| /* |
| * Low-Level PCI Support for PC |
| * |
| * (c) 1999--2000 Martin Mares <mj@ucw.cz> |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/pci-acpi.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/dmi.h> |
| #include <linux/slab.h> |
| |
| #include <asm/acpi.h> |
| #include <asm/segment.h> |
| #include <asm/io.h> |
| #include <asm/smp.h> |
| #include <asm/pci_x86.h> |
| #include <asm/setup.h> |
| |
| unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | |
| PCI_PROBE_MMCONF; |
| |
| unsigned int pci_early_dump_regs; |
| static int pci_bf_sort; |
| int pci_routeirq; |
| int noioapicquirk; |
| #ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS |
| int noioapicreroute = 0; |
| #else |
| int noioapicreroute = 1; |
| #endif |
| int pcibios_last_bus = -1; |
| unsigned long pirq_table_addr; |
| const struct pci_raw_ops *__read_mostly raw_pci_ops; |
| const struct pci_raw_ops *__read_mostly raw_pci_ext_ops; |
| |
| int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, |
| int reg, int len, u32 *val) |
| { |
| if (domain == 0 && reg < 256 && raw_pci_ops) |
| return raw_pci_ops->read(domain, bus, devfn, reg, len, val); |
| if (raw_pci_ext_ops) |
| return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val); |
| return -EINVAL; |
| } |
| |
| int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn, |
| int reg, int len, u32 val) |
| { |
| if (domain == 0 && reg < 256 && raw_pci_ops) |
| return raw_pci_ops->write(domain, bus, devfn, reg, len, val); |
| if (raw_pci_ext_ops) |
| return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val); |
| return -EINVAL; |
| } |
| |
| static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) |
| { |
| return raw_pci_read(pci_domain_nr(bus), bus->number, |
| devfn, where, size, value); |
| } |
| |
| static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) |
| { |
| return raw_pci_write(pci_domain_nr(bus), bus->number, |
| devfn, where, size, value); |
| } |
| |
| struct pci_ops pci_root_ops = { |
| .read = pci_read, |
| .write = pci_write, |
| }; |
| |
| /* |
| * This interrupt-safe spinlock protects all accesses to PCI configuration |
| * space, except for the mmconfig (ECAM) based operations. |
| */ |
| DEFINE_RAW_SPINLOCK(pci_config_lock); |
| |
| static int __init can_skip_ioresource_align(const struct dmi_system_id *d) |
| { |
| pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; |
| printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident); |
| return 0; |
| } |
| |
| static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = { |
| /* |
| * Systems where PCI IO resource ISA alignment can be skipped |
| * when the ISA enable bit in the bridge control is not set |
| */ |
| { |
| .callback = can_skip_ioresource_align, |
| .ident = "IBM System x3800", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "IBM"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "x3800"), |
| }, |
| }, |
| { |
| .callback = can_skip_ioresource_align, |
| .ident = "IBM System x3850", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "IBM"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "x3850"), |
| }, |
| }, |
| { |
| .callback = can_skip_ioresource_align, |
| .ident = "IBM System x3950", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "IBM"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "x3950"), |
| }, |
| }, |
| {} |
| }; |
| |
| void __init dmi_check_skip_isa_align(void) |
| { |
| dmi_check_system(can_skip_pciprobe_dmi_table); |
| } |
| |
| static void pcibios_fixup_device_resources(struct pci_dev *dev) |
| { |
| struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE]; |
| struct resource *bar_r; |
| int bar; |
| |
| if (pci_probe & PCI_NOASSIGN_BARS) { |
| /* |
| * If the BIOS did not assign the BAR, zero out the |
| * resource so the kernel doesn't attempt to assign |
| * it later on in pci_assign_unassigned_resources |
| */ |
| for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) { |
| bar_r = &dev->resource[bar]; |
| if (bar_r->start == 0 && bar_r->end != 0) { |
| bar_r->flags = 0; |
| bar_r->end = 0; |
| } |
| } |
| } |
| |
| if (pci_probe & PCI_NOASSIGN_ROMS) { |
| if (rom_r->parent) |
| return; |
| if (rom_r->start) { |
