drivers/gpu/drm/tiny/mi0283qt.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * DRM driver for Multi-Inno MI0283QT panels
  *
  * Copyright 2016 Noralf Trønnes
  */

 #include <linux/backlight.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>

 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_managed.h>
 #include <drm/drm_mipi_dbi.h>
 #include <drm/drm_modeset_helper.h>
 #include <video/mipi_display.h>

 #define ILI9341_FRMCTR1		0xb1
 #define ILI9341_DISCTRL		0xb6
 #define ILI9341_ETMOD		0xb7

 #define ILI9341_PWCTRL1		0xc0
 #define ILI9341_PWCTRL2		0xc1
 #define ILI9341_VMCTRL1		0xc5
 #define ILI9341_VMCTRL2		0xc7
 #define ILI9341_PWCTRLA		0xcb
 #define ILI9341_PWCTRLB		0xcf

 #define ILI9341_PGAMCTRL	0xe0
 #define ILI9341_NGAMCTRL	0xe1
 #define ILI9341_DTCTRLA		0xe8
 #define ILI9341_DTCTRLB		0xea
 #define ILI9341_PWRSEQ		0xed

 #define ILI9341_EN3GAM		0xf2
 #define ILI9341_PUMPCTRL	0xf7

 #define ILI9341_MADCTL_BGR	BIT(3)
 #define ILI9341_MADCTL_MV	BIT(5)
 #define ILI9341_MADCTL_MX	BIT(6)
 #define ILI9341_MADCTL_MY	BIT(7)

 static void mi0283qt_enable(struct drm_simple_display_pipe *pipe,
 			    struct drm_crtc_state *crtc_state,
 			    struct drm_plane_state *plane_state)
 {
 	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
 	struct mipi_dbi *dbi = &dbidev->dbi;
 	u8 addr_mode;
 	int ret, idx;

 	if (!drm_dev_enter(pipe->crtc.dev, &idx))
 		return;

 	DRM_DEBUG_KMS("\n");

 	ret = mipi_dbi_poweron_conditional_reset(dbidev);
 	if (ret < 0)
 		goto out_exit;
 	if (ret == 1)
 		goto out_enable;

 	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF);

 	mipi_dbi_command(dbi, ILI9341_PWCTRLB, 0x00, 0x83, 0x30);
 	mipi_dbi_command(dbi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81);
 	mipi_dbi_command(dbi, ILI9341_DTCTRLA, 0x85, 0x01, 0x79);
 	mipi_dbi_command(dbi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02);
 	mipi_dbi_command(dbi, ILI9341_PUMPCTRL, 0x20);
 	mipi_dbi_command(dbi, ILI9341_DTCTRLB, 0x00, 0x00);

 	/* Power Control */
 	mipi_dbi_command(dbi, ILI9341_PWCTRL1, 0x26);
 	mipi_dbi_command(dbi, ILI9341_PWCTRL2, 0x11);
 	/* VCOM */
 	mipi_dbi_command(dbi, ILI9341_VMCTRL1, 0x35, 0x3e);
 	mipi_dbi_command(dbi, ILI9341_VMCTRL2, 0xbe);

 	/* Memory Access Control */
 	mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);

 	/* Frame Rate */
 	mipi_dbi_command(dbi, ILI9341_FRMCTR1, 0x00, 0x1b);

 	/* Gamma */
 	mipi_dbi_command(dbi, ILI9341_EN3GAM, 0x08);
 	mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
 	mipi_dbi_command(dbi, ILI9341_PGAMCTRL,
 		       0x1f, 0x1a, 0x18, 0x0a, 0x0f, 0x06, 0x45, 0x87,
 		       0x32, 0x0a, 0x07, 0x02, 0x07, 0x05, 0x00);
 	mipi_dbi_command(dbi, ILI9341_NGAMCTRL,
 		       0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3a, 0x78,
 		       0x4d, 0x05, 0x18, 0x0d, 0x38, 0x3a, 0x1f);

 	/* DDRAM */
 	mipi_dbi_command(dbi, ILI9341_ETMOD, 0x07);

 	/* Display */
 	mipi_dbi_command(dbi, ILI9341_DISCTRL, 0x0a, 0x82, 0x27, 0x00);
 	mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
 	msleep(100);

 	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
 	msleep(100);

 out_enable:
 	/* The PiTFT (ili9340) has a hardware reset circuit that
 	 * resets only on power-on and not on each reboot through
 	 * a gpio like the rpi-display does.
 	 * As a result, we need to always apply the rotation value
 	 * regardless of the display "on/off" state.
 	 */
 	switch (dbidev->rotation) {
 	default:
 		addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY |
 			    ILI9341_MADCTL_MX;
 		break;
 	case 90:
 		addr_mode = ILI9341_MADCTL_MY;
 		break;
 	case 180:
 		addr_mode = ILI9341_MADCTL_MV;
 		break;
 	case 270:
 		addr_mode = ILI9341_MADCTL_MX;
 		break;
 	}
 	addr_mode |= ILI9341_MADCTL_BGR;
 	mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
 	mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
 out_exit:
 	drm_dev_exit(idx);
 }

 static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = {
 	.enable = mi0283qt_enable,
 	.disable = mipi_dbi_pipe_disable,
 	.update = mipi_dbi_pipe_update,
 	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
 };

 static const struct drm_display_mode mi0283qt_mode = {
 	DRM_SIMPLE_MODE(320, 240, 58, 43),
 };

 DEFINE_DRM_GEM_CMA_FOPS(mi0283qt_fops);

 static struct drm_driver mi0283qt_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 	.fops			= &mi0283qt_fops,
 	DRM_GEM_CMA_DRIVER_OPS_VMAP,
 	.debugfs_init		= mipi_dbi_debugfs_init,
 	.name			= "mi0283qt",
 	.desc			= "Multi-Inno MI0283QT",
 	.date			= "20160614",
 	.major			= 1,
 	.minor			= 0,
 };

 static const struct of_device_id mi0283qt_of_match[] = {
 	{ .compatible = "multi-inno,mi0283qt" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, mi0283qt_of_match);

 static const struct spi_device_id mi0283qt_id[] = {
 	{ "mi0283qt", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, mi0283qt_id);

 static int mi0283qt_probe(struct spi_device *spi)
 {
 	struct device *dev = &spi->dev;
 	struct mipi_dbi_dev *dbidev;
 	struct drm_device *drm;
 	struct mipi_dbi *dbi;
 	struct gpio_desc *dc;
 	u32 rotation = 0;
 	int ret;

 	dbidev = devm_drm_dev_alloc(dev, &mi0283qt_driver,
 				    struct mipi_dbi_dev, drm);
 	if (IS_ERR(dbidev))
 		return PTR_ERR(dbidev);

 	dbi = &dbidev->dbi;
 	drm = &dbidev->drm;

 	dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(dbi->reset)) {
 		DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
 		return PTR_ERR(dbi->reset);
 	}

 	dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
 	if (IS_ERR(dc)) {
 		DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");
 		return PTR_ERR(dc);
 	}

 	dbidev->regulator = devm_regulator_get(dev, "power");
 	if (IS_ERR(dbidev->regulator))
 		return PTR_ERR(dbidev->regulator);

 	dbidev->backlight = devm_of_find_backlight(dev);
 	if (IS_ERR(dbidev->backlight))
 		return PTR_ERR(dbidev->backlight);

 	device_property_read_u32(dev, "rotation", &rotation);

 	ret = mipi_dbi_spi_init(spi, dbi, dc);
 	if (ret)
 		return ret;

 	ret = mipi_dbi_dev_init(dbidev, &mi0283qt_pipe_funcs, &mi0283qt_mode, rotation);
 	if (ret)
 		return ret;

 	drm_mode_config_reset(drm);

