| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2019 Nuvoton Technology corporation. |
| |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/io.h> |
| #include <linux/iio/iio.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/spinlock.h> |
| #include <linux/uaccess.h> |
| |
| struct npcm_adc { |
| bool int_status; |
| u32 adc_sample_hz; |
| struct device *dev; |
| void __iomem *regs; |
| struct clk *adc_clk; |
| wait_queue_head_t wq; |
| struct regulator *vref; |
| struct regmap *rst_regmap; |
| }; |
| |
| /* NPCM7xx reset module */ |
| #define NPCM7XX_IPSRST1_OFFSET 0x020 |
| #define NPCM7XX_IPSRST1_ADC_RST BIT(27) |
| |
| /* ADC registers */ |
| #define NPCM_ADCCON 0x00 |
| #define NPCM_ADCDATA 0x04 |
| |
| /* ADCCON Register Bits */ |
| #define NPCM_ADCCON_ADC_INT_EN BIT(21) |
| #define NPCM_ADCCON_REFSEL BIT(19) |
| #define NPCM_ADCCON_ADC_INT_ST BIT(18) |
| #define NPCM_ADCCON_ADC_EN BIT(17) |
| #define NPCM_ADCCON_ADC_RST BIT(16) |
| #define NPCM_ADCCON_ADC_CONV BIT(13) |
| |
| #define NPCM_ADCCON_CH_MASK GENMASK(27, 24) |
| #define NPCM_ADCCON_CH(x) ((x) << 24) |
| #define NPCM_ADCCON_DIV_SHIFT 1 |
| #define NPCM_ADCCON_DIV_MASK GENMASK(8, 1) |
| #define NPCM_ADC_DATA_MASK(x) ((x) & GENMASK(9, 0)) |
| |
| #define NPCM_ADC_ENABLE (NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN) |
| |
| /* ADC General Definition */ |
| #define NPCM_RESOLUTION_BITS 10 |
| #define NPCM_INT_VREF_MV 2000 |
| |
| #define NPCM_ADC_CHAN(ch) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = ch, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| } |
| |
| static const struct iio_chan_spec npcm_adc_iio_channels[] = { |
| NPCM_ADC_CHAN(0), |
| NPCM_ADC_CHAN(1), |
| NPCM_ADC_CHAN(2), |
| NPCM_ADC_CHAN(3), |
| NPCM_ADC_CHAN(4), |
| NPCM_ADC_CHAN(5), |
| NPCM_ADC_CHAN(6), |
| NPCM_ADC_CHAN(7), |
| }; |
| |
| static irqreturn_t npcm_adc_isr(int irq, void *data) |
| { |
| u32 regtemp; |
| struct iio_dev *indio_dev = data; |
| struct npcm_adc *info = iio_priv(indio_dev); |
| |
| regtemp = ioread32(info->regs + NPCM_ADCCON); |
| if (regtemp & NPCM_ADCCON_ADC_INT_ST) { |
| iowrite32(regtemp, info->regs + NPCM_ADCCON); |
| wake_up_interruptible(&info->wq); |
| info->int_status = true; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel) |
| { |
| int ret; |
| u32 regtemp; |
| |
| /* Select ADC channel */ |
| regtemp = ioread32(info->regs + NPCM_ADCCON); |
| regtemp &= ~NPCM_ADCCON_CH_MASK; |
| info->int_status = false; |
| iowrite32(regtemp | NPCM_ADCCON_CH(channel) | |
| NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON); |
| |
| ret = wait_event_interruptible_timeout(info->wq, info->int_status, |
| msecs_to_jiffies(10)); |
| if (ret == 0) { |
| regtemp = ioread32(info->regs + NPCM_ADCCON); |
| if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) { |
| /* if conversion failed - reset ADC module */ |
| regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, |
| NPCM7XX_IPSRST1_ADC_RST); |
| msleep(100); |
| regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, |
| 0x0); |
| msleep(100); |
| |
| /* Enable ADC and start conversion module */ |
| iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV, |
| info->regs + NPCM_ADCCON); |
| dev_err(info->dev, "RESET ADC Complete\n"); |
| } |
| return -ETIMEDOUT; |
| } |
| if (ret < 0) |
| return ret; |
| |
| *val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA)); |
| |
| return 0; |
| } |
| |
| static int npcm_adc_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| int ret; |
| int vref_uv; |
| struct npcm_adc *info = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| mutex_lock(&indio_dev->mlock); |
| ret = npcm_adc_read(info, val, chan->channel); |
| mutex_unlock(&indio_dev->mlock); |
| if (ret) { |
| dev_err(info->dev, "NPCM ADC read failed\n"); |
| return ret; |
| } |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| if (!IS_ERR(info->vref)) { |
| vref_uv = regulator_get_voltage(info->vref); |
| *val = vref_uv / 1000; |
| } else { |
| *val = NPCM_INT_VREF_MV; |
| } |
| *val2 = NPCM_RESOLUTION_BITS; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *val = info->adc_sample_hz; |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct iio_info npcm_adc_iio_info = { |
| .read_raw = &npcm_adc_read_raw, |
| }; |
| |
| static const struct of_device_id npcm_adc_match[] = { |
| { .compatible = "nuvoton,npcm750-adc", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, npcm_adc_match); |