| /* we deal with BIOS assigned ROM later */ |
| return; |
| } |
| rom_r->start = rom_r->end = rom_r->flags = 0; |
| } |
| } |
| |
| /* |
| * Called after each bus is probed, but before its children |
| * are examined. |
| */ |
| |
| void pcibios_fixup_bus(struct pci_bus *b) |
| { |
| struct pci_dev *dev; |
| |
| pci_read_bridge_bases(b); |
| list_for_each_entry(dev, &b->devices, bus_list) |
| pcibios_fixup_device_resources(dev); |
| } |
| |
| void pcibios_add_bus(struct pci_bus *bus) |
| { |
| acpi_pci_add_bus(bus); |
| } |
| |
| void pcibios_remove_bus(struct pci_bus *bus) |
| { |
| acpi_pci_remove_bus(bus); |
| } |
| |
| /* |
| * Only use DMI information to set this if nothing was passed |
| * on the kernel command line (which was parsed earlier). |
| */ |
| |
| static int __init set_bf_sort(const struct dmi_system_id *d) |
| { |
| if (pci_bf_sort == pci_bf_sort_default) { |
| pci_bf_sort = pci_dmi_bf; |
| printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident); |
| } |
| return 0; |
| } |
| |
| static void __init read_dmi_type_b1(const struct dmi_header *dm, |
| void *private_data) |
| { |
| u8 *data = (u8 *)dm + 4; |
| |
| if (dm->type != 0xB1) |
| return; |
| if ((((*(u32 *)data) >> 9) & 0x03) == 0x01) |
| set_bf_sort((const struct dmi_system_id *)private_data); |
| } |
| |
| static int __init find_sort_method(const struct dmi_system_id *d) |
| { |
| dmi_walk(read_dmi_type_b1, (void *)d); |
| return 0; |
| } |
| |
| /* |
| * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) |
| */ |
| #ifdef __i386__ |
| static int __init assign_all_busses(const struct dmi_system_id *d) |
| { |
| pci_probe |= PCI_ASSIGN_ALL_BUSSES; |
| printk(KERN_INFO "%s detected: enabling PCI bus# renumbering" |
| " (pci=assign-busses)\n", d->ident); |
| return 0; |
| } |
| #endif |
| |
| static int __init set_scan_all(const struct dmi_system_id *d) |
| { |
| printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n", |
| d->ident); |
| pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS); |
| return 0; |
| } |
| |
| static const struct dmi_system_id pciprobe_dmi_table[] __initconst = { |
| #ifdef __i386__ |
| /* |
| * Laptops which need pci=assign-busses to see Cardbus cards |
| */ |
| { |
| .callback = assign_all_busses, |
| .ident = "Samsung X20 Laptop", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"), |
| }, |
| }, |
| #endif /* __i386__ */ |
| { |
| .callback = set_bf_sort, |
| .ident = "Dell PowerEdge 1950", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "Dell PowerEdge 1955", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "Dell PowerEdge 2900", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "Dell PowerEdge 2950", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "Dell PowerEdge R900", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"), |
| }, |
| }, |
| { |
| .callback = find_sort_method, |
| .ident = "Dell System", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL20p G3", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL20p G4", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL30p G1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL25p G1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL35p G1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL45p G1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL45p G2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL460c G1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL465c G1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL480c G1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant BL685c G1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant DL360", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant DL380", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"), |
| }, |
| }, |
| #ifdef __i386__ |
| { |
| .callback = assign_all_busses, |
| .ident = "Compaq EVO N800c", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"), |
| }, |
| }, |
| #endif |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant DL385 G2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"), |
| }, |
| }, |
| { |
| .callback = set_bf_sort, |
| .ident = "HP ProLiant DL585 G2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "HP"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"), |