 	ret = drm_dev_register(drm, 0);
 	if (ret)
 		return ret;

 	spi_set_drvdata(spi, drm);

 	drm_fbdev_generic_setup(drm, 0);

 	return 0;
 }

 static int mi0283qt_remove(struct spi_device *spi)
 {
 	struct drm_device *drm = spi_get_drvdata(spi);

 	drm_dev_unplug(drm);
 	drm_atomic_helper_shutdown(drm);

 	return 0;
 }

 static void mi0283qt_shutdown(struct spi_device *spi)
 {
 	drm_atomic_helper_shutdown(spi_get_drvdata(spi));
 }

 static int __maybe_unused mi0283qt_pm_suspend(struct device *dev)
 {
 	return drm_mode_config_helper_suspend(dev_get_drvdata(dev));
 }

 static int __maybe_unused mi0283qt_pm_resume(struct device *dev)
 {
 	drm_mode_config_helper_resume(dev_get_drvdata(dev));

 	return 0;
 }

 static const struct dev_pm_ops mi0283qt_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(mi0283qt_pm_suspend, mi0283qt_pm_resume)
 };

 static struct spi_driver mi0283qt_spi_driver = {
 	.driver = {
 		.name = "mi0283qt",
 		.owner = THIS_MODULE,
 		.of_match_table = mi0283qt_of_match,
 		.pm = &mi0283qt_pm_ops,
 	},
 	.id_table = mi0283qt_id,
 	.probe = mi0283qt_probe,
 	.remove = mi0283qt_remove,
 	.shutdown = mi0283qt_shutdown,
 };
 module_spi_driver(mi0283qt_spi_driver);

 MODULE_DESCRIPTION("Multi-Inno MI0283QT DRM driver");
 MODULE_AUTHOR("Noralf Trønnes");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* DRM driver for Multi-Inno MI0283QT panels
	*
	* Copyright 2016 Noralf Trønnes
	*/

	#include <linux/backlight.h>
	#include <linux/delay.h>
	#include <linux/gpio/consumer.h>
	#include <linux/module.h>
	#include <linux/property.h>
	#include <linux/regulator/consumer.h>
	#include <linux/spi/spi.h>

	#include <drm/drm_atomic_helper.h>
	#include <drm/drm_drv.h>
	#include <drm/drm_fb_helper.h>
	#include <drm/drm_gem_cma_helper.h>
	#include <drm/drm_gem_framebuffer_helper.h>
	#include <drm/drm_managed.h>
	#include <drm/drm_mipi_dbi.h>
	#include <drm/drm_modeset_helper.h>
	#include <video/mipi_display.h>

	#define ILI9341_FRMCTR1 0xb1
	#define ILI9341_DISCTRL 0xb6
	#define ILI9341_ETMOD 0xb7

	#define ILI9341_PWCTRL1 0xc0
	#define ILI9341_PWCTRL2 0xc1
	#define ILI9341_VMCTRL1 0xc5
	#define ILI9341_VMCTRL2 0xc7
	#define ILI9341_PWCTRLA 0xcb
	#define ILI9341_PWCTRLB 0xcf

	#define ILI9341_PGAMCTRL 0xe0
	#define ILI9341_NGAMCTRL 0xe1
	#define ILI9341_DTCTRLA 0xe8
	#define ILI9341_DTCTRLB 0xea
	#define ILI9341_PWRSEQ 0xed

	#define ILI9341_EN3GAM 0xf2
	#define ILI9341_PUMPCTRL 0xf7

	#define ILI9341_MADCTL_BGR BIT(3)
	#define ILI9341_MADCTL_MV BIT(5)
	#define ILI9341_MADCTL_MX BIT(6)
	#define ILI9341_MADCTL_MY BIT(7)

	static void mi0283qt_enable(struct drm_simple_display_pipe *pipe,
	struct drm_crtc_state *crtc_state,
	struct drm_plane_state *plane_state)
	{
	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
	struct mipi_dbi *dbi = &dbidev->dbi;
	u8 addr_mode;
	int ret, idx;

	if (!drm_dev_enter(pipe->crtc.dev, &idx))
	return;

