| /* |
| * vsp1_uds.c -- R-Car VSP1 Up and Down Scaler |
| * |
| * Copyright (C) 2013-2014 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/gfp.h> |
| |
| #include <media/v4l2-subdev.h> |
| |
| #include "vsp1.h" |
| #include "vsp1_dl.h" |
| #include "vsp1_pipe.h" |
| #include "vsp1_uds.h" |
| |
| #define UDS_MIN_SIZE 4U |
| #define UDS_MAX_SIZE 8190U |
| |
| #define UDS_MIN_FACTOR 0x0100 |
| #define UDS_MAX_FACTOR 0xffff |
| |
| /* ----------------------------------------------------------------------------- |
| * Device Access |
| */ |
| |
| static inline void vsp1_uds_write(struct vsp1_uds *uds, struct vsp1_dl_list *dl, |
| u32 reg, u32 data) |
| { |
| vsp1_dl_list_write(dl, reg + uds->entity.index * VI6_UDS_OFFSET, data); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Scaling Computation |
| */ |
| |
| void vsp1_uds_set_alpha(struct vsp1_entity *entity, struct vsp1_dl_list *dl, |
| unsigned int alpha) |
| { |
| struct vsp1_uds *uds = to_uds(&entity->subdev); |
| |
| vsp1_uds_write(uds, dl, VI6_UDS_ALPVAL, |
| alpha << VI6_UDS_ALPVAL_VAL0_SHIFT); |
| } |
| |
| /* |
| * uds_output_size - Return the output size for an input size and scaling ratio |
| * @input: input size in pixels |
| * @ratio: scaling ratio in U4.12 fixed-point format |
| */ |
| static unsigned int uds_output_size(unsigned int input, unsigned int ratio) |
| { |
| if (ratio > 4096) { |
| /* Down-scaling */ |
| unsigned int mp; |
| |
| mp = ratio / 4096; |
| mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4); |
| |
| return (input - 1) / mp * mp * 4096 / ratio + 1; |
| } else { |
| /* Up-scaling */ |
| return (input - 1) * 4096 / ratio + 1; |
| } |
| } |
| |
| /* |
| * uds_output_limits - Return the min and max output sizes for an input size |
| * @input: input size in pixels |
| * @minimum: minimum output size (returned) |
| * @maximum: maximum output size (returned) |
| */ |
| static void uds_output_limits(unsigned int input, |
| unsigned int *minimum, unsigned int *maximum) |
| { |
| *minimum = max(uds_output_size(input, UDS_MAX_FACTOR), UDS_MIN_SIZE); |
| *maximum = min(uds_output_size(input, UDS_MIN_FACTOR), UDS_MAX_SIZE); |
| } |
| |
| /* |
| * uds_passband_width - Return the passband filter width for a scaling ratio |
| * @ratio: scaling ratio in U4.12 fixed-point format |
| */ |
| static unsigned int uds_passband_width(unsigned int ratio) |
| { |
| if (ratio >= 4096) { |
| /* Down-scaling */ |
| unsigned int mp; |
| |
| mp = ratio / 4096; |
| mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4); |
| |
| return 64 * 4096 * mp / ratio; |
| } else { |
| /* Up-scaling */ |
| return 64; |
| } |
| } |
| |
| static unsigned int uds_compute_ratio(unsigned int input, unsigned int output) |
| { |
| /* TODO: This is an approximation that will need to be refined. */ |
| return (input - 1) * 4096 / (output - 1); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Pad Operations |
| */ |
| |
| static int uds_enum_mbus_code(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| static const unsigned int codes[] = { |
| MEDIA_BUS_FMT_ARGB8888_1X32, |
| MEDIA_BUS_FMT_AYUV8_1X32, |
| }; |
| |
| return vsp1_subdev_enum_mbus_code(subdev, cfg, code, codes, |
| ARRAY_SIZE(codes)); |
| } |
| |
| static int uds_enum_frame_size(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| struct vsp1_uds *uds = to_uds(subdev); |
| struct v4l2_subdev_pad_config *config; |
| struct v4l2_mbus_framefmt *format; |
| int ret = 0; |
| |
| config = vsp1_entity_get_pad_config(&uds->entity, cfg, fse->which); |
| if (!config) |
| return -EINVAL; |
| |
| format = vsp1_entity_get_pad_format(&uds->entity, config, |
| UDS_PAD_SINK); |
| |
| mutex_lock(&uds->entity.lock); |
| |
| if (fse->index || fse->code != format->code) { |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| if (fse->pad == UDS_PAD_SINK) { |
