blob: e46faac1fe71fe8c8777110418703285840fd42b [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
* Copyright 2017-2018 NXP
* Dong Aisheng <aisheng.dong@nxp.com>
*/
#include <dt-bindings/clock/imx8-clock.h>
#include <dt-bindings/firmware/imx/rsrc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/pads-imx8qxp.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
ethernet0 = &fec1;
ethernet1 = &fec2;
gpio0 = &lsio_gpio0;
gpio1 = &lsio_gpio1;
gpio2 = &lsio_gpio2;
gpio3 = &lsio_gpio3;
gpio4 = &lsio_gpio4;
gpio5 = &lsio_gpio5;
gpio6 = &lsio_gpio6;
gpio7 = &lsio_gpio7;
i2c0 = &adma_i2c0;
i2c1 = &adma_i2c1;
i2c2 = &adma_i2c2;
i2c3 = &adma_i2c3;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
mu0 = &lsio_mu0;
mu1 = &lsio_mu1;
mu2 = &lsio_mu2;
mu3 = &lsio_mu3;
mu4 = &lsio_mu4;
serial0 = &adma_lpuart0;
serial1 = &adma_lpuart1;
serial2 = &adma_lpuart2;
serial3 = &adma_lpuart3;
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
/* We have 1 clusters with 4 Cortex-A35 cores */
A35_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
clocks = <&clk IMX_A35_CLK>;
operating-points-v2 = <&a35_opp_table>;
#cooling-cells = <2>;
};
A35_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
clocks = <&clk IMX_A35_CLK>;
operating-points-v2 = <&a35_opp_table>;
#cooling-cells = <2>;
};
A35_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
clocks = <&clk IMX_A35_CLK>;
operating-points-v2 = <&a35_opp_table>;
#cooling-cells = <2>;
};
A35_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
clocks = <&clk IMX_A35_CLK>;
operating-points-v2 = <&a35_opp_table>;
#cooling-cells = <2>;
};
A35_L2: l2-cache0 {
compatible = "cache";
};
};
a35_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <150000>;
opp-suspend;
};
};
gic: interrupt-controller@51a00000 {
compatible = "arm,gic-v3";
reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
<0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
dsp_reserved: dsp@92400000 {
reg = <0 0x92400000 0 0x2000000>;
no-map;
};
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
scu {
compatible = "fsl,imx-scu";
mbox-names = "tx0",
"rx0",
"gip3";
mboxes = <&lsio_mu1 0 0
&lsio_mu1 1 0
&lsio_mu1 3 3>;
clk: clock-controller {
compatible = "fsl,imx8qxp-clk";
#clock-cells = <1>;
clocks = <&xtal32k &xtal24m>;
clock-names = "xtal_32KHz", "xtal_24Mhz";
};
iomuxc: pinctrl {
compatible = "fsl,imx8qxp-iomuxc";
};
ocotp: imx8qx-ocotp {
compatible = "fsl,imx8qxp-scu-ocotp";
#address-cells = <1>;
#size-cells = <1>;
};
pd: imx8qx-pd {
compatible = "fsl,imx8qxp-scu-pd";
#power-domain-cells = <1>;
};
scu_key: scu-key {
compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
linux,keycodes = <KEY_POWER>;
status = "disabled";
};
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
watchdog {
compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
timeout-sec = <60>;
};
tsens: thermal-sensor {
compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
#thermal-sensor-cells = <1>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
};
xtal32k: clock-xtal32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xtal_32KHz";
};
xtal24m: clock-xtal24m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "xtal_24MHz";
};
adma_subsys: bus@59000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x59000000 0x0 0x59000000 0x2000000>;
adma_lpcg: clock-controller@59000000 {
compatible = "fsl,imx8qxp-lpcg-adma";
reg = <0x59000000 0x2000000>;
#clock-cells = <1>;
};
adma_dsp: dsp@596e8000 {
compatible = "fsl,imx8qxp-dsp";
reg = <0x596e8000 0x88000>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
clock-names = "ipg", "ocram", "core";
power-domains = <&pd IMX_SC_R_MU_13A>,
<&pd IMX_SC_R_MU_13B>,
<&pd IMX_SC_R_DSP>,
<&pd IMX_SC_R_DSP_RAM>;
mbox-names = "txdb0", "txdb1",
"rxdb0", "rxdb1";
mboxes = <&lsio_mu13 2 0>,
<&lsio_mu13 2 1>,
<&lsio_mu13 3 0>,
<&lsio_mu13 3 1>;
memory-region = <&dsp_reserved>;
status = "disabled";
};
adma_lpuart0: serial@5a060000 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a060000 0x1000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
clock-names = "ipg", "baud";
power-domains = <&pd IMX_SC_R_UART_0>;
status = "disabled";
};
adma_lpuart1: serial@5a070000 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a070000 0x1000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
clock-names = "ipg", "baud";
power-domains = <&pd IMX_SC_R_UART_1>;
status = "disabled";
};
adma_lpuart2: serial@5a080000 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a080000 0x1000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
clock-names = "ipg", "baud";
power-domains = <&pd IMX_SC_R_UART_2>;
status = "disabled";
};
adma_lpuart3: serial@5a090000 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a090000 0x1000>;
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
clock-names = "ipg", "baud";
power-domains = <&pd IMX_SC_R_UART_3>;
status = "disabled";
