| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| |
| #define PWM_CONTROL 0x000 |
| #define PWM_CONTROL_SHIFT(x) ((x) * 8) |
| #define PWM_CONTROL_MASK 0xff |
| #define PWM_MODE 0x80 /* set timer in PWM mode */ |
| #define PWM_ENABLE (1 << 0) |
| #define PWM_POLARITY (1 << 4) |
| |
| #define PERIOD(x) (((x) * 0x10) + 0x10) |
| #define DUTY(x) (((x) * 0x10) + 0x14) |
| |
| #define PERIOD_MIN 0x2 |
| |
| struct bcm2835_pwm { |
| struct pwm_chip chip; |
| struct device *dev; |
| void __iomem *base; |
| struct clk *clk; |
| }; |
| |
| static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct bcm2835_pwm, chip); |
| } |
| |
| static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); |
| u32 value; |
| |
| value = readl(pc->base + PWM_CONTROL); |
| value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm)); |
| value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm)); |
| writel(value, pc->base + PWM_CONTROL); |
| |
| return 0; |
| } |
| |
| static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); |
| u32 value; |
| |
| value = readl(pc->base + PWM_CONTROL); |
| value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm)); |
| writel(value, pc->base + PWM_CONTROL); |
| } |
| |
| static int bcm2835_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| |
| struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); |
| unsigned long rate = clk_get_rate(pc->clk); |
| unsigned long long period; |
| unsigned long scaler; |
| u32 val; |
| |
| if (!rate) { |
| dev_err(pc->dev, "failed to get clock rate\n"); |
| return -EINVAL; |
| } |
| |
| scaler = DIV_ROUND_CLOSEST(NSEC_PER_SEC, rate); |
| /* set period */ |
| period = DIV_ROUND_CLOSEST_ULL(state->period, scaler); |
| |
| /* dont accept a period that is too small or has been truncated */ |
| if ((period < PERIOD_MIN) || (period > U32_MAX)) |
| return -EINVAL; |
| |
| writel(period, pc->base + PERIOD(pwm->hwpwm)); |
| |
| /* set duty cycle */ |
| val = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, scaler); |
| writel(val, pc->base + DUTY(pwm->hwpwm)); |
| |
| /* set polarity */ |
| val = readl(pc->base + PWM_CONTROL); |
| |
| if (state->polarity == PWM_POLARITY_NORMAL) |
| val &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm)); |
| else |
| val |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm); |
| |
| /* enable/disable */ |
| if (state->enabled) |
| val |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm); |
| else |
| val &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm)); |
| |
| writel(val, pc->base + PWM_CONTROL); |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops bcm2835_pwm_ops = { |
| .request = bcm2835_pwm_request, |
| .free = bcm2835_pwm_free, |
| .apply = bcm2835_pwm_apply, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int bcm2835_pwm_probe(struct platform_device *pdev) |
| { |
| struct bcm2835_pwm *pc; |
| int ret; |
| |
| pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); |
| if (!pc) |
| return -ENOMEM; |
| |
| pc->dev = &pdev->dev; |
| |
| pc->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(pc->base)) |
| return PTR_ERR(pc->base); |
| |
| pc->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(pc->clk)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk), |
| "clock not found\n"); |
| |
| ret = clk_prepare_enable(pc->clk); |
| if (ret) |
| return ret; |
| |
| pc->chip.dev = &pdev->dev; |
| pc->chip.ops = &bcm2835_pwm_ops; |
| pc->chip.base = -1; |
| pc->chip.npwm = 2; |
| pc->chip.of_xlate = of_pwm_xlate_with_flags; |
| pc->chip.of_pwm_n_cells = 3; |
| |
| platform_set_drvdata(pdev, pc); |
| |
| ret = pwmchip_add(&pc->chip); |
| if (ret < 0) |
| goto add_fail; |
| |
| return 0; |
| |
| add_fail: |
| clk_disable_unprepare(pc->clk); |
| return ret; |
| } |
| |
| static int bcm2835_pwm_remove(struct platform_device *pdev) |
| { |
| struct bcm2835_pwm *pc = platform_get_drvdata(pdev); |
| |
| clk_disable_unprepare(pc->clk); |
| |
| return pwmchip_remove(&pc->chip); |
| } |
| |
| static const struct of_device_id bcm2835_pwm_of_match[] = { |
| { .compatible = "brcm,bcm2835-pwm", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match); |
| |
| static struct platform_driver bcm2835_pwm_driver = { |
| .driver = { |
| .name = "bcm2835-pwm", |
| .of_match_table = bcm2835_pwm_of_match, |
| }, |
| .probe = bcm2835_pwm_probe, |
| .remove = bcm2835_pwm_remove, |
| }; |
| module_platform_driver(bcm2835_pwm_driver); |
| |
| MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be>"); |
| MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver"); |
| MODULE_LICENSE("GPL v2"); |