drivers/iio/pressure/abp060mg.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2016 - Marcin Malagowski <mrc@bourne.st>
  */
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/iio/iio.h>

 #define ABP060MG_ERROR_MASK   0xