| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (c) 2018, Intel Corporation. */ |
| |
| #include "ice_lib.h" |
| #include "ice_switch.h" |
| |
| #define ICE_ETH_DA_OFFSET 0 |
| #define ICE_ETH_ETHTYPE_OFFSET 12 |
| #define ICE_ETH_VLAN_TCI_OFFSET 14 |
| #define ICE_MAX_VLAN_ID 0xFFF |
| |
| /* Dummy ethernet header needed in the ice_aqc_sw_rules_elem |
| * struct to configure any switch filter rules. |
| * {DA (6 bytes), SA(6 bytes), |
| * Ether type (2 bytes for header without VLAN tag) OR |
| * VLAN tag (4 bytes for header with VLAN tag) } |
| * |
| * Word on Hardcoded values |
| * byte 0 = 0x2: to identify it as locally administered DA MAC |
| * byte 6 = 0x2: to identify it as locally administered SA MAC |
| * byte 12 = 0x81 & byte 13 = 0x00: |
| * In case of VLAN filter first two bytes defines ether type (0x8100) |
| * and remaining two bytes are placeholder for programming a given VLAN ID |
| * In case of Ether type filter it is treated as header without VLAN tag |
| * and byte 12 and 13 is used to program a given Ether type instead |
| */ |
| #define DUMMY_ETH_HDR_LEN 16 |
| static const u8 dummy_eth_header[DUMMY_ETH_HDR_LEN] = { 0x2, 0, 0, 0, 0, 0, |
| 0x2, 0, 0, 0, 0, 0, |
| 0x81, 0, 0, 0}; |
| |
| #define ICE_SW_RULE_RX_TX_ETH_HDR_SIZE \ |
| (offsetof(struct ice_aqc_sw_rules_elem, pdata.lkup_tx_rx.hdr) + \ |
| (DUMMY_ETH_HDR_LEN * \ |
| sizeof(((struct ice_sw_rule_lkup_rx_tx *)0)->hdr[0]))) |
| #define ICE_SW_RULE_RX_TX_NO_HDR_SIZE \ |
| (offsetof(struct ice_aqc_sw_rules_elem, pdata.lkup_tx_rx.hdr)) |
| #define ICE_SW_RULE_LG_ACT_SIZE(n) \ |
| (offsetof(struct ice_aqc_sw_rules_elem, pdata.lg_act.act) + \ |
| ((n) * sizeof(((struct ice_sw_rule_lg_act *)0)->act[0]))) |
| #define ICE_SW_RULE_VSI_LIST_SIZE(n) \ |
| (offsetof(struct ice_aqc_sw_rules_elem, pdata.vsi_list.vsi) + \ |
| ((n) * sizeof(((struct ice_sw_rule_vsi_list *)0)->vsi[0]))) |
| |
| /** |
| * ice_init_def_sw_recp - initialize the recipe book keeping tables |
| * @hw: pointer to the HW struct |
| * |
| * Allocate memory for the entire recipe table and initialize the structures/ |
| * entries corresponding to basic recipes. |
| */ |
| enum ice_status ice_init_def_sw_recp(struct ice_hw *hw) |
| { |
| struct ice_sw_recipe *recps; |
| u8 i; |
| |
| recps = devm_kcalloc(ice_hw_to_dev(hw), ICE_MAX_NUM_RECIPES, |
| sizeof(*recps), GFP_KERNEL); |
| if (!recps) |
| return ICE_ERR_NO_MEMORY; |
| |
| for (i = 0; i < ICE_SW_LKUP_LAST; i++) { |
| recps[i].root_rid = i; |
| INIT_LIST_HEAD(&recps[i].filt_rules); |
| INIT_LIST_HEAD(&recps[i].filt_replay_rules); |
| mutex_init(&recps[i].filt_rule_lock); |
| } |
| |
| hw->switch_info->recp_list = recps; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_aq_get_sw_cfg - get switch configuration |
| * @hw: pointer to the hardware structure |
| * @buf: pointer to the result buffer |
| * @buf_size: length of the buffer available for response |
| * @req_desc: pointer to requested descriptor |
| * @num_elems: pointer to number of elements |
| * @cd: pointer to command details structure or NULL |
| * |
| * Get switch configuration (0x0200) to be placed in buf. |
| * This admin command returns information such as initial VSI/port number |
| * and switch ID it belongs to. |
| * |
| * NOTE: *req_desc is both an input/output parameter. |
| * The caller of this function first calls this function with *request_desc set |
| * to 0. If the response from f/w has *req_desc set to 0, all the switch |
| * configuration information has been returned; if non-zero (meaning not all |
| * the information was returned), the caller should call this function again |
| * with *req_desc set to the previous value returned by f/w to get the |
| * next block of switch configuration information. |
| * |
| * *num_elems is output only parameter. This reflects the number of elements |
| * in response buffer. The caller of this function to use *num_elems while |
| * parsing the response buffer. |
| */ |
| static enum ice_status |
| ice_aq_get_sw_cfg(struct ice_hw *hw, struct ice_aqc_get_sw_cfg_resp_elem *buf, |
| u16 buf_size, u16 *req_desc, u16 *num_elems, |
| struct ice_sq_cd *cd) |
| { |
| struct ice_aqc_get_sw_cfg *cmd; |
| struct ice_aq_desc desc; |
| enum ice_status status; |
| |
| ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_sw_cfg); |
| cmd = &desc.params.get_sw_conf; |
| cmd->element = cpu_to_le16(*req_desc); |
| |
| status = ice_aq_send_cmd(hw, &desc, buf, buf_size, cd); |
| if (!status) { |
| *req_desc = le16_to_cpu(cmd->element); |
| *num_elems = le16_to_cpu(cmd->num_elems); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * ice_aq_add_vsi |
| * @hw: pointer to the HW struct |
| * @vsi_ctx: pointer to a VSI context struct |
| * @cd: pointer to command details structure or NULL |
| * |
| * Add a VSI context to the hardware (0x0210) |
| */ |
| static enum ice_status |
| ice_aq_add_vsi(struct ice_hw *hw, struct ice_vsi_ctx *vsi_ctx, |
| struct ice_sq_cd *cd) |
| { |
| struct ice_aqc_add_update_free_vsi_resp *res; |
| struct ice_aqc_add_get_update_free_vsi *cmd; |
| struct ice_aq_desc desc; |
| enum ice_status status; |
| |
| cmd = &desc.params.vsi_cmd; |
| res = &desc.params.add_update_free_vsi_res; |
| |
| ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_add_vsi); |
| |
| if (!vsi_ctx->alloc_from_pool) |
| cmd->vsi_num = cpu_to_le16(vsi_ctx->vsi_num | |
| ICE_AQ_VSI_IS_VALID); |
| cmd->vf_id = vsi_ctx->vf_num; |
| |
| cmd->vsi_flags = cpu_to_le16(vsi_ctx->flags); |
| |
| desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD); |
| |
| status = ice_aq_send_cmd(hw, &desc, &vsi_ctx->info, |
| sizeof(vsi_ctx->info), cd); |
| |
| if (!status) { |
| vsi_ctx->vsi_num = le16_to_cpu(res->vsi_num) & ICE_AQ_VSI_NUM_M; |
| vsi_ctx->vsis_allocd = le16_to_cpu(res->vsi_used); |
| vsi_ctx->vsis_unallocated = le16_to_cpu(res->vsi_free); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * ice_aq_free_vsi |
| * @hw: pointer to the HW struct |
| * @vsi_ctx: pointer to a VSI context struct |
| * @keep_vsi_alloc: keep VSI allocation as part of this PF's resources |
| * @cd: pointer to command details structure or NULL |
| * |
| * Free VSI context info from hardware (0x0213) |
| */ |
| static enum ice_status |
| ice_aq_free_vsi(struct ice_hw *hw, struct ice_vsi_ctx *vsi_ctx, |
| bool keep_vsi_alloc, struct ice_sq_cd *cd) |
| { |
| struct ice_aqc_add_update_free_vsi_resp *resp; |
| struct ice_aqc_add_get_update_free_vsi *cmd; |
| struct ice_aq_desc desc; |
| enum ice_status status; |
| |
| cmd = &desc.params.vsi_cmd; |
| resp = &desc.params.add_update_free_vsi_res; |
| |
| ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_free_vsi); |
| |
| cmd->vsi_num = cpu_to_le16(vsi_ctx->vsi_num | ICE_AQ_VSI_IS_VALID); |
| if (keep_vsi_alloc) |
| cmd->cmd_flags = cpu_to_le16(ICE_AQ_VSI_KEEP_ALLOC); |
| |
| status = ice_aq_send_cmd(hw, &desc, NULL, 0, cd); |
| if (!status) { |
| vsi_ctx->vsis_allocd = le16_to_cpu(resp->vsi_used); |
| vsi_ctx->vsis_unallocated = le16_to_cpu(resp->vsi_free); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * ice_aq_update_vsi |
| * @hw: pointer to the HW struct |
| * @vsi_ctx: pointer to a VSI context struct |
| * @cd: pointer to command details structure or NULL |
| * |
| * Update VSI context in the hardware (0x0211) |
| */ |
| static enum ice_status |
| ice_aq_update_vsi(struct ice_hw *hw, struct ice_vsi_ctx *vsi_ctx, |
| struct ice_sq_cd *cd) |
| { |
| struct ice_aqc_add_update_free_vsi_resp *resp; |
| struct ice_aqc_add_get_update_free_vsi *cmd; |
| struct ice_aq_desc desc; |
| enum ice_status status; |
| |
| cmd = &desc.params.vsi_cmd; |
| resp = &desc.params.add_update_free_vsi_res; |
| |
| ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_update_vsi); |
| |
| cmd->vsi_num = cpu_to_le16(vsi_ctx->vsi_num | ICE_AQ_VSI_IS_VALID); |
| |
| desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD); |
| |
| status = ice_aq_send_cmd(hw, &desc, &vsi_ctx->info, |
| sizeof(vsi_ctx->info), cd); |
| |
| if (!status) { |
| vsi_ctx->vsis_allocd = le16_to_cpu(resp->vsi_used); |
| vsi_ctx->vsis_unallocated = le16_to_cpu(resp->vsi_free); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * ice_is_vsi_valid - check whether the VSI is valid or not |
| * @hw: pointer to the HW struct |
| * @vsi_handle: VSI handle |
| * |
| * check whether the VSI is valid or not |
| */ |
| bool ice_is_vsi_valid(struct ice_hw *hw, u16 vsi_handle) |
| { |
| return vsi_handle < ICE_MAX_VSI && hw->vsi_ctx[vsi_handle]; |
| } |
| |
| /** |
| * ice_get_hw_vsi_num - return the HW VSI number |
| * @hw: pointer to the HW struct |
| * @vsi_handle: VSI handle |
| * |
| * return the HW VSI number |
| * Caution: call this function only if VSI is valid (ice_is_vsi_valid) |
| */ |
| u16 ice_get_hw_vsi_num(struct ice_hw *hw, u16 vsi_handle) |
| { |
| return hw->vsi_ctx[vsi_handle]->vsi_num; |
| } |
| |
| /** |
| * ice_get_vsi_ctx - return the VSI context entry for a given VSI handle |
| * @hw: pointer to the HW struct |
| * @vsi_handle: VSI handle |
| * |
| * return the VSI context entry for a given VSI handle |
| */ |
| struct ice_vsi_ctx *ice_get_vsi_ctx(struct ice_hw *hw, u16 vsi_handle) |
| { |
| return (vsi_handle >= ICE_MAX_VSI) ? NULL : hw->vsi_ctx[vsi_handle]; |
| } |
| |
| /** |
| * ice_save_vsi_ctx - save the VSI context for a given VSI handle |
| * @hw: pointer to the HW struct |
| * @vsi_handle: VSI handle |
| * @vsi: VSI context pointer |
| * |
| * save the VSI context entry for a given VSI handle |
| */ |
| static void |
| ice_save_vsi_ctx(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi) |
| { |
| hw->vsi_ctx[vsi_handle] = vsi; |
| } |
| |
| /** |
| * ice_clear_vsi_q_ctx - clear VSI queue contexts for all TCs |
| * @hw: pointer to the HW struct |
| * @vsi_handle: VSI handle |
| */ |
| static void ice_clear_vsi_q_ctx(struct ice_hw *hw, u16 vsi_handle) |
| { |
| struct ice_vsi_ctx *vsi; |
| u8 i; |
| |
| vsi = ice_get_vsi_ctx(hw, vsi_handle); |
| if (!vsi) |
| return; |
| ice_for_each_traffic_class(i) { |
| if (vsi->lan_q_ctx[i]) { |
| devm_kfree(ice_hw_to_dev(hw), vsi->lan_q_ctx[i]); |
| vsi->lan_q_ctx[i] = NULL; |
| } |
| if (vsi->rdma_q_ctx[i]) { |
| devm_kfree(ice_hw_to_dev(hw), vsi->rdma_q_ctx[i]); |
| vsi->rdma_q_ctx[i] = NULL; |
| } |
| } |
| } |
| |
| /** |
| * ice_clear_vsi_ctx - clear the VSI context entry |
| * @hw: pointer to the HW struct |
| * @vsi_handle: VSI handle |
| * |
| * clear the VSI context entry |
| */ |
| static void ice_clear_vsi_ctx(struct ice_hw *hw, u16 vsi_handle) |
| { |
| struct ice_vsi_ctx *vsi; |
| |
| vsi = ice_get_vsi_ctx(hw, vsi_handle); |
| if (vsi) { |
| ice_clear_vsi_q_ctx(hw, vsi_handle); |
| devm_kfree(ice_hw_to_dev(hw), vsi); |
| hw->vsi_ctx[vsi_handle] = NULL; |
| } |
| } |
| |
| /** |
| * ice_clear_all_vsi_ctx - clear all the VSI context entries |
| * @hw: pointer to the HW struct |
| */ |
| void ice_clear_all_vsi_ctx(struct ice_hw *hw) |
| { |
| u16 i; |
| |
| for (i = 0; i < ICE_MAX_VSI; i++) |
| ice_clear_vsi_ctx(hw, i); |
| } |
| |
| /** |
| * ice_add_vsi - add VSI context to the hardware and VSI handle list |
| * @hw: pointer to the HW struct |
| * @vsi_handle: unique VSI handle provided by drivers |
| * @vsi_ctx: pointer to a VSI context struct |
| * @cd: pointer to command details structure or NULL |
| * |
| * Add a VSI context to the hardware also add it into the VSI handle list. |
| * If this function gets called after reset for existing VSIs then update |
| * with the new HW VSI number in the corresponding VSI handle list entry. |
| */ |
| enum ice_status |
| ice_add_vsi(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi_ctx, |
| struct ice_sq_cd *cd) |
| { |
| struct ice_vsi_ctx *tmp_vsi_ctx; |
| enum ice_status status; |
| |
| if (vsi_handle >= ICE_MAX_VSI) |
| return ICE_ERR_PARAM; |
| status = ice_aq_add_vsi(hw, vsi_ctx, cd); |
| if (status) |
| return status; |
| tmp_vsi_ctx = ice_get_vsi_ctx(hw, vsi_handle); |
| if (!tmp_vsi_ctx) { |
| /* Create a new VSI context */ |
| tmp_vsi_ctx = devm_kzalloc(ice_hw_to_dev(hw), |
| sizeof(*tmp_vsi_ctx), GFP_KERNEL); |
| if (!tmp_vsi_ctx) { |
| ice_aq_free_vsi(hw, vsi_ctx, false, cd); |
| return ICE_ERR_NO_MEMORY; |
| } |
| *tmp_vsi_ctx = *vsi_ctx; |
| ice_save_vsi_ctx(hw, vsi_handle, tmp_vsi_ctx); |
| } else { |
| /* update with new HW VSI num */ |
| tmp_vsi_ctx->vsi_num = vsi_ctx->vsi_num; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_free_vsi- free VSI context from hardware and VSI handle list |
| * @hw: pointer to the HW struct |
| * @vsi_handle: unique VSI handle |
| * @vsi_ctx: pointer to a VSI context struct |
| * @keep_vsi_alloc: keep VSI allocation as part of this PF's resources |
| * @cd: pointer to command details structure or NULL |
| * |
| * Free VSI context info from hardware as well as from VSI handle list |
| */ |
| enum ice_status |
| ice_free_vsi(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi_ctx, |
| bool keep_vsi_alloc, struct ice_sq_cd *cd) |
| { |
| enum ice_status status; |
| |
| if (!ice_is_vsi_valid(hw, vsi_handle)) |
| return ICE_ERR_PARAM; |
| vsi_ctx->vsi_num = ice_get_hw_vsi_num(hw, vsi_handle); |
| status = ice_aq_free_vsi(hw, vsi_ctx, keep_vsi_alloc, cd); |
| if (!status) |
| ice_clear_vsi_ctx(hw, vsi_handle); |
| return status; |
| } |
| |
| /** |
| * ice_update_vsi |
| * @hw: pointer to the HW struct |
| * @vsi_handle: unique VSI handle |
| * @vsi_ctx: pointer to a VSI context struct |
| * @cd: pointer to command details structure or NULL |
| * |
| * Update VSI context in the hardware |
| */ |
| enum ice_status |
| ice_update_vsi(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi_ctx, |
| struct ice_sq_cd *cd) |
| { |
| if (!ice_is_vsi_valid(hw, vsi_handle)) |
| return ICE_ERR_PARAM; |
| vsi_ctx->vsi_num = ice_get_hw_vsi_num(hw, vsi_handle); |
| return ice_aq_update_vsi(hw, vsi_ctx, cd); |
| } |
| |
| /** |
| * ice_cfg_rdma_fltr - enable/disable RDMA filtering on VSI |
| * @hw: pointer to HW struct |
| * @vsi_handle: VSI SW index |
| * @enable: boolean for enable/disable |
| */ |
| int |
| ice_cfg_rdma_fltr(struct ice_hw *hw, u16 vsi_handle, bool enable) |
| { |
| struct ice_vsi_ctx *ctx; |
| |
| ctx = ice_get_vsi_ctx(hw, vsi_handle); |
| if (!ctx) |
| return -EIO; |
| |
| if (enable) |
| ctx->info.q_opt_flags |= ICE_AQ_VSI_Q_OPT_PE_FLTR_EN; |
| else |
| ctx->info.q_opt_flags &= ~ICE_AQ_VSI_Q_OPT_PE_FLTR_EN; |
| |
| return ice_status_to_errno(ice_update_vsi(hw, vsi_handle, ctx, NULL)); |
| } |
| |
| /** |
| * ice_aq_alloc_free_vsi_list |
| * @hw: pointer to the HW struct |
| * @vsi_list_id: VSI list ID returned or used for lookup |
| * @lkup_type: switch rule filter lookup type |
| * @opc: switch rules population command type - pass in the command opcode |
| * |
| * allocates or free a VSI list resource |
| */ |
| static enum ice_status |
| ice_aq_alloc_free_vsi_list(struct ice_hw *hw, u16 *vsi_list_id, |
| enum ice_sw_lkup_type lkup_type, |
| enum ice_adminq_opc opc) |
| { |
| struct ice_aqc_alloc_free_res_elem *sw_buf; |
| struct ice_aqc_res_elem *vsi_ele; |
| enum ice_status status; |
| u16 buf_len; |
| |
| buf_len = struct_size(sw_buf, elem, 1); |
| sw_buf = devm_kzalloc(ice_hw_to_dev(hw), buf_len, GFP_KERNEL); |
| if (!sw_buf) |
| return ICE_ERR_NO_MEMORY; |
| sw_buf->num_elems = cpu_to_le16(1); |
| |
| if (lkup_type == ICE_SW_LKUP_MAC || |
| lkup_type == ICE_SW_LKUP_MAC_VLAN || |
| lkup_type == ICE_SW_LKUP_ETHERTYPE || |
| lkup_type == ICE_SW_LKUP_ETHERTYPE_MAC || |
| lkup_type == ICE_SW_LKUP_PROMISC || |
| lkup_type == ICE_SW_LKUP_PROMISC_VLAN) { |
| sw_buf->res_type = cpu_to_le16(ICE_AQC_RES_TYPE_VSI_LIST_REP); |
| } else if (lkup_type == ICE_SW_LKUP_VLAN) { |
| sw_buf->res_type = |
| cpu_to_le16(ICE_AQC_RES_TYPE_VSI_LIST_PRUNE); |
| } else { |
| status = ICE_ERR_PARAM; |
| goto ice_aq_alloc_free_vsi_list_exit; |
| } |
| |
| if (opc == ice_aqc_opc_free_res) |
| sw_buf->elem[0].e.sw_resp = cpu_to_le16(*vsi_list_id); |
| |
| status = ice_aq_alloc_free_res(hw, 1, sw_buf, buf_len, opc, NULL); |
| if (status) |
| goto ice_aq_alloc_free_vsi_list_exit; |
| |
| if (opc == ice_aqc_opc_alloc_res) { |
| vsi_ele = &sw_buf->elem[0]; |
| *vsi_list_id = le16_to_cpu(vsi_ele->e.sw_resp); |
| } |
| |
| ice_aq_alloc_free_vsi_list_exit: |
| devm_kfree(ice_hw_to_dev(hw), sw_buf); |
| return status; |
| } |
| |
| /** |
| * ice_aq_sw_rules - add/update/remove switch rules |
| * @hw: pointer to the HW struct |
| * @rule_list: pointer to switch rule population list |
| * @rule_list_sz: total size of the rule list in bytes |
| * @num_rules: number of switch rules in the rule_list |
| * @opc: switch rules population command type - pass in the command opcode |
| * @cd: pointer to command details structure or NULL |
| * |
| * Add(0x02a0)/Update(0x02a1)/Remove(0x02a2) switch rules commands to firmware |
| */ |
| static enum ice_status |
| ice_aq_sw_rules(struct ice_hw *hw, void *rule_list, u16 rule_list_sz, |
| u8 num_rules, enum ice_adminq_opc opc, struct ice_sq_cd *cd) |
| { |
| struct ice_aq_desc desc; |
| enum ice_status status; |
| |
| if (opc != ice_aqc_opc_add_sw_rules && |
| opc != ice_aqc_opc_update_sw_rules && |
| opc != ice_aqc_opc_remove_sw_rules) |
| return ICE_ERR_PARAM; |
| |
| ice_fill_dflt_direct_cmd_desc(&desc, opc); |
| |
| desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD); |
| desc.params.sw_rules.num_rules_fltr_entry_index = |
| cpu_to_le16(num_rules); |
| status = ice_aq_send_cmd(hw, &desc, rule_list, rule_list_sz, cd); |
| if (opc != ice_aqc_opc_add_sw_rules && |
| hw->adminq.sq_last_status == ICE_AQ_RC_ENOENT) |
| status = ICE_ERR_DOES_NOT_EXIST; |
| |
| return status; |
| } |
| |
| /* ice_init_port_info - Initialize port_info with switch configuration data |
| * @pi: pointer to port_info |
| * @vsi_port_num: VSI number or port number |
| * @type: Type of switch element (port or VSI) |
| * @swid: switch ID of the switch the element is attached to |
| * @pf_vf_num: PF or VF number |
| * @is_vf: true if the element is a VF, false otherwise |
| */ |
| static void |
| ice_init_port_info(struct ice_port_info *pi, u16 vsi_port_num, u8 type, |
| u16 swid, u16 pf_vf_num, bool is_vf) |
| { |
| switch (type) { |
| case ICE_AQC_GET_SW_CONF_RESP_PHYS_PORT: |
| pi->lport = (u8)(vsi_port_num & ICE_LPORT_MASK); |
| pi->sw_id = swid; |
| pi->pf_vf_num = pf_vf_num; |
| pi->is_vf = is_vf; |
| pi->dflt_tx_vsi_num = ICE_DFLT_VSI_INVAL; |
| pi->dflt_rx_vsi_num = ICE_DFLT_VSI_INVAL; |
| break; |
| default: |
| ice_debug(pi->hw, ICE_DBG_SW, "incorrect VSI/port type received\n"); |
| break; |
| } |
| } |
| |
| /* ice_get_initial_sw_cfg - Get initial port and default VSI data |
| * @hw: pointer to the hardware structure |
| */ |
| enum ice_status ice_get_initial_sw_cfg(struct ice_hw *hw) |
| { |
| struct ice_aqc_get_sw_cfg_resp_elem *rbuf; |
| enum ice_status status; |
| u16 req_desc = 0; |
| u16 num_elems; |
| u16 i; |
| |
| rbuf = devm_kzalloc(ice_hw_to_dev(hw), ICE_SW_CFG_MAX_BUF_LEN, |
| GFP_KERNEL); |
| |
| if (!rbuf) |
| return ICE_ERR_NO_MEMORY; |
| |
| /* Multiple calls to ice_aq_get_sw_cfg may be required |
| * to get all the switch configuration information. The need |
| * for additional calls is indicated by ice_aq_get_sw_cfg |
| * writing a non-zero value in req_desc |
| */ |
| do { |
| struct ice_aqc_get_sw_cfg_resp_elem *ele; |
| |
| status = ice_aq_get_sw_cfg(hw, rbuf, ICE_SW_CFG_MAX_BUF_LEN, |
| &req_desc, &num_elems, NULL); |
| |
| if (status) |
| break; |
| |
| for (i = 0, ele = rbuf; i < num_elems; i++, ele++) { |
| u16 pf_vf_num, swid, vsi_port_num; |
| bool is_vf = false; |
| u8 res_type; |
| |
| vsi_port_num = le16_to_cpu(ele->vsi_port_num) & |
| ICE_AQC_GET_SW_CONF_RESP_VSI_PORT_NUM_M; |
| |
| pf_vf_num = le16_to_cpu(ele->pf_vf_num) & |
| ICE_AQC_GET_SW_CONF_RESP_FUNC_NUM_M; |
| |
| swid = le16_to_cpu(ele->swid); |
| |
| if (le16_to_cpu(ele->pf_vf_num) & |
| ICE_AQC_GET_SW_CONF_RESP_IS_VF) |
| is_vf = true; |
| |
| res_type = (u8)(le16_to_cpu(ele->vsi_port_num) >> |
| ICE_AQC_GET_SW_CONF_RESP_TYPE_S); |
| |
| if (res_type == ICE_AQC_GET_SW_CONF_RESP_VSI) { |
| /* FW VSI is not needed. Just continue. */ |
| continue; |
| } |
| |
| ice_init_port_info(hw->port_info, vsi_port_num, |
| res_type, swid, pf_vf_num, is_vf); |
| } |
| } while (req_desc && !status); |
| |
| devm_kfree(ice_hw_to_dev(hw), rbuf); |
| return status; |
| } |
| |
| /** |
| * ice_fill_sw_info - Helper function to populate lb_en and lan_en |
| * @hw: pointer to the hardware structure |
| * @fi: filter info structure to fill/update |
| * |
| * This helper function populates the lb_en and lan_en elements of the provided |
| * ice_fltr_info struct using the switch's type and characteristics of the |
| * switch rule being configured. |
| */ |
| static void ice_fill_sw_info(struct ice_hw *hw, struct ice_fltr_info *fi) |
| { |
| fi->lb_en = false; |
| fi->lan_en = false; |
| if ((fi->flag & ICE_FLTR_TX) && |
| (fi->fltr_act == ICE_FWD_TO_VSI || |
| fi->fltr_act == ICE_FWD_TO_VSI_LIST || |
| fi->fltr_act == ICE_FWD_TO_Q || |
| fi->fltr_act == ICE_FWD_TO_QGRP)) { |
| /* Setting LB for prune actions will result in replicated |
| * packets to the internal switch that will be dropped. |
| */ |
| if (fi->lkup_type != ICE_SW_LKUP_VLAN) |
| fi->lb_en = true; |
| |
| /* Set lan_en to TRUE if |
| * 1. The switch is a VEB AND |
| * 2 |
| * 2.1 The lookup is a directional lookup like ethertype, |
| * promiscuous, ethertype-MAC, promiscuous-VLAN |
| * and default-port OR |
| * 2.2 The lookup is VLAN, OR |
| * 2.3 The lookup is MAC with mcast or bcast addr for MAC, OR |
| * 2.4 The lookup is MAC_VLAN with mcast or bcast addr for MAC. |
| * |
| * OR |
| * |
| * The switch is a VEPA. |
| * |
| * In all other cases, the LAN enable has to be set to false. |
| */ |
| if (hw->evb_veb) { |
| if (fi->lkup_type == ICE_SW_LKUP_ETHERTYPE || |
| fi->lkup_type == ICE_SW_LKUP_PROMISC || |
| fi->lkup_type == ICE_SW_LKUP_ETHERTYPE_MAC || |
| fi->lkup_type == ICE_SW_LKUP_PROMISC_VLAN || |
| fi->lkup_type == ICE_SW_LKUP_DFLT || |
| fi->lkup_type == ICE_SW_LKUP_VLAN || |
| (fi->lkup_type == ICE_SW_LKUP_MAC && |
| !is_unicast_ether_addr(fi->l_data.mac.mac_addr)) || |
| (fi->lkup_type == ICE_SW_LKUP_MAC_VLAN && |
| !is_unicast_ether_addr(fi->l_data.mac.mac_addr))) |
| fi->lan_en = true; |
| } else { |
| fi->lan_en = true; |
| } |
| } |
| } |
| |
| /** |
| * ice_fill_sw_rule - Helper function to fill switch rule structure |
| * @hw: pointer to the hardware structure |
| * @f_info: entry containing packet forwarding information |
| * @s_rule: switch rule structure to be filled in based on mac_entry |
| * @opc: switch rules population command type - pass in the command opcode |
| */ |
| static void |
| ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info, |
| struct ice_aqc_sw_rules_elem *s_rule, enum ice_adminq_opc opc) |
| { |
| u16 vlan_id = ICE_MAX_VLAN_ID + 1; |
| void *daddr = NULL; |
| u16 eth_hdr_sz; |
| u8 *eth_hdr; |
| u32 act = 0; |
| __be16 *off; |
| u8 q_rgn; |
| |
| if (opc == ice_aqc_opc_remove_sw_rules) { |
| s_rule->pdata.lkup_tx_rx.act = 0; |
| s_rule->pdata.lkup_tx_rx.index = |
| cpu_to_le16(f_info->fltr_rule_id); |
| s_rule->pdata.lkup_tx_rx.hdr_len = 0; |
| return; |
| } |
| |
| eth_hdr_sz = sizeof(dummy_eth_header); |
| eth_hdr = s_rule->pdata.lkup_tx_rx.hdr; |
| |
| /* initialize the ether header with a dummy header */ |
| memcpy(eth_hdr, dummy_eth_header, eth_hdr_sz); |
| ice_fill_sw_info(hw, f_info); |
| |
| switch (f_info->fltr_act) { |
| case ICE_FWD_TO_VSI: |
| act |= (f_info->fwd_id.hw_vsi_id << ICE_SINGLE_ACT_VSI_ID_S) & |
| ICE_SINGLE_ACT_VSI_ID_M; |
| if (f_info->lkup_type != ICE_SW_LKUP_VLAN) |
| act |= ICE_SINGLE_ACT_VSI_FORWARDING | |
| ICE_SINGLE_ACT_VALID_BIT; |
| break; |
| case ICE_FWD_TO_VSI_LIST: |
| act |= ICE_SINGLE_ACT_VSI_LIST; |
| act |= (f_info->fwd_id.vsi_list_id << |
| ICE_SINGLE_ACT_VSI_LIST_ID_S) & |
| ICE_SINGLE_ACT_VSI_LIST_ID_M; |
| if (f_info->lkup_type != ICE_SW_LKUP_VLAN) |
| act |= ICE_SINGLE_ACT_VSI_FORWARDING | |
| ICE_SINGLE_ACT_VALID_BIT; |
| break; |
| case ICE_FWD_TO_Q: |
| act |= ICE_SINGLE_ACT_TO_Q; |
| act |= (f_info->fwd_id.q_id << ICE_SINGLE_ACT_Q_INDEX_S) & |
| ICE_SINGLE_ACT_Q_INDEX_M; |
| break; |
| case ICE_DROP_PACKET: |
| act |= ICE_SINGLE_ACT_VSI_FORWARDING | ICE_SINGLE_ACT_DROP | |
| ICE_SINGLE_ACT_VALID_BIT; |
| break; |
| case ICE_FWD_TO_QGRP: |
| q_rgn = f_info->qgrp_size > 0 ? |
| (u8)ilog2(f_info->qgrp_size) : 0; |
| act |= ICE_SINGLE_ACT_TO_Q; |
| act |= (f_info->fwd_id.q_id << ICE_SINGLE_ACT_Q_INDEX_S) & |
| ICE_SINGLE_ACT_Q_INDEX_M; |
| act |= (q_rgn << ICE_SINGLE_ACT_Q_REGION_S) & |
| ICE_SINGLE_ACT_Q_REGION_M; |
| break; |
| default: |
| return; |
| } |
| |
| if (f_info->lb_en) |
| act |= ICE_SINGLE_ACT_LB_ENABLE; |
| if (f_info->lan_en) |
| act |= ICE_SINGLE_ACT_LAN_ENABLE; |
| |
| switch (f_info->lkup_type) { |
| case ICE_SW_LKUP_MAC: |
| daddr = f_info->l_data.mac.mac_addr; |
| break; |
| case ICE_SW_LKUP_VLAN: |
| vlan_id = f_info->l_data.vlan.vlan_id; |
| if (f_info->fltr_act == ICE_FWD_TO_VSI || |
| f_info->fltr_act == ICE_FWD_TO_VSI_LIST) { |
| act |= ICE_SINGLE_ACT_PRUNE; |
| act |= ICE_SINGLE_ACT_EGRESS | ICE_SINGLE_ACT_INGRESS; |
| } |
| break; |
| case ICE_SW_LKUP_ETHERTYPE_MAC: |
| daddr = f_info->l_data.ethertype_mac.mac_addr; |
| fallthrough; |
| case ICE_SW_LKUP_ETHERTYPE: |
| off = (__force __be16 *)(eth_hdr + ICE_ETH_ETHTYPE_OFFSET); |
| *off = cpu_to_be16(f_info->l_data.ethertype_mac.ethertype); |
| break; |
| case ICE_SW_LKUP_MAC_VLAN: |
| daddr = f_info->l_data.mac_vlan.mac_addr; |
| vlan_id = f_info->l_data.mac_vlan.vlan_id; |
| break; |
| case ICE_SW_LKUP_PROMISC_VLAN: |
| vlan_id = f_info->l_data.mac_vlan.vlan_id; |
| fallthrough; |
| case ICE_SW_LKUP_PROMISC: |
| daddr = f_info->l_data.mac_vlan.mac_addr; |
| break; |
| default: |
| break; |
| } |
| |
| s_rule->type = (f_info->flag & ICE_FLTR_RX) ? |
| cpu_to_le16(ICE_AQC_SW_RULES_T_LKUP_RX) : |
| cpu_to_le16(ICE_AQC_SW_RULES_T_LKUP_TX); |
| |
| /* Recipe set depending on lookup type */ |
| s_rule->pdata.lkup_tx_rx.recipe_id = cpu_to_le16(f_info->lkup_type); |
| s_rule->pdata.lkup_tx_rx.src = cpu_to_le16(f_info->src); |
| s_rule->pdata.lkup_tx_rx.act = cpu_to_le32(act); |
| |
| if (daddr) |
| ether_addr_copy(eth_hdr + ICE_ETH_DA_OFFSET, daddr); |
| |
| if (!(vlan_id > ICE_MAX_VLAN_ID)) { |
| off = (__force __be16 *)(eth_hdr + ICE_ETH_VLAN_TCI_OFFSET); |
| *off = cpu_to_be16(vlan_id); |
| } |
| |
| /* Create the switch rule with the final dummy Ethernet header */ |
| if (opc != ice_aqc_opc_update_sw_rules) |
| s_rule->pdata.lkup_tx_rx.hdr_len = cpu_to_le16(eth_hdr_sz); |
| } |
| |
| /** |
| * ice_add_marker_act |
| * @hw: pointer to the hardware structure |
| * @m_ent: the management entry for which sw marker needs to be added |
| * @sw_marker: sw marker to tag the Rx descriptor with |
| * @l_id: large action resource ID |
| * |
| * Create a large action to hold software marker and update the switch rule |
| * entry pointed by m_ent with newly created large action |
| */ |
| static enum ice_status |
| ice_add_marker_act(struct ice_hw *hw, struct ice_fltr_mgmt_list_entry *m_ent, |
| u16 sw_marker, u16 l_id) |
| { |
| struct ice_aqc_sw_rules_elem *lg_act, *rx_tx; |
| /* For software marker we need 3 large actions |
| * 1. FWD action: FWD TO VSI or VSI LIST |
| * 2. GENERIC VALUE action to hold the profile ID |
| * 3. GENERIC VALUE action to hold the software marker ID |
| */ |
| const u16 num_lg_acts = 3; |
| enum ice_status status; |
| u16 lg_act_size; |
| u16 rules_size; |
| u32 act; |
| u16 id; |
| |
| if (m_ent->fltr_info.lkup_type != ICE_SW_LKUP_MAC) |
| return ICE_ERR_PARAM; |
| |
| /* Create two back-to-back switch rules and submit them to the HW using |
| * one memory buffer: |
| * 1. Large Action |
| * 2. Look up Tx Rx |
| */ |
| lg_act_size = (u16)ICE_SW_RULE_LG_ACT_SIZE(num_lg_acts); |
| rules_size = lg_act_size + ICE_SW_RULE_RX_TX_ETH_HDR_SIZE; |
| lg_act = devm_kzalloc(ice_hw_to_dev(hw), rules_size, GFP_KERNEL); |
| if (!lg_act) |
| return ICE_ERR_NO_MEMORY; |
| |
| rx_tx = (struct ice_aqc_sw_rules_elem *)((u8 *)lg_act + lg_act_size); |
| |
| /* Fill in the first switch rule i.e. large action */ |
| lg_act->type = cpu_to_le16(ICE_AQC_SW_RULES_T_LG_ACT); |
| lg_act->pdata.lg_act.index = cpu_to_le16(l_id); |
| lg_act->pdata.lg_act.size = cpu_to_le16(num_lg_acts); |
| |
| /* First action VSI forwarding or VSI list forwarding depending on how |
| * many VSIs |
| */ |
| id = (m_ent->vsi_count > 1) ? m_ent->fltr_info.fwd_id.vsi_list_id : |
| m_ent->fltr_info.fwd_id.hw_vsi_id; |
| |
| act = ICE_LG_ACT_VSI_FORWARDING | ICE_LG_ACT_VALID_BIT; |
| act |= (id << ICE_LG_ACT_VSI_LIST_ID_S) & ICE_LG_ACT_VSI_LIST_ID_M; |
| if (m_ent->vsi_count > 1) |
| act |= ICE_LG_ACT_VSI_LIST; |
| lg_act->pdata.lg_act.act[0] = cpu_to_le32(act); |
| |
| /* Second action descriptor type */ |
| act = ICE_LG_ACT_GENERIC; |
| |
| act |= (1 << ICE_LG_ACT_GENERIC_VALUE_S) & ICE_LG_ACT_GENERIC_VALUE_M; |
| lg_act->pdata.lg_act.act[1] = cpu_to_le32(act); |
| |
| act = (ICE_LG_ACT_GENERIC_OFF_RX_DESC_PROF_IDX << |
| ICE_LG_ACT_GENERIC_OFFSET_S) & ICE_LG_ACT_GENERIC_OFFSET_M; |
| |
| /* Third action Marker value */ |
| act |= ICE_LG_ACT_GENERIC; |
| act |= (sw_marker << ICE_LG_ACT_GENERIC_VALUE_S) & |
| ICE_LG_ACT_GENERIC_VALUE_M; |
| |
| lg_act->pdata.lg_act.act[2] = cpu_to_le32(act); |
| |
| /* call the fill switch rule to fill the lookup Tx Rx structure */ |
| ice_fill_sw_rule(hw, &m_ent->fltr_info, rx_tx, |
| ice_aqc_opc_update_sw_rules); |
| |
| /* Update the action to point to the large action ID */ |
| rx_tx->pdata.lkup_tx_rx.act = |
| cpu_to_le32(ICE_SINGLE_ACT_PTR | |
| ((l_id << ICE_SINGLE_ACT_PTR_VAL_S) & |
| ICE_SINGLE_ACT_PTR_VAL_M)); |
| |
| /* Use the filter rule ID of the previously created rule with single |
| * act. Once the update happens, hardware will treat this as large |
| * action |
| */ |
| rx_tx->pdata.lkup_tx_rx.index = |
| cpu_to_le16(m_ent->fltr_info.fltr_rule_id); |
| |
| status = ice_aq_sw_rules(hw, lg_act, rules_size, 2, |
| ice_aqc_opc_update_sw_rules, NULL); |
| if (!status) { |
| m_ent->lg_act_idx = l_id; |
| m_ent->sw_marker_id = sw_marker; |
| } |
| |
| devm_kfree(ice_hw_to_dev(hw), lg_act); |
| return status; |
| } |
| |
| /** |
| * ice_create_vsi_list_map |
| * @hw: pointer to the hardware structure |
| * @vsi_handle_arr: array of VSI handles to set in the VSI mapping |
| * @num_vsi: number of VSI handles in the array |
| * @vsi_list_id: VSI list ID generated as part of allocate resource |
| * |
| * Helper function to create a new entry of VSI list ID to VSI mapping |
| * using the given VSI list ID |
| */ |
| static struct ice_vsi_list_map_info * |
| ice_create_vsi_list_map(struct ice_hw *hw, u16 *vsi_handle_arr, u16 num_vsi, |
| u16 vsi_list_id) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_vsi_list_map_info *v_map; |
| int i; |
| |
| v_map = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*v_map), GFP_KERNEL); |
| if (!v_map) |
| return NULL; |
| |
| v_map->vsi_list_id = vsi_list_id; |
| v_map->ref_cnt = 1; |
| for (i = 0; i < num_vsi; i++) |
| set_bit(vsi_handle_arr[i], v_map->vsi_map); |
| |
| list_add(&v_map->list_entry, &sw->vsi_list_map_head); |
| return v_map; |
| } |
| |
| /** |
| * ice_update_vsi_list_rule |
| * @hw: pointer to the hardware structure |
| * @vsi_handle_arr: array of VSI handles to form a VSI list |
| * @num_vsi: number of VSI handles in the array |
| * @vsi_list_id: VSI list ID generated as part of allocate resource |
| * @remove: Boolean value to indicate if this is a remove action |
| * @opc: switch rules population command type - pass in the command opcode |
| * @lkup_type: lookup type of the filter |
| * |
| * Call AQ command to add a new switch rule or update existing switch rule |
| * using the given VSI list ID |
| */ |
| static enum ice_status |
| ice_update_vsi_list_rule(struct ice_hw *hw, u16 *vsi_handle_arr, u16 num_vsi, |
| u16 vsi_list_id, bool remove, enum ice_adminq_opc opc, |
| enum ice_sw_lkup_type lkup_type) |
| { |
| struct ice_aqc_sw_rules_elem *s_rule; |
| enum ice_status status; |
| u16 s_rule_size; |
| u16 rule_type; |
| int i; |
| |
| if (!num_vsi) |
| return ICE_ERR_PARAM; |
| |
| if (lkup_type == ICE_SW_LKUP_MAC || |
| lkup_type == ICE_SW_LKUP_MAC_VLAN || |
| lkup_type == ICE_SW_LKUP_ETHERTYPE || |
| lkup_type == ICE_SW_LKUP_ETHERTYPE_MAC || |
| lkup_type == ICE_SW_LKUP_PROMISC || |
| lkup_type == ICE_SW_LKUP_PROMISC_VLAN) |
| rule_type = remove ? ICE_AQC_SW_RULES_T_VSI_LIST_CLEAR : |
| ICE_AQC_SW_RULES_T_VSI_LIST_SET; |
| else if (lkup_type == ICE_SW_LKUP_VLAN) |
| rule_type = remove ? ICE_AQC_SW_RULES_T_PRUNE_LIST_CLEAR : |
| ICE_AQC_SW_RULES_T_PRUNE_LIST_SET; |
| else |
| return ICE_ERR_PARAM; |
| |
| s_rule_size = (u16)ICE_SW_RULE_VSI_LIST_SIZE(num_vsi); |
| s_rule = devm_kzalloc(ice_hw_to_dev(hw), s_rule_size, GFP_KERNEL); |
| if (!s_rule) |
| return ICE_ERR_NO_MEMORY; |
| for (i = 0; i < num_vsi; i++) { |
| if (!ice_is_vsi_valid(hw, vsi_handle_arr[i])) { |
| status = ICE_ERR_PARAM; |
| goto exit; |
| } |
| /* AQ call requires hw_vsi_id(s) */ |
| s_rule->pdata.vsi_list.vsi[i] = |
| cpu_to_le16(ice_get_hw_vsi_num(hw, vsi_handle_arr[i])); |
| } |
| |
| s_rule->type = cpu_to_le16(rule_type); |
| s_rule->pdata.vsi_list.number_vsi = cpu_to_le16(num_vsi); |
| s_rule->pdata.vsi_list.index = cpu_to_le16(vsi_list_id); |
| |
| status = ice_aq_sw_rules(hw, s_rule, s_rule_size, 1, opc, NULL); |
| |
| exit: |
| devm_kfree(ice_hw_to_dev(hw), s_rule); |
| return status; |
| } |
| |
| /** |
| * ice_create_vsi_list_rule - Creates and populates a VSI list rule |
| * @hw: pointer to the HW struct |
| * @vsi_handle_arr: array of VSI handles to form a VSI list |
| * @num_vsi: number of VSI handles in the array |
| * @vsi_list_id: stores the ID of the VSI list to be created |
| * @lkup_type: switch rule filter's lookup type |
| */ |
| static enum ice_status |
| ice_create_vsi_list_rule(struct ice_hw *hw, u16 *vsi_handle_arr, u16 num_vsi, |
| u16 *vsi_list_id, enum ice_sw_lkup_type lkup_type) |
| { |
| enum ice_status status; |
| |
| status = ice_aq_alloc_free_vsi_list(hw, vsi_list_id, lkup_type, |
| ice_aqc_opc_alloc_res); |
| if (status) |
| return status; |
| |
| /* Update the newly created VSI list to include the specified VSIs */ |
| return ice_update_vsi_list_rule(hw, vsi_handle_arr, num_vsi, |
| *vsi_list_id, false, |
| ice_aqc_opc_add_sw_rules, lkup_type); |
| } |
| |
| /** |
| * ice_create_pkt_fwd_rule |
| * @hw: pointer to the hardware structure |
| * @f_entry: entry containing packet forwarding information |
| * |
| * Create switch rule with given filter information and add an entry |
| * to the corresponding filter management list to track this switch rule |
| * and VSI mapping |
| */ |
| static enum ice_status |
| ice_create_pkt_fwd_rule(struct ice_hw *hw, |
| struct ice_fltr_list_entry *f_entry) |
| { |
| struct ice_fltr_mgmt_list_entry *fm_entry; |
| struct ice_aqc_sw_rules_elem *s_rule; |
| enum ice_sw_lkup_type l_type; |
| struct ice_sw_recipe *recp; |
| enum ice_status status; |
| |
| s_rule = devm_kzalloc(ice_hw_to_dev(hw), |
| ICE_SW_RULE_RX_TX_ETH_HDR_SIZE, GFP_KERNEL); |
| if (!s_rule) |
| return ICE_ERR_NO_MEMORY; |
| fm_entry = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*fm_entry), |
| GFP_KERNEL); |
| if (!fm_entry) { |
| status = ICE_ERR_NO_MEMORY; |
| goto ice_create_pkt_fwd_rule_exit; |
| } |
| |
| fm_entry->fltr_info = f_entry->fltr_info; |
| |
| /* Initialize all the fields for the management entry */ |
| fm_entry->vsi_count = 1; |
| fm_entry->lg_act_idx = ICE_INVAL_LG_ACT_INDEX; |
| fm_entry->sw_marker_id = ICE_INVAL_SW_MARKER_ID; |
| fm_entry->counter_index = ICE_INVAL_COUNTER_ID; |
| |
| ice_fill_sw_rule(hw, &fm_entry->fltr_info, s_rule, |
| ice_aqc_opc_add_sw_rules); |
| |
| status = ice_aq_sw_rules(hw, s_rule, ICE_SW_RULE_RX_TX_ETH_HDR_SIZE, 1, |
| ice_aqc_opc_add_sw_rules, NULL); |
| if (status) { |
| devm_kfree(ice_hw_to_dev(hw), fm_entry); |
| goto ice_create_pkt_fwd_rule_exit; |
| } |
| |
| f_entry->fltr_info.fltr_rule_id = |
| le16_to_cpu(s_rule->pdata.lkup_tx_rx.index); |
| fm_entry->fltr_info.fltr_rule_id = |
| le16_to_cpu(s_rule->pdata.lkup_tx_rx.index); |
| |
| /* The book keeping entries will get removed when base driver |
| * calls remove filter AQ command |
| */ |
| l_type = fm_entry->fltr_info.lkup_type; |
| recp = &hw->switch_info->recp_list[l_type]; |
| list_add(&fm_entry->list_entry, &recp->filt_rules); |
| |
| ice_create_pkt_fwd_rule_exit: |
| devm_kfree(ice_hw_to_dev(hw), s_rule); |
| return status; |
| } |
| |
| /** |
| * ice_update_pkt_fwd_rule |
| * @hw: pointer to the hardware structure |
| * @f_info: filter information for switch rule |
| * |
| * Call AQ command to update a previously created switch rule with a |
| * VSI list ID |
| */ |
| static enum ice_status |
| ice_update_pkt_fwd_rule(struct ice_hw *hw, struct ice_fltr_info *f_info) |
| { |
| struct ice_aqc_sw_rules_elem *s_rule; |
| enum ice_status status; |
| |
| s_rule = devm_kzalloc(ice_hw_to_dev(hw), |
| ICE_SW_RULE_RX_TX_ETH_HDR_SIZE, GFP_KERNEL); |
| if (!s_rule) |
| return ICE_ERR_NO_MEMORY; |
| |
| ice_fill_sw_rule(hw, f_info, s_rule, ice_aqc_opc_update_sw_rules); |
| |
| s_rule->pdata.lkup_tx_rx.index = cpu_to_le16(f_info->fltr_rule_id); |
| |
| /* Update switch rule with new rule set to forward VSI list */ |
| status = ice_aq_sw_rules(hw, s_rule, ICE_SW_RULE_RX_TX_ETH_HDR_SIZE, 1, |
| ice_aqc_opc_update_sw_rules, NULL); |
| |
| devm_kfree(ice_hw_to_dev(hw), s_rule); |
| return status; |
| } |
| |
| /** |
| * ice_update_sw_rule_bridge_mode |
| * @hw: pointer to the HW struct |
| * |
| * Updates unicast switch filter rules based on VEB/VEPA mode |
| */ |
| enum ice_status ice_update_sw_rule_bridge_mode(struct ice_hw *hw) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_fltr_mgmt_list_entry *fm_entry; |
| enum ice_status status = 0; |
| struct list_head *rule_head; |
| struct mutex *rule_lock; /* Lock to protect filter rule list */ |
| |
| rule_lock = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock; |
| rule_head = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rules; |
| |
| mutex_lock(rule_lock); |
| list_for_each_entry(fm_entry, rule_head, list_entry) { |
| struct ice_fltr_info *fi = &fm_entry->fltr_info; |
| u8 *addr = fi->l_data.mac.mac_addr; |
| |
| /* Update unicast Tx rules to reflect the selected |
| * VEB/VEPA mode |
| */ |
| if ((fi->flag & ICE_FLTR_TX) && is_unicast_ether_addr(addr) && |
| (fi->fltr_act == ICE_FWD_TO_VSI || |
| fi->fltr_act == ICE_FWD_TO_VSI_LIST || |
| fi->fltr_act == ICE_FWD_TO_Q || |
| fi->fltr_act == ICE_FWD_TO_QGRP)) { |
| status = ice_update_pkt_fwd_rule(hw, fi); |
| if (status) |
| break; |
| } |
| } |
| |
| mutex_unlock(rule_lock); |
| |
| return status; |
| } |
| |
| /** |
| * ice_add_update_vsi_list |
| * @hw: pointer to the hardware structure |
| * @m_entry: pointer to current filter management list entry |
| * @cur_fltr: filter information from the book keeping entry |
| * @new_fltr: filter information with the new VSI to be added |
| * |
| * Call AQ command to add or update previously created VSI list with new VSI. |
| * |
| * Helper function to do book keeping associated with adding filter information |
| * The algorithm to do the book keeping is described below : |
| * When a VSI needs to subscribe to a given filter (MAC/VLAN/Ethtype etc.) |
| * if only one VSI has been added till now |
| * Allocate a new VSI list and add two VSIs |
| * to this list using switch rule command |
| * Update the previously created switch rule with the |
| * newly created VSI list ID |
| * if a VSI list was previously created |
| * Add the new VSI to the previously created VSI list set |
| * using the update switch rule command |
| */ |
| static enum ice_status |
| ice_add_update_vsi_list(struct ice_hw *hw, |
| struct ice_fltr_mgmt_list_entry *m_entry, |
| struct ice_fltr_info *cur_fltr, |
| struct ice_fltr_info *new_fltr) |
| { |
| enum ice_status status = 0; |
| u16 vsi_list_id = 0; |
| |
| if ((cur_fltr->fltr_act == ICE_FWD_TO_Q || |
| cur_fltr->fltr_act == ICE_FWD_TO_QGRP)) |
| return ICE_ERR_NOT_IMPL; |
| |
| if ((new_fltr->fltr_act == ICE_FWD_TO_Q || |
| new_fltr->fltr_act == ICE_FWD_TO_QGRP) && |
| (cur_fltr->fltr_act == ICE_FWD_TO_VSI || |
| cur_fltr->fltr_act == ICE_FWD_TO_VSI_LIST)) |
| return ICE_ERR_NOT_IMPL; |
| |
| if (m_entry->vsi_count < 2 && !m_entry->vsi_list_info) { |
| /* Only one entry existed in the mapping and it was not already |
| * a part of a VSI list. So, create a VSI list with the old and |
| * new VSIs. |
| */ |
| struct ice_fltr_info tmp_fltr; |
| u16 vsi_handle_arr[2]; |
| |
| /* A rule already exists with the new VSI being added */ |
| if (cur_fltr->fwd_id.hw_vsi_id == new_fltr->fwd_id.hw_vsi_id) |
| return ICE_ERR_ALREADY_EXISTS; |
| |
| vsi_handle_arr[0] = cur_fltr->vsi_handle; |
| vsi_handle_arr[1] = new_fltr->vsi_handle; |
| status = ice_create_vsi_list_rule(hw, &vsi_handle_arr[0], 2, |
| &vsi_list_id, |
| new_fltr->lkup_type); |
| if (status) |
| return status; |
| |
| tmp_fltr = *new_fltr; |
| tmp_fltr.fltr_rule_id = cur_fltr->fltr_rule_id; |
| tmp_fltr.fltr_act = ICE_FWD_TO_VSI_LIST; |
| tmp_fltr.fwd_id.vsi_list_id = vsi_list_id; |
| /* Update the previous switch rule of "MAC forward to VSI" to |
| * "MAC fwd to VSI list" |
| */ |
| status = ice_update_pkt_fwd_rule(hw, &tmp_fltr); |
| if (status) |
| return status; |
| |
| cur_fltr->fwd_id.vsi_list_id = vsi_list_id; |
| cur_fltr->fltr_act = ICE_FWD_TO_VSI_LIST; |
| m_entry->vsi_list_info = |
| ice_create_vsi_list_map(hw, &vsi_handle_arr[0], 2, |
| vsi_list_id); |
| |
| if (!m_entry->vsi_list_info) |
| return ICE_ERR_NO_MEMORY; |
| |
| /* If this entry was large action then the large action needs |
| * to be updated to point to FWD to VSI list |
| */ |
| if (m_entry->sw_marker_id != ICE_INVAL_SW_MARKER_ID) |
| status = |
| ice_add_marker_act(hw, m_entry, |
| m_entry->sw_marker_id, |
| m_entry->lg_act_idx); |
| } else { |
| u16 vsi_handle = new_fltr->vsi_handle; |
| enum ice_adminq_opc opcode; |
| |
| if (!m_entry->vsi_list_info) |
| return ICE_ERR_CFG; |
| |
| /* A rule already exists with the new VSI being added */ |
| if (test_bit(vsi_handle, m_entry->vsi_list_info->vsi_map)) |
| return 0; |
| |
| /* Update the previously created VSI list set with |
| * the new VSI ID passed in |
| */ |
| vsi_list_id = cur_fltr->fwd_id.vsi_list_id; |
| opcode = ice_aqc_opc_update_sw_rules; |
| |
| status = ice_update_vsi_list_rule(hw, &vsi_handle, 1, |
| vsi_list_id, false, opcode, |
| new_fltr->lkup_type); |
| /* update VSI list mapping info with new VSI ID */ |
| if (!status) |
| set_bit(vsi_handle, m_entry->vsi_list_info->vsi_map); |
| } |
| if (!status) |
| m_entry->vsi_count++; |
| return status; |
| } |
| |
| /** |
| * ice_find_rule_entry - Search a rule entry |
| * @hw: pointer to the hardware structure |
| * @recp_id: lookup type for which the specified rule needs to be searched |
| * @f_info: rule information |
| * |
| * Helper function to search for a given rule entry |
| * Returns pointer to entry storing the rule if found |
| */ |
| static struct ice_fltr_mgmt_list_entry * |
| ice_find_rule_entry(struct ice_hw *hw, u8 recp_id, struct ice_fltr_info *f_info) |
| { |
| struct ice_fltr_mgmt_list_entry *list_itr, *ret = NULL; |
| struct ice_switch_info *sw = hw->switch_info; |
| struct list_head *list_head; |
| |
| list_head = &sw->recp_list[recp_id].filt_rules; |
| list_for_each_entry(list_itr, list_head, list_entry) { |
| if (!memcmp(&f_info->l_data, &list_itr->fltr_info.l_data, |
| sizeof(f_info->l_data)) && |
| f_info->flag == list_itr->fltr_info.flag) { |
| ret = list_itr; |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| /** |
| * ice_find_vsi_list_entry - Search VSI list map with VSI count 1 |
| * @hw: pointer to the hardware structure |
| * @recp_id: lookup type for which VSI lists needs to be searched |
| * @vsi_handle: VSI handle to be found in VSI list |
| * @vsi_list_id: VSI list ID found containing vsi_handle |
| * |
| * Helper function to search a VSI list with single entry containing given VSI |
| * handle element. This can be extended further to search VSI list with more |
| * than 1 vsi_count. Returns pointer to VSI list entry if found. |
| */ |
| static struct ice_vsi_list_map_info * |
| ice_find_vsi_list_entry(struct ice_hw *hw, u8 recp_id, u16 vsi_handle, |
| u16 *vsi_list_id) |
| { |
| struct ice_vsi_list_map_info *map_info = NULL; |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_fltr_mgmt_list_entry *list_itr; |
| struct list_head *list_head; |
| |
| list_head = &sw->recp_list[recp_id].filt_rules; |
| list_for_each_entry(list_itr, list_head, list_entry) { |
| if (list_itr->vsi_count == 1 && list_itr->vsi_list_info) { |
| map_info = list_itr->vsi_list_info; |
| if (test_bit(vsi_handle, map_info->vsi_map)) { |
| *vsi_list_id = map_info->vsi_list_id; |
| return map_info; |
| } |
| } |
| } |
| return NULL; |
| } |
| |
| /** |
| * ice_add_rule_internal - add rule for a given lookup type |
| * @hw: pointer to the hardware structure |
| * @recp_id: lookup type (recipe ID) for which rule has to be added |
| * @f_entry: structure containing MAC forwarding information |
| * |
| * Adds or updates the rule lists for a given recipe |
| */ |
| static enum ice_status |
| ice_add_rule_internal(struct ice_hw *hw, u8 recp_id, |
| struct ice_fltr_list_entry *f_entry) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_fltr_info *new_fltr, *cur_fltr; |
| struct ice_fltr_mgmt_list_entry *m_entry; |
| struct mutex *rule_lock; /* Lock to protect filter rule list */ |
| enum ice_status status = 0; |
| |
| if (!ice_is_vsi_valid(hw, f_entry->fltr_info.vsi_handle)) |
| return ICE_ERR_PARAM; |
| f_entry->fltr_info.fwd_id.hw_vsi_id = |
| ice_get_hw_vsi_num(hw, f_entry->fltr_info.vsi_handle); |
| |
| rule_lock = &sw->recp_list[recp_id].filt_rule_lock; |
| |
| mutex_lock(rule_lock); |
| new_fltr = &f_entry->fltr_info; |
| if (new_fltr->flag & ICE_FLTR_RX) |
| new_fltr->src = hw->port_info->lport; |
| else if (new_fltr->flag & ICE_FLTR_TX) |
| new_fltr->src = f_entry->fltr_info.fwd_id.hw_vsi_id; |
| |
| m_entry = ice_find_rule_entry(hw, recp_id, new_fltr); |
| if (!m_entry) { |
| mutex_unlock(rule_lock); |
| return ice_create_pkt_fwd_rule(hw, f_entry); |
| } |
| |
| cur_fltr = &m_entry->fltr_info; |
| status = ice_add_update_vsi_list(hw, m_entry, cur_fltr, new_fltr); |
| mutex_unlock(rule_lock); |
| |
| return status; |
| } |
| |
| /** |
| * ice_remove_vsi_list_rule |
| * @hw: pointer to the hardware structure |
| * @vsi_list_id: VSI list ID generated as part of allocate resource |
| * @lkup_type: switch rule filter lookup type |
| * |
| * The VSI list should be emptied before this function is called to remove the |
| * VSI list. |
| */ |
| static enum ice_status |
| ice_remove_vsi_list_rule(struct ice_hw *hw, u16 vsi_list_id, |
| enum ice_sw_lkup_type lkup_type) |
| { |
| struct ice_aqc_sw_rules_elem *s_rule; |
| enum ice_status status; |
| u16 s_rule_size; |
| |
| s_rule_size = (u16)ICE_SW_RULE_VSI_LIST_SIZE(0); |
| s_rule = devm_kzalloc(ice_hw_to_dev(hw), s_rule_size, GFP_KERNEL); |
| if (!s_rule) |
| return ICE_ERR_NO_MEMORY; |
| |
| s_rule->type = cpu_to_le16(ICE_AQC_SW_RULES_T_VSI_LIST_CLEAR); |
| s_rule->pdata.vsi_list.index = cpu_to_le16(vsi_list_id); |
| |
| /* Free the vsi_list resource that we allocated. It is assumed that the |
| * list is empty at this point. |
| */ |
| status = ice_aq_alloc_free_vsi_list(hw, &vsi_list_id, lkup_type, |
| ice_aqc_opc_free_res); |
| |
| devm_kfree(ice_hw_to_dev(hw), s_rule); |
| return status; |
| } |
| |
| /** |
| * ice_rem_update_vsi_list |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: VSI handle of the VSI to remove |
| * @fm_list: filter management entry for which the VSI list management needs to |
| * be done |
| */ |
| static enum ice_status |
| ice_rem_update_vsi_list(struct ice_hw *hw, u16 vsi_handle, |
| struct ice_fltr_mgmt_list_entry *fm_list) |
| { |
| enum ice_sw_lkup_type lkup_type; |
| enum ice_status status = 0; |
| u16 vsi_list_id; |
| |
| if (fm_list->fltr_info.fltr_act != ICE_FWD_TO_VSI_LIST || |
| fm_list->vsi_count == 0) |
| return ICE_ERR_PARAM; |
| |
| /* A rule with the VSI being removed does not exist */ |
| if (!test_bit(vsi_handle, fm_list->vsi_list_info->vsi_map)) |
| return ICE_ERR_DOES_NOT_EXIST; |
| |
| lkup_type = fm_list->fltr_info.lkup_type; |
| vsi_list_id = fm_list->fltr_info.fwd_id.vsi_list_id; |
| status = ice_update_vsi_list_rule(hw, &vsi_handle, 1, vsi_list_id, true, |
| ice_aqc_opc_update_sw_rules, |
| lkup_type); |
| if (status) |
| return status; |
| |
| fm_list->vsi_count--; |
| clear_bit(vsi_handle, fm_list->vsi_list_info->vsi_map); |
| |
| if (fm_list->vsi_count == 1 && lkup_type != ICE_SW_LKUP_VLAN) { |
| struct ice_fltr_info tmp_fltr_info = fm_list->fltr_info; |
| struct ice_vsi_list_map_info *vsi_list_info = |
| fm_list->vsi_list_info; |
| u16 rem_vsi_handle; |
| |
| rem_vsi_handle = find_first_bit(vsi_list_info->vsi_map, |
| ICE_MAX_VSI); |
| if (!ice_is_vsi_valid(hw, rem_vsi_handle)) |
| return ICE_ERR_OUT_OF_RANGE; |
| |
| /* Make sure VSI list is empty before removing it below */ |
| status = ice_update_vsi_list_rule(hw, &rem_vsi_handle, 1, |
| vsi_list_id, true, |
| ice_aqc_opc_update_sw_rules, |
| lkup_type); |
| if (status) |
| return status; |
| |
| tmp_fltr_info.fltr_act = ICE_FWD_TO_VSI; |
| tmp_fltr_info.fwd_id.hw_vsi_id = |
| ice_get_hw_vsi_num(hw, rem_vsi_handle); |
| tmp_fltr_info.vsi_handle = rem_vsi_handle; |
| status = ice_update_pkt_fwd_rule(hw, &tmp_fltr_info); |
| if (status) { |
| ice_debug(hw, ICE_DBG_SW, "Failed to update pkt fwd rule to FWD_TO_VSI on HW VSI %d, error %d\n", |
| tmp_fltr_info.fwd_id.hw_vsi_id, status); |
| return status; |
| } |
| |
| fm_list->fltr_info = tmp_fltr_info; |
| } |
| |
| if ((fm_list->vsi_count == 1 && lkup_type != ICE_SW_LKUP_VLAN) || |
| (fm_list->vsi_count == 0 && lkup_type == ICE_SW_LKUP_VLAN)) { |
| struct ice_vsi_list_map_info *vsi_list_info = |
| fm_list->vsi_list_info; |
| |
| /* Remove the VSI list since it is no longer used */ |
| status = ice_remove_vsi_list_rule(hw, vsi_list_id, lkup_type); |
| if (status) { |
| ice_debug(hw, ICE_DBG_SW, "Failed to remove VSI list %d, error %d\n", |
| vsi_list_id, status); |
| return status; |
| } |
| |
| list_del(&vsi_list_info->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), vsi_list_info); |
| fm_list->vsi_list_info = NULL; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * ice_remove_rule_internal - Remove a filter rule of a given type |
| * @hw: pointer to the hardware structure |
| * @recp_id: recipe ID for which the rule needs to removed |
| * @f_entry: rule entry containing filter information |
| */ |
| static enum ice_status |
| ice_remove_rule_internal(struct ice_hw *hw, u8 recp_id, |
| struct ice_fltr_list_entry *f_entry) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_fltr_mgmt_list_entry *list_elem; |
| struct mutex *rule_lock; /* Lock to protect filter rule list */ |
| enum ice_status status = 0; |
| bool remove_rule = false; |
| u16 vsi_handle; |
| |
| if (!ice_is_vsi_valid(hw, f_entry->fltr_info.vsi_handle)) |
| return ICE_ERR_PARAM; |
| f_entry->fltr_info.fwd_id.hw_vsi_id = |
| ice_get_hw_vsi_num(hw, f_entry->fltr_info.vsi_handle); |
| |
| rule_lock = &sw->recp_list[recp_id].filt_rule_lock; |
| mutex_lock(rule_lock); |
| list_elem = ice_find_rule_entry(hw, recp_id, &f_entry->fltr_info); |
| if (!list_elem) { |
| status = ICE_ERR_DOES_NOT_EXIST; |
| goto exit; |
| } |
| |
| if (list_elem->fltr_info.fltr_act != ICE_FWD_TO_VSI_LIST) { |
| remove_rule = true; |
| } else if (!list_elem->vsi_list_info) { |
| status = ICE_ERR_DOES_NOT_EXIST; |
| goto exit; |
| } else if (list_elem->vsi_list_info->ref_cnt > 1) { |
| /* a ref_cnt > 1 indicates that the vsi_list is being |
| * shared by multiple rules. Decrement the ref_cnt and |
| * remove this rule, but do not modify the list, as it |
| * is in-use by other rules. |
| */ |
| list_elem->vsi_list_info->ref_cnt--; |
| remove_rule = true; |
| } else { |
| /* a ref_cnt of 1 indicates the vsi_list is only used |
| * by one rule. However, the original removal request is only |
| * for a single VSI. Update the vsi_list first, and only |
| * remove the rule if there are no further VSIs in this list. |
| */ |
| vsi_handle = f_entry->fltr_info.vsi_handle; |
| status = ice_rem_update_vsi_list(hw, vsi_handle, list_elem); |
| if (status) |
| goto exit; |
| /* if VSI count goes to zero after updating the VSI list */ |
| if (list_elem->vsi_count == 0) |
| remove_rule = true; |
| } |
| |
| if (remove_rule) { |
| /* Remove the lookup rule */ |
| struct ice_aqc_sw_rules_elem *s_rule; |
| |
| s_rule = devm_kzalloc(ice_hw_to_dev(hw), |
| ICE_SW_RULE_RX_TX_NO_HDR_SIZE, |
| GFP_KERNEL); |
| if (!s_rule) { |
| status = ICE_ERR_NO_MEMORY; |
| goto exit; |
| } |
| |
| ice_fill_sw_rule(hw, &list_elem->fltr_info, s_rule, |
| ice_aqc_opc_remove_sw_rules); |
| |
| status = ice_aq_sw_rules(hw, s_rule, |
| ICE_SW_RULE_RX_TX_NO_HDR_SIZE, 1, |
| ice_aqc_opc_remove_sw_rules, NULL); |
| |
| /* Remove a book keeping from the list */ |
| devm_kfree(ice_hw_to_dev(hw), s_rule); |
| |
| if (status) |
| goto exit; |
| |
| list_del(&list_elem->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), list_elem); |
| } |
| exit: |
| mutex_unlock(rule_lock); |
| return status; |
| } |
| |
| /** |
| * ice_add_mac - Add a MAC address based filter rule |
| * @hw: pointer to the hardware structure |
| * @m_list: list of MAC addresses and forwarding information |
| * |
| * IMPORTANT: When the ucast_shared flag is set to false and m_list has |
| * multiple unicast addresses, the function assumes that all the |
| * addresses are unique in a given add_mac call. It doesn't |
| * check for duplicates in this case, removing duplicates from a given |
| * list should be taken care of in the caller of this function. |
| */ |
| enum ice_status ice_add_mac(struct ice_hw *hw, struct list_head *m_list) |
| { |
| struct ice_aqc_sw_rules_elem *s_rule, *r_iter; |
| struct ice_fltr_list_entry *m_list_itr; |
| struct list_head *rule_head; |
| u16 total_elem_left, s_rule_size; |
| struct ice_switch_info *sw; |
| struct mutex *rule_lock; /* Lock to protect filter rule list */ |
| enum ice_status status = 0; |
| u16 num_unicast = 0; |
| u8 elem_sent; |
| |
| if (!m_list || !hw) |
| return ICE_ERR_PARAM; |
| |
| s_rule = NULL; |
| sw = hw->switch_info; |
| rule_lock = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock; |
| list_for_each_entry(m_list_itr, m_list, list_entry) { |
| u8 *add = &m_list_itr->fltr_info.l_data.mac.mac_addr[0]; |
| u16 vsi_handle; |
| u16 hw_vsi_id; |
| |
| m_list_itr->fltr_info.flag = ICE_FLTR_TX; |
| vsi_handle = m_list_itr->fltr_info.vsi_handle; |
| if (!ice_is_vsi_valid(hw, vsi_handle)) |
| return ICE_ERR_PARAM; |
| hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle); |
| m_list_itr->fltr_info.fwd_id.hw_vsi_id = hw_vsi_id; |
| /* update the src in case it is VSI num */ |
| if (m_list_itr->fltr_info.src_id != ICE_SRC_ID_VSI) |
| return ICE_ERR_PARAM; |
| m_list_itr->fltr_info.src = hw_vsi_id; |
| if (m_list_itr->fltr_info.lkup_type != ICE_SW_LKUP_MAC || |
| is_zero_ether_addr(add)) |
| return ICE_ERR_PARAM; |
| if (is_unicast_ether_addr(add) && !hw->ucast_shared) { |
| /* Don't overwrite the unicast address */ |
| mutex_lock(rule_lock); |
| if (ice_find_rule_entry(hw, ICE_SW_LKUP_MAC, |
| &m_list_itr->fltr_info)) { |
| mutex_unlock(rule_lock); |
| return ICE_ERR_ALREADY_EXISTS; |
| } |
| mutex_unlock(rule_lock); |
| num_unicast++; |
| } else if (is_multicast_ether_addr(add) || |
| (is_unicast_ether_addr(add) && hw->ucast_shared)) { |
| m_list_itr->status = |
| ice_add_rule_internal(hw, ICE_SW_LKUP_MAC, |
| m_list_itr); |
| if (m_list_itr->status) |
| return m_list_itr->status; |
| } |
| } |
| |
| mutex_lock(rule_lock); |
| /* Exit if no suitable entries were found for adding bulk switch rule */ |
| if (!num_unicast) { |
| status = 0; |
| goto ice_add_mac_exit; |
| } |
| |
| rule_head = &sw->recp_list[ICE_SW_LKUP_MAC].filt_rules; |
| |
| /* Allocate switch rule buffer for the bulk update for unicast */ |
| s_rule_size = ICE_SW_RULE_RX_TX_ETH_HDR_SIZE; |
| s_rule = devm_kcalloc(ice_hw_to_dev(hw), num_unicast, s_rule_size, |
| GFP_KERNEL); |
| if (!s_rule) { |
| status = ICE_ERR_NO_MEMORY; |
| goto ice_add_mac_exit; |
| } |
| |
| r_iter = s_rule; |
| list_for_each_entry(m_list_itr, m_list, list_entry) { |
| struct ice_fltr_info *f_info = &m_list_itr->fltr_info; |
| u8 *mac_addr = &f_info->l_data.mac.mac_addr[0]; |
| |
| if (is_unicast_ether_addr(mac_addr)) { |
| ice_fill_sw_rule(hw, &m_list_itr->fltr_info, r_iter, |
| ice_aqc_opc_add_sw_rules); |
| r_iter = (struct ice_aqc_sw_rules_elem *) |
| ((u8 *)r_iter + s_rule_size); |
| } |
| } |
| |
| /* Call AQ bulk switch rule update for all unicast addresses */ |
| r_iter = s_rule; |
| /* Call AQ switch rule in AQ_MAX chunk */ |
| for (total_elem_left = num_unicast; total_elem_left > 0; |
| total_elem_left -= elem_sent) { |
| struct ice_aqc_sw_rules_elem *entry = r_iter; |
| |
| elem_sent = min_t(u8, total_elem_left, |
| (ICE_AQ_MAX_BUF_LEN / s_rule_size)); |
| status = ice_aq_sw_rules(hw, entry, elem_sent * s_rule_size, |
| elem_sent, ice_aqc_opc_add_sw_rules, |
| NULL); |
| if (status) |
| goto ice_add_mac_exit; |
| r_iter = (struct ice_aqc_sw_rules_elem *) |
| ((u8 *)r_iter + (elem_sent * s_rule_size)); |
| } |
| |
| /* Fill up rule ID based on the value returned from FW */ |
| r_iter = s_rule; |
| list_for_each_entry(m_list_itr, m_list, list_entry) { |
| struct ice_fltr_info *f_info = &m_list_itr->fltr_info; |
| u8 *mac_addr = &f_info->l_data.mac.mac_addr[0]; |
| struct ice_fltr_mgmt_list_entry *fm_entry; |
| |
| if (is_unicast_ether_addr(mac_addr)) { |
| f_info->fltr_rule_id = |
| le16_to_cpu(r_iter->pdata.lkup_tx_rx.index); |
| f_info->fltr_act = ICE_FWD_TO_VSI; |
| /* Create an entry to track this MAC address */ |
| fm_entry = devm_kzalloc(ice_hw_to_dev(hw), |
| sizeof(*fm_entry), GFP_KERNEL); |
| if (!fm_entry) { |
| status = ICE_ERR_NO_MEMORY; |
| goto ice_add_mac_exit; |
| } |
| fm_entry->fltr_info = *f_info; |
| fm_entry->vsi_count = 1; |
| /* The book keeping entries will get removed when |
| * base driver calls remove filter AQ command |
| */ |
| |
| list_add(&fm_entry->list_entry, rule_head); |
| r_iter = (struct ice_aqc_sw_rules_elem *) |
| ((u8 *)r_iter + s_rule_size); |
| } |
| } |
| |
| ice_add_mac_exit: |
| mutex_unlock(rule_lock); |
| if (s_rule) |
| devm_kfree(ice_hw_to_dev(hw), s_rule); |
| return status; |
| } |
| |
| /** |
| * ice_add_vlan_internal - Add one VLAN based filter rule |
| * @hw: pointer to the hardware structure |
| * @f_entry: filter entry containing one VLAN information |
| */ |
| static enum ice_status |
| ice_add_vlan_internal(struct ice_hw *hw, struct ice_fltr_list_entry *f_entry) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_fltr_mgmt_list_entry *v_list_itr; |
| struct ice_fltr_info *new_fltr, *cur_fltr; |
| enum ice_sw_lkup_type lkup_type; |
| u16 vsi_list_id = 0, vsi_handle; |
| struct mutex *rule_lock; /* Lock to protect filter rule list */ |
| enum ice_status status = 0; |
| |
| if (!ice_is_vsi_valid(hw, f_entry->fltr_info.vsi_handle)) |
| return ICE_ERR_PARAM; |
| |
| f_entry->fltr_info.fwd_id.hw_vsi_id = |
| ice_get_hw_vsi_num(hw, f_entry->fltr_info.vsi_handle); |
| new_fltr = &f_entry->fltr_info; |
| |
| /* VLAN ID should only be 12 bits */ |
| if (new_fltr->l_data.vlan.vlan_id > ICE_MAX_VLAN_ID) |
| return ICE_ERR_PARAM; |
| |
| if (new_fltr->src_id != ICE_SRC_ID_VSI) |
| return ICE_ERR_PARAM; |
| |
| new_fltr->src = new_fltr->fwd_id.hw_vsi_id; |
| lkup_type = new_fltr->lkup_type; |
| vsi_handle = new_fltr->vsi_handle; |
| rule_lock = &sw->recp_list[ICE_SW_LKUP_VLAN].filt_rule_lock; |
| mutex_lock(rule_lock); |
| v_list_itr = ice_find_rule_entry(hw, ICE_SW_LKUP_VLAN, new_fltr); |
| if (!v_list_itr) { |
| struct ice_vsi_list_map_info *map_info = NULL; |
| |
| if (new_fltr->fltr_act == ICE_FWD_TO_VSI) { |
| /* All VLAN pruning rules use a VSI list. Check if |
| * there is already a VSI list containing VSI that we |
| * want to add. If found, use the same vsi_list_id for |
| * this new VLAN rule or else create a new list. |
| */ |
| map_info = ice_find_vsi_list_entry(hw, ICE_SW_LKUP_VLAN, |
| vsi_handle, |
| &vsi_list_id); |
| if (!map_info) { |
| status = ice_create_vsi_list_rule(hw, |
| &vsi_handle, |
| 1, |
| &vsi_list_id, |
| lkup_type); |
| if (status) |
| goto exit; |
| } |
| /* Convert the action to forwarding to a VSI list. */ |
| new_fltr->fltr_act = ICE_FWD_TO_VSI_LIST; |
| new_fltr->fwd_id.vsi_list_id = vsi_list_id; |
| } |
| |
| status = ice_create_pkt_fwd_rule(hw, f_entry); |
| if (!status) { |
| v_list_itr = ice_find_rule_entry(hw, ICE_SW_LKUP_VLAN, |
| new_fltr); |
| if (!v_list_itr) { |
| status = ICE_ERR_DOES_NOT_EXIST; |
| goto exit; |
| } |
| /* reuse VSI list for new rule and increment ref_cnt */ |
| if (map_info) { |
| v_list_itr->vsi_list_info = map_info; |
| map_info->ref_cnt++; |
| } else { |
| v_list_itr->vsi_list_info = |
| ice_create_vsi_list_map(hw, &vsi_handle, |
| 1, vsi_list_id); |
| } |
| } |
| } else if (v_list_itr->vsi_list_info->ref_cnt == 1) { |
| /* Update existing VSI list to add new VSI ID only if it used |
| * by one VLAN rule. |
| */ |
| cur_fltr = &v_list_itr->fltr_info; |
| status = ice_add_update_vsi_list(hw, v_list_itr, cur_fltr, |
| new_fltr); |
| } else { |
| /* If VLAN rule exists and VSI list being used by this rule is |
| * referenced by more than 1 VLAN rule. Then create a new VSI |
| * list appending previous VSI with new VSI and update existing |
| * VLAN rule to point to new VSI list ID |
| */ |
| struct ice_fltr_info tmp_fltr; |
| u16 vsi_handle_arr[2]; |
| u16 cur_handle; |
| |
| /* Current implementation only supports reusing VSI list with |
| * one VSI count. We should never hit below condition |
| */ |
| if (v_list_itr->vsi_count > 1 && |
| v_list_itr->vsi_list_info->ref_cnt > 1) { |
| ice_debug(hw, ICE_DBG_SW, "Invalid configuration: Optimization to reuse VSI list with more than one VSI is not being done yet\n"); |
| status = ICE_ERR_CFG; |
| goto exit; |
| } |
| |
| cur_handle = |
| find_first_bit(v_list_itr->vsi_list_info->vsi_map, |
| ICE_MAX_VSI); |
| |
| /* A rule already exists with the new VSI being added */ |
| if (cur_handle == vsi_handle) { |
| status = ICE_ERR_ALREADY_EXISTS; |
| goto exit; |
| } |
| |
| vsi_handle_arr[0] = cur_handle; |
| vsi_handle_arr[1] = vsi_handle; |
| status = ice_create_vsi_list_rule(hw, &vsi_handle_arr[0], 2, |
| &vsi_list_id, lkup_type); |
| if (status) |
| goto exit; |
| |
| tmp_fltr = v_list_itr->fltr_info; |
| tmp_fltr.fltr_rule_id = v_list_itr->fltr_info.fltr_rule_id; |
| tmp_fltr.fwd_id.vsi_list_id = vsi_list_id; |
| tmp_fltr.fltr_act = ICE_FWD_TO_VSI_LIST; |
| /* Update the previous switch rule to a new VSI list which |
| * includes current VSI that is requested |
| */ |
| status = ice_update_pkt_fwd_rule(hw, &tmp_fltr); |
| if (status) |
| goto exit; |
| |
| /* before overriding VSI list map info. decrement ref_cnt of |
| * previous VSI list |
| */ |
| v_list_itr->vsi_list_info->ref_cnt--; |
| |
| /* now update to newly created list */ |
| v_list_itr->fltr_info.fwd_id.vsi_list_id = vsi_list_id; |
| v_list_itr->vsi_list_info = |
| ice_create_vsi_list_map(hw, &vsi_handle_arr[0], 2, |
| vsi_list_id); |
| v_list_itr->vsi_count++; |
| } |
| |
| exit: |
| mutex_unlock(rule_lock); |
| return status; |
| } |
| |
| /** |
| * ice_add_vlan - Add VLAN based filter rule |
| * @hw: pointer to the hardware structure |
| * @v_list: list of VLAN entries and forwarding information |
| */ |
| enum ice_status ice_add_vlan(struct ice_hw *hw, struct list_head *v_list) |
| { |
| struct ice_fltr_list_entry *v_list_itr; |
| |
| if (!v_list || !hw) |
| return ICE_ERR_PARAM; |
| |
| list_for_each_entry(v_list_itr, v_list, list_entry) { |
| if (v_list_itr->fltr_info.lkup_type != ICE_SW_LKUP_VLAN) |
| return ICE_ERR_PARAM; |
| v_list_itr->fltr_info.flag = ICE_FLTR_TX; |
| v_list_itr->status = ice_add_vlan_internal(hw, v_list_itr); |
| if (v_list_itr->status) |
| return v_list_itr->status; |
| } |
| return 0; |
| } |
| |
| /** |
| * ice_add_eth_mac - Add ethertype and MAC based filter rule |
| * @hw: pointer to the hardware structure |
| * @em_list: list of ether type MAC filter, MAC is optional |
| * |
| * This function requires the caller to populate the entries in |
| * the filter list with the necessary fields (including flags to |
| * indicate Tx or Rx rules). |
| */ |
| enum ice_status |
| ice_add_eth_mac(struct ice_hw *hw, struct list_head *em_list) |
| { |
| struct ice_fltr_list_entry *em_list_itr; |
| |
| if (!em_list || !hw) |
| return ICE_ERR_PARAM; |
| |
| list_for_each_entry(em_list_itr, em_list, list_entry) { |
| enum ice_sw_lkup_type l_type = |
| em_list_itr->fltr_info.lkup_type; |
| |
| if (l_type != ICE_SW_LKUP_ETHERTYPE_MAC && |
| l_type != ICE_SW_LKUP_ETHERTYPE) |
| return ICE_ERR_PARAM; |
| |
| em_list_itr->status = ice_add_rule_internal(hw, l_type, |
| em_list_itr); |
| if (em_list_itr->status) |
| return em_list_itr->status; |
| } |
| return 0; |
| } |
| |
| /** |
| * ice_remove_eth_mac - Remove an ethertype (or MAC) based filter rule |
| * @hw: pointer to the hardware structure |
| * @em_list: list of ethertype or ethertype MAC entries |
| */ |
| enum ice_status |
| ice_remove_eth_mac(struct ice_hw *hw, struct list_head *em_list) |
| { |
| struct ice_fltr_list_entry *em_list_itr, *tmp; |
| |
| if (!em_list || !hw) |
| return ICE_ERR_PARAM; |
| |
| list_for_each_entry_safe(em_list_itr, tmp, em_list, list_entry) { |
| enum ice_sw_lkup_type l_type = |
| em_list_itr->fltr_info.lkup_type; |
| |
| if (l_type != ICE_SW_LKUP_ETHERTYPE_MAC && |
| l_type != ICE_SW_LKUP_ETHERTYPE) |
| return ICE_ERR_PARAM; |
| |
| em_list_itr->status = ice_remove_rule_internal(hw, l_type, |
| em_list_itr); |
| if (em_list_itr->status) |
| return em_list_itr->status; |
| } |
| return 0; |
| } |
| |
| /** |
| * ice_rem_sw_rule_info |
| * @hw: pointer to the hardware structure |
| * @rule_head: pointer to the switch list structure that we want to delete |
| */ |
| static void |
| ice_rem_sw_rule_info(struct ice_hw *hw, struct list_head *rule_head) |
| { |
| if (!list_empty(rule_head)) { |
| struct ice_fltr_mgmt_list_entry *entry; |
| struct ice_fltr_mgmt_list_entry *tmp; |
| |
| list_for_each_entry_safe(entry, tmp, rule_head, list_entry) { |
| list_del(&entry->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), entry); |
| } |
| } |
| } |
| |
| /** |
| * ice_cfg_dflt_vsi - change state of VSI to set/clear default |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: VSI handle to set as default |
| * @set: true to add the above mentioned switch rule, false to remove it |
| * @direction: ICE_FLTR_RX or ICE_FLTR_TX |
| * |
| * add filter rule to set/unset given VSI as default VSI for the switch |
| * (represented by swid) |
| */ |
| enum ice_status |
| ice_cfg_dflt_vsi(struct ice_hw *hw, u16 vsi_handle, bool set, u8 direction) |
| { |
| struct ice_aqc_sw_rules_elem *s_rule; |
| struct ice_fltr_info f_info; |
| enum ice_adminq_opc opcode; |
| enum ice_status status; |
| u16 s_rule_size; |
| u16 hw_vsi_id; |
| |
| if (!ice_is_vsi_valid(hw, vsi_handle)) |
| return ICE_ERR_PARAM; |
| hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle); |
| |
| s_rule_size = set ? ICE_SW_RULE_RX_TX_ETH_HDR_SIZE : |
| ICE_SW_RULE_RX_TX_NO_HDR_SIZE; |
| |
| s_rule = devm_kzalloc(ice_hw_to_dev(hw), s_rule_size, GFP_KERNEL); |
| if (!s_rule) |
| return ICE_ERR_NO_MEMORY; |
| |
| memset(&f_info, 0, sizeof(f_info)); |
| |
| f_info.lkup_type = ICE_SW_LKUP_DFLT; |
| f_info.flag = direction; |
| f_info.fltr_act = ICE_FWD_TO_VSI; |
| f_info.fwd_id.hw_vsi_id = hw_vsi_id; |
| |
| if (f_info.flag & ICE_FLTR_RX) { |
| f_info.src = hw->port_info->lport; |
| f_info.src_id = ICE_SRC_ID_LPORT; |
| if (!set) |
| f_info.fltr_rule_id = |
| hw->port_info->dflt_rx_vsi_rule_id; |
| } else if (f_info.flag & ICE_FLTR_TX) { |
| f_info.src_id = ICE_SRC_ID_VSI; |
| f_info.src = hw_vsi_id; |
| if (!set) |
| f_info.fltr_rule_id = |
| hw->port_info->dflt_tx_vsi_rule_id; |
| } |
| |
| if (set) |
| opcode = ice_aqc_opc_add_sw_rules; |
| else |
| opcode = ice_aqc_opc_remove_sw_rules; |
| |
| ice_fill_sw_rule(hw, &f_info, s_rule, opcode); |
| |
| status = ice_aq_sw_rules(hw, s_rule, s_rule_size, 1, opcode, NULL); |
| if (status || !(f_info.flag & ICE_FLTR_TX_RX)) |
| goto out; |
| if (set) { |
| u16 index = le16_to_cpu(s_rule->pdata.lkup_tx_rx.index); |
| |
| if (f_info.flag & ICE_FLTR_TX) { |
| hw->port_info->dflt_tx_vsi_num = hw_vsi_id; |
| hw->port_info->dflt_tx_vsi_rule_id = index; |
| } else if (f_info.flag & ICE_FLTR_RX) { |
| hw->port_info->dflt_rx_vsi_num = hw_vsi_id; |
| hw->port_info->dflt_rx_vsi_rule_id = index; |
| } |
| } else { |
| if (f_info.flag & ICE_FLTR_TX) { |
| hw->port_info->dflt_tx_vsi_num = ICE_DFLT_VSI_INVAL; |
| hw->port_info->dflt_tx_vsi_rule_id = ICE_INVAL_ACT; |
| } else if (f_info.flag & ICE_FLTR_RX) { |
| hw->port_info->dflt_rx_vsi_num = ICE_DFLT_VSI_INVAL; |
| hw->port_info->dflt_rx_vsi_rule_id = ICE_INVAL_ACT; |
| } |
| } |
| |
| out: |
| devm_kfree(ice_hw_to_dev(hw), s_rule); |
| return status; |
| } |
| |
| /** |
| * ice_find_ucast_rule_entry - Search for a unicast MAC filter rule entry |
| * @hw: pointer to the hardware structure |
| * @recp_id: lookup type for which the specified rule needs to be searched |
| * @f_info: rule information |
| * |
| * Helper function to search for a unicast rule entry - this is to be used |
| * to remove unicast MAC filter that is not shared with other VSIs on the |
| * PF switch. |
| * |
| * Returns pointer to entry storing the rule if found |
| */ |
| static struct ice_fltr_mgmt_list_entry * |
| ice_find_ucast_rule_entry(struct ice_hw *hw, u8 recp_id, |
| struct ice_fltr_info *f_info) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_fltr_mgmt_list_entry *list_itr; |
| struct list_head *list_head; |
| |
| list_head = &sw->recp_list[recp_id].filt_rules; |
| list_for_each_entry(list_itr, list_head, list_entry) { |
| if (!memcmp(&f_info->l_data, &list_itr->fltr_info.l_data, |
| sizeof(f_info->l_data)) && |
| f_info->fwd_id.hw_vsi_id == |
| list_itr->fltr_info.fwd_id.hw_vsi_id && |
| f_info->flag == list_itr->fltr_info.flag) |
| return list_itr; |
| } |
| return NULL; |
| } |
| |
| /** |
| * ice_remove_mac - remove a MAC address based filter rule |
| * @hw: pointer to the hardware structure |
| * @m_list: list of MAC addresses and forwarding information |
| * |
| * This function removes either a MAC filter rule or a specific VSI from a |
| * VSI list for a multicast MAC address. |
| * |
| * Returns ICE_ERR_DOES_NOT_EXIST if a given entry was not added by |
| * ice_add_mac. Caller should be aware that this call will only work if all |
| * the entries passed into m_list were added previously. It will not attempt to |
| * do a partial remove of entries that were found. |
| */ |
| enum ice_status ice_remove_mac(struct ice_hw *hw, struct list_head *m_list) |
| { |
| struct ice_fltr_list_entry *list_itr, *tmp; |
| struct mutex *rule_lock; /* Lock to protect filter rule list */ |
| |
| if (!m_list) |
| return ICE_ERR_PARAM; |
| |
| rule_lock = &hw->switch_info->recp_list[ICE_SW_LKUP_MAC].filt_rule_lock; |
| list_for_each_entry_safe(list_itr, tmp, m_list, list_entry) { |
| enum ice_sw_lkup_type l_type = list_itr->fltr_info.lkup_type; |
| u8 *add = &list_itr->fltr_info.l_data.mac.mac_addr[0]; |
| u16 vsi_handle; |
| |
| if (l_type != ICE_SW_LKUP_MAC) |
| return ICE_ERR_PARAM; |
| |
| vsi_handle = list_itr->fltr_info.vsi_handle; |
| if (!ice_is_vsi_valid(hw, vsi_handle)) |
| return ICE_ERR_PARAM; |
| |
| list_itr->fltr_info.fwd_id.hw_vsi_id = |
| ice_get_hw_vsi_num(hw, vsi_handle); |
| if (is_unicast_ether_addr(add) && !hw->ucast_shared) { |
| /* Don't remove the unicast address that belongs to |
| * another VSI on the switch, since it is not being |
| * shared... |
| */ |
| mutex_lock(rule_lock); |
| if (!ice_find_ucast_rule_entry(hw, ICE_SW_LKUP_MAC, |
| &list_itr->fltr_info)) { |
| mutex_unlock(rule_lock); |
| return ICE_ERR_DOES_NOT_EXIST; |
| } |
| mutex_unlock(rule_lock); |
| } |
| list_itr->status = ice_remove_rule_internal(hw, |
| ICE_SW_LKUP_MAC, |
| list_itr); |
| if (list_itr->status) |
| return list_itr->status; |
| } |
| return 0; |
| } |
| |
| /** |
| * ice_remove_vlan - Remove VLAN based filter rule |
| * @hw: pointer to the hardware structure |
| * @v_list: list of VLAN entries and forwarding information |
| */ |
| enum ice_status |
| ice_remove_vlan(struct ice_hw *hw, struct list_head *v_list) |
| { |
| struct ice_fltr_list_entry *v_list_itr, *tmp; |
| |
| if (!v_list || !hw) |
| return ICE_ERR_PARAM; |
| |
| list_for_each_entry_safe(v_list_itr, tmp, v_list, list_entry) { |
| enum ice_sw_lkup_type l_type = v_list_itr->fltr_info.lkup_type; |
| |
| if (l_type != ICE_SW_LKUP_VLAN) |
| return ICE_ERR_PARAM; |
| v_list_itr->status = ice_remove_rule_internal(hw, |
| ICE_SW_LKUP_VLAN, |
| v_list_itr); |
| if (v_list_itr->status) |
| return v_list_itr->status; |
| } |
| return 0; |
| } |
| |
| /** |
| * ice_vsi_uses_fltr - Determine if given VSI uses specified filter |
| * @fm_entry: filter entry to inspect |
| * @vsi_handle: VSI handle to compare with filter info |
| */ |
| static bool |
| ice_vsi_uses_fltr(struct ice_fltr_mgmt_list_entry *fm_entry, u16 vsi_handle) |
| { |
| return ((fm_entry->fltr_info.fltr_act == ICE_FWD_TO_VSI && |
| fm_entry->fltr_info.vsi_handle == vsi_handle) || |
| (fm_entry->fltr_info.fltr_act == ICE_FWD_TO_VSI_LIST && |
| fm_entry->vsi_list_info && |
| (test_bit(vsi_handle, fm_entry->vsi_list_info->vsi_map)))); |
| } |
| |
| /** |
| * ice_add_entry_to_vsi_fltr_list - Add copy of fltr_list_entry to remove list |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: VSI handle to remove filters from |
| * @vsi_list_head: pointer to the list to add entry to |
| * @fi: pointer to fltr_info of filter entry to copy & add |
| * |
| * Helper function, used when creating a list of filters to remove from |
| * a specific VSI. The entry added to vsi_list_head is a COPY of the |
| * original filter entry, with the exception of fltr_info.fltr_act and |
| * fltr_info.fwd_id fields. These are set such that later logic can |
| * extract which VSI to remove the fltr from, and pass on that information. |
| */ |
| static enum ice_status |
| ice_add_entry_to_vsi_fltr_list(struct ice_hw *hw, u16 vsi_handle, |
| struct list_head *vsi_list_head, |
| struct ice_fltr_info *fi) |
| { |
| struct ice_fltr_list_entry *tmp; |
| |
| /* this memory is freed up in the caller function |
| * once filters for this VSI are removed |
| */ |
| tmp = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*tmp), GFP_KERNEL); |
| if (!tmp) |
| return ICE_ERR_NO_MEMORY; |
| |
| tmp->fltr_info = *fi; |
| |
| /* Overwrite these fields to indicate which VSI to remove filter from, |
| * so find and remove logic can extract the information from the |
| * list entries. Note that original entries will still have proper |
| * values. |
| */ |
| tmp->fltr_info.fltr_act = ICE_FWD_TO_VSI; |
| tmp->fltr_info.vsi_handle = vsi_handle; |
| tmp->fltr_info.fwd_id.hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle); |
| |
| list_add(&tmp->list_entry, vsi_list_head); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_add_to_vsi_fltr_list - Add VSI filters to the list |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: VSI handle to remove filters from |
| * @lkup_list_head: pointer to the list that has certain lookup type filters |
| * @vsi_list_head: pointer to the list pertaining to VSI with vsi_handle |
| * |
| * Locates all filters in lkup_list_head that are used by the given VSI, |
| * and adds COPIES of those entries to vsi_list_head (intended to be used |
| * to remove the listed filters). |
| * Note that this means all entries in vsi_list_head must be explicitly |
| * deallocated by the caller when done with list. |
| */ |
| static enum ice_status |
| ice_add_to_vsi_fltr_list(struct ice_hw *hw, u16 vsi_handle, |
| struct list_head *lkup_list_head, |
| struct list_head *vsi_list_head) |
| { |
| struct ice_fltr_mgmt_list_entry *fm_entry; |
| enum ice_status status = 0; |
| |
| /* check to make sure VSI ID is valid and within boundary */ |
| if (!ice_is_vsi_valid(hw, vsi_handle)) |
| return ICE_ERR_PARAM; |
| |
| list_for_each_entry(fm_entry, lkup_list_head, list_entry) { |
| if (!ice_vsi_uses_fltr(fm_entry, vsi_handle)) |
| continue; |
| |
| status = ice_add_entry_to_vsi_fltr_list(hw, vsi_handle, |
| vsi_list_head, |
| &fm_entry->fltr_info); |
| if (status) |
| return status; |
| } |
| return status; |
| } |
| |
| /** |
| * ice_determine_promisc_mask |
| * @fi: filter info to parse |
| * |
| * Helper function to determine which ICE_PROMISC_ mask corresponds |
| * to given filter into. |
| */ |
| static u8 ice_determine_promisc_mask(struct ice_fltr_info *fi) |
| { |
| u16 vid = fi->l_data.mac_vlan.vlan_id; |
| u8 *macaddr = fi->l_data.mac.mac_addr; |
| bool is_tx_fltr = false; |
| u8 promisc_mask = 0; |
| |
| if (fi->flag == ICE_FLTR_TX) |
| is_tx_fltr = true; |
| |
| if (is_broadcast_ether_addr(macaddr)) |
| promisc_mask |= is_tx_fltr ? |
| ICE_PROMISC_BCAST_TX : ICE_PROMISC_BCAST_RX; |
| else if (is_multicast_ether_addr(macaddr)) |
| promisc_mask |= is_tx_fltr ? |
| ICE_PROMISC_MCAST_TX : ICE_PROMISC_MCAST_RX; |
| else if (is_unicast_ether_addr(macaddr)) |
| promisc_mask |= is_tx_fltr ? |
| ICE_PROMISC_UCAST_TX : ICE_PROMISC_UCAST_RX; |
| if (vid) |
| promisc_mask |= is_tx_fltr ? |
| ICE_PROMISC_VLAN_TX : ICE_PROMISC_VLAN_RX; |
| |
| return promisc_mask; |
| } |
| |
| /** |
| * ice_remove_promisc - Remove promisc based filter rules |
| * @hw: pointer to the hardware structure |
| * @recp_id: recipe ID for which the rule needs to removed |
| * @v_list: list of promisc entries |
| */ |
| static enum ice_status |
| ice_remove_promisc(struct ice_hw *hw, u8 recp_id, |
| struct list_head *v_list) |
| { |
| struct ice_fltr_list_entry *v_list_itr, *tmp; |
| |
| list_for_each_entry_safe(v_list_itr, tmp, v_list, list_entry) { |
| v_list_itr->status = |
| ice_remove_rule_internal(hw, recp_id, v_list_itr); |
| if (v_list_itr->status) |
| return v_list_itr->status; |
| } |
| return 0; |
| } |
| |
| /** |
| * ice_clear_vsi_promisc - clear specified promiscuous mode(s) for given VSI |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: VSI handle to clear mode |
| * @promisc_mask: mask of promiscuous config bits to clear |
| * @vid: VLAN ID to clear VLAN promiscuous |
| */ |
| enum ice_status |
| ice_clear_vsi_promisc(struct ice_hw *hw, u16 vsi_handle, u8 promisc_mask, |
| u16 vid) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_fltr_list_entry *fm_entry, *tmp; |
| struct list_head remove_list_head; |
| struct ice_fltr_mgmt_list_entry *itr; |
| struct list_head *rule_head; |
| struct mutex *rule_lock; /* Lock to protect filter rule list */ |
| enum ice_status status = 0; |
| u8 recipe_id; |
| |
| if (!ice_is_vsi_valid(hw, vsi_handle)) |
| return ICE_ERR_PARAM; |
| |
| if (promisc_mask & (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX)) |
| recipe_id = ICE_SW_LKUP_PROMISC_VLAN; |
| else |
| recipe_id = ICE_SW_LKUP_PROMISC; |
| |
| rule_head = &sw->recp_list[recipe_id].filt_rules; |
| rule_lock = &sw->recp_list[recipe_id].filt_rule_lock; |
| |
| INIT_LIST_HEAD(&remove_list_head); |
| |
| mutex_lock(rule_lock); |
| list_for_each_entry(itr, rule_head, list_entry) { |
| struct ice_fltr_info *fltr_info; |
| u8 fltr_promisc_mask = 0; |
| |
| if (!ice_vsi_uses_fltr(itr, vsi_handle)) |
| continue; |
| fltr_info = &itr->fltr_info; |
| |
| if (recipe_id == ICE_SW_LKUP_PROMISC_VLAN && |
| vid != fltr_info->l_data.mac_vlan.vlan_id) |
| continue; |
| |
| fltr_promisc_mask |= ice_determine_promisc_mask(fltr_info); |
| |
| /* Skip if filter is not completely specified by given mask */ |
| if (fltr_promisc_mask & ~promisc_mask) |
| continue; |
| |
| status = ice_add_entry_to_vsi_fltr_list(hw, vsi_handle, |
| &remove_list_head, |
| fltr_info); |
| if (status) { |
| mutex_unlock(rule_lock); |
| goto free_fltr_list; |
| } |
| } |
| mutex_unlock(rule_lock); |
| |
| status = ice_remove_promisc(hw, recipe_id, &remove_list_head); |
| |
| free_fltr_list: |
| list_for_each_entry_safe(fm_entry, tmp, &remove_list_head, list_entry) { |
| list_del(&fm_entry->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), fm_entry); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * ice_set_vsi_promisc - set given VSI to given promiscuous mode(s) |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: VSI handle to configure |
| * @promisc_mask: mask of promiscuous config bits |
| * @vid: VLAN ID to set VLAN promiscuous |
| */ |
| enum ice_status |
| ice_set_vsi_promisc(struct ice_hw *hw, u16 vsi_handle, u8 promisc_mask, u16 vid) |
| { |
| enum { UCAST_FLTR = 1, MCAST_FLTR, BCAST_FLTR }; |
| struct ice_fltr_list_entry f_list_entry; |
| struct ice_fltr_info new_fltr; |
| enum ice_status status = 0; |
| bool is_tx_fltr; |
| u16 hw_vsi_id; |
| int pkt_type; |
| u8 recipe_id; |
| |
| if (!ice_is_vsi_valid(hw, vsi_handle)) |
| return ICE_ERR_PARAM; |
| hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle); |
| |
| memset(&new_fltr, 0, sizeof(new_fltr)); |
| |
| if (promisc_mask & (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX)) { |
| new_fltr.lkup_type = ICE_SW_LKUP_PROMISC_VLAN; |
| new_fltr.l_data.mac_vlan.vlan_id = vid; |
| recipe_id = ICE_SW_LKUP_PROMISC_VLAN; |
| } else { |
| new_fltr.lkup_type = ICE_SW_LKUP_PROMISC; |
| recipe_id = ICE_SW_LKUP_PROMISC; |
| } |
| |
| /* Separate filters must be set for each direction/packet type |
| * combination, so we will loop over the mask value, store the |
| * individual type, and clear it out in the input mask as it |
| * is found. |
| */ |
| while (promisc_mask) { |
| u8 *mac_addr; |
| |
| pkt_type = 0; |
| is_tx_fltr = false; |
| |
| if (promisc_mask & ICE_PROMISC_UCAST_RX) { |
| promisc_mask &= ~ICE_PROMISC_UCAST_RX; |
| pkt_type = UCAST_FLTR; |
| } else if (promisc_mask & ICE_PROMISC_UCAST_TX) { |
| promisc_mask &= ~ICE_PROMISC_UCAST_TX; |
| pkt_type = UCAST_FLTR; |
| is_tx_fltr = true; |
| } else if (promisc_mask & ICE_PROMISC_MCAST_RX) { |
| promisc_mask &= ~ICE_PROMISC_MCAST_RX; |
| pkt_type = MCAST_FLTR; |
| } else if (promisc_mask & ICE_PROMISC_MCAST_TX) { |
| promisc_mask &= ~ICE_PROMISC_MCAST_TX; |
| pkt_type = MCAST_FLTR; |
| is_tx_fltr = true; |
| } else if (promisc_mask & ICE_PROMISC_BCAST_RX) { |
| promisc_mask &= ~ICE_PROMISC_BCAST_RX; |
| pkt_type = BCAST_FLTR; |
| } else if (promisc_mask & ICE_PROMISC_BCAST_TX) { |
| promisc_mask &= ~ICE_PROMISC_BCAST_TX; |
| pkt_type = BCAST_FLTR; |
| is_tx_fltr = true; |
| } |
| |
| /* Check for VLAN promiscuous flag */ |
| if (promisc_mask & ICE_PROMISC_VLAN_RX) { |
| promisc_mask &= ~ICE_PROMISC_VLAN_RX; |
| } else if (promisc_mask & ICE_PROMISC_VLAN_TX) { |
| promisc_mask &= ~ICE_PROMISC_VLAN_TX; |
| is_tx_fltr = true; |
| } |
| |
| /* Set filter DA based on packet type */ |
| mac_addr = new_fltr.l_data.mac.mac_addr; |
| if (pkt_type == BCAST_FLTR) { |
| eth_broadcast_addr(mac_addr); |
| } else if (pkt_type == MCAST_FLTR || |
| pkt_type == UCAST_FLTR) { |
| /* Use the dummy ether header DA */ |
| ether_addr_copy(mac_addr, dummy_eth_header); |
| if (pkt_type == MCAST_FLTR) |
| mac_addr[0] |= 0x1; /* Set multicast bit */ |
| } |
| |
| /* Need to reset this to zero for all iterations */ |
| new_fltr.flag = 0; |
| if (is_tx_fltr) { |
| new_fltr.flag |= ICE_FLTR_TX; |
| new_fltr.src = hw_vsi_id; |
| } else { |
| new_fltr.flag |= ICE_FLTR_RX; |
| new_fltr.src = hw->port_info->lport; |
| } |
| |
| new_fltr.fltr_act = ICE_FWD_TO_VSI; |
| new_fltr.vsi_handle = vsi_handle; |
| new_fltr.fwd_id.hw_vsi_id = hw_vsi_id; |
| f_list_entry.fltr_info = new_fltr; |
| |
| status = ice_add_rule_internal(hw, recipe_id, &f_list_entry); |
| if (status) |
| goto set_promisc_exit; |
| } |
| |
| set_promisc_exit: |
| return status; |
| } |
| |
| /** |
| * ice_set_vlan_vsi_promisc |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: VSI handle to configure |
| * @promisc_mask: mask of promiscuous config bits |
| * @rm_vlan_promisc: Clear VLANs VSI promisc mode |
| * |
| * Configure VSI with all associated VLANs to given promiscuous mode(s) |
| */ |
| enum ice_status |
| ice_set_vlan_vsi_promisc(struct ice_hw *hw, u16 vsi_handle, u8 promisc_mask, |
| bool rm_vlan_promisc) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_fltr_list_entry *list_itr, *tmp; |
| struct list_head vsi_list_head; |
| struct list_head *vlan_head; |
| struct mutex *vlan_lock; /* Lock to protect filter rule list */ |
| enum ice_status status; |
| u16 vlan_id; |
| |
| INIT_LIST_HEAD(&vsi_list_head); |
| vlan_lock = &sw->recp_list[ICE_SW_LKUP_VLAN].filt_rule_lock; |
| vlan_head = &sw->recp_list[ICE_SW_LKUP_VLAN].filt_rules; |
| mutex_lock(vlan_lock); |
| status = ice_add_to_vsi_fltr_list(hw, vsi_handle, vlan_head, |
| &vsi_list_head); |
| mutex_unlock(vlan_lock); |
| if (status) |
| goto free_fltr_list; |
| |
| list_for_each_entry(list_itr, &vsi_list_head, list_entry) { |
| vlan_id = list_itr->fltr_info.l_data.vlan.vlan_id; |
| if (rm_vlan_promisc) |
| status = ice_clear_vsi_promisc(hw, vsi_handle, |
| promisc_mask, vlan_id); |
| else |
| status = ice_set_vsi_promisc(hw, vsi_handle, |
| promisc_mask, vlan_id); |
| if (status) |
| break; |
| } |
| |
| free_fltr_list: |
| list_for_each_entry_safe(list_itr, tmp, &vsi_list_head, list_entry) { |
| list_del(&list_itr->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), list_itr); |
| } |
| return status; |
| } |
| |
| /** |
| * ice_remove_vsi_lkup_fltr - Remove lookup type filters for a VSI |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: VSI handle to remove filters from |
| * @lkup: switch rule filter lookup type |
| */ |
| static void |
| ice_remove_vsi_lkup_fltr(struct ice_hw *hw, u16 vsi_handle, |
| enum ice_sw_lkup_type lkup) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| struct ice_fltr_list_entry *fm_entry; |
| struct list_head remove_list_head; |
| struct list_head *rule_head; |
| struct ice_fltr_list_entry *tmp; |
| struct mutex *rule_lock; /* Lock to protect filter rule list */ |
| enum ice_status status; |
| |
| INIT_LIST_HEAD(&remove_list_head); |
| rule_lock = &sw->recp_list[lkup].filt_rule_lock; |
| rule_head = &sw->recp_list[lkup].filt_rules; |
| mutex_lock(rule_lock); |
| status = ice_add_to_vsi_fltr_list(hw, vsi_handle, rule_head, |
| &remove_list_head); |
| mutex_unlock(rule_lock); |
| if (status) |
| goto free_fltr_list; |
| |
| switch (lkup) { |
| case ICE_SW_LKUP_MAC: |
| ice_remove_mac(hw, &remove_list_head); |
| break; |
| case ICE_SW_LKUP_VLAN: |
| ice_remove_vlan(hw, &remove_list_head); |
| break; |
| case ICE_SW_LKUP_PROMISC: |
| case ICE_SW_LKUP_PROMISC_VLAN: |
| ice_remove_promisc(hw, lkup, &remove_list_head); |
| break; |
| case ICE_SW_LKUP_MAC_VLAN: |
| case ICE_SW_LKUP_ETHERTYPE: |
| case ICE_SW_LKUP_ETHERTYPE_MAC: |
| case ICE_SW_LKUP_DFLT: |
| case ICE_SW_LKUP_LAST: |
| default: |
| ice_debug(hw, ICE_DBG_SW, "Unsupported lookup type %d\n", lkup); |
| break; |
| } |
| |
| free_fltr_list: |
| list_for_each_entry_safe(fm_entry, tmp, &remove_list_head, list_entry) { |
| list_del(&fm_entry->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), fm_entry); |
| } |
| } |
| |
| /** |
| * ice_remove_vsi_fltr - Remove all filters for a VSI |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: VSI handle to remove filters from |
| */ |
| void ice_remove_vsi_fltr(struct ice_hw *hw, u16 vsi_handle) |
| { |
| ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_MAC); |
| ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_MAC_VLAN); |
| ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_PROMISC); |
| ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_VLAN); |
| ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_DFLT); |
| ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_ETHERTYPE); |
| ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_ETHERTYPE_MAC); |
| ice_remove_vsi_lkup_fltr(hw, vsi_handle, ICE_SW_LKUP_PROMISC_VLAN); |
| } |
| |
| /** |
| * ice_alloc_res_cntr - allocating resource counter |
| * @hw: pointer to the hardware structure |
| * @type: type of resource |
| * @alloc_shared: if set it is shared else dedicated |
| * @num_items: number of entries requested for FD resource type |
| * @counter_id: counter index returned by AQ call |
| */ |
| enum ice_status |
| ice_alloc_res_cntr(struct ice_hw *hw, u8 type, u8 alloc_shared, u16 num_items, |
| u16 *counter_id) |
| { |
| struct ice_aqc_alloc_free_res_elem *buf; |
| enum ice_status status; |
| u16 buf_len; |
| |
| /* Allocate resource */ |
| buf_len = struct_size(buf, elem, 1); |
| buf = kzalloc(buf_len, GFP_KERNEL); |
| if (!buf) |
| return ICE_ERR_NO_MEMORY; |
| |
| buf->num_elems = cpu_to_le16(num_items); |
| buf->res_type = cpu_to_le16(((type << ICE_AQC_RES_TYPE_S) & |
| ICE_AQC_RES_TYPE_M) | alloc_shared); |
| |
| status = ice_aq_alloc_free_res(hw, 1, buf, buf_len, |
| ice_aqc_opc_alloc_res, NULL); |
| if (status) |
| goto exit; |
| |
| *counter_id = le16_to_cpu(buf->elem[0].e.sw_resp); |
| |
| exit: |
| kfree(buf); |
| return status; |
| } |
| |
| /** |
| * ice_free_res_cntr - free resource counter |
| * @hw: pointer to the hardware structure |
| * @type: type of resource |
| * @alloc_shared: if set it is shared else dedicated |
| * @num_items: number of entries to be freed for FD resource type |
| * @counter_id: counter ID resource which needs to be freed |
| */ |
| enum ice_status |
| ice_free_res_cntr(struct ice_hw *hw, u8 type, u8 alloc_shared, u16 num_items, |
| u16 counter_id) |
| { |
| struct ice_aqc_alloc_free_res_elem *buf; |
| enum ice_status status; |
| u16 buf_len; |
| |
| /* Free resource */ |
| buf_len = struct_size(buf, elem, 1); |
| buf = kzalloc(buf_len, GFP_KERNEL); |
| if (!buf) |
| return ICE_ERR_NO_MEMORY; |
| |
| buf->num_elems = cpu_to_le16(num_items); |
| buf->res_type = cpu_to_le16(((type << ICE_AQC_RES_TYPE_S) & |
| ICE_AQC_RES_TYPE_M) | alloc_shared); |
| buf->elem[0].e.sw_resp = cpu_to_le16(counter_id); |
| |
| status = ice_aq_alloc_free_res(hw, 1, buf, buf_len, |
| ice_aqc_opc_free_res, NULL); |
| if (status) |
| ice_debug(hw, ICE_DBG_SW, "counter resource could not be freed\n"); |
| |
| kfree(buf); |
| return status; |
| } |
| |
| /** |
| * ice_replay_vsi_fltr - Replay filters for requested VSI |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: driver VSI handle |
| * @recp_id: Recipe ID for which rules need to be replayed |
| * @list_head: list for which filters need to be replayed |
| * |
| * Replays the filter of recipe recp_id for a VSI represented via vsi_handle. |
| * It is required to pass valid VSI handle. |
| */ |
| static enum ice_status |
| ice_replay_vsi_fltr(struct ice_hw *hw, u16 vsi_handle, u8 recp_id, |
| struct list_head *list_head) |
| { |
| struct ice_fltr_mgmt_list_entry *itr; |
| enum ice_status status = 0; |
| u16 hw_vsi_id; |
| |
| if (list_empty(list_head)) |
| return status; |
| hw_vsi_id = ice_get_hw_vsi_num(hw, vsi_handle); |
| |
| list_for_each_entry(itr, list_head, list_entry) { |
| struct ice_fltr_list_entry f_entry; |
| |
| f_entry.fltr_info = itr->fltr_info; |
| if (itr->vsi_count < 2 && recp_id != ICE_SW_LKUP_VLAN && |
| itr->fltr_info.vsi_handle == vsi_handle) { |
| /* update the src in case it is VSI num */ |
| if (f_entry.fltr_info.src_id == ICE_SRC_ID_VSI) |
| f_entry.fltr_info.src = hw_vsi_id; |
| status = ice_add_rule_internal(hw, recp_id, &f_entry); |
| if (status) |
| goto end; |
| continue; |
| } |
| if (!itr->vsi_list_info || |
| !test_bit(vsi_handle, itr->vsi_list_info->vsi_map)) |
| continue; |
| /* Clearing it so that the logic can add it back */ |
| clear_bit(vsi_handle, itr->vsi_list_info->vsi_map); |
| f_entry.fltr_info.vsi_handle = vsi_handle; |
| f_entry.fltr_info.fltr_act = ICE_FWD_TO_VSI; |
| /* update the src in case it is VSI num */ |
| if (f_entry.fltr_info.src_id == ICE_SRC_ID_VSI) |
| f_entry.fltr_info.src = hw_vsi_id; |
| if (recp_id == ICE_SW_LKUP_VLAN) |
| status = ice_add_vlan_internal(hw, &f_entry); |
| else |
| status = ice_add_rule_internal(hw, recp_id, &f_entry); |
| if (status) |
| goto end; |
| } |
| end: |
| return status; |
| } |
| |
| /** |
| * ice_replay_vsi_all_fltr - replay all filters stored in bookkeeping lists |
| * @hw: pointer to the hardware structure |
| * @vsi_handle: driver VSI handle |
| * |
| * Replays filters for requested VSI via vsi_handle. |
| */ |
| enum ice_status ice_replay_vsi_all_fltr(struct ice_hw *hw, u16 vsi_handle) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| enum ice_status status = 0; |
| u8 i; |
| |
| for (i = 0; i < ICE_SW_LKUP_LAST; i++) { |
| struct list_head *head; |
| |
| head = &sw->recp_list[i].filt_replay_rules; |
| status = ice_replay_vsi_fltr(hw, vsi_handle, i, head); |
| if (status) |
| return status; |
| } |
| return status; |
| } |
| |
| /** |
| * ice_rm_all_sw_replay_rule_info - deletes filter replay rules |
| * @hw: pointer to the HW struct |
| * |
| * Deletes the filter replay rules. |
| */ |
| void ice_rm_all_sw_replay_rule_info(struct ice_hw *hw) |
| { |
| struct ice_switch_info *sw = hw->switch_info; |
| u8 i; |
| |
| if (!sw) |
| return; |
| |
| for (i = 0; i < ICE_SW_LKUP_LAST; i++) { |
| if (!list_empty(&sw->recp_list[i].filt_replay_rules)) { |
| struct list_head *l_head; |
| |
| l_head = &sw->recp_list[i].filt_replay_rules; |
| ice_rem_sw_rule_info(hw, l_head); |
| } |
| } |
| } |