| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * PWM vibrator driver |
| * |
| * Copyright (C) 2017 Collabora Ltd. |
| * |
| * Based on previous work from: |
| * Copyright (C) 2012 Dmitry Torokhov <dmitry.torokhov@gmail.com> |
| * |
| * Based on PWM beeper driver: |
| * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/input.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/pwm.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| |
| struct pwm_vibrator { |
| struct input_dev *input; |
| struct gpio_desc *enable_gpio; |
| struct pwm_device *pwm; |
| struct pwm_device *pwm_dir; |
| struct regulator *vcc; |
| |
| struct work_struct play_work; |
| u16 level; |
| u32 direction_duty_cycle; |
| bool vcc_on; |
| }; |
| |
| static int pwm_vibrator_start(struct pwm_vibrator *vibrator) |
| { |
| struct device *pdev = vibrator->input->dev.parent; |
| struct pwm_state state; |
| int err; |
| |
| if (!vibrator->vcc_on) { |
| err = regulator_enable(vibrator->vcc); |
| if (err) { |
| dev_err(pdev, "failed to enable regulator: %d\n", err); |
| return err; |
| } |
| vibrator->vcc_on = true; |
| } |
| |
| gpiod_set_value_cansleep(vibrator->enable_gpio, 1); |
| |
| pwm_get_state(vibrator->pwm, &state); |
| pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff); |
| state.enabled = true; |
| |
| err = pwm_apply_might_sleep(vibrator->pwm, &state); |
| if (err) { |
| dev_err(pdev, "failed to apply pwm state: %d\n", err); |
| return err; |
| } |
| |
| if (vibrator->pwm_dir) { |
| pwm_get_state(vibrator->pwm_dir, &state); |
| state.duty_cycle = vibrator->direction_duty_cycle; |
| state.enabled = true; |
| |
| err = pwm_apply_might_sleep(vibrator->pwm_dir, &state); |
| if (err) { |
| dev_err(pdev, "failed to apply dir-pwm state: %d\n", err); |
| pwm_disable(vibrator->pwm); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void pwm_vibrator_stop(struct pwm_vibrator *vibrator) |
| { |
| if (vibrator->pwm_dir) |
| pwm_disable(vibrator->pwm_dir); |
| pwm_disable(vibrator->pwm); |
| |
| gpiod_set_value_cansleep(vibrator->enable_gpio, 0); |
| |
| if (vibrator->vcc_on) { |
| regulator_disable(vibrator->vcc); |
| vibrator->vcc_on = false; |
| } |
| } |
| |
| static void pwm_vibrator_play_work(struct work_struct *work) |
| { |
| struct pwm_vibrator *vibrator = container_of(work, |
| struct pwm_vibrator, play_work); |
| |
| if (vibrator->level) |
| pwm_vibrator_start(vibrator); |
| else |
| pwm_vibrator_stop(vibrator); |
| } |
| |
| static int pwm_vibrator_play_effect(struct input_dev *dev, void *data, |
| struct ff_effect *effect) |
| { |
| struct pwm_vibrator *vibrator = input_get_drvdata(dev); |
| |
| vibrator->level = effect->u.rumble.strong_magnitude; |
| if (!vibrator->level) |
| vibrator->level = effect->u.rumble.weak_magnitude; |
| |
| schedule_work(&vibrator->play_work); |
| |
| return 0; |
| } |
| |
| static void pwm_vibrator_close(struct input_dev *input) |
| { |
| struct pwm_vibrator *vibrator = input_get_drvdata(input); |
| |
| cancel_work_sync(&vibrator->play_work); |
| pwm_vibrator_stop(vibrator); |
| } |
| |
| static int pwm_vibrator_probe(struct platform_device *pdev) |
| { |
| struct pwm_vibrator *vibrator; |
| struct pwm_state state; |
| int err; |
| |
| vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL); |
| if (!vibrator) |
| return -ENOMEM; |
| |
| vibrator->input = devm_input_allocate_device(&pdev->dev); |
| if (!vibrator->input) |
| return -ENOMEM; |
| |
| vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc"); |
| if (IS_ERR(vibrator->vcc)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(vibrator->vcc), |
| "Failed to request regulator\n"); |
