blob: e75620e41ba4c6d434d095ee043ea7925f2744cb [file] [log] [blame]
/* include/asm-generic/tlb.h
*
* Generic TLB shootdown code
*
* Copyright 2001 Red Hat, Inc.
* Based on code from mm/memory.c Copyright Linus Torvalds and others.
*
* Copyright 2011 Red Hat, Inc., Peter Zijlstra
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_GENERIC__TLB_H
#define _ASM_GENERIC__TLB_H
#include <linux/mmu_notifier.h>
#include <linux/swap.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_MMU
/*
* Generic MMU-gather implementation.
*
* The mmu_gather data structure is used by the mm code to implement the
* correct and efficient ordering of freeing pages and TLB invalidations.
*
* This correct ordering is:
*
* 1) unhook page
* 2) TLB invalidate page
* 3) free page
*
* That is, we must never free a page before we have ensured there are no live
* translations left to it. Otherwise it might be possible to observe (or
* worse, change) the page content after it has been reused.
*
* The mmu_gather API consists of:
*
* - tlb_gather_mmu() / tlb_finish_mmu(); start and finish a mmu_gather
*
* Finish in particular will issue a (final) TLB invalidate and free
* all (remaining) queued pages.
*
* - tlb_start_vma() / tlb_end_vma(); marks the start / end of a VMA
*
* Defaults to flushing at tlb_end_vma() to reset the range; helps when
* there's large holes between the VMAs.
*
* - tlb_remove_page() / __tlb_remove_page()
* - tlb_remove_page_size() / __tlb_remove_page_size()
*
* __tlb_remove_page_size() is the basic primitive that queues a page for
* freeing. __tlb_remove_page() assumes PAGE_SIZE. Both will return a
* boolean indicating if the queue is (now) full and a call to
* tlb_flush_mmu() is required.
*
* tlb_remove_page() and tlb_remove_page_size() imply the call to
* tlb_flush_mmu() when required and has no return value.
*
* - tlb_change_page_size()
*
* call before __tlb_remove_page*() to set the current page-size; implies a
* possible tlb_flush_mmu() call.
*
* - tlb_flush_mmu() / tlb_flush_mmu_tlbonly() / tlb_flush_mmu_free()
*
* tlb_flush_mmu_tlbonly() - does the TLB invalidate (and resets
* related state, like the range)
*
* tlb_flush_mmu_free() - frees the queued pages; make absolutely
* sure no additional tlb_remove_page()
* calls happen between _tlbonly() and this.
*
* tlb_flush_mmu() - the above two calls.
*
* - mmu_gather::fullmm
*
* A flag set by tlb_gather_mmu() to indicate we're going to free
* the entire mm; this allows a number of optimizations.
*
* - We can ignore tlb_{start,end}_vma(); because we don't
* care about ranges. Everything will be shot down.
*
* - (RISC) architectures that use ASIDs can cycle to a new ASID
* and delay the invalidation until ASID space runs out.
*
* - mmu_gather::need_flush_all
*
* A flag that can be set by the arch code if it wants to force
* flush the entire TLB irrespective of the range. For instance
* x86-PAE needs this when changing top-level entries.
*
* And requires the architecture to provide and implement tlb_flush().
*
* tlb_flush() may, in addition to the above mentioned mmu_gather fields, make
* use of:
*
* - mmu_gather::start / mmu_gather::end
*
* which provides the range that needs to be flushed to cover the pages to
* be freed.
*
* - mmu_gather::freed_tables
*
* set when we freed page table pages
*
* - tlb_get_unmap_shift() / tlb_get_unmap_size()
*
* returns the smallest TLB entry size unmapped in this range
*
* Additionally there are a few opt-in features:
*
* HAVE_MMU_GATHER_PAGE_SIZE
*
* This ensures we call tlb_flush() every time tlb_change_page_size() actually
* changes the size and provides mmu_gather::page_size to tlb_flush().
*
* HAVE_RCU_TABLE_FREE
*
* This provides tlb_remove_table(), to be used instead of tlb_remove_page()
* for page directores (__p*_free_tlb()). This provides separate freeing of
* the page-table pages themselves in a semi-RCU fashion (see comment below).
* Useful if your architecture doesn't use IPIs for remote TLB invalidates
* and therefore doesn't naturally serialize with software page-table walkers.
*
* When used, an architecture is expected to provide __tlb_remove_table()
* which does the actual freeing of these pages.
*
* HAVE_RCU_TABLE_INVALIDATE
*
* This makes HAVE_RCU_TABLE_FREE call tlb_flush_mmu_tlbonly() before freeing
* the page-table pages. Required if you use HAVE_RCU_TABLE_FREE and your
* architecture uses the Linux page-tables natively.
*
*/
#define HAVE_GENERIC_MMU_GATHER
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
/*
* Semi RCU freeing of the page directories.
*
* This is needed by some architectures to implement software pagetable walkers.
*
* gup_fast() and other software pagetable walkers do a lockless page-table
* walk and therefore needs some synchronization with the freeing of the page
* directories. The chosen means to accomplish that is by disabling IRQs over
* the walk.
