| // SPDX-License-Identifier: GPL-2.0-or-later |
| |
| #include <linux/sched/task.h> |
| #include <linux/sched/signal.h> |
| #include <linux/freezer.h> |
| |
| #include "futex.h" |
| |
| /* |
| * READ this before attempting to hack on futexes! |
| * |
| * Basic futex operation and ordering guarantees |
| * ============================================= |
| * |
| * The waiter reads the futex value in user space and calls |
| * futex_wait(). This function computes the hash bucket and acquires |
| * the hash bucket lock. After that it reads the futex user space value |
| * again and verifies that the data has not changed. If it has not changed |
| * it enqueues itself into the hash bucket, releases the hash bucket lock |
| * and schedules. |
| * |
| * The waker side modifies the user space value of the futex and calls |
| * futex_wake(). This function computes the hash bucket and acquires the |
| * hash bucket lock. Then it looks for waiters on that futex in the hash |
| * bucket and wakes them. |
| * |
| * In futex wake up scenarios where no tasks are blocked on a futex, taking |
| * the hb spinlock can be avoided and simply return. In order for this |
| * optimization to work, ordering guarantees must exist so that the waiter |
| * being added to the list is acknowledged when the list is concurrently being |
| * checked by the waker, avoiding scenarios like the following: |
| * |
| * CPU 0 CPU 1 |
| * val = *futex; |
| * sys_futex(WAIT, futex, val); |
| * futex_wait(futex, val); |
| * uval = *futex; |
| * *futex = newval; |
| * sys_futex(WAKE, futex); |
| * futex_wake(futex); |
| * if (queue_empty()) |
| * return; |
| * if (uval == val) |
| * lock(hash_bucket(futex)); |
| * queue(); |
| * unlock(hash_bucket(futex)); |
| * schedule(); |
| * |
| * This would cause the waiter on CPU 0 to wait forever because it |
| * missed the transition of the user space value from val to newval |
| * and the waker did not find the waiter in the hash bucket queue. |
| * |
| * The correct serialization ensures that a waiter either observes |
| * the changed user space value before blocking or is woken by a |
| * concurrent waker: |
| * |
| * CPU 0 CPU 1 |
| * val = *futex; |
| * sys_futex(WAIT, futex, val); |
| * futex_wait(futex, val); |
| * |
| * waiters++; (a) |
| * smp_mb(); (A) <-- paired with -. |
| * | |
| * lock(hash_bucket(futex)); | |
| * | |
| * uval = *futex; | |
| * | *futex = newval; |
| * | sys_futex(WAKE, futex); |
| * | futex_wake(futex); |
| * | |
| * `--------> smp_mb(); (B) |
| * if (uval == val) |
| * queue(); |
| * unlock(hash_bucket(futex)); |
| * schedule(); if (waiters) |
| * lock(hash_bucket(futex)); |
| * else wake_waiters(futex); |
| * waiters--; (b) unlock(hash_bucket(futex)); |
| * |
| * Where (A) orders the waiters increment and the futex value read through |
| * atomic operations (see futex_hb_waiters_inc) and where (B) orders the write |
| * to futex and the waiters read (see futex_hb_waiters_pending()). |
| * |
| * This yields the following case (where X:=waiters, Y:=futex): |
| * |
| * X = Y = 0 |
| * |
| * w[X]=1 w[Y]=1 |
| * MB MB |
| * r[Y]=y r[X]=x |
| * |
| * Which guarantees that x==0 && y==0 is impossible; which translates back into |
| * the guarantee that we cannot both miss the futex variable change and the |
| * enqueue. |
| * |
| * Note that a new waiter is accounted for in (a) even when it is possible that |
| * the wait call can return error, in which case we backtrack from it in (b). |
| * Refer to the comment in futex_q_lock(). |
| * |