| |
| vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(vibrator->enable_gpio)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(vibrator->enable_gpio), |
| "Failed to request enable gpio\n"); |
| |
| vibrator->pwm = devm_pwm_get(&pdev->dev, "enable"); |
| if (IS_ERR(vibrator->pwm)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(vibrator->pwm), |
| "Failed to request main pwm\n"); |
| |
| INIT_WORK(&vibrator->play_work, pwm_vibrator_play_work); |
| |
| /* Sync up PWM state and ensure it is off. */ |
| pwm_init_state(vibrator->pwm, &state); |
| state.enabled = false; |
| err = pwm_apply_might_sleep(vibrator->pwm, &state); |
| if (err) { |
| dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", |
| err); |
| return err; |
| } |
| |
| vibrator->pwm_dir = devm_pwm_get(&pdev->dev, "direction"); |
| err = PTR_ERR_OR_ZERO(vibrator->pwm_dir); |
| switch (err) { |
| case 0: |
| /* Sync up PWM state and ensure it is off. */ |
| pwm_init_state(vibrator->pwm_dir, &state); |
| state.enabled = false; |
| err = pwm_apply_might_sleep(vibrator->pwm_dir, &state); |
| if (err) { |
| dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", |
| err); |
| return err; |
| } |
| |
| vibrator->direction_duty_cycle = |
| pwm_get_period(vibrator->pwm_dir) / 2; |
| device_property_read_u32(&pdev->dev, "direction-duty-cycle-ns", |
| &vibrator->direction_duty_cycle); |
| break; |
| |
| case -ENODATA: |
| /* Direction PWM is optional */ |
| vibrator->pwm_dir = NULL; |
| break; |
| |
| default: |
| dev_err(&pdev->dev, "Failed to request direction pwm: %d\n", err); |
| fallthrough; |
| |
| case -EPROBE_DEFER: |
| return err; |
| } |
| |
| vibrator->input->name = "pwm-vibrator"; |
| vibrator->input->id.bustype = BUS_HOST; |
| vibrator->input->dev.parent = &pdev->dev; |
| vibrator->input->close = pwm_vibrator_close; |
| |
| input_set_drvdata(vibrator->input, vibrator); |
| input_set_capability(vibrator->input, EV_FF, FF_RUMBLE); |
| |
| err = input_ff_create_memless(vibrator->input, NULL, |
| pwm_vibrator_play_effect); |
| if (err) { |
| dev_err(&pdev->dev, "Couldn't create FF dev: %d\n", err); |
| return err; |
| } |
| |
| err = input_register_device(vibrator->input); |
| if (err) { |
| dev_err(&pdev->dev, "Couldn't register input dev: %d\n", err); |
| return err; |
| } |
| |
| platform_set_drvdata(pdev, vibrator); |
| |
| return 0; |
| } |
| |
| static int pwm_vibrator_suspend(struct device *dev) |
| { |
| struct pwm_vibrator *vibrator = dev_get_drvdata(dev); |
| |
| cancel_work_sync(&vibrator->play_work); |
| if (vibrator->level) |
| pwm_vibrator_stop(vibrator); |
| |
| return 0; |
| } |
| |
| static int pwm_vibrator_resume(struct device *dev) |
| { |
| struct pwm_vibrator *vibrator = dev_get_drvdata(dev); |
| |
| if (vibrator->level) |
| pwm_vibrator_start(vibrator); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(pwm_vibrator_pm_ops, |
| pwm_vibrator_suspend, pwm_vibrator_resume); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id pwm_vibra_dt_match_table[] = { |
| { .compatible = "pwm-vibrator" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, pwm_vibra_dt_match_table); |
| #endif |
| |
| static struct platform_driver pwm_vibrator_driver = { |
| .probe = pwm_vibrator_probe, |
| .driver = { |
| .name = "pwm-vibrator", |
| .pm = pm_sleep_ptr(&pwm_vibrator_pm_ops), |
| .of_match_table = of_match_ptr(pwm_vibra_dt_match_table), |
| }, |
| }; |
| module_platform_driver(pwm_vibrator_driver); |
| |
| MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>"); |
| MODULE_DESCRIPTION("PWM vibrator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pwm-vibrator"); |