chip, HISI_GPIO_INTEN_CLR_WX, BIT(irqd_to_hwirq(d))); |
| } |
| |
| static void hisi_gpio_irq_handler(struct irq_desc *desc) |
| { |
| struct hisi_gpio *hisi_gpio = irq_desc_get_handler_data(desc); |
| unsigned long irq_msk = hisi_gpio_read_reg(&hisi_gpio->chip, |
| HISI_GPIO_INTSTATUS_WX); |
| struct irq_chip *irq_c = irq_desc_get_chip(desc); |
| int hwirq; |
| |
| chained_irq_enter(irq_c, desc); |
| for_each_set_bit(hwirq, &irq_msk, HISI_GPIO_LINE_NUM_MAX) |
| generic_handle_domain_irq(hisi_gpio->chip.irq.domain, |
| hwirq); |
| chained_irq_exit(irq_c, desc); |
| } |
| |
| static const struct irq_chip hisi_gpio_irq_chip = { |
| .name = "HISI-GPIO", |
| .irq_ack = hisi_gpio_set_ack, |
| .irq_mask = hisi_gpio_irq_set_mask, |
| .irq_unmask = hisi_gpio_irq_clr_mask, |
| .irq_set_type = hisi_gpio_irq_set_type, |
| .irq_enable = hisi_gpio_irq_enable, |
| .irq_disable = hisi_gpio_irq_disable, |
| .flags = IRQCHIP_IMMUTABLE, |
| GPIOCHIP_IRQ_RESOURCE_HELPERS, |
| }; |
| |
| static void hisi_gpio_init_irq(struct hisi_gpio *hisi_gpio) |
| { |
| struct gpio_chip *chip = &hisi_gpio->chip; |
| struct gpio_irq_chip *girq_chip = &chip->irq; |
| |
| gpio_irq_chip_set_chip(girq_chip, &hisi_gpio_irq_chip); |
| girq_chip->default_type = IRQ_TYPE_NONE; |
| girq_chip->num_parents = 1; |
| girq_chip->parents = &hisi_gpio->irq; |
| girq_chip->parent_handler = hisi_gpio_irq_handler; |
| girq_chip->parent_handler_data = hisi_gpio; |
| |
| /* Clear Mask of GPIO controller combine IRQ */ |
| hisi_gpio_write_reg(chip, HISI_GPIO_INTCOMB_MASK_WX, 1); |
| } |
| |
| static const struct acpi_device_id hisi_gpio_acpi_match[] = { |
| {"HISI0184", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, hisi_gpio_acpi_match); |
| |
| static const struct of_device_id hisi_gpio_dts_match[] = { |
| { .compatible = "hisilicon,ascend910-gpio", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, hisi_gpio_dts_match); |
| |
| static void hisi_gpio_get_pdata(struct device *dev, |
| struct hisi_gpio *hisi_gpio) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct fwnode_handle *fwnode; |
| int idx = 0; |
| |
| device_for_each_child_node(dev, fwnode) { |
| /* Cycle for once, no need for an array to save line_num */ |
| if (fwnode_property_read_u32(fwnode, "ngpios", |
| &hisi_gpio->line_num)) { |
| dev_err(dev, |
| "failed to get number of lines for port%d and use default value instead\n", |
| idx); |
| hisi_gpio->line_num = HISI_GPIO_LINE_NUM_MAX; |
| } |
| |
| if (WARN_ON(hisi_gpio->line_num > HISI_GPIO_LINE_NUM_MAX)) |
| hisi_gpio->line_num = HISI_GPIO_LINE_NUM_MAX; |
| |
| hisi_gpio->irq = platform_get_irq(pdev, idx); |
| |
| dev_info(dev, |
| "get hisi_gpio[%d] with %u lines\n", idx, |
| hisi_gpio->line_num); |
| |
| idx++; |
| } |
| } |
| |
| static int hisi_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct hisi_gpio *hisi_gpio; |
| int port_num; |
| int ret; |
| |
| /* |
| * One GPIO controller own one port currently, |
| * if we get more from ACPI table, return error. |
| */ |
| port_num = device_get_child_node_count(dev); |
| if (WARN_ON(port_num != 1)) |
| return -ENODEV; |
| |
| hisi_gpio = devm_kzalloc(dev, sizeof(*hisi_gpio), GFP_KERNEL); |
| if (!hisi_gpio) |
| return -ENOMEM; |
| |
| hisi_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(hisi_gpio->reg_base)) |
| return PTR_ERR(hisi_gpio->reg_base); |
| |
| hisi_gpio_get_pdata(dev, hisi_gpio); |
| |
| hisi_gpio->dev = dev; |
| |
| ret = bgpio_init(&hisi_gpio->chip, hisi_gpio->dev, 0x4, |
| hisi_gpio->reg_base + HISI_GPIO_EXT_PORT_WX, |
| hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_SET_WX, |
| hisi_gpio->reg_base + HISI_GPIO_SWPORT_DR_CLR_WX, |
| hisi_gpio->reg_base + HISI_GPIO_SWPORT_DDR_SET_WX, |
| hisi_gpio->reg_base + HISI_GPIO_SWPORT_DDR_CLR_WX, |
| BGPIOF_NO_SET_ON_INPUT); |
| if (ret) { |
| dev_err(dev, "failed to init, ret = %d\n", ret); |
| return ret; |
| } |
| |
| hisi_gpio->chip.set_config = hisi_gpio_set_config; |
| hisi_gpio->chip.ngpio = hisi_gpio->line_num; |
| hisi_gpio->chip.bgpio_dir_unreadable = 1; |
| hisi_gpio->chip.base = -1; |
| |
| if (hisi_gpio->irq > 0) |
| hisi_gpio_init_irq(hisi_gpio); |
| |
| ret = devm_gpiochip_add_data(dev, &hisi_gpio->chip, hisi_gpio); |
| if (ret) { |
| dev_err(dev, "failed to register gpiochip, ret = %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver hisi_gpio_driver = { |
| .driver = { |
| .name = HISI_GPIO_DRIVER_NAME, |
| .acpi_match_table = hisi_gpio_acpi_match, |
| .of_match_table = hisi_gpio_dts_match, |
| }, |
| .probe = hisi_gpio_probe, |
| }; |
| |
| module_platform_driver(hisi_gpio_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Luo Jiaxing <luojiaxing@huawei.com>"); |
| MODULE_DESCRIPTION("HiSilicon GPIO controller driver"); |
| MODULE_ALIAS("platform:" HISI_GPIO_DRIVER_NAME); |