| /* |
| * Allwinner sunXi SoCs Security ID support. |
| * |
| * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl> |
| * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/module.h> |
| #include <linux/nvmem-provider.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/random.h> |
| |
| /* Registers and special values for doing register-based SID readout on H3 */ |
| #define SUN8I_SID_PRCTL 0x40 |
| #define SUN8I_SID_RDKEY 0x60 |
| |
| #define SUN8I_SID_OFFSET_MASK 0x1FF |
| #define SUN8I_SID_OFFSET_SHIFT 16 |
| #define SUN8I_SID_OP_LOCK (0xAC << 8) |
| #define SUN8I_SID_READ BIT(1) |
| |
| static struct nvmem_config econfig = { |
| .name = "sunxi-sid", |
| .read_only = true, |
| .stride = 4, |
| .word_size = 1, |
| }; |
| |
| struct sunxi_sid_cfg { |
| u32 value_offset; |
| u32 size; |
| bool need_register_readout; |
| }; |
| |
| struct sunxi_sid { |
| void __iomem *base; |
| u32 value_offset; |
| }; |
| |
| /* We read the entire key, due to a 32 bit read alignment requirement. Since we |
| * want to return the requested byte, this results in somewhat slower code and |
| * uses 4 times more reads as needed but keeps code simpler. Since the SID is |
| * only very rarely probed, this is not really an issue. |
| */ |
| static u8 sunxi_sid_read_byte(const struct sunxi_sid *sid, |
| const unsigned int offset) |
| { |
| u32 sid_key; |
| |
| sid_key = ioread32be(sid->base + round_down(offset, 4)); |
| sid_key >>= (offset % 4) * 8; |
| |
| return sid_key; /* Only return the last byte */ |
| } |
| |
| static int sunxi_sid_read(void *context, unsigned int offset, |
| void *val, size_t bytes) |
| { |
| struct sunxi_sid *sid = context; |
| u8 *buf = val; |
| |
| /* Offset the read operation to the real position of SID */ |
| offset += sid->value_offset; |
| |
| while (bytes--) |
| *buf++ = sunxi_sid_read_byte(sid, offset++); |
| |
| return 0; |
| } |
| |
| static int sun8i_sid_register_readout(const struct sunxi_sid *sid, |
| const unsigned int word) |
| { |
| u32 reg_val; |
| int ret; |
| |
| /* Set word, lock access, and set read command */ |
| reg_val = (word & SUN8I_SID_OFFSET_MASK) |
| << SUN8I_SID_OFFSET_SHIFT; |
| reg_val |= SUN8I_SID_OP_LOCK | SUN8I_SID_READ; |
| writel(reg_val, sid->base + SUN8I_SID_PRCTL); |
| |
| ret = readl_poll_timeout(sid->base + SUN8I_SID_PRCTL, reg_val, |
| !(reg_val & SUN8I_SID_READ), 100, 250000); |
| if (ret) |
| return ret; |
| |
| writel(0, sid->base + SUN8I_SID_PRCTL); |
| return 0; |
| } |
| |
| static int sunxi_sid_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct nvmem_device *nvmem; |
| struct sunxi_sid *sid; |
| int ret, i, size; |
| char *randomness; |
| const struct sunxi_sid_cfg *cfg; |
| |
| sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL); |
| if (!sid) |
| return -ENOMEM; |
| |
| cfg = of_device_get_match_data(dev); |
| if (!cfg) |
| return -EINVAL; |
| sid->value_offset = cfg->value_offset; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| sid->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(sid->base)) |
| return PTR_ERR(sid->base); |
| |
| size = cfg->size; |
| |
| if (cfg->need_register_readout) { |
| /* |
| * H3's SID controller have a bug that the value at 0x200 |
| * offset is not the correct value when the hardware is reseted. |
| * However, after doing a register-based read operation, the |
| * value become right. |
| * Do a full read operation here, but ignore its value |
| * (as it's more fast to read by direct MMIO value than |
| * with registers) |
| */ |
| for (i = 0; i < (size >> 2); i++) { |
| ret = sun8i_sid_register_readout(sid, i); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| econfig.size = size; |
| econfig.dev = dev; |
| econfig.reg_read = sunxi_sid_read; |
| econfig.priv = sid; |
| nvmem = nvmem_register(&econfig); |
| if (IS_ERR(nvmem)) |
| return PTR_ERR(nvmem); |
| |
| randomness = kzalloc(sizeof(u8) * (size), GFP_KERNEL); |
| if (!randomness) { |
| ret = -EINVAL; |
| goto err_unreg_nvmem; |
| } |
| |
| for (i = 0; i < size; i++) |
| randomness[i] = sunxi_sid_read_byte(sid, i); |
| |
| add_device_randomness(randomness, size); |
| kfree(randomness); |
| |
| platform_set_drvdata(pdev, nvmem); |
| |
| return 0; |
| |
| err_unreg_nvmem: |
| nvmem_unregister(nvmem); |
| return ret; |
| } |
| |
| static int sunxi_sid_remove(struct platform_device *pdev) |
| { |
| struct nvmem_device *nvmem = platform_get_drvdata(pdev); |
| |
| return nvmem_unregister(nvmem); |
| } |
| |
| static const struct sunxi_sid_cfg sun4i_a10_cfg = { |
| .size = 0x10, |
| }; |
| |
| static const struct sunxi_sid_cfg sun7i_a20_cfg = { |
| .size = 0x200, |
| }; |
| |
| static const struct sunxi_sid_cfg sun8i_h3_cfg = { |
| .value_offset = 0x200, |
| .size = 0x100, |
| .need_register_readout = true, |
| }; |
| |
| static const struct sunxi_sid_cfg sun50i_a64_cfg = { |
| .value_offset = 0x200, |
| .size = 0x100, |
| }; |
| |
| static const struct of_device_id sunxi_sid_of_match[] = { |
| { .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg }, |
| { .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg }, |
| { .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg }, |
| { .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg }, |
| {/* sentinel */}, |
| }; |
| MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); |
| |
| static struct platform_driver sunxi_sid_driver = { |
| .probe = sunxi_sid_probe, |
| .remove = sunxi_sid_remove, |
| .driver = { |
| .name = "eeprom-sunxi-sid", |
| .of_match_table = sunxi_sid_of_match, |
| }, |
| }; |
| module_platform_driver(sunxi_sid_driver); |
| |
| MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>"); |
| MODULE_DESCRIPTION("Allwinner sunxi security id driver"); |
| MODULE_LICENSE("GPL"); |