| /* |
| * linux/arch/sh/kernel/setup.c |
| * |
| * Copyright (C) 1999 Niibe Yutaka |
| * Copyright (C) 2002, 2003 Paul Mundt |
| */ |
| |
| /* |
| * This file handles the architecture-dependent parts of initialization |
| */ |
| |
| #include <linux/screen_info.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/initrd.h> |
| #include <linux/bootmem.h> |
| #include <linux/console.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| #include <linux/utsname.h> |
| #include <linux/cpu.h> |
| #include <linux/pfn.h> |
| #include <linux/fs.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/sections.h> |
| #include <asm/irq.h> |
| #include <asm/setup.h> |
| #include <asm/clock.h> |
| |
| #ifdef CONFIG_SH_KGDB |
| #include <asm/kgdb.h> |
| static int kgdb_parse_options(char *options); |
| #endif |
| extern void * __rd_start, * __rd_end; |
| /* |
| * Machine setup.. |
| */ |
| |
| /* |
| * Initialize loops_per_jiffy as 10000000 (1000MIPS). |
| * This value will be used at the very early stage of serial setup. |
| * The bigger value means no problem. |
| */ |
| struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, }; |
| #ifdef CONFIG_VT |
| struct screen_info screen_info; |
| #endif |
| |
| #if defined(CONFIG_SH_UNKNOWN) |
| struct sh_machine_vector sh_mv; |
| #endif |
| |
| extern int root_mountflags; |
| |
| #define MV_NAME_SIZE 32 |
| |
| static struct sh_machine_vector* __init get_mv_byname(const char* name); |
| |
| /* |
| * This is set up by the setup-routine at boot-time |
| */ |
| #define PARAM ((unsigned char *)empty_zero_page) |
| |
| #define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) |
| #define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) |
| #define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) |
| #define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) |
| #define INITRD_START (*(unsigned long *) (PARAM+0x010)) |
| #define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) |
| /* ... */ |
| #define COMMAND_LINE ((char *) (PARAM+0x100)) |
| |
| #define RAMDISK_IMAGE_START_MASK 0x07FF |
| #define RAMDISK_PROMPT_FLAG 0x8000 |
| #define RAMDISK_LOAD_FLAG 0x4000 |
| |
| static char command_line[COMMAND_LINE_SIZE] = { 0, }; |
| |
| static struct resource code_resource = { .name = "Kernel code", }; |
| static struct resource data_resource = { .name = "Kernel data", }; |
| |
| unsigned long memory_start, memory_end; |
| |
| static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], |
| struct sh_machine_vector** mvp, |
| unsigned long *mv_io_base) |
| { |
| char c = ' ', *to = command_line, *from = COMMAND_LINE; |
| int len = 0; |
| |
| /* Save unparsed command line copy for /proc/cmdline */ |
| memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); |
| saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; |
| |
| memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; |
| memory_end = memory_start + __MEMORY_SIZE; |
| |
| for (;;) { |
| /* |
| * "mem=XXX[kKmM]" defines a size of memory. |
| */ |
| if (c == ' ' && !memcmp(from, "mem=", 4)) { |
| if (to != command_line) |
| to--; |
| { |
| unsigned long mem_size; |
| |
| mem_size = memparse(from+4, &from); |
| memory_end = memory_start + mem_size; |
| } |
| } |
| |
| if (c == ' ' && !memcmp(from, "sh_mv=", 6)) { |
| char* mv_end; |
| char* mv_comma; |
| int mv_len; |
| if (to != command_line) |
| to--; |
| from += 6; |
| mv_end = strchr(from, ' '); |
| if (mv_end == NULL) |
| mv_end = from + strlen(from); |
| |
| mv_comma = strchr(from, ','); |
| if ((mv_comma != NULL) && (mv_comma < mv_end)) { |
| int ints[3]; |
| get_options(mv_comma+1, ARRAY_SIZE(ints), ints); |
| *mv_io_base = ints[1]; |
| mv_len = mv_comma - from; |
| } else { |
| mv_len = mv_end - from; |
| } |
| if (mv_len > (MV_NAME_SIZE-1)) |
| mv_len = MV_NAME_SIZE-1; |
| memcpy(mv_name, from, mv_len); |
| mv_name[mv_len] = '\0'; |
| from = mv_end; |
| |
| *mvp = get_mv_byname(mv_name); |
| } |
| |
| c = *(from++); |
| if (!c) |
| break; |
| if (COMMAND_LINE_SIZE <= ++len) |
| break; |
| *(to++) = c; |
| } |
| *to = '\0'; |