| * Similarly, in order to account for waiters being requeued on another |
| * address we always increment the waiters for the destination bucket before |
| * acquiring the lock. It then decrements them again after releasing it - |
| * the code that actually moves the futex(es) between hash buckets (requeue_futex) |
| * will do the additional required waiter count housekeeping. This is done for |
| * double_lock_hb() and double_unlock_hb(), respectively. |
| */ |
| |
| bool __futex_wake_mark(struct futex_q *q) |
| { |
| if (WARN(q->pi_state || q->rt_waiter, "refusing to wake PI futex\n")) |
| return false; |
| |
| __futex_unqueue(q); |
| /* |
| * The waiting task can free the futex_q as soon as q->lock_ptr = NULL |
| * is written, without taking any locks. This is possible in the event |
| * of a spurious wakeup, for example. A memory barrier is required here |
| * to prevent the following store to lock_ptr from getting ahead of the |
| * plist_del in __futex_unqueue(). |
| */ |
| smp_store_release(&q->lock_ptr, NULL); |
| |
| return true; |
| } |
| |
| /* |
| * The hash bucket lock must be held when this is called. |
| * Afterwards, the futex_q must not be accessed. Callers |
| * must ensure to later call wake_up_q() for the actual |
| * wakeups to occur. |
| */ |
| void futex_wake_mark(struct wake_q_head *wake_q, struct futex_q *q) |
| { |
| struct task_struct *p = q->task; |
| |
| get_task_struct(p); |
| |
| if (!__futex_wake_mark(q)) { |
| put_task_struct(p); |
| return; |
| } |
| |
| /* |
| * Queue the task for later wakeup for after we've released |
| * the hb->lock. |
| */ |
| wake_q_add_safe(wake_q, p); |
| } |
| |
| /* |
| * Wake up waiters matching bitset queued on this futex (uaddr). |
| */ |
| int futex_wake(u32 __user *uaddr, unsigned int flags, int nr_wake, u32 bitset) |
| { |
| struct futex_hash_bucket *hb; |
| struct futex_q *this, *next; |
| union futex_key key = FUTEX_KEY_INIT; |
| DEFINE_WAKE_Q(wake_q); |
| int ret; |
| |
| if (!bitset) |
| return -EINVAL; |
| |
| ret = get_futex_key(uaddr, flags, &key, FUTEX_READ); |
| if (unlikely(ret != 0)) |
| return ret; |
| |
| if ((flags & FLAGS_STRICT) && !nr_wake) |
| return 0; |
| |
| hb = futex_hash(&key); |
| |
| /* Make sure we really have tasks to wakeup */ |
| if (!futex_hb_waiters_pending(hb)) |
| return ret; |
| |
| spin_lock(&hb->lock); |
| |
| plist_for_each_entry_safe(this, next, &hb->chain, list) { |
| if (futex_match (&this->key, &key)) { |
| if (this->pi_state || this->rt_waiter) { |
| ret = -EINVAL; |
| break; |
| } |
| |
| /* Check if one of the bits is set in both bitsets */ |
| if (!(this->bitset & bitset)) |
| continue; |
| |
| this->wake(&wake_q, this); |
| if (++ret >= nr_wake) |
| break; |
| } |
| } |
| |
| spin_unlock(&hb->lock); |
| wake_up_q(&wake_q); |
| return ret; |
| } |
| |
| static int futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr) |
| { |
| unsigned int op = (encoded_op & 0x70000000) >> 28; |
| unsigned int cmp = (encoded_op & 0x0f000000) >> 24; |
| int oparg = sign_extend32((encoded_op & 0x00fff000) >> 12, 11); |
| int cmparg = sign_extend32(encoded_op & 0x00000fff, 11); |
| int oldval, ret; |
| |
| if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) { |
| if (oparg < 0 || oparg > 31) { |
| char comm[sizeof(current->comm)]; |
| /* |
| * kill this print and return -EINVAL when userspace |
| * is sane again |
| */ |
| pr_info_ratelimited("futex_wake_op: %s tries to shift op by %d; fix this program\n", |
| get_task_comm(comm, current), oparg); |
| oparg &= 31; |
| } |
| oparg = 1 << oparg; |
| } |
| |
| pagefault_disable(); |
| ret = arch_futex_atomic_op_inuser(op, oparg, &oldval, uaddr); |
| pagefault_enable(); |
| if (ret) |
| return ret; |
| |
| switch (cmp) { |
| case FUTEX_OP_CMP_EQ: |
| return oldval == cmparg; |
| case FUTEX_OP_CMP_NE: |
| return oldval != cmparg; |
| case FUTEX_OP_CMP_LT: |
| return oldval < cmparg; |
| case FUTEX_OP_CMP_GE: |
| return oldval >= cmparg; |
| case FUTEX_OP_CMP_LE: |
| return oldval <= cmparg; |
| case FUTEX_OP_CMP_GT: |
| return oldval > cmparg; |
| default: |
| return -ENOSYS; |
| } |
| } |
| |
| /* |
| * Wake up all waiters hashed on the physical page that is mapped |
| * to this virtual address: |
| */ |
| int futex_wake_op(u32 __user *uaddr1, unsigned int flags, u32 __user *uaddr2, |
| int nr_wake, int nr_wake2, int op) |
| { |
| union futex_key key1 = FUTEX_KEY_INIT, key2 = FUTEX_KEY_INIT; |
| struct futex_hash_bucket *hb1, *hb2; |
| struct futex_q *this, *next; |
| int ret, op_ret; |
| DEFINE_WAKE_Q(wake_q); |
| |
| retry: |
| ret = get_futex_key(uaddr1, flags, &key1, FUTEX_READ); |
| if (unlikely(ret != 0)) |
| return ret; |
| ret = get_futex_key(uaddr2, flags, &key2, FUTEX_WRITE); |
| if (unlikely(ret != 0)) |
| return ret; |
| |
| hb1 = futex_hash(&key1); |
| hb2 = futex_hash(&key2); |
| |
| retry_private: |
| double_lock_hb(hb1, hb2); |
| op_ret = futex_atomic_op_inuser(op, uaddr2); |
| if (unlikely(op_ret < 0)) { |
| double_unlock_hb(hb1, hb2); |
| |
| if (!IS_ENABLED(CONFIG_MMU) || |
| unlikely(op_ret != -EFAULT && op_ret != -EAGAIN)) { |
| /* |
| * we don't get EFAULT from MMU faults if we don't have |
| * an MMU, but we might get them from range checking |
| */ |
| ret = op_ret; |
| return ret; |
| } |
| |
| if (op_ret == -EFAULT) { |
| ret = fault_in_user_writeable(uaddr2); |
| if (ret) |
| return ret; |
| } |
| |
| cond_resched(); |
| if (!(flags & FLAGS_SHARED)) |
| goto retry_private; |
| goto retry; |
| } |
| |
| plist_for_each_entry_safe(this, next, &hb1->chain, list) { |
| if (futex_match (&this->key, &key1)) { |
| if (this->pi_state || this->rt_waiter) { |
| ret = -EINVAL; |
| goto out_unlock; |
| } |
| this->wake(&wake_q, this); |
| if (++ret >= nr_wake) |
| break; |
| } |
| } |
| |
| if (op_ret > 0) { |
| op_ret = 0; |
| plist_for_each_entry_safe(this, next, &hb2->chain, list) { |
| if (futex_match (&this->key, &key2)) { |
| if (this->pi_state || this->rt_waiter) { |
| ret = -EINVAL; |
| goto out_unlock; |
| } |
| this->wake(&wake_q, this); |
| if (++op_ret >= nr_wake2) |
| break; |
| } |
| } |
| ret += op_ret; |
| } |
| |
| out_unlock: |
| double_unlock_hb(hb1, hb2); |
| wake_up_q(&wake_q); |
| return ret; |
| } |
| |
| static long futex_wait_restart(struct restart_block *restart); |
| |
| /** |
| * futex_wait_queue() - futex_queue() and wait for wakeup, timeout, or signal |
| * @hb: the futex hash bucket, must be locked by the caller |
| * @q: the futex_q to queue up on |
| * @timeout: the prepared hrtimer_sleeper, or null for no timeout |
| */ |
| void futex_wait_queue(struct futex_hash_bucket *hb, struct futex_q *q, |
| struct hrtimer_sleeper *timeout) |
| { |
| /* |
| * The task state is guaranteed to be set before another task can |
| * wake it. set_current_state() is implemented using smp_store_mb() and |
| * futex_queue() calls spin_unlock() upon completion, both serializing |
| * access to the hash list and forcing another memory barrier. |
| */ |
| set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE); |
| futex_queue(q, hb); |
| |
| /* Arm the timer */ |
| if (timeout) |
| hrtimer_sleeper_start_expires(timeout, HRTIMER_MODE_ABS); |
| |
| /* |
| * If we have been removed from the hash list, then another task |
| * has tried to wake us, and we can skip the call to schedule(). |
| */ |
| if (likely(!plist_node_empty(&q->list))) { |
| /* |
| * If the timer has already expired, current will already be |
| * flagged for rescheduling. Only call schedule if there |
| * is no timeout, or if it has yet to expire. |
| */ |
| if (!timeout || timeout->task) |
| schedule(); |
| } |
| __set_current_state(TASK_RUNNING); |
| } |
| |
| /** |
| * futex_unqueue_multiple - Remove various futexes from their hash bucket |
| * @v: The list of futexes to unqueue |
| * @count: Number of futexes in the list |
| * |
| * Helper to unqueue a list of futexes. This can't fail. |
| * |
| * Return: |
| * - >=0 - Index of the last futex that was awoken; |
| * - -1 - No futex was awoken |
| */ |
| int futex_unqueue_multiple(struct futex_vector *v, int count) |
| { |
| int ret = -1, i; |
| |
| for (i = 0; i < count; i++) { |
| if (!futex_unqueue(&v[i].q)) |
| ret = i; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * futex_wait_multiple_setup - Prepare to wait and enqueue multiple futexes |
| * @vs: The futex list to wait on |
| * @count: The size of the list |
| * @woken: Index of the last woken futex, if any. Used to notify the |
| * caller that it can return this index to userspace (return parameter) |
| * |
| * Prepare multiple futexes in a single step and enqueue them. This may fail if |
| * the futex list is invalid or if any futex was already awoken. On success the |
| * task is ready to interruptible sleep. |
| * |
| * Return: |
| * - 1 - One of the futexes was woken by another thread |
| * - 0 - Success |
| * - <0 - -EFAULT, -EWOULDBLOCK or -EINVAL |
| */ |
| int futex_wait_multiple_setup(struct futex_vector *vs, int count, int *woken) |
| { |
| struct futex_hash_bucket *hb; |
| bool retry = false; |
| int ret, i; |
| u32 uval; |
| |
| /* |
| * Enqueuing multiple futexes is tricky, because we need to enqueue |
| * each futex on the list before dealing with the next one to avoid |
| * deadlocking on the hash bucket. But, before enqueuing, we need to |
| * make sure that current->state is TASK_INTERRUPTIBLE, so we don't |
| * lose any wake events, which cannot be done before the get_futex_key |
| * of the next key, because it calls get_user_pages, which can sleep. |
| * Thus, we fetch the list of futexes keys in two steps, by first |
| * pinning all the memory keys in the futex key, and only then we read |
| * each key and queue the corresponding futex. |
| * |
| * Private futexes doesn't need to recalculate hash in retry, so skip |
| * get_futex_key() when retrying. |
| */ |
| retry: |
| for (i = 0; i < count; i++) { |
| if (!(vs[i].w.flags & FLAGS_SHARED) && retry) |
| continue; |
| |
| ret = get_futex_key(u64_to_user_ptr(vs[i].w.uaddr), |
| vs[i].w.flags, |
| &vs[i].q.key, FUTEX_READ); |
| |
| if (unlikely(ret)) |
| return ret; |
| } |
| |
| set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE); |
| |
| for (i = 0; i < count; i++) { |
| u32 __user *uaddr = (u32 __user *)(unsigned long)vs[i].w.uaddr; |
| struct futex_q *q = &vs[i].q; |
| u32 val = vs[i].w.val; |
| |
| hb = futex_q_lock(q); |
| ret = futex_get_value_locked(&uval, uaddr); |
| |
| if (!ret && uval == val) { |
| /* |
| * The bucket lock can't be held while dealing with the |
| * next futex. Queue each futex at this moment so hb can |
| * be unlocked. |
| */ |
| futex_queue(q, hb); |
| continue; |
| } |
| |
| futex_q_unlock(hb); |
| __set_current_state(TASK_RUNNING); |
| |
| /* |
| * Even if something went wrong, if we find out that a futex |
| * was woken, we don't return error and return this index to |
| * userspace |
| */ |
| *woken = futex_unqueue_multiple(vs, i); |
| if (*woken >= 0) |
| return 1; |
| |
| if (ret) { |
| /* |
| * If we need to handle a page fault, we need to do so |
| * without any lock and any enqueued futex (otherwise |
| * we could lose some wakeup). So we do it here, after |
| * undoing all the work done so far. In success, we |
| * retry all the work. |
| */ |
| if (get_user(uval, uaddr)) |
| return -EFAULT; |
| |
| retry = true; |
| goto retry; |
| } |
| |
| if (uval != val) |
| return -EWOULDBLOCK; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * futex_sleep_multiple - Check sleeping conditions and sleep |
| * @vs: List of futexes to wait for |
| * @count: Length of vs |
| * @to: Timeout |
| * |
| * Sleep if and only if the timeout hasn't expired and no futex on the list has |
| * been woken up. |
| */ |
| static void futex_sleep_multiple(struct futex_vector *vs, unsigned int count, |
| struct hrtimer_sleeper *to) |
| { |
| if (to && !to->task) |
| return; |
| |
| for (; count; count--, vs++) { |
| if (!READ_ONCE(vs->q.lock_ptr)) |
| return; |
| } |
| |
| schedule(); |
| } |
| |
| /** |
| * futex_wait_multiple - Prepare to wait on and enqueue several futexes |
| * @vs: The list of futexes to wait on |
| * @count: The number of objects |
| * @to: Timeout before giving up and returning to userspace |
| * |
| * Entry point for the FUTEX_WAIT_MULTIPLE futex operation, this function |
| * sleeps on a group of futexes and returns on the first futex that is |
| * wake, or after the timeout has elapsed. |
| * |
| * Return: |
| * - >=0 - Hint to the futex that was awoken |
| * - <0 - On error |
| */ |
| int futex_wait_multiple(struct futex_vector *vs, unsigned int count, |
| struct hrtimer_sleeper *to) |
| { |
| int ret, hint = 0; |
| |
| if (to) |
| hrtimer_sleeper_start_expires(to, HRTIMER_MODE_ABS); |
| |
| while (1) { |
| ret = futex_wait_multiple_setup(vs, count, &hint); |
| if (ret) { |
| if (ret > 0) { |
| /* A futex was woken during setup */ |
| ret = hint; |
| } |
| return ret; |
| } |
| |
| futex_sleep_multiple(vs, count, to); |
| |
| __set_current_state(TASK_RUNNING); |
| |
| ret = futex_unqueue_multiple(vs, count); |
| if (ret >= 0) |
| return ret; |
| |
| if (to && !to->task) |
| return -ETIMEDOUT; |
| else if (signal_pending(current)) |
| return -ERESTARTSYS; |
| /* |
| * The final case is a spurious wakeup, for |
| * which just retry. |
| */ |
| } |
| } |
| |
| /** |
| * futex_wait_setup() - Prepare to wait on a futex |
| * @uaddr: the futex userspace address |
| * @val: the expected value |
| * @flags: futex flags (FLAGS_SHARED, etc.) |
| * @q: the associated futex_q |
| * @hb: storage for hash_bucket pointer to be returned to caller |
| * |
| * Setup the futex_q and locate the hash_bucket. Get the futex value and |
| * compare it with the expected value. Handle atomic faults internally. |
| * Return with the hb lock held on success, and unlocked on failure. |
| * |
| * Return: |
| * - 0 - uaddr contains val and hb has been locked; |
| * - <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlocked |
| */ |
| int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags, |
| struct futex_q *q, struct futex_hash_bucket **hb) |
| { |
| u32 uval; |
| int ret; |
| |
| /* |
| * Access the page AFTER the hash-bucket is locked. |
| * Order is important: |
| * |
| * Userspace waiter: val = var; if (cond(val)) futex_wait(&var, val); |
| * Userspace waker: if (cond(var)) { var = new; futex_wake(&var); } |
| * |
| * The basic logical guarantee of a futex is that it blocks ONLY |
| * if cond(var) is known to be true at the time of blocking, for |
| * any cond. If we locked the hash-bucket after testing *uaddr, that |
| * would open a race condition where we could block indefinitely with |
| * cond(var) false, which would violate the guarantee. |
| * |
| * On the other hand, we insert q and release the hash-bucket only |
| * after testing *uaddr. This guarantees that futex_wait() will NOT |
| * absorb a wakeup if *uaddr does not match the desired values |
| * while the syscall executes. |
| */ |
| retry: |
| ret = get_futex_key(uaddr, flags, &q->key, FUTEX_READ); |
| if (unlikely(ret != 0)) |
| return ret; |
| |
| retry_private: |
| *hb = futex_q_lock(q); |
| |
| ret = futex_get_value_locked(&uval, uaddr); |
| |
| if (ret) { |
| futex_q_unlock(*hb); |
| |
| ret = get_user(uval, uaddr); |
| if (ret) |
| return ret; |
| |
| if (!(flags & FLAGS_SHARED)) |
| goto retry_private; |
| |
| goto retry; |
| } |
| |
| if (uval != val) { |
| futex_q_unlock(*hb); |
| ret = -EWOULDBLOCK; |
| } |
| |
| return ret; |
| } |
| |
| int __futex_wait(u32 __user *uaddr, unsigned int flags, u32 val, |
| struct hrtimer_sleeper *to, u32 bitset) |
| { |
| struct futex_q q = futex_q_init; |
| struct futex_hash_bucket *hb; |
| int ret; |
| |
| if (!bitset) |
| return -EINVAL; |
| |
| q.bitset = bitset; |
| |
| retry: |
| /* |
| * Prepare to wait on uaddr. On success, it holds hb->lock and q |
| * is initialized. |
| */ |
| ret = futex_wait_setup(uaddr, val, flags, &q, &hb); |
| if (ret) |
| return ret; |
| |
| /* futex_queue and wait for wakeup, timeout, or a signal. */ |
| futex_wait_queue(hb, &q, to); |
| |
| /* If we were woken (and unqueued), we succeeded, whatever. */ |
| if (!futex_unqueue(&q)) |
| return 0; |
| |
| if (to && !to->task) |
| return -ETIMEDOUT; |
| |
| /* |
| * We expect signal_pending(current), but we might be the |
| * victim of a spurious wakeup as well. |
| */ |
| if (!signal_pending(current)) |
| goto retry; |
| |
| return -ERESTARTSYS; |
| } |
| |
| int futex_wait(u32 __user *uaddr, unsigned int flags, u32 val, ktime_t *abs_time, u32 bitset) |
| { |
| struct hrtimer_sleeper timeout, *to; |
| struct restart_block *restart; |
| int ret; |
| |
| to = futex_setup_timer(abs_time, &timeout, flags, |
| current->timer_slack_ns); |
| |
| ret = __futex_wait(uaddr, flags, val, to, bitset); |
| |
| /* No timeout, nothing to clean up. */ |
| if (!to) |
| return ret; |
| |
| hrtimer_cancel(&to->timer); |
| destroy_hrtimer_on_stack(&to->timer); |
| |
| if (ret == -ERESTARTSYS) { |
| restart = ¤t->restart_block; |
| restart->futex.uaddr = uaddr; |
| restart->futex.val = val; |
| restart->futex.time = *abs_time; |
| restart->futex.bitset = bitset; |
| restart->futex.flags = flags | FLAGS_HAS_TIMEOUT; |
| |
| return set_restart_fn(restart, futex_wait_restart); |
| } |
| |
| return ret; |
| } |
| |
| static long futex_wait_restart(struct restart_block *restart) |
| { |
| u32 __user *uaddr = restart->futex.uaddr; |
| ktime_t t, *tp = NULL; |
| |
| if (restart->futex.flags & FLAGS_HAS_TIMEOUT) { |
| t = restart->futex.time; |
| tp = &t; |
| } |
| restart->fn = do_no_restart_syscall; |
| |
| return (long)futex_wait(uaddr, restart->futex.flags, |
| restart->futex.val, tp, restart->futex.bitset); |
| } |
| |