| fse->min_width = UDS_MIN_SIZE; |
| fse->max_width = UDS_MAX_SIZE; |
| fse->min_height = UDS_MIN_SIZE; |
| fse->max_height = UDS_MAX_SIZE; |
| } else { |
| uds_output_limits(format->width, &fse->min_width, |
| &fse->max_width); |
| uds_output_limits(format->height, &fse->min_height, |
| &fse->max_height); |
| } |
| |
| done: |
| mutex_unlock(&uds->entity.lock); |
| return ret; |
| } |
| |
| static void uds_try_format(struct vsp1_uds *uds, |
| struct v4l2_subdev_pad_config *config, |
| unsigned int pad, struct v4l2_mbus_framefmt *fmt) |
| { |
| struct v4l2_mbus_framefmt *format; |
| unsigned int minimum; |
| unsigned int maximum; |
| |
| switch (pad) { |
| case UDS_PAD_SINK: |
| /* Default to YUV if the requested format is not supported. */ |
| if (fmt->code != MEDIA_BUS_FMT_ARGB8888_1X32 && |
| fmt->code != MEDIA_BUS_FMT_AYUV8_1X32) |
| fmt->code = MEDIA_BUS_FMT_AYUV8_1X32; |
| |
| fmt->width = clamp(fmt->width, UDS_MIN_SIZE, UDS_MAX_SIZE); |
| fmt->height = clamp(fmt->height, UDS_MIN_SIZE, UDS_MAX_SIZE); |
| break; |
| |
| case UDS_PAD_SOURCE: |
| /* The UDS scales but can't perform format conversion. */ |
| format = vsp1_entity_get_pad_format(&uds->entity, config, |
| UDS_PAD_SINK); |
| fmt->code = format->code; |
| |
| uds_output_limits(format->width, &minimum, &maximum); |
| fmt->width = clamp(fmt->width, minimum, maximum); |
| uds_output_limits(format->height, &minimum, &maximum); |
| fmt->height = clamp(fmt->height, minimum, maximum); |
| break; |
| } |
| |
| fmt->field = V4L2_FIELD_NONE; |
| fmt->colorspace = V4L2_COLORSPACE_SRGB; |
| } |
| |
| static int uds_set_format(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct vsp1_uds *uds = to_uds(subdev); |
| struct v4l2_subdev_pad_config *config; |
| struct v4l2_mbus_framefmt *format; |
| int ret = 0; |
| |
| mutex_lock(&uds->entity.lock); |
| |
| config = vsp1_entity_get_pad_config(&uds->entity, cfg, fmt->which); |
| if (!config) { |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| uds_try_format(uds, config, fmt->pad, &fmt->format); |
| |
| format = vsp1_entity_get_pad_format(&uds->entity, config, fmt->pad); |
| *format = fmt->format; |
| |
| if (fmt->pad == UDS_PAD_SINK) { |
| /* Propagate the format to the source pad. */ |
| format = vsp1_entity_get_pad_format(&uds->entity, config, |
| UDS_PAD_SOURCE); |
| *format = fmt->format; |
| |
| uds_try_format(uds, config, UDS_PAD_SOURCE, format); |
| } |
| |
| done: |
| mutex_unlock(&uds->entity.lock); |
| return ret; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Operations |
| */ |
| |
| static const struct v4l2_subdev_pad_ops uds_pad_ops = { |
| .init_cfg = vsp1_entity_init_cfg, |
| .enum_mbus_code = uds_enum_mbus_code, |
| .enum_frame_size = uds_enum_frame_size, |
| .get_fmt = vsp1_subdev_get_pad_format, |
| .set_fmt = uds_set_format, |
| }; |
| |
| static const struct v4l2_subdev_ops uds_ops = { |
| .pad = &uds_pad_ops, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * VSP1 Entity Operations |
| */ |
| |
| static void uds_configure(struct vsp1_entity *entity, |
| struct vsp1_pipeline *pipe, |
| struct vsp1_dl_list *dl, |
| enum vsp1_entity_params params) |
| { |
| struct vsp1_uds *uds = to_uds(&entity->subdev); |
| const struct v4l2_mbus_framefmt *output; |
| const struct v4l2_mbus_framefmt *input; |
| unsigned int hscale; |
| unsigned int vscale; |
| bool multitap; |
| |
| input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, |
| UDS_PAD_SINK); |
| output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, |
| UDS_PAD_SOURCE); |
| |
| if (params == VSP1_ENTITY_PARAMS_PARTITION) { |
| struct vsp1_partition *partition = pipe->partition; |
| |
| /* Input size clipping */ |
| vsp1_uds_write(uds, dl, VI6_UDS_HSZCLIP, VI6_UDS_HSZCLIP_HCEN | |
| (0 << VI6_UDS_HSZCLIP_HCL_OFST_SHIFT) | |
