drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*******************************************************************************
   Copyright (C) 2007-2009  STMicroelectronics Ltd


   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/

 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include "common.h"
 #include "dwmac_dma.h"

 #define GMAC_HI_REG_AE		0x80000000

 int dwmac_dma_reset(void __iomem *ioaddr)
 {
 	u32 value = readl(ioaddr + DMA_BUS_MODE);

 	/* DMA SW reset */
 	value |= DMA_BUS_MODE_SFT_RESET;
 	writel(value, ioaddr + DMA_BUS_MODE);

 	return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
 				 !(value & DMA_BUS_MODE_SFT_RESET),
 				 10000, 200000);
 }

 /* CSR1 enables the transmit DMA to check for new descriptor */
 void dwmac_enable_dma_transmission(void __iomem *ioaddr)
 {
 	writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
 }

 void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
 {
 	u32 value = readl(ioaddr + DMA_INTR_ENA);

 	if (rx)
 		value |= DMA_INTR_DEFAULT_RX;
 	if (tx)
 		value |= DMA_INTR_DEFAULT_TX;

 	writel(value, ioaddr + DMA_INTR_ENA);
 }

 void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
 {
 	u32 value = readl(ioaddr + DMA_INTR_ENA);

 	if (rx)
 		value &= ~DMA_INTR_DEFAULT_RX;
 	if (tx)
 		value &= ~DMA_INTR_DEFAULT_TX;

 	writel(value, ioaddr + DMA_INTR_ENA);
 }

 void dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan)
 {
 	u32 value = readl(ioaddr + DMA_CONTROL);
 	value |= DMA_CONTROL_ST;
 	writel(value, ioaddr + DMA_CONTROL);
 }

 void dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan)
 {
 	u32 value = readl(ioaddr + DMA_CONTROL);
 	value &= ~DMA_CONTROL_ST;
 	writel(value, ioaddr + DMA_CONTROL);
 }

 void dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan)
 {
 	u32 value = readl(ioaddr + DMA_CONTROL);
 	value |= DMA_CONTROL_SR;
 	writel(value, ioaddr + DMA_CONTROL);
 }

 void dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan)
 {
 	u32 value = readl(ioaddr + DMA_CONTROL);
 	value &= ~DMA_CONTROL_SR;
 	writel(value, ioaddr + DMA_CONTROL);
 }

 #ifdef DWMAC_DMA_DEBUG
 static void show_tx_process_state(unsigned int status)
 {
 	unsigned int state;
 	state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;

 	switch (state) {
 	case 0:
 		pr_debug("- TX (Stopped): Reset or Stop command\n");
 		break;
 	case 1:
 		pr_debug("- TX (Running): Fetching the Tx desc\n");
 		break;
 	case 2:
 		pr_debug("- TX (Running): Waiting for end of tx\n");
 		break;
 	case 3:
 		pr_debug("- TX (Running): Reading the data "
 		       "and queuing the data into the Tx buf\n");
 		break;
 	case 6:
 		pr_debug("- TX (Suspended): Tx Buff Underflow "
 		       "or an unavailable Transmit descriptor\n");
 		break;
 	case 7:
 		pr_debug("- TX (Running): Closing Tx descriptor\n");
 		break;
 	default:
 		break;
 	}
 }

 static void show_rx_process_state(unsigned int status)
 {
 	unsigned int state;
 	state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;

 	switch (state) {
 	case 0:
 		pr_debug("- RX (Stopped): Reset or Stop command\n");
 		break;
 	case 1:
 		pr_debug("- RX (Running): Fetching the Rx desc\n");
 		break;
 	case 2:
 		pr_debug("- RX (Running): Checking for end of pkt\n");
 		break;
 	case 3:
 		pr_debug("- RX (Running): Waiting for Rx pkt\n");
 		break;
 	case 4:
 		pr_debug("- RX (Suspended): Unavailable Rx buf\n");
 		break;
 	case 5:
 		pr_debug("- RX (Running): Closing Rx descriptor\n");
 		break;
 	case 6:
 		pr_debug("- RX(Running): Flushing the current frame"
 		       " from the Rx buf\n");
 		break;
 	case 7:
 		pr_debug("- RX (Running): Queuing the Rx frame"
 		       " from the Rx buf into memory\n");
 		break;
 	default:
 		break;
 	}
 }
 #endif

 int dwmac_dma_interrupt(void __iomem *ioaddr,
 			struct stmmac_extra_stats *x, u32 chan, u32 dir)
 {
 	int ret = 0;
 	/* read the status register (CSR5) */
 	u32 intr_status = readl(ioaddr + DMA_STATUS);

 #ifdef DWMAC_DMA_DEBUG
 	/* Enable it to monitor DMA rx/tx status in case of critical problems */
 	pr_debug("%s: [CSR5: 0x%08x]\n", __func__, intr_status);
 	show_tx_process_state(intr_status);
 	show_rx_process_state(intr_status);
 #endif

 	if (dir == DMA_DIR_RX)
 		intr_status &= DMA_STATUS_MSK_RX;
 	else if (dir == DMA_DIR_TX)
 		intr_status &= DMA_STATUS_MSK_TX;

 	/* ABNORMAL interrupts */
 	if (unlikely(intr_status & DMA_STATUS_AIS)) {
 		if (unlikely(intr_status & DMA_STATUS_UNF)) {
 			ret = tx_hard_error_bump_tc;
 			x->tx_undeflow_irq++;
 		}
 		if (unlikely(intr_status & DMA_STATUS_TJT))
 			x->tx_jabber_irq++;

 		if (unlikely(intr_status & DMA_STATUS_OVF))
 			x->rx_overflow_irq++;

 		if (unlikely(intr_status & DMA_STATUS_RU))
 			x->rx_buf_unav_irq++;
 		if (unlikely(intr_status & DMA_STATUS_RPS))
 			x->rx_process_stopped_irq++;
 		if (unlikely(intr_status & DMA_STATUS_RWT))
 			x->rx_watchdog_irq++;
 		if (unlikely(intr_status & DMA_STATUS_ETI))
 			x->tx_early_irq++;
 		if (unlikely(intr_status & DMA_STATUS_TPS)) {
 			x->tx_process_stopped_irq++;
 			ret = tx_hard_error;
 		}
 		if (unlikely(intr_status & DMA_STATUS_FBI)) {
 			x->fatal_bus_error_irq++;
 			ret = tx_hard_error;
 		}
 	}
 	/* TX/RX NORMAL interrupts */
 	if (likely(intr_status & DMA_STATUS_NIS)) {
 		x->normal_irq_n++;
 		if (likely(intr_status & DMA_STATUS_RI)) {
 			u32 value = readl(ioaddr + DMA_INTR_ENA);
 			/* to schedule NAPI on real RIE event. */
 			if (likely(value & DMA_INTR_ENA_RIE)) {
 				x->rx_normal_irq_n++;
 				ret |= handle_rx;
 			}
 		}
 		if (likely(intr_status & DMA_STATUS_TI)) {
 			x->tx_normal_irq_n++;
 			ret |= handle_tx;
 		}
 		if (unlikely(intr_status & DMA_STATUS_ERI))
 			x->rx_early_irq++;
 	}
 	/* Optional hardware blocks, interrupts should be disabled */
 	if (unlikely(intr_status &
 		     (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
 		pr_warn("%s: unexpected status %08x\n", __func__, intr_status);

 	/* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
 	writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);

 	return ret;
 }

 void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr)
 {
 	u32 csr6 = readl(ioaddr + DMA_CONTROL);
 	writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);

 	do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
 }

 void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6],
 			 unsigned int high, unsigned int low)
 {
 	unsigned long data;

 	data = (addr[5] << 8) | addr[4];
 	/* For MAC Addr registers we have to set the Address Enable (AE)
 	 * bit that has no effect on the High Reg 0 where the bit 31 (MO)
 	 * is RO.
 	 */
 	writel(data | GMAC_HI_REG_AE, ioaddr + high);
 	data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
 	writel(data, ioaddr + low);
 }
 EXPORT_SYMBOL_GPL(stmmac_set_mac_addr);

 /* Enable disable MAC RX/TX */
 void stmmac_set_mac(void __iomem *ioaddr, bool enable)
 {
 	u32 value = readl(ioaddr + MAC_CTRL_REG);

 	if (enable)
 		value |= MAC_ENABLE_RX | MAC_ENABLE_TX;
 	else
 		value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);

 	writel(value, ioaddr + MAC_CTRL_REG);
 }

 void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
 			 unsigned int high, unsigned int low)
 {
 	unsigned int hi_addr, lo_addr;

 	/* Read the MAC address from the hardware */
 	hi_addr = readl(ioaddr + high);
 	lo_addr = readl(ioaddr + low);

 	/* Extract the MAC address from the high and low words */
 	addr[0] = lo_addr & 0xff;
 	addr[1] = (lo_addr >> 8) & 0xff;
 	addr[2] = (lo_addr >> 16) & 0xff;
 	addr[3] = (lo_addr >> 24) & 0xff;
 	addr[4] = hi_addr & 0xff;
 	addr[5] = (hi_addr >> 8) & 0xff;
 }
 EXPORT_SYMBOL_GPL(stmmac_get_mac_addr);
	// SPDX-License-Identifier: GPL-2.0-only
	/*******************************************************************************
	Copyright (C) 2007-2009 STMicroelectronics Ltd


	Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
	*******************************************************************************/

	#include <linux/io.h>
	#include <linux/iopoll.h>
	#include "common.h"
	#include "dwmac_dma.h"

	#define GMAC_HI_REG_AE 0x80000000

	int dwmac_dma_reset(void __iomem *ioaddr)
	{
	u32 value = readl(ioaddr + DMA_BUS_MODE);

	/* DMA SW reset */
	value \|= DMA_BUS_MODE_SFT_RESET;
	writel(value, ioaddr + DMA_BUS_MODE);

	return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
	!(value & DMA_BUS_MODE_SFT_RESET),
	10000, 200000);
	}

	/* CSR1 enables the transmit DMA to check for new descriptor */
	void dwmac_enable_dma_transmission(void __iomem *ioaddr)
	{
	writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
	}

	void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
	{
	u32 value = readl(ioaddr + DMA_INTR_ENA);

	if (rx)
	value \|= DMA_INTR_DEFAULT_RX;
	if (tx)
	value \|= DMA_INTR_DEFAULT_TX;

	writel(value, ioaddr + DMA_INTR_ENA);
	}

	void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
	{
	u32 value = readl(ioaddr + DMA_INTR_ENA);

	if (rx)
	value &= ~DMA_INTR_DEFAULT_RX;
	if (tx)
	value &= ~DMA_INTR_DEFAULT_TX;

	writel(value, ioaddr + DMA_INTR_ENA);
	}

	void dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan)
	{
	u32 value = readl(ioaddr + DMA_CONTROL);
	value \|= DMA_CONTROL_ST;
	writel(value, ioaddr + DMA_CONTROL);
	}

	void dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan)
	{
	u32 value = readl(ioaddr + DMA_CONTROL);
	value &= ~DMA_CONTROL_ST;
	writel(value, ioaddr + DMA_CONTROL);
	}

	void dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan)
	{
	u32 value = readl(ioaddr + DMA_CONTROL);
	value \|= DMA_CONTROL_SR;
	writel(value, ioaddr + DMA_CONTROL);
	}

	void dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan)
	{
	u32 value = readl(ioaddr + DMA_CONTROL);
	value &= ~DMA_CONTROL_SR;
	writel(value, ioaddr + DMA_CONTROL);
	}

	#ifdef DWMAC_DMA_DEBUG
	static void show_tx_process_state(unsigned int status)
	{
	unsigned int state;
	state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;

	switch (state) {
	case 0:
	pr_debug("- TX (Stopped): Reset or Stop command\n");
	break;
	case 1:
	pr_debug("- TX (Running): Fetching the Tx desc\n");
	break;
	case 2:
	pr_debug("- TX (Running): Waiting for end of tx\n");
	break;
	case 3:
	pr_debug("- TX (Running): Reading the data "
	"and queuing the data into the Tx buf\n");
	break;
	case 6:
	pr_debug("- TX (Suspended): Tx Buff Underflow "
	"or an unavailable Transmit descriptor\n");
	break;
	case 7:
	pr_debug("- TX (Running): Closing Tx descriptor\n");
	break;
	default:
	break;
	}
	}

	static void show_rx_process_state(unsigned int status)
	{
	unsigned int state;
	state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;

	switch (state) {
	case 0:
	pr_debug("- RX (Stopped): Reset or Stop command\n");
	break;
	case 1:
	pr_debug("- RX (Running): Fetching the Rx desc\n");
	break;
	case 2:
	pr_debug("- RX (Running): Checking for end of pkt\n");
	break;
	case 3:
	pr_debug("- RX (Running): Waiting for Rx pkt\n");
	break;
	case 4:
	pr_debug("- RX (Suspended): Unavailable Rx buf\n");
	break;
	case 5:
	pr_debug("- RX (Running): Closing Rx descriptor\n");
	break;
	case 6:
	pr_debug("- RX(Running): Flushing the current frame"
	" from the Rx buf\n");
	break;
	case 7:
	pr_debug("- RX (Running): Queuing the Rx frame"
	" from the Rx buf into memory\n");
	break;
	default:
	break;
	}
	}
	#endif

	int dwmac_dma_interrupt(void __iomem *ioaddr,
	struct stmmac_extra_stats *x, u32 chan, u32 dir)
	{
	int ret = 0;
	/* read the status register (CSR5) */
	u32 intr_status = readl(ioaddr + DMA_STATUS);

	#ifdef DWMAC_DMA_DEBUG
	/* Enable it to monitor DMA rx/tx status in case of critical problems */
	pr_debug("%s: [CSR5: 0x%08x]\n", __func__, intr_status);
	show_tx_process_state(intr_status);
	show_rx_process_state(intr_status);
	#endif

	if (dir == DMA_DIR_RX)
	intr_status &= DMA_STATUS_MSK_RX;
	else if (dir == DMA_DIR_TX)
	intr_status &= DMA_STATUS_MSK_TX;

	/* ABNORMAL interrupts */
	if (unlikely(intr_status & DMA_STATUS_AIS)) {
	if (unlikely(intr_status & DMA_STATUS_UNF)) {
	ret = tx_hard_error_bump_tc;
	x->tx_undeflow_irq++;
	}
	if (unlikely(intr_status & DMA_STATUS_TJT))
	x->tx_jabber_irq++;

	if (unlikely(intr_status & DMA_STATUS_OVF))
	x->rx_overflow_irq++;

	if (unlikely(intr_status & DMA_STATUS_RU))
	x->rx_buf_unav_irq++;
	if (unlikely(intr_status & DMA_STATUS_RPS))
	x->rx_process_stopped_irq++;
	if (unlikely(intr_status & DMA_STATUS_RWT))
	x->rx_watchdog_irq++;
	if (unlikely(intr_status & DMA_STATUS_ETI))
	x->tx_early_irq++;
	if (unlikely(intr_status & DMA_STATUS_TPS)) {
	x->tx_process_stopped_irq++;
	ret = tx_hard_error;
	}
	if (unlikely(intr_status & DMA_STATUS_FBI)) {
	x->fatal_bus_error_irq++;
	ret = tx_hard_error;
	}
	}
	/* TX/RX NORMAL interrupts */
	if (likely(intr_status & DMA_STATUS_NIS)) {
	x->normal_irq_n++;
	if (likely(intr_status & DMA_STATUS_RI)) {
	u32 value = readl(ioaddr + DMA_INTR_ENA);
	/* to schedule NAPI on real RIE event. */
	if (likely(value & DMA_INTR_ENA_RIE)) {
	x->rx_normal_irq_n++;
	ret \|= handle_rx;
	}
	}
	if (likely(intr_status & DMA_STATUS_TI)) {
	x->tx_normal_irq_n++;
	ret \|= handle_tx;
	}
	if (unlikely(intr_status & DMA_STATUS_ERI))
	x->rx_early_irq++;
	}
	/* Optional hardware blocks, interrupts should be disabled */
	if (unlikely(intr_status &
	(DMA_STATUS_GPI \| DMA_STATUS_GMI \| DMA_STATUS_GLI)))
	pr_warn("%s: unexpected status %08x\n", __func__, intr_status);

	/* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
	writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);

	return ret;
	}

	void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr)
	{
	u32 csr6 = readl(ioaddr + DMA_CONTROL);
	writel((csr6 \| DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);

	do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
	}

	void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6],
	unsigned int high, unsigned int low)
	{
	unsigned long data;

	data = (addr[5] << 8) \| addr[4];
	/* For MAC Addr registers we have to set the Address Enable (AE)
	* bit that has no effect on the High Reg 0 where the bit 31 (MO)
	* is RO.
	*/
	writel(data \| GMAC_HI_REG_AE, ioaddr + high);
	data = (addr[3] << 24) \| (addr[2] << 16) \| (addr[1] << 8) \| addr[0];
	writel(data, ioaddr + low);
	}
	EXPORT_SYMBOL_GPL(stmmac_set_mac_addr);

	/* Enable disable MAC RX/TX */
	void stmmac_set_mac(void __iomem *ioaddr, bool enable)
	{
	u32 value = readl(ioaddr + MAC_CTRL_REG);

	if (enable)
	value \|= MAC_ENABLE_RX \| MAC_ENABLE_TX;
	else
	value &= ~(MAC_ENABLE_TX \| MAC_ENABLE_RX);

	writel(value, ioaddr + MAC_CTRL_REG);
	}

	void stmmac_get_mac_addr(void __iomem ioaddr, unsigned char addr,
	unsigned int high, unsigned int low)
	{
	unsigned int hi_addr, lo_addr;

	/* Read the MAC address from the hardware */
	hi_addr = readl(ioaddr + high);
	lo_addr = readl(ioaddr + low);

	/* Extract the MAC address from the high and low words */
	addr[0] = lo_addr & 0xff;
	addr[1] = (lo_addr >> 8) & 0xff;
	addr[2] = (lo_addr >> 16) & 0xff;
	addr[3] = (lo_addr >> 24) & 0xff;
	addr[4] = hi_addr & 0xff;
	addr[5] = (hi_addr >> 8) & 0xff;
	}
	EXPORT_SYMBOL_GPL(stmmac_get_mac_addr);