*
* Architectures that use IPIs to flush TLBs will then automagically DTRT,
* since we unlink the page, flush TLBs, free the page. Since the disabling of
* IRQs delays the completion of the TLB flush we can never observe an already
* freed page.
*
* Architectures that do not have this (PPC) need to delay the freeing by some
* other means, this is that means.
*
* What we do is batch the freed directory pages (tables) and RCU free them.
* We use the sched RCU variant, as that guarantees that IRQ/preempt disabling
* holds off grace periods.
*
* However, in order to batch these pages we need to allocate storage, this
* allocation is deep inside the MM code and can thus easily fail on memory
* pressure. To guarantee progress we fall back to single table freeing, see
* the implementation of tlb_remove_table_one().
*
*/
struct mmu_table_batch {
struct rcu_head rcu;
unsigned int nr;
void *tables[0];
};
#define MAX_TABLE_BATCH \
((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *))
extern void tlb_table_flush(struct mmu_gather *tlb);
extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
#endif
/*
* If we can't allocate a page to make a big batch of page pointers
* to work on, then just handle a few from the on-stack structure.
*/
#define MMU_GATHER_BUNDLE 8
struct mmu_gather_batch {
struct mmu_gather_batch *next;
unsigned int nr;
unsigned int max;
struct page *pages[0];
};
#define MAX_GATHER_BATCH \
((PAGE_SIZE - sizeof(struct mmu_gather_batch)) / sizeof(void *))
/*
* Limit the maximum number of mmu_gather batches to reduce a risk of soft
* lockups for non-preemptible kernels on huge machines when a lot of memory
* is zapped during unmapping.
* 10K pages freed at once should be safe even without a preemption point.
*/
#define MAX_GATHER_BATCH_COUNT (10000UL/MAX_GATHER_BATCH)
/*
* struct mmu_gather is an opaque type used by the mm code for passing around
* any data needed by arch specific code for tlb_remove_page.
*/
struct mmu_gather {
struct mm_struct *mm;
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
struct mmu_table_batch *batch;
#endif
unsigned long start;
unsigned long end;
/*
* we are in the middle of an operation to clear
* a full mm and can make some optimizations
*/
unsigned int fullmm : 1;
/*
* we have performed an operation which
* requires a complete flush of the tlb
*/
unsigned int need_flush_all : 1;
/*
* we have removed page directories
*/
unsigned int freed_tables : 1;
/*
* at which levels have we cleared entries?
*/
unsigned int cleared_ptes : 1;
unsigned int cleared_pmds : 1;
unsigned int cleared_puds : 1;
unsigned int cleared_p4ds : 1;
unsigned int batch_count;
struct mmu_gather_batch *active;
struct mmu_gather_batch local;
struct page *__pages[MMU_GATHER_BUNDLE];
#ifdef CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
unsigned int page_size;
#endif
};
void arch_tlb_gather_mmu(struct mmu_gather *tlb,
struct mm_struct *mm, unsigned long start, unsigned long end);
void tlb_flush_mmu(struct mmu_gather *tlb);
void arch_tlb_finish_mmu(struct mmu_gather *tlb,
unsigned long start, unsigned long end, bool force);
void tlb_flush_mmu_free(struct mmu_gather *tlb);
extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page,
int page_size);
static inline void __tlb_adjust_range(struct mmu_gather *tlb,
unsigned long address,
unsigned int range_size)
{
tlb->start = min(tlb->start, address);
tlb->end = max(tlb->end, address + range_size);
}
static inline void __tlb_reset_range(struct mmu_gather *tlb)
{
if (tlb->fullmm) {
tlb->start = tlb->end = ~0;
} else {
tlb->start = TASK_SIZE;
tlb->end = 0;
}
tlb->freed_tables = 0;
tlb->cleared_ptes = 0;
tlb->cleared_pmds = 0;
tlb->cleared_puds = 0;
tlb->cleared_p4ds = 0;
}
static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
{
if (!tlb->end)
return;
tlb_flush(tlb);
mmu_notifier_invalidate_range(tlb->mm, tlb->start, tlb->end);
__tlb_reset_range(tlb);
}
static inline void tlb_remove_page_size(struct mmu_gather *tlb,
struct page *page, int page_size)
{
if (__tlb_remove_page_size(tlb, page, page_size))
tlb_flush_mmu(tlb);
}
static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
{
return __tlb_remove_page_size(tlb, page, PAGE_SIZE);
}
/* tlb_remove_page
* Similar to __tlb_remove_page but will call tlb_flush_mmu() itself when
* required.