| |
| static int npcm_adc_probe(struct platform_device *pdev) |
| { |
| int ret; |
| int irq; |
| u32 div; |
| u32 reg_con; |
| struct resource *res; |
| struct npcm_adc *info; |
| struct iio_dev *indio_dev; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = pdev->dev.of_node; |
| |
| indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); |
| if (!indio_dev) |
| return -ENOMEM; |
| info = iio_priv(indio_dev); |
| |
| info->dev = &pdev->dev; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| info->regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(info->regs)) |
| return PTR_ERR(info->regs); |
| |
| info->adc_clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(info->adc_clk)) { |
| dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); |
| return PTR_ERR(info->adc_clk); |
| } |
| |
| /* calculate ADC clock sample rate */ |
| reg_con = ioread32(info->regs + NPCM_ADCCON); |
| div = reg_con & NPCM_ADCCON_DIV_MASK; |
| div = div >> NPCM_ADCCON_DIV_SHIFT; |
| info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2); |
| |
| if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) { |
| info->rst_regmap = syscon_regmap_lookup_by_compatible |
| ("nuvoton,npcm750-rst"); |
| if (IS_ERR(info->rst_regmap)) { |
| dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n"); |
| ret = PTR_ERR(info->rst_regmap); |
| goto err_disable_clk; |
| } |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq <= 0) { |
| dev_err(dev, "failed getting interrupt resource\n"); |
| ret = -EINVAL; |
| goto err_disable_clk; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0, |
| "NPCM_ADC", indio_dev); |
| if (ret < 0) { |
| dev_err(dev, "failed requesting interrupt\n"); |
| goto err_disable_clk; |
| } |
| |
| reg_con = ioread32(info->regs + NPCM_ADCCON); |
| info->vref = devm_regulator_get_optional(&pdev->dev, "vref"); |
| if (!IS_ERR(info->vref)) { |
| ret = regulator_enable(info->vref); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't enable ADC reference voltage\n"); |
| goto err_disable_clk; |
| } |
| |
| iowrite32(reg_con & ~NPCM_ADCCON_REFSEL, |
| info->regs + NPCM_ADCCON); |
| } else { |
| /* |
| * Any error which is not ENODEV indicates the regulator |
| * has been specified and so is a failure case. |
| */ |
| if (PTR_ERR(info->vref) != -ENODEV) { |
| ret = PTR_ERR(info->vref); |
| goto err_disable_clk; |
| } |
| |
| /* Use internal reference */ |
| iowrite32(reg_con | NPCM_ADCCON_REFSEL, |
| info->regs + NPCM_ADCCON); |
| } |
| |
| init_waitqueue_head(&info->wq); |
| |
| reg_con = ioread32(info->regs + NPCM_ADCCON); |
| reg_con |= NPCM_ADC_ENABLE; |
| |
| /* Enable the ADC Module */ |
| iowrite32(reg_con, info->regs + NPCM_ADCCON); |
| |
| /* Start ADC conversion */ |
| iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON); |
| |
| platform_set_drvdata(pdev, indio_dev); |
| indio_dev->name = dev_name(&pdev->dev); |
| indio_dev->dev.parent = &pdev->dev; |
| indio_dev->info = &npcm_adc_iio_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = npcm_adc_iio_channels; |
| indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels); |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) { |
| dev_err(&pdev->dev, "Couldn't register the device.\n"); |
| goto err_iio_register; |
| } |
| |
| pr_info("NPCM ADC driver probed\n"); |
| |
| return 0; |
| |
| err_iio_register: |
| iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); |
| if (!IS_ERR(info->vref)) |
| regulator_disable(info->vref); |
| err_disable_clk: |
| clk_disable_unprepare(info->adc_clk); |
| |
| return ret; |
| } |
| |
| static int npcm_adc_remove(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| struct npcm_adc *info = iio_priv(indio_dev); |
| u32 regtemp; |
| |
| iio_device_unregister(indio_dev); |
| |
| regtemp = ioread32(info->regs + NPCM_ADCCON); |
| iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); |
| if (!IS_ERR(info->vref)) |
| regulator_disable(info->vref); |
| clk_disable_unprepare(info->adc_clk); |
| |
| return 0; |
| } |
| |
| static struct platform_driver npcm_adc_driver = { |
| .probe = npcm_adc_probe, |
| .remove = npcm_adc_remove, |
| .driver = { |
| .name = "npcm_adc", |
| .of_match_table = npcm_adc_match, |
| }, |
| }; |
| |
| module_platform_driver(npcm_adc_driver); |
| |
| MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver"); |
| MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>"); |
| MODULE_LICENSE("GPL v2"); |