| (partition->uds_sink.width |
| << VI6_UDS_HSZCLIP_HCL_SIZE_SHIFT)); |
| |
| /* Output size clipping */ |
| vsp1_uds_write(uds, dl, VI6_UDS_CLIP_SIZE, |
| (partition->uds_source.width |
| << VI6_UDS_CLIP_SIZE_HSIZE_SHIFT) | |
| (output->height |
| << VI6_UDS_CLIP_SIZE_VSIZE_SHIFT)); |
| return; |
| } |
| |
| if (params != VSP1_ENTITY_PARAMS_INIT) |
| return; |
| |
| hscale = uds_compute_ratio(input->width, output->width); |
| vscale = uds_compute_ratio(input->height, output->height); |
| |
| dev_dbg(uds->entity.vsp1->dev, "hscale %u vscale %u\n", hscale, vscale); |
| |
| /* |
| * Multi-tap scaling can't be enabled along with alpha scaling when |
| * scaling down with a factor lower than or equal to 1/2 in either |
| * direction. |
| */ |
| if (uds->scale_alpha && (hscale >= 8192 || vscale >= 8192)) |
| multitap = false; |
| else |
| multitap = true; |
| |
| vsp1_uds_write(uds, dl, VI6_UDS_CTRL, |
| (uds->scale_alpha ? VI6_UDS_CTRL_AON : 0) | |
| (multitap ? VI6_UDS_CTRL_BC : 0)); |
| |
| vsp1_uds_write(uds, dl, VI6_UDS_PASS_BWIDTH, |
| (uds_passband_width(hscale) |
| << VI6_UDS_PASS_BWIDTH_H_SHIFT) | |
| (uds_passband_width(vscale) |
| << VI6_UDS_PASS_BWIDTH_V_SHIFT)); |
| |
| /* Set the scaling ratios. */ |
| vsp1_uds_write(uds, dl, VI6_UDS_SCALE, |
| (hscale << VI6_UDS_SCALE_HFRAC_SHIFT) | |
| (vscale << VI6_UDS_SCALE_VFRAC_SHIFT)); |
| } |
| |
| static unsigned int uds_max_width(struct vsp1_entity *entity, |
| struct vsp1_pipeline *pipe) |
| { |
| struct vsp1_uds *uds = to_uds(&entity->subdev); |
| const struct v4l2_mbus_framefmt *output; |
| const struct v4l2_mbus_framefmt *input; |
| unsigned int hscale; |
| |
| input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, |
| UDS_PAD_SINK); |
| output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, |
| UDS_PAD_SOURCE); |
| hscale = output->width / input->width; |
| |
| if (hscale <= 2) |
| return 256; |
| else if (hscale <= 4) |
| return 512; |
| else if (hscale <= 8) |
| return 1024; |
| else |
| return 2048; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Partition Algorithm Support |
| */ |
| |
| static void uds_partition(struct vsp1_entity *entity, |
| struct vsp1_pipeline *pipe, |
| struct vsp1_partition *partition, |
| unsigned int partition_idx, |
| struct vsp1_partition_window *window) |
| { |
| struct vsp1_uds *uds = to_uds(&entity->subdev); |
| const struct v4l2_mbus_framefmt *output; |
| const struct v4l2_mbus_framefmt *input; |
| |
| /* Initialise the partition state */ |
| partition->uds_sink = *window; |
| partition->uds_source = *window; |
| |
| input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, |
| UDS_PAD_SINK); |
| output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, |
| UDS_PAD_SOURCE); |
| |
| partition->uds_sink.width = window->width * input->width |
| / output->width; |
| partition->uds_sink.left = window->left * input->width |
| / output->width; |
| |
| *window = partition->uds_sink; |
| } |
| |
| static const struct vsp1_entity_operations uds_entity_ops = { |
| .configure = uds_configure, |
| .max_width = uds_max_width, |
| .partition = uds_partition, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Initialization and Cleanup |
| */ |
| |
| struct vsp1_uds *vsp1_uds_create(struct vsp1_device *vsp1, unsigned int index) |
| { |
| struct vsp1_uds *uds; |
| char name[6]; |
| int ret; |
| |
| uds = devm_kzalloc(vsp1->dev, sizeof(*uds), GFP_KERNEL); |
| if (uds == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| uds->entity.ops = &uds_entity_ops; |
| uds->entity.type = VSP1_ENTITY_UDS; |
| uds->entity.index = index; |
| |
| sprintf(name, "uds.%u", index); |
| ret = vsp1_entity_init(vsp1, &uds->entity, name, 2, &uds_ops, |
| MEDIA_ENT_F_PROC_VIDEO_SCALER); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| return uds; |
| } |