};
adma_i2c0: i2c@5a800000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a800000 0x4000>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_0>;
status = "disabled";
};
adma_i2c1: i2c@5a810000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a810000 0x4000>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_1>;
status = "disabled";
};
adma_i2c2: i2c@5a820000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a820000 0x4000>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_2>;
status = "disabled";
};
adma_i2c3: i2c@5a830000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a830000 0x4000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_3>;
status = "disabled";
};
};
conn_subsys: bus@5b000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
conn_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg-conn";
reg = <0x5b200000 0xb0000>;
#clock-cells = <1>;
};
usdhc1: mmc@5b010000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b010000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
clock-names = "ipg", "per", "ahb";
power-domains = <&pd IMX_SC_R_SDHC_0>;
status = "disabled";
};
usdhc2: mmc@5b020000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b020000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
clock-names = "ipg", "per", "ahb";
power-domains = <&pd IMX_SC_R_SDHC_1>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
status = "disabled";
};
usdhc3: mmc@5b030000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b030000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>;
clock-names = "ipg", "per", "ahb";
power-domains = <&pd IMX_SC_R_SDHC_2>;
status = "disabled";
};
fec1: ethernet@5b040000 {
compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
reg = <0x5b040000 0x10000>;
interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_0>;
status = "disabled";
};
fec2: ethernet@5b050000 {
compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
reg = <0x5b050000 0x10000>;
interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_1>;
status = "disabled";
};
};
ddr_subsyss: bus@5c000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
ddr-pmu@5c020000 {
compatible = "fsl,imx8-ddr-pmu";
reg = <0x5c020000 0x10000>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
lsio_subsys: bus@5d000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
lsio_gpio0: gpio@5d080000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d080000 0x10000>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_0>;
};
lsio_gpio1: gpio@5d090000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d090000 0x10000>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_1>;
};
lsio_gpio2: gpio@5d0a0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0a0000 0x10000>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_2>;
};
lsio_gpio3: gpio@5d0b0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0b0000 0x10000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_3>;
};
lsio_gpio4: gpio@5d0c0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0c0000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_4>;
};
lsio_gpio5: gpio@5d0d0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0d0000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_5>;
};
lsio_gpio6: gpio@5d0e0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0e0000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_6>;
};
lsio_gpio7: gpio@5d0f0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0f0000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_7>;
};
lsio_mu0: mailbox@5d1b0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1b0000 0x10000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_mu1: mailbox@5d1c0000 {
compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1c0000 0x10000>;
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
};
lsio_mu2: mailbox@5d1d0000 {
compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1d0000 0x10000>;
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_mu3: mailbox@5d1e0000 {
compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1e0000 0x10000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_mu4: mailbox@5d1f0000 {
compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1f0000 0x10000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_mu13: mailbox@5d280000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d280000 0x10000>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
power-domains = <&pd IMX_SC_R_MU_13A>;
};
lsio_lpcg: clock-controller@5d400000 {
compatible = "fsl,imx8qxp-lpcg-lsio";
reg = <0x5d400000 0x400000>;
#clock-cells = <1>;
};
};
thermal_zones: thermal-zones {
cpu-thermal0 {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
trips {
cpu_alert0: trip0 {
temperature = <107000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip1 {
temperature = <127000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
};