| }, |
| }, |
| { |
| .callback = set_scan_all, |
| .ident = "Stratus/NEC ftServer", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Stratus"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"), |
| }, |
| }, |
| { |
| .callback = set_scan_all, |
| .ident = "Stratus/NEC ftServer", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "NEC"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"), |
| }, |
| }, |
| { |
| .callback = set_scan_all, |
| .ident = "Stratus/NEC ftServer", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "NEC"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"), |
| }, |
| }, |
| {} |
| }; |
| |
| void __init dmi_check_pciprobe(void) |
| { |
| dmi_check_system(pciprobe_dmi_table); |
| } |
| |
| void pcibios_scan_root(int busnum) |
| { |
| struct pci_bus *bus; |
| struct pci_sysdata *sd; |
| LIST_HEAD(resources); |
| |
| sd = kzalloc(sizeof(*sd), GFP_KERNEL); |
| if (!sd) { |
| printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum); |
| return; |
| } |
| sd->node = x86_pci_root_bus_node(busnum); |
| x86_pci_root_bus_resources(busnum, &resources); |
| printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); |
| bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources); |
| if (!bus) { |
| pci_free_resource_list(&resources); |
| kfree(sd); |
| return; |
| } |
| pci_bus_add_devices(bus); |
| } |
| |
| void __init pcibios_set_cache_line_size(void) |
| { |
| struct cpuinfo_x86 *c = &boot_cpu_data; |
| |
| /* |
| * Set PCI cacheline size to that of the CPU if the CPU has reported it. |
| * (For older CPUs that don't support cpuid, we se it to 32 bytes |
| * It's also good for 386/486s (which actually have 16) |
| * as quite a few PCI devices do not support smaller values. |
| */ |
| if (c->x86_clflush_size > 0) { |
| pci_dfl_cache_line_size = c->x86_clflush_size >> 2; |
| printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n", |
| pci_dfl_cache_line_size << 2); |
| } else { |
| pci_dfl_cache_line_size = 32 >> 2; |
| printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n"); |
| } |
| } |
| |
| int __init pcibios_init(void) |
| { |
| if (!raw_pci_ops && !raw_pci_ext_ops) { |
| printk(KERN_WARNING "PCI: System does not support PCI\n"); |
| return 0; |
| } |
| |
| pcibios_set_cache_line_size(); |
| pcibios_resource_survey(); |
| |
| if (pci_bf_sort >= pci_force_bf) |
| pci_sort_breadthfirst(); |
| return 0; |
| } |
| |
| char *__init pcibios_setup(char *str) |
| { |
| if (!strcmp(str, "off")) { |
| pci_probe = 0; |
| return NULL; |
| } else if (!strcmp(str, "bfsort")) { |
| pci_bf_sort = pci_force_bf; |
| return NULL; |
| } else if (!strcmp(str, "nobfsort")) { |
| pci_bf_sort = pci_force_nobf; |
| return NULL; |
| } |
| #ifdef CONFIG_PCI_BIOS |
| else if (!strcmp(str, "bios")) { |
| pci_probe = PCI_PROBE_BIOS; |
| return NULL; |
| } else if (!strcmp(str, "nobios")) { |
| pci_probe &= ~PCI_PROBE_BIOS; |
| return NULL; |
| } else if (!strcmp(str, "biosirq")) { |
| pci_probe |= PCI_BIOS_IRQ_SCAN; |
| return NULL; |
| } else if (!strncmp(str, "pirqaddr=", 9)) { |
| pirq_table_addr = simple_strtoul(str+9, NULL, 0); |
| return NULL; |
| } |
| #endif |
| #ifdef CONFIG_PCI_DIRECT |
| else if (!strcmp(str, "conf1")) { |
| pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS; |
| return NULL; |
| } |
| else if (!strcmp(str, "conf2")) { |
| pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS; |
| return NULL; |
| } |
| #endif |
| #ifdef CONFIG_PCI_MMCONFIG |
| else if (!strcmp(str, "nommconf")) { |
| pci_probe &= ~PCI_PROBE_MMCONF; |
| return NULL; |
| } |
| else if (!strcmp(str, "check_enable_amd_mmconf")) { |
| pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; |
| return NULL; |
| } |
| #endif |
| else if (!strcmp(str, "noacpi")) { |
| acpi_noirq_set(); |
| return NULL; |
| } |
| else if (!strcmp(str, "noearly")) { |
| pci_probe |= PCI_PROBE_NOEARLY; |
| return NULL; |
| } |
| else if (!strcmp(str, "usepirqmask")) { |
| pci_probe |= PCI_USE_PIRQ_MASK; |
| return NULL; |
| } else if (!strncmp(str, "irqmask=", 8)) { |
| pcibios_irq_mask = simple_strtol(str+8, NULL, 0); |
| return NULL; |
| } else if (!strncmp(str, "lastbus=", 8)) { |
