| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * emac-rockchip.c - Rockchip EMAC specific glue layer |
| * |
| * Copyright (C) 2014 Romain Perier <romain.perier@gmail.com> |
| */ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of_net.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "emac.h" |
| |
| #define DRV_NAME "rockchip_emac" |
| |
| struct emac_rockchip_soc_data { |
| unsigned int grf_offset; |
| unsigned int grf_mode_offset; |
| unsigned int grf_speed_offset; |
| bool need_div_macclk; |
| }; |
| |
| struct rockchip_priv_data { |
| struct arc_emac_priv emac; |
| struct regmap *grf; |
| const struct emac_rockchip_soc_data *soc_data; |
| struct regulator *regulator; |
| struct clk *refclk; |
| struct clk *macclk; |
| }; |
| |
| static void emac_rockchip_set_mac_speed(void *priv, unsigned int speed) |
| { |
| struct rockchip_priv_data *emac = priv; |
| u32 speed_offset = emac->soc_data->grf_speed_offset; |
| u32 data; |
| int err = 0; |
| |
| switch (speed) { |
| case 10: |
| data = (1 << (speed_offset + 16)) | (0 << speed_offset); |
| break; |
| case 100: |
| data = (1 << (speed_offset + 16)) | (1 << speed_offset); |
| break; |
| default: |
| pr_err("speed %u not supported\n", speed); |
| return; |
| } |
| |
| err = regmap_write(emac->grf, emac->soc_data->grf_offset, data); |
| if (err) |
| pr_err("unable to apply speed %u to grf (%d)\n", speed, err); |
| } |
| |
| static const struct emac_rockchip_soc_data emac_rk3036_emac_data = { |
| .grf_offset = 0x140, .grf_mode_offset = 8, |
| .grf_speed_offset = 9, .need_div_macclk = 1, |
| }; |
| |
| static const struct emac_rockchip_soc_data emac_rk3066_emac_data = { |
| .grf_offset = 0x154, .grf_mode_offset = 0, |
| .grf_speed_offset = 1, .need_div_macclk = 0, |
| }; |
| |
| static const struct emac_rockchip_soc_data emac_rk3188_emac_data = { |
| .grf_offset = 0x0a4, .grf_mode_offset = 0, |
| .grf_speed_offset = 1, .need_div_macclk = 0, |
| }; |
| |
| static const struct of_device_id emac_rockchip_dt_ids[] = { |
| { |
| .compatible = "rockchip,rk3036-emac", |
| .data = &emac_rk3036_emac_data, |
| }, |
| { |
| .compatible = "rockchip,rk3066-emac", |
| .data = &emac_rk3066_emac_data, |
| }, |
| { |
| .compatible = "rockchip,rk3188-emac", |
| .data = &emac_rk3188_emac_data, |
| }, |
| { /* Sentinel */ } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, emac_rockchip_dt_ids); |
| |
| static int emac_rockchip_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct net_device *ndev; |
| struct rockchip_priv_data *priv; |
| const struct of_device_id *match; |
| phy_interface_t interface; |
| u32 data; |
| int err; |
| |
| if (!pdev->dev.of_node) |
| return -ENODEV; |
| |
| ndev = alloc_etherdev(sizeof(struct rockchip_priv_data)); |
| if (!ndev) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, ndev); |
| SET_NETDEV_DEV(ndev, dev); |
| |
| priv = netdev_priv(ndev); |
| priv->emac.drv_name = DRV_NAME; |
| priv->emac.set_mac_speed = emac_rockchip_set_mac_speed; |
| |
| err = of_get_phy_mode(dev->of_node, &interface); |
| if (err) |
| goto out_netdev; |
| |
| /* RK3036/RK3066/RK3188 SoCs only support RMII */ |
| if (interface != PHY_INTERFACE_MODE_RMII) { |
| dev_err(dev, "unsupported phy interface mode %d\n", interface); |
| err = -ENOTSUPP; |
| goto out_netdev; |
| } |
| |
| priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node, |
| "rockchip,grf"); |
| if (IS_ERR(priv->grf)) { |
| dev_err(dev, "failed to retrieve global register file (%ld)\n", |
| PTR_ERR(priv->grf)); |
| err = PTR_ERR(priv->grf); |
| goto out_netdev; |
| } |
| |
| match = of_match_node(emac_rockchip_dt_ids, dev->of_node); |
| priv->soc_data = match->data; |
| |
| priv->emac.clk = devm_clk_get(dev, "hclk"); |
| if (IS_ERR(priv->emac.clk)) { |
| dev_err(dev, "failed to retrieve host clock (%ld)\n", |
| PTR_ERR(priv->emac.clk)); |
| err = PTR_ERR(priv->emac.clk); |
| goto out_netdev; |
| } |
| |
| priv->refclk = devm_clk_get(dev, "macref"); |
| if (IS_ERR(priv->refclk)) { |
| dev_err(dev, "failed to retrieve reference clock (%ld)\n", |
| PTR_ERR(priv->refclk)); |
| err = PTR_ERR(priv->refclk); |
| goto out_netdev; |
| } |
| |
| err = clk_prepare_enable(priv->refclk); |
| if (err) { |
| dev_err(dev, "failed to enable reference clock (%d)\n", err); |
| goto out_netdev; |
| } |
| |
| /* Optional regulator for PHY */ |
| priv->regulator = devm_regulator_get_optional(dev, "phy"); |
| if (IS_ERR(priv->regulator)) { |
| if (PTR_ERR(priv->regulator) == -EPROBE_DEFER) { |
| err = -EPROBE_DEFER; |
| goto out_clk_disable; |
| } |
| dev_err(dev, "no regulator found\n"); |
| priv->regulator = NULL; |
| } |
| |
| if (priv->regulator) { |
| err = regulator_enable(priv->regulator); |
| if (err) { |
| dev_err(dev, "failed to enable phy-supply (%d)\n", err); |
| goto out_clk_disable; |
| } |
| } |
| |
| /* Set speed 100M */ |
| data = (1 << (priv->soc_data->grf_speed_offset + 16)) | |
| (1 << priv->soc_data->grf_speed_offset); |
| /* Set RMII mode */ |
| data |= (1 << (priv->soc_data->grf_mode_offset + 16)) | |
| (0 << priv->soc_data->grf_mode_offset); |
| |
| err = regmap_write(priv->grf, priv->soc_data->grf_offset, data); |
| if (err) { |
| dev_err(dev, "unable to apply initial settings to grf (%d)\n", |
| err); |
| goto out_regulator_disable; |
| } |
| |
| /* RMII interface needs always a rate of 50MHz */ |
| err = clk_set_rate(priv->refclk, 50000000); |
| if (err) { |
| dev_err(dev, |
| "failed to change reference clock rate (%d)\n", err); |
| goto out_regulator_disable; |
| } |
| |
| if (priv->soc_data->need_div_macclk) { |
| priv->macclk = devm_clk_get(dev, "macclk"); |
| if (IS_ERR(priv->macclk)) { |
| dev_err(dev, "failed to retrieve mac clock (%ld)\n", |
| PTR_ERR(priv->macclk)); |
| err = PTR_ERR(priv->macclk); |
| goto out_regulator_disable; |
| } |
| |
| err = clk_prepare_enable(priv->macclk); |
| if (err) { |
| dev_err(dev, "failed to enable mac clock (%d)\n", err); |
| goto out_regulator_disable; |
| } |
| |
| /* RMII TX/RX needs always a rate of 25MHz */ |
| err = clk_set_rate(priv->macclk, 25000000); |
| if (err) { |
| dev_err(dev, |
| "failed to change mac clock rate (%d)\n", err); |
| goto out_clk_disable_macclk; |
| } |
| } |
| |
| err = arc_emac_probe(ndev, interface); |
| if (err) { |
| dev_err(dev, "failed to probe arc emac (%d)\n", err); |
| goto out_clk_disable_macclk; |
| } |
| |
| return 0; |
| |
| out_clk_disable_macclk: |
| if (priv->soc_data->need_div_macclk) |
| clk_disable_unprepare(priv->macclk); |
| out_regulator_disable: |
| if (priv->regulator) |
| regulator_disable(priv->regulator); |
| out_clk_disable: |
| clk_disable_unprepare(priv->refclk); |
| out_netdev: |
| free_netdev(ndev); |
| return err; |
| } |
| |
| static void emac_rockchip_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct rockchip_priv_data *priv = netdev_priv(ndev); |
| |
| arc_emac_remove(ndev); |
| |
| clk_disable_unprepare(priv->refclk); |
| |
| if (priv->regulator) |
| regulator_disable(priv->regulator); |
| |
| if (priv->soc_data->need_div_macclk) |
| clk_disable_unprepare(priv->macclk); |
| |
| free_netdev(ndev); |
| } |
| |
| static struct platform_driver emac_rockchip_driver = { |
| .probe = emac_rockchip_probe, |
| .remove_new = emac_rockchip_remove, |
| .driver = { |
| .name = DRV_NAME, |
| .of_match_table = emac_rockchip_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(emac_rockchip_driver); |
| |
| MODULE_AUTHOR("Romain Perier <romain.perier@gmail.com>"); |
| MODULE_DESCRIPTION("Rockchip EMAC platform driver"); |
| MODULE_LICENSE("GPL"); |