*/
static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
{
return tlb_remove_page_size(tlb, page, PAGE_SIZE);
}
static inline void tlb_change_page_size(struct mmu_gather *tlb,
unsigned int page_size)
{
#ifdef CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
if (tlb->page_size && tlb->page_size != page_size) {
if (!tlb->fullmm)
tlb_flush_mmu(tlb);
}
tlb->page_size = page_size;
#endif
}
static inline unsigned long tlb_get_unmap_shift(struct mmu_gather *tlb)
{
if (tlb->cleared_ptes)
return PAGE_SHIFT;
if (tlb->cleared_pmds)
return PMD_SHIFT;
if (tlb->cleared_puds)
return PUD_SHIFT;
if (tlb->cleared_p4ds)
return P4D_SHIFT;
return PAGE_SHIFT;
}
static inline unsigned long tlb_get_unmap_size(struct mmu_gather *tlb)
{
return 1UL << tlb_get_unmap_shift(tlb);
}
/*
* In the case of tlb vma handling, we can optimise these away in the
* case where we're doing a full MM flush. When we're doing a munmap,
* the vmas are adjusted to only cover the region to be torn down.
*/
#ifndef tlb_start_vma
#define tlb_start_vma(tlb, vma) do { } while (0)
#endif
#define __tlb_end_vma(tlb, vma) \
do { \
if (!tlb->fullmm) \
tlb_flush_mmu_tlbonly(tlb); \
} while (0)
#ifndef tlb_end_vma
#define tlb_end_vma __tlb_end_vma
#endif
#ifndef __tlb_remove_tlb_entry
#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
#endif
/**
* tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
*
* Record the fact that pte's were really unmapped by updating the range,
* so we can later optimise away the tlb invalidate. This helps when
* userspace is unmapping already-unmapped pages, which happens quite a lot.
*/
#define tlb_remove_tlb_entry(tlb, ptep, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->cleared_ptes = 1; \
__tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0)
#define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \
do { \
unsigned long _sz = huge_page_size(h); \
__tlb_adjust_range(tlb, address, _sz); \
if (_sz == PMD_SIZE) \
tlb->cleared_pmds = 1; \
else if (_sz == PUD_SIZE) \
tlb->cleared_puds = 1; \
__tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0)
/**
* tlb_remove_pmd_tlb_entry - remember a pmd mapping for later tlb invalidation
* This is a nop so far, because only x86 needs it.
*/
#ifndef __tlb_remove_pmd_tlb_entry
#define __tlb_remove_pmd_tlb_entry(tlb, pmdp, address) do {} while (0)
#endif
#define tlb_remove_pmd_tlb_entry(tlb, pmdp, address) \
do { \
__tlb_adjust_range(tlb, address, HPAGE_PMD_SIZE); \
tlb->cleared_pmds = 1; \
__tlb_remove_pmd_tlb_entry(tlb, pmdp, address); \
} while (0)
/**
* tlb_remove_pud_tlb_entry - remember a pud mapping for later tlb
* invalidation. This is a nop so far, because only x86 needs it.
*/
#ifndef __tlb_remove_pud_tlb_entry
#define __tlb_remove_pud_tlb_entry(tlb, pudp, address) do {} while (0)
#endif
#define tlb_remove_pud_tlb_entry(tlb, pudp, address) \
do { \
__tlb_adjust_range(tlb, address, HPAGE_PUD_SIZE); \
tlb->cleared_puds = 1; \
__tlb_remove_pud_tlb_entry(tlb, pudp, address); \
} while (0)
/*
* For things like page tables caches (ie caching addresses "inside" the
* page tables, like x86 does), for legacy reasons, flushing an
* individual page had better flush the page table caches behind it. This
* is definitely how x86 works, for example. And if you have an
* architected non-legacy page table cache (which I'm not aware of
* anybody actually doing), you're going to have some architecturally
* explicit flushing for that, likely *separate* from a regular TLB entry
* flush, and thus you'd need more than just some range expansion..
*
* So if we ever find an architecture
* that would want something that odd, I think it is up to that
* architecture to do its own odd thing, not cause pain for others
* http://lkml.kernel.org/r/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com
*
* For now w.r.t page table cache, mark the range_size as PAGE_SIZE
*/
#ifndef pte_free_tlb
#define pte_free_tlb(tlb, ptep, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->freed_tables = 1; \
tlb->cleared_pmds = 1; \
__pte_free_tlb(tlb, ptep, address); \
} while (0)
#endif
#ifndef pmd_free_tlb
#define pmd_free_tlb(tlb, pmdp, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->freed_tables = 1; \
tlb->cleared_puds = 1; \
__pmd_free_tlb(tlb, pmdp, address); \
} while (0)
#endif
#ifndef __ARCH_HAS_4LEVEL_HACK
#ifndef pud_free_tlb
#define pud_free_tlb(tlb, pudp, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->freed_tables = 1; \
tlb->cleared_p4ds = 1; \
__pud_free_tlb(tlb, pudp, address); \
} while (0)
#endif
#endif
#ifndef __ARCH_HAS_5LEVEL_HACK
#ifndef p4d_free_tlb
#define p4d_free_tlb(tlb, pudp, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->freed_tables = 1; \
__p4d_free_tlb(tlb, pudp, address); \
} while (0)
#endif
#endif
#endif /* CONFIG_MMU */
#define tlb_migrate_finish(mm) do {} while (0)
#endif /* _ASM_GENERIC__TLB_H */