| pcibios_last_bus = simple_strtol(str+8, NULL, 0); |
| return NULL; |
| } else if (!strcmp(str, "rom")) { |
| pci_probe |= PCI_ASSIGN_ROMS; |
| return NULL; |
| } else if (!strcmp(str, "norom")) { |
| pci_probe |= PCI_NOASSIGN_ROMS; |
| return NULL; |
| } else if (!strcmp(str, "nobar")) { |
| pci_probe |= PCI_NOASSIGN_BARS; |
| return NULL; |
| } else if (!strcmp(str, "assign-busses")) { |
| pci_probe |= PCI_ASSIGN_ALL_BUSSES; |
| return NULL; |
| } else if (!strcmp(str, "use_crs")) { |
| pci_probe |= PCI_USE__CRS; |
| return NULL; |
| } else if (!strcmp(str, "nocrs")) { |
| pci_probe |= PCI_ROOT_NO_CRS; |
| return NULL; |
| } else if (!strcmp(str, "earlydump")) { |
| pci_early_dump_regs = 1; |
| return NULL; |
| } else if (!strcmp(str, "routeirq")) { |
| pci_routeirq = 1; |
| return NULL; |
| } else if (!strcmp(str, "skip_isa_align")) { |
| pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; |
| return NULL; |
| } else if (!strcmp(str, "noioapicquirk")) { |
| noioapicquirk = 1; |
| return NULL; |
| } else if (!strcmp(str, "ioapicreroute")) { |
| if (noioapicreroute != -1) |
| noioapicreroute = 0; |
| return NULL; |
| } else if (!strcmp(str, "noioapicreroute")) { |
| if (noioapicreroute != -1) |
| noioapicreroute = 1; |
| return NULL; |
| } |
| return str; |
| } |
| |
| unsigned int pcibios_assign_all_busses(void) |
| { |
| return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0; |
| } |
| |
| #if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS) |
| static LIST_HEAD(dma_domain_list); |
| static DEFINE_SPINLOCK(dma_domain_list_lock); |
| |
| void add_dma_domain(struct dma_domain *domain) |
| { |
| spin_lock(&dma_domain_list_lock); |
| list_add(&domain->node, &dma_domain_list); |
| spin_unlock(&dma_domain_list_lock); |
| } |
| EXPORT_SYMBOL_GPL(add_dma_domain); |
| |
| void del_dma_domain(struct dma_domain *domain) |
| { |
| spin_lock(&dma_domain_list_lock); |
| list_del(&domain->node); |
| spin_unlock(&dma_domain_list_lock); |
| } |
| EXPORT_SYMBOL_GPL(del_dma_domain); |
| |
| static void set_dma_domain_ops(struct pci_dev *pdev) |
| { |
| struct dma_domain *domain; |
| |
| spin_lock(&dma_domain_list_lock); |
| list_for_each_entry(domain, &dma_domain_list, node) { |
| if (pci_domain_nr(pdev->bus) == domain->domain_nr) { |
| pdev->dev.dma_ops = domain->dma_ops; |
| break; |
| } |
| } |
| spin_unlock(&dma_domain_list_lock); |
| } |
| #else |
| static void set_dma_domain_ops(struct pci_dev *pdev) {} |
| #endif |
| |
| static void set_dev_domain_options(struct pci_dev *pdev) |
| { |
| if (is_vmd(pdev->bus)) |
| pdev->hotplug_user_indicators = 1; |
| } |
| |
| int pcibios_add_device(struct pci_dev *dev) |
| { |
| struct setup_data *data; |
| struct pci_setup_rom *rom; |
| u64 pa_data; |
| |
| pa_data = boot_params.hdr.setup_data; |
| while (pa_data) { |
| data = ioremap(pa_data, sizeof(*rom)); |
| if (!data) |
| return -ENOMEM; |
| |
| if (data->type == SETUP_PCI) { |
| rom = (struct pci_setup_rom *)data; |
| |
| if ((pci_domain_nr(dev->bus) == rom->segment) && |
| (dev->bus->number == rom->bus) && |
| (PCI_SLOT(dev->devfn) == rom->device) && |
| (PCI_FUNC(dev->devfn) == rom->function) && |
| (dev->vendor == rom->vendor) && |
| (dev->device == rom->devid)) { |
| dev->rom = pa_data + |
| offsetof(struct pci_setup_rom, romdata); |
| dev->romlen = rom->pcilen; |
| } |
| } |
| pa_data = data->next; |
| iounmap(data); |
| } |
| set_dma_domain_ops(dev); |
| set_dev_domain_options(dev); |
| return 0; |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| int err; |
| |
| if ((err = pci_enable_resources(dev, mask)) < 0) |
| return err; |
| |
| if (!pci_dev_msi_enabled(dev)) |
| return pcibios_enable_irq(dev); |
| return 0; |
| } |
| |
| void pcibios_disable_device (struct pci_dev *dev) |
| { |
| if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq) |
| pcibios_disable_irq(dev); |
| } |
| |
| #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC |
| void pcibios_release_device(struct pci_dev *dev) |
| { |
| if (atomic_dec_return(&dev->enable_cnt) >= 0) |
| pcibios_disable_device(dev); |
| |
| } |
| #endif |
| |
| int pci_ext_cfg_avail(void) |
| { |
| if (raw_pci_ext_ops) |
| return 1; |
| else |
| return 0; |
| } |