blob: 2d1fe6c3797fffeb3b945278d48ed97adf30232b [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for LX2160AQDS
//
// Copyright 2018 NXP
/dts-v1/;
#include "fsl-lx2160a.dtsi"
/ {
model = "NXP Layerscape LX2160AQDS";
compatible = "fsl,lx2160a-qds", "fsl,lx2160a";
aliases {
crypto = &crypto;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
sb_3v3: regulator-sb3v3 {
compatible = "regulator-fixed";
regulator-name = "MC34717-3.3VSB";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&crypto {
status = "okay";
};
&dspi0 {
status = "okay";
dflash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
&dspi1 {
status = "okay";
dflash1: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
&dspi2 {
status = "okay";
dflash2: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
&esdhc0 {
status = "okay";
};
&esdhc1 {
status = "okay";
};
&fspi {
status = "okay";
mt35xu512aba0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
m25p,fast-read;
spi-max-frequency = <50000000>;
reg = <0>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <8>;
};
};
&i2c0 {
status = "okay";
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
power-monitor@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <500>;
};
power-monitor@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
temperature-sensor@4c {
compatible = "nxp,sa56004";
reg = <0x4c>;
vcc-supply = <&sb_3v3>;
};
temperature-sensor@4d {
compatible = "nxp,sa56004";
reg = <0x4d>;
vcc-supply = <&sb_3v3>;
};
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
};
};
};
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&sata2 {
status = "okay";
};
&sata3 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};