| // SPDX-License-Identifier: GPL-2.0-only |
| // Copyright (c) 2020, The Linux Foundation. All rights reserved. |
| |
| #include <linux/module.h> |
| #include <linux/of_irq.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| #define REG_PERPH_TYPE 0x04 |
| |
| #define QCOM_LAB_TYPE 0x24 |
| #define QCOM_IBB_TYPE 0x20 |
| |
| #define PMI8998_LAB_REG_BASE 0xde00 |
| #define PMI8998_IBB_REG_BASE 0xdc00 |
| |
| #define REG_LABIBB_STATUS1 0x08 |
| #define REG_LABIBB_ENABLE_CTL 0x46 |
| #define LABIBB_STATUS1_VREG_OK_BIT BIT(7) |
| #define LABIBB_CONTROL_ENABLE BIT(7) |
| |
| #define LAB_ENABLE_CTL_MASK BIT(7) |
| #define IBB_ENABLE_CTL_MASK (BIT(7) | BIT(6)) |
| |
| #define LABIBB_OFF_ON_DELAY 1000 |
| #define LAB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 2) |
| #define IBB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 10) |
| #define LABIBB_POLL_ENABLED_TIME 1000 |
| |
| struct labibb_regulator { |
| struct regulator_desc desc; |
| struct device *dev; |
| struct regmap *regmap; |
| struct regulator_dev *rdev; |
| u16 base; |
| u8 type; |
| }; |
| |
| struct labibb_regulator_data { |
| const char *name; |
| u8 type; |
| u16 base; |
| struct regulator_desc *desc; |
| }; |
| |
| static struct regulator_ops qcom_labibb_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| }; |
| |
| static struct regulator_desc pmi8998_lab_desc = { |
| .enable_mask = LAB_ENABLE_CTL_MASK, |
| .enable_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_ENABLE_CTL), |
| .enable_val = LABIBB_CONTROL_ENABLE, |
| .enable_time = LAB_ENABLE_TIME, |
| .poll_enabled_time = LABIBB_POLL_ENABLED_TIME, |
| .off_on_delay = LABIBB_OFF_ON_DELAY, |
| .owner = THIS_MODULE, |
| .type = REGULATOR_VOLTAGE, |
| .ops = &qcom_labibb_ops, |
| }; |
| |
| static struct regulator_desc pmi8998_ibb_desc = { |
| .enable_mask = IBB_ENABLE_CTL_MASK, |
| .enable_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_ENABLE_CTL), |
| .enable_val = LABIBB_CONTROL_ENABLE, |
| .enable_time = IBB_ENABLE_TIME, |
| .poll_enabled_time = LABIBB_POLL_ENABLED_TIME, |
| .off_on_delay = LABIBB_OFF_ON_DELAY, |
| .owner = THIS_MODULE, |
| .type = REGULATOR_VOLTAGE, |
| .ops = &qcom_labibb_ops, |
| }; |
| |
| static const struct labibb_regulator_data pmi8998_labibb_data[] = { |
| {"lab", QCOM_LAB_TYPE, PMI8998_LAB_REG_BASE, &pmi8998_lab_desc}, |
| {"ibb", QCOM_IBB_TYPE, PMI8998_IBB_REG_BASE, &pmi8998_ibb_desc}, |
| { }, |
| }; |
| |
| static const struct of_device_id qcom_labibb_match[] = { |
| { .compatible = "qcom,pmi8998-lab-ibb", .data = &pmi8998_labibb_data}, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, qcom_labibb_match); |
| |
| static int qcom_labibb_regulator_probe(struct platform_device *pdev) |
| { |
| struct labibb_regulator *vreg; |
| struct device *dev = &pdev->dev; |
| struct regulator_config cfg = {}; |
| |
| const struct of_device_id *match; |
| const struct labibb_regulator_data *reg_data; |
| struct regmap *reg_regmap; |
| unsigned int type; |
| int ret; |
| |
| reg_regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!reg_regmap) { |
| dev_err(&pdev->dev, "Couldn't get parent's regmap\n"); |
| return -ENODEV; |
| } |
| |
| match = of_match_device(qcom_labibb_match, &pdev->dev); |
| if (!match) |
| return -ENODEV; |
| |
| for (reg_data = match->data; reg_data->name; reg_data++) { |
| |
| /* Validate if the type of regulator is indeed |
| * what's mentioned in DT. |
| */ |
| ret = regmap_read(reg_regmap, reg_data->base + REG_PERPH_TYPE, |
| &type); |
| if (ret < 0) { |
| dev_err(dev, |
| "Peripheral type read failed ret=%d\n", |
| ret); |
| return -EINVAL; |
| } |
| |
| if (WARN_ON((type != QCOM_LAB_TYPE) && (type != QCOM_IBB_TYPE)) || |
| WARN_ON(type != reg_data->type)) |
| return -EINVAL; |
| |
| vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), |
| GFP_KERNEL); |
| if (!vreg) |
| return -ENOMEM; |
| |
| vreg->regmap = reg_regmap; |
| vreg->dev = dev; |
| vreg->base = reg_data->base; |
| vreg->type = reg_data->type; |
| |
| memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc)); |
| vreg->desc.of_match = reg_data->name; |
| vreg->desc.name = reg_data->name; |
| |
| cfg.dev = vreg->dev; |
| cfg.driver_data = vreg; |
| cfg.regmap = vreg->regmap; |
| |
| vreg->rdev = devm_regulator_register(vreg->dev, &vreg->desc, |
| &cfg); |
| |
| if (IS_ERR(vreg->rdev)) { |
| dev_err(dev, "qcom_labibb: error registering %s : %d\n", |
| reg_data->name, ret); |
| return PTR_ERR(vreg->rdev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver qcom_labibb_regulator_driver = { |
| .driver = { |
| .name = "qcom-lab-ibb-regulator", |
| .of_match_table = qcom_labibb_match, |
| }, |
| .probe = qcom_labibb_regulator_probe, |
| }; |
| module_platform_driver(qcom_labibb_regulator_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm labibb driver"); |
| MODULE_AUTHOR("Nisha Kumari <nishakumari@codeaurora.org>"); |
| MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>"); |
| MODULE_LICENSE("GPL v2"); |