| *cmdline_p = command_line; |
| } |
| |
| static int __init sh_mv_setup(char **cmdline_p) |
| { |
| #ifdef CONFIG_SH_UNKNOWN |
| extern struct sh_machine_vector mv_unknown; |
| #endif |
| struct sh_machine_vector *mv = NULL; |
| char mv_name[MV_NAME_SIZE] = ""; |
| unsigned long mv_io_base = 0; |
| |
| parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base); |
| |
| #ifdef CONFIG_SH_UNKNOWN |
| if (mv == NULL) { |
| mv = &mv_unknown; |
| if (*mv_name != '\0') { |
| printk("Warning: Unsupported machine %s, using unknown\n", |
| mv_name); |
| } |
| } |
| sh_mv = *mv; |
| #endif |
| |
| /* |
| * Manually walk the vec, fill in anything that the board hasn't yet |
| * by hand, wrapping to the generic implementation. |
| */ |
| #define mv_set(elem) do { \ |
| if (!sh_mv.mv_##elem) \ |
| sh_mv.mv_##elem = generic_##elem; \ |
| } while (0) |
| |
| mv_set(inb); mv_set(inw); mv_set(inl); |
| mv_set(outb); mv_set(outw); mv_set(outl); |
| |
| mv_set(inb_p); mv_set(inw_p); mv_set(inl_p); |
| mv_set(outb_p); mv_set(outw_p); mv_set(outl_p); |
| |
| mv_set(insb); mv_set(insw); mv_set(insl); |
| mv_set(outsb); mv_set(outsw); mv_set(outsl); |
| |
| mv_set(readb); mv_set(readw); mv_set(readl); |
| mv_set(writeb); mv_set(writew); mv_set(writel); |
| |
| mv_set(ioport_map); |
| mv_set(ioport_unmap); |
| mv_set(irq_demux); |
| |
| #ifdef CONFIG_SH_UNKNOWN |
| __set_io_port_base(mv_io_base); |
| #endif |
| |
| if (!sh_mv.mv_nr_irqs) |
| sh_mv.mv_nr_irqs = NR_IRQS; |
| |
| return 0; |
| } |
| |
| void __init setup_arch(char **cmdline_p) |
| { |
| unsigned long bootmap_size; |
| unsigned long start_pfn, max_pfn, max_low_pfn; |
| |
| #ifdef CONFIG_CMDLINE_BOOL |
| strcpy(COMMAND_LINE, CONFIG_CMDLINE); |
| #endif |
| |
| ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); |
| |
| #ifdef CONFIG_BLK_DEV_RAM |
| rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; |
| rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); |
| rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); |
| #endif |
| |
| if (!MOUNT_ROOT_RDONLY) |
| root_mountflags &= ~MS_RDONLY; |
| init_mm.start_code = (unsigned long) _text; |
| init_mm.end_code = (unsigned long) _etext; |
| init_mm.end_data = (unsigned long) _edata; |
| init_mm.brk = (unsigned long) _end; |
| |
| code_resource.start = (unsigned long)virt_to_phys(_text); |
| code_resource.end = (unsigned long)virt_to_phys(_etext)-1; |
| data_resource.start = (unsigned long)virt_to_phys(_etext); |
| data_resource.end = (unsigned long)virt_to_phys(_edata)-1; |
| |
| sh_mv_setup(cmdline_p); |
| |
| |
| /* |
| * Find the highest page frame number we have available |
| */ |
| max_pfn = PFN_DOWN(__pa(memory_end)); |
| |
| /* |
| * Determine low and high memory ranges: |
| */ |
| max_low_pfn = max_pfn; |
| |
| /* |
| * Partially used pages are not usable - thus |
| * we are rounding upwards: |
| */ |
| start_pfn = PFN_UP(__pa(_end)); |
| |
| /* |
| * Find a proper area for the bootmem bitmap. After this |
| * bootstrap step all allocations (until the page allocator |
| * is intact) must be done via bootmem_alloc(). |
| */ |
| bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, |
| __MEMORY_START>>PAGE_SHIFT, |
| max_low_pfn); |
| /* |
| * Register fully available low RAM pages with the bootmem allocator. |
| */ |
| { |
| unsigned long curr_pfn, last_pfn, pages; |
| |
| /* |
| * We are rounding up the start address of usable memory: |
| */ |
| curr_pfn = PFN_UP(__MEMORY_START); |
| /* |
| * ... and at the end of the usable range downwards: |
| */ |
| last_pfn = PFN_DOWN(__pa(memory_end)); |
| |
| if (last_pfn > max_low_pfn) |
| last_pfn = max_low_pfn; |
| |
| pages = last_pfn - curr_pfn; |
| free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn), |
| PFN_PHYS(pages)); |
| } |
| |
| |
| /* |
| * Reserve the kernel text and |
| * Reserve the bootmem bitmap. We do this in two steps (first step |
| * was init_bootmem()), because this catches the (definitely buggy) |
| * case of us accidentally initializing the bootmem allocator with |
| * an invalid RAM area. |
| */ |
| reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE, |
| (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START); |
| |
| /* |
| * reserve physical page 0 - it's a special BIOS page on many boxes, |
| * enabling clean reboots, SMP operation, laptop functions. |
| */ |
| reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE); |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); |
| if (&__rd_start != &__rd_end) { |
| LOADER_TYPE = 1; |
| INITRD_START = PHYSADDR((unsigned long)&__rd_start) - |
| __MEMORY_START; |
| INITRD_SIZE = (unsigned long)&__rd_end - |
| (unsigned long)&__rd_start; |
| } |
| |
| if (LOADER_TYPE && INITRD_START) { |
| if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { |
| reserve_bootmem_node(NODE_DATA(0), INITRD_START + |
| __MEMORY_START, INITRD_SIZE); |
| initrd_start = INITRD_START + PAGE_OFFSET + |
| __MEMORY_START; |
| initrd_end = initrd_start + INITRD_SIZE; |
| } else { |
| printk("initrd extends beyond end of memory " |
| "(0x%08lx > 0x%08lx)\ndisabling initrd\n", |
| INITRD_START + INITRD_SIZE, |
| max_low_pfn << PAGE_SHIFT); |
| initrd_start = 0; |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_DUMMY_CONSOLE |
| conswitchp = &dummy_con; |
| #endif |
| |
| /* Perform the machine specific initialisation */ |
| if (likely(sh_mv.mv_setup)) |
| sh_mv.mv_setup(cmdline_p); |
| |
| paging_init(); |
| } |
| |
| struct sh_machine_vector* __init get_mv_byname(const char* name) |
| { |
| extern long __machvec_start, __machvec_end; |
| struct sh_machine_vector *all_vecs = |
| (struct sh_machine_vector *)&__machvec_start; |
| |
| int i, n = ((unsigned long)&__machvec_end |
| - (unsigned long)&__machvec_start)/ |
| sizeof(struct sh_machine_vector); |
| |
| for (i = 0; i < n; ++i) { |
| struct sh_machine_vector *mv = &all_vecs[i]; |
| if (mv == NULL) |
| continue; |
| if (strcasecmp(name, get_system_type()) == 0) { |
| return mv; |
| } |
| } |
| return NULL; |
| } |
| |
| static struct cpu cpu[NR_CPUS]; |
| |
| static int __init topology_init(void) |
| { |
| int cpu_id; |
| |
| for_each_possible_cpu(cpu_id) |
| register_cpu(&cpu[cpu_id], cpu_id); |
| |
| return 0; |
| } |
| |
| subsys_initcall(topology_init); |
| |
| static const char *cpu_name[] = { |
| [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", |
| [CPU_SH7604] = "SH7604", [CPU_SH7300] = "SH7300", |
| [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", |
| [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", |
| [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", |
| [CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750", |
| [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", |
| [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", |
| [CPU_SH7760] = "SH7760", [CPU_SH73180] = "SH73180", |
| [CPU_ST40RA] = "ST40RA", [CPU_ST40GX1] = "ST40GX1", |
| [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", |
| [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", |
| [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", |
| [CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722", |
| [CPU_SH_NONE] = "Unknown" |
| }; |
| |
| const char *get_cpu_subtype(void) |
| { |
| return cpu_name[boot_cpu_data.type]; |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ |
| static const char *cpu_flags[] = { |
| "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", |
| "ptea", "llsc", "l2", NULL |
| }; |
| |
| static void show_cpuflags(struct seq_file *m) |
| { |
| unsigned long i; |
| |
| seq_printf(m, "cpu flags\t:"); |
| |
| if (!cpu_data->flags) { |
| seq_printf(m, " %s\n", cpu_flags[0]); |
| return; |
| } |
| |
| for (i = 0; cpu_flags[i]; i++) |
| if ((cpu_data->flags & (1 << i))) |
| seq_printf(m, " %s", cpu_flags[i+1]); |
| |
| seq_printf(m, "\n"); |
| } |
| |
| static void show_cacheinfo(struct seq_file *m, const char *type, |
| struct cache_info info) |
| { |
| unsigned int cache_size; |
| |
| cache_size = info.ways * info.sets * info.linesz; |
| |
| seq_printf(m, "%s size\t: %2dKiB (%d-way)\n", |
| type, cache_size >> 10, info.ways); |
| } |
| |
| /* |
| * Get CPU information for use by the procfs. |
| */ |
| static int show_cpuinfo(struct seq_file *m, void *v) |
| { |
| unsigned int cpu = smp_processor_id(); |
| |
| if (!cpu && cpu_online(cpu)) |
| seq_printf(m, "machine\t\t: %s\n", get_system_type()); |
| |
| seq_printf(m, "processor\t: %d\n", cpu); |
| seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); |
| seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype()); |
| |
| show_cpuflags(m); |
| |
| seq_printf(m, "cache type\t: "); |
| |
| /* |
| * Check for what type of cache we have, we support both the |
| * unified cache on the SH-2 and SH-3, as well as the harvard |
| * style cache on the SH-4. |
| */ |
| if (boot_cpu_data.icache.flags & SH_CACHE_COMBINED) { |
| seq_printf(m, "unified\n"); |
| show_cacheinfo(m, "cache", boot_cpu_data.icache); |
| } else { |
| seq_printf(m, "split (harvard)\n"); |
| show_cacheinfo(m, "icache", boot_cpu_data.icache); |
| show_cacheinfo(m, "dcache", boot_cpu_data.dcache); |
| } |
| |
| /* Optional secondary cache */ |
| if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) |
| show_cacheinfo(m, "scache", boot_cpu_data.scache); |
| |
| seq_printf(m, "bogomips\t: %lu.%02lu\n", |
| boot_cpu_data.loops_per_jiffy/(500000/HZ), |
| (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100); |
| |
| return show_clocks(m); |
| } |
| |
| static void *c_start(struct seq_file *m, loff_t *pos) |
| { |
| return *pos < NR_CPUS ? cpu_data + *pos : NULL; |
| } |
| static void *c_next(struct seq_file *m, void *v, loff_t *pos) |
| { |
| ++*pos; |
| return c_start(m, pos); |
| } |
| static void c_stop(struct seq_file *m, void *v) |
| { |
| } |
| struct seq_operations cpuinfo_op = { |
| .start = c_start, |
| .next = c_next, |
| .stop = c_stop, |
| .show = show_cpuinfo, |
| }; |
| #endif /* CONFIG_PROC_FS */ |
| |
| #ifdef CONFIG_SH_KGDB |
| /* |
| * Parse command-line kgdb options. By default KGDB is enabled, |
| * entered on error (or other action) using default serial info. |
| * The command-line option can include a serial port specification |
| * and an action to override default or configured behavior. |
| */ |
| struct kgdb_sermap kgdb_sci_sermap = |
| { "ttySC", 5, kgdb_sci_setup, NULL }; |
| |
| struct kgdb_sermap *kgdb_serlist = &kgdb_sci_sermap; |
| struct kgdb_sermap *kgdb_porttype = &kgdb_sci_sermap; |
| |
| void kgdb_register_sermap(struct kgdb_sermap *map) |
| { |
| struct kgdb_sermap *last; |
| |
| for (last = kgdb_serlist; last->next; last = last->next) |
| ; |
| last->next = map; |
| if (!map->namelen) { |
| map->namelen = strlen(map->name); |
| } |
| } |
| |
| static int __init kgdb_parse_options(char *options) |
| { |
| char c; |
| int baud; |
| |
| /* Check for port spec (or use default) */ |
| |
| /* Determine port type and instance */ |
| if (!memcmp(options, "tty", 3)) { |
| struct kgdb_sermap *map = kgdb_serlist; |
| |
| while (map && memcmp(options, map->name, map->namelen)) |
| map = map->next; |
| |
| if (!map) { |
| KGDB_PRINTK("unknown port spec in %s\n", options); |
| return -1; |
| } |
| |
| kgdb_porttype = map; |
| kgdb_serial_setup = map->setup_fn; |
| kgdb_portnum = options[map->namelen] - '0'; |
| options += map->namelen + 1; |
| |
| options = (*options == ',') ? options+1 : options; |
| |
| /* Read optional parameters (baud/parity/bits) */ |
| baud = simple_strtoul(options, &options, 10); |
| if (baud != 0) { |
| kgdb_baud = baud; |
| |
| c = toupper(*options); |
| if (c == 'E' || c == 'O' || c == 'N') { |
| kgdb_parity = c; |
| options++; |
| } |
| |
| c = *options; |
| if (c == '7' || c == '8') { |
| kgdb_bits = c; |
| options++; |
| } |
| options = (*options == ',') ? options+1 : options; |
| } |
| } |
| |
| /* Check for action specification */ |
| if (!memcmp(options, "halt", 4)) { |
| kgdb_halt = 1; |
| options += 4; |
| } else if (!memcmp(options, "disabled", 8)) { |
| kgdb_enabled = 0; |
| options += 8; |
| } |
| |
| if (*options) { |
| KGDB_PRINTK("ignored unknown options: %s\n", options); |
| return 0; |
| } |
| return 1; |
| } |
| __setup("kgdb=", kgdb_parse_options); |
| #endif /* CONFIG_SH_KGDB */ |