	DRM_DEBUG_KMS("\n");

	ret = mipi_dbi_poweron_conditional_reset(dbidev);
	if (ret < 0)
	goto out_exit;
	if (ret == 1)
	goto out_enable;

	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF);

	mipi_dbi_command(dbi, ILI9341_PWCTRLB, 0x00, 0x83, 0x30);
	mipi_dbi_command(dbi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81);
	mipi_dbi_command(dbi, ILI9341_DTCTRLA, 0x85, 0x01, 0x79);
	mipi_dbi_command(dbi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02);
	mipi_dbi_command(dbi, ILI9341_PUMPCTRL, 0x20);
	mipi_dbi_command(dbi, ILI9341_DTCTRLB, 0x00, 0x00);

	/* Power Control */
	mipi_dbi_command(dbi, ILI9341_PWCTRL1, 0x26);
	mipi_dbi_command(dbi, ILI9341_PWCTRL2, 0x11);
	/* VCOM */
	mipi_dbi_command(dbi, ILI9341_VMCTRL1, 0x35, 0x3e);
	mipi_dbi_command(dbi, ILI9341_VMCTRL2, 0xbe);

	/* Memory Access Control */
	mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);

	/* Frame Rate */
	mipi_dbi_command(dbi, ILI9341_FRMCTR1, 0x00, 0x1b);

	/* Gamma */
	mipi_dbi_command(dbi, ILI9341_EN3GAM, 0x08);
	mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
	mipi_dbi_command(dbi, ILI9341_PGAMCTRL,
	0x1f, 0x1a, 0x18, 0x0a, 0x0f, 0x06, 0x45, 0x87,
	0x32, 0x0a, 0x07, 0x02, 0x07, 0x05, 0x00);
	mipi_dbi_command(dbi, ILI9341_NGAMCTRL,
	0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3a, 0x78,
	0x4d, 0x05, 0x18, 0x0d, 0x38, 0x3a, 0x1f);

	/* DDRAM */
	mipi_dbi_command(dbi, ILI9341_ETMOD, 0x07);

	/* Display */
	mipi_dbi_command(dbi, ILI9341_DISCTRL, 0x0a, 0x82, 0x27, 0x00);
	mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
	msleep(100);

	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
	msleep(100);

	out_enable:
	/* The PiTFT (ili9340) has a hardware reset circuit that
	* resets only on power-on and not on each reboot through
	* a gpio like the rpi-display does.
	* As a result, we need to always apply the rotation value
	* regardless of the display "on/off" state.
	*/
	switch (dbidev->rotation) {
	default:
	addr_mode = ILI9341_MADCTL_MV \| ILI9341_MADCTL_MY \|
	ILI9341_MADCTL_MX;
	break;
	case 90:
	addr_mode = ILI9341_MADCTL_MY;
	break;
	case 180:
	addr_mode = ILI9341_MADCTL_MV;
	break;
	case 270:
	addr_mode = ILI9341_MADCTL_MX;
	break;
	}
	addr_mode \|= ILI9341_MADCTL_BGR;
	mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
	mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
	out_exit:
	drm_dev_exit(idx);
	}

	static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = {
	.enable = mi0283qt_enable,
	.disable = mipi_dbi_pipe_disable,
	.update = mipi_dbi_pipe_update,
	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
	};

	static const struct drm_display_mode mi0283qt_mode = {
	DRM_SIMPLE_MODE(320, 240, 58, 43),
	};

	DEFINE_DRM_GEM_CMA_FOPS(mi0283qt_fops);

	static struct drm_driver mi0283qt_driver = {
	.driver_features = DRIVER_GEM \| DRIVER_MODESET \| DRIVER_ATOMIC,
	.fops = &mi0283qt_fops,
	DRM_GEM_CMA_DRIVER_OPS_VMAP,
	.debugfs_init = mipi_dbi_debugfs_init,
	.name = "mi0283qt",
	.desc = "Multi-Inno MI0283QT",
	.date = "20160614",
	.major = 1,
	.minor = 0,
	};

	static const struct of_device_id mi0283qt_of_match[] = {
	{ .compatible = "multi-inno,mi0283qt" },
	{},
	};
	MODULE_DEVICE_TABLE(of, mi0283qt_of_match);

	static const struct spi_device_id mi0283qt_id[] = {
	{ "mi0283qt", 0 },
	{ },
	};
	MODULE_DEVICE_TABLE(spi, mi0283qt_id);

	static int mi0283qt_probe(struct spi_device *spi)
	{
	struct device *dev = &spi->dev;
	struct mipi_dbi_dev *dbidev;
	struct drm_device *drm;
	struct mipi_dbi *dbi;
	struct gpio_desc *dc;
	u32 rotation = 0;
	int ret;

	dbidev = devm_drm_dev_alloc(dev, &mi0283qt_driver,
	struct mipi_dbi_dev, drm);
	if (IS_ERR(dbidev))
	return PTR_ERR(dbidev);

	dbi = &dbidev->dbi;
	drm = &dbidev->drm;

	dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
	if (IS_ERR(dbi->reset)) {
	DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
	return PTR_ERR(dbi->reset);
	}

	dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
	if (IS_ERR(dc)) {
	DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");
	return PTR_ERR(dc);
	}

	dbidev->regulator = devm_regulator_get(dev, "power");
	if (IS_ERR(dbidev->regulator))
	return PTR_ERR(dbidev->regulator);

	dbidev->backlight = devm_of_find_backlight(dev);
	if (IS_ERR(dbidev->backlight))
	return PTR_ERR(dbidev->backlight);

	device_property_read_u32(dev, "rotation", &rotation);

	ret = mipi_dbi_spi_init(spi, dbi, dc);
	if (ret)
	return ret;

	ret = mipi_dbi_dev_init(dbidev, &mi0283qt_pipe_funcs, &mi0283qt_mode, rotation);
	if (ret)
	return ret;

	drm_mode_config_reset(drm);

	ret = drm_dev_register(drm, 0);
	if (ret)
	return ret;

	spi_set_drvdata(spi, drm);

	drm_fbdev_generic_setup(drm, 0);

	return 0;
	}

	static int mi0283qt_remove(struct spi_device *spi)
	{
	struct drm_device *drm = spi_get_drvdata(spi);

	drm_dev_unplug(drm);
	drm_atomic_helper_shutdown(drm);

	return 0;
	}

	static void mi0283qt_shutdown(struct spi_device *spi)
	{
	drm_atomic_helper_shutdown(spi_get_drvdata(spi));
	}

	static int __maybe_unused mi0283qt_pm_suspend(struct device *dev)
	{
	return drm_mode_config_helper_suspend(dev_get_drvdata(dev));
	}

	static int __maybe_unused mi0283qt_pm_resume(struct device *dev)
	{
	drm_mode_config_helper_resume(dev_get_drvdata(dev));

	return 0;
	}

	static const struct dev_pm_ops mi0283qt_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(mi0283qt_pm_suspend, mi0283qt_pm_resume)
	};

	static struct spi_driver mi0283qt_spi_driver = {
	.driver = {
	.name = "mi0283qt",
	.owner = THIS_MODULE,
	.of_match_table = mi0283qt_of_match,
	.pm = &mi0283qt_pm_ops,
	},
	.id_table = mi0283qt_id,
	.probe = mi0283qt_probe,
	.remove = mi0283qt_remove,
	.shutdown = mi0283qt_shutdown,
	};
	module_spi_driver(mi0283qt_spi_driver);

	MODULE_DESCRIPTION("Multi-Inno MI0283QT DRM driver");
	MODULE_AUTHOR("Noralf Trønnes");
	MODULE_LICENSE("GPL");