| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/net/renesas,ether.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Renesas Electronics SH EtherMAC |
| |
| allOf: |
| - $ref: ethernet-controller.yaml# |
| |
| maintainers: |
| - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
| |
| properties: |
| compatible: |
| oneOf: |
| - items: |
| - enum: |
| - renesas,gether-r8a7740 # device is a part of R8A7740 SoC |
| - renesas,gether-r8a77980 # device is a part of R8A77980 SoC |
| - renesas,ether-r7s72100 # device is a part of R7S72100 SoC |
| - renesas,ether-r7s9210 # device is a part of R7S9210 SoC |
| - items: |
| - enum: |
| - renesas,ether-r8a7778 # device is a part of R8A7778 SoC |
| - renesas,ether-r8a7779 # device is a part of R8A7779 SoC |
| - enum: |
| - renesas,rcar-gen1-ether # a generic R-Car Gen1 device |
| - items: |
| - enum: |
| - renesas,ether-r8a7742 # device is a part of R8A7742 SoC |
| - renesas,ether-r8a7743 # device is a part of R8A7743 SoC |
| - renesas,ether-r8a7745 # device is a part of R8A7745 SoC |
| - renesas,ether-r8a7790 # device is a part of R8A7790 SoC |
| - renesas,ether-r8a7791 # device is a part of R8A7791 SoC |
| - renesas,ether-r8a7793 # device is a part of R8A7793 SoC |
| - renesas,ether-r8a7794 # device is a part of R8A7794 SoC |
| - enum: |
| - renesas,rcar-gen2-ether # a generic R-Car Gen2 or RZ/G1 device |
| |
| reg: |
| items: |
| - description: E-DMAC/feLic registers |
| - description: TSU registers |
| minItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| '#address-cells': |
| description: number of address cells for the MDIO bus |
| const: 1 |
| |
| '#size-cells': |
| description: number of size cells on the MDIO bus |
| const: 0 |
| |
| clocks: |
| maxItems: 1 |
| |
| power-domains: |
| maxItems: 1 |
| |
| resets: |
| maxItems: 1 |
| |
| phy-mode: true |
| |
| phy-handle: true |
| |
| renesas,no-ether-link: |
| type: boolean |
| description: |
| specify when a board does not provide a proper Ether LINK signal |
| |
| renesas,ether-link-active-low: |
| type: boolean |
| description: |
| specify when the Ether LINK signal is active-low instead of normal |
| active-high |
| |
| patternProperties: |
| "^ethernet-phy@[0-9a-f]$": |
| type: object |
| $ref: ethernet-phy.yaml# |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - phy-mode |
| - phy-handle |
| - '#address-cells' |
| - '#size-cells' |
| - clocks |
| |
| additionalProperties: false |
| |
| examples: |
| # Lager board |
| - | |
| #include <dt-bindings/clock/r8a7790-clock.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| ethernet@ee700000 { |
| compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether"; |
| reg = <0xee700000 0x400>; |
| interrupt-parent = <&gic>; |
| interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp8_clks R8A7790_CLK_ETHER>; |
| phy-mode = "rmii"; |
| phy-handle = <&phy1>; |
| renesas,ether-link-active-low; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| phy1: ethernet-phy@1 { |
| reg = <1>; |
| interrupt-parent = <&irqc0>; |
| interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |