blob: db3d303093f619dce1db419d63cbe868fc78c98e [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2019 NXP.
*
*/
/dts-v1/;
#include "fsl-ls1046a.dtsi"
/ {
model = "LS1046A FRWY Board";
compatible = "fsl,ls1046a-frwy", "fsl,ls1046a";
aliases {
serial0 = &duart0;
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
};
chosen {
stdout-path = "serial0:115200n8";
};
sb_3v3: regulator-sb3v3 {
compatible = "regulator-fixed";
regulator-name = "LT8642SEV-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&duart2 {
status = "okay";
};
&duart3 {
status = "okay";
};
&i2c0 {
status = "okay";
i2c-mux@77 {
compatible = "nxp,pca9546";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
power-monitor@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
temperature-sensor@4c {
compatible = "nxp,sa56004";
reg = <0x4c>;
vcc-supply = <&sb_3v3>;
};
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
};
eeprom@52 {
compatible = "atmel,24c512";
reg = <0x52>;
};
eeprom@53 {
compatible = "atmel,24c512";
reg = <0x53>;
};
};
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NAND Flash */
ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
status = "okay";
nand@0,0 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x10000>;
};
};
&qspi {
status = "okay";
mt25qu512a0: flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
reg = <0>;
};
};
#include "fsl-ls1046-post.dtsi"
&fman0 {
ethernet@e0000 {
phy-handle = <&qsgmii_phy4>;
phy-connection-type = "qsgmii";
};
ethernet@e8000 {
phy-handle = <&qsgmii_phy2>;
phy-connection-type = "qsgmii";
};
ethernet@ea000 {
phy-handle = <&qsgmii_phy1>;
phy-connection-type = "qsgmii";
};
ethernet@f2000 {
phy-handle = <&qsgmii_phy3>;
phy-connection-type = "qsgmii";
};
mdio@fd000 {
qsgmii_phy1: ethernet-phy@1c {
reg = <0x1c>;
};
qsgmii_phy2: ethernet-phy@1d {
reg = <0x1d>;
};
qsgmii_phy3: ethernet-phy@1e {
reg = <0x1e>;
};
qsgmii_phy4: ethernet-phy@1f {
reg = <0x1f>;
};
};
};