| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * IIO ADC driver for NXP LPC18xx ADC |
| * |
| * Copyright (C) 2016 Joachim Eastwood <manabian@gmail.com> |
| * |
| * UNSUPPORTED hardware features: |
| * - Hardware triggers |
| * - Burst mode |
| * - Interrupts |
| * - DMA |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/driver.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| /* LPC18XX ADC registers and bits */ |
| #define LPC18XX_ADC_CR 0x000 |
| #define LPC18XX_ADC_CR_CLKDIV_SHIFT 8 |
| #define LPC18XX_ADC_CR_PDN BIT(21) |
| #define LPC18XX_ADC_CR_START_NOW (0x1 << 24) |
| #define LPC18XX_ADC_GDR 0x004 |
| |
| /* Data register bits */ |
| #define LPC18XX_ADC_SAMPLE_SHIFT 6 |
| #define LPC18XX_ADC_SAMPLE_MASK 0x3ff |
| #define LPC18XX_ADC_CONV_DONE BIT(31) |
| |
| /* Clock should be 4.5 MHz or less */ |
| #define LPC18XX_ADC_CLK_TARGET 4500000 |
| |
| struct lpc18xx_adc { |
| struct regulator *vref; |
| void __iomem *base; |
| struct device *dev; |
| struct mutex lock; |
| struct clk *clk; |
| u32 cr_reg; |
| }; |
| |
| #define LPC18XX_ADC_CHAN(_idx) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = _idx, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| } |
| |
| static const struct iio_chan_spec lpc18xx_adc_iio_channels[] = { |
| LPC18XX_ADC_CHAN(0), |
| LPC18XX_ADC_CHAN(1), |
| LPC18XX_ADC_CHAN(2), |
| LPC18XX_ADC_CHAN(3), |
| LPC18XX_ADC_CHAN(4), |
| LPC18XX_ADC_CHAN(5), |
| LPC18XX_ADC_CHAN(6), |
| LPC18XX_ADC_CHAN(7), |
| }; |
| |
| static int lpc18xx_adc_read_chan(struct lpc18xx_adc *adc, unsigned int ch) |
| { |
| int ret; |
| u32 reg; |
| |
| reg = adc->cr_reg | BIT(ch) | LPC18XX_ADC_CR_START_NOW; |
| writel(reg, adc->base + LPC18XX_ADC_CR); |
| |
| ret = readl_poll_timeout(adc->base + LPC18XX_ADC_GDR, reg, |
| reg & LPC18XX_ADC_CONV_DONE, 3, 9); |
| if (ret) { |
| dev_warn(adc->dev, "adc read timed out\n"); |
| return ret; |
| } |
| |
| return (reg >> LPC18XX_ADC_SAMPLE_SHIFT) & LPC18XX_ADC_SAMPLE_MASK; |
| } |
| |
| static int lpc18xx_adc_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct lpc18xx_adc *adc = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| mutex_lock(&adc->lock); |
| *val = lpc18xx_adc_read_chan(adc, chan->channel); |
| mutex_unlock(&adc->lock); |
| if (*val < 0) |
| return *val; |
| |
| return IIO_VAL_INT; |
| |
| case IIO_CHAN_INFO_SCALE: |
| *val = regulator_get_voltage(adc->vref) / 1000; |
| *val2 = 10; |
| |
| return IIO_VAL_FRACTIONAL_LOG2; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const struct iio_info lpc18xx_adc_info = { |
| .read_raw = lpc18xx_adc_read_raw, |
| }; |
| |
| static int lpc18xx_adc_probe(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev; |
| struct lpc18xx_adc *adc; |
| struct resource *res; |
| unsigned int clkdiv; |
| unsigned long rate; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, indio_dev); |
| adc = iio_priv(indio_dev); |
| adc->dev = &pdev->dev; |
| mutex_init(&adc->lock); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| adc->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(adc->base)) |
| return PTR_ERR(adc->base); |
| |
| adc->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(adc->clk)) { |
| dev_err(&pdev->dev, "error getting clock\n"); |
| return PTR_ERR(adc->clk); |
| } |
| |
| rate = clk_get_rate(adc->clk); |
| clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET); |
| |
| adc->vref = devm_regulator_get(&pdev->dev, "vref"); |
| if (IS_ERR(adc->vref)) { |
| dev_err(&pdev->dev, "error getting regulator\n"); |
| return PTR_ERR(adc->vref); |
| } |
| |
| indio_dev->name = dev_name(&pdev->dev); |
| indio_dev->dev.parent = &pdev->dev; |
| indio_dev->info = &lpc18xx_adc_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = lpc18xx_adc_iio_channels; |
| indio_dev->num_channels = ARRAY_SIZE(lpc18xx_adc_iio_channels); |
| |
| ret = regulator_enable(adc->vref); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to enable regulator\n"); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(adc->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to enable clock\n"); |
| goto dis_reg; |
| } |
| |
| adc->cr_reg = (clkdiv << LPC18XX_ADC_CR_CLKDIV_SHIFT) | |
| LPC18XX_ADC_CR_PDN; |
| writel(adc->cr_reg, adc->base + LPC18XX_ADC_CR); |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to register device\n"); |
| goto dis_clk; |
| } |
| |
| return 0; |
| |
| dis_clk: |
| writel(0, adc->base + LPC18XX_ADC_CR); |
| clk_disable_unprepare(adc->clk); |
| dis_reg: |
| regulator_disable(adc->vref); |
| return ret; |
| } |
| |
| static int lpc18xx_adc_remove(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| struct lpc18xx_adc *adc = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| |
| writel(0, adc->base + LPC18XX_ADC_CR); |
| clk_disable_unprepare(adc->clk); |
| regulator_disable(adc->vref); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id lpc18xx_adc_match[] = { |
| { .compatible = "nxp,lpc1850-adc" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, lpc18xx_adc_match); |
| |
| static struct platform_driver lpc18xx_adc_driver = { |
| .probe = lpc18xx_adc_probe, |
| .remove = lpc18xx_adc_remove, |
| .driver = { |
| .name = "lpc18xx-adc", |
| .of_match_table = lpc18xx_adc_match, |
| }, |
| }; |
| module_platform_driver(lpc18xx_adc_driver); |
| |
| MODULE_DESCRIPTION("LPC18xx ADC driver"); |
| MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); |
| MODULE_LICENSE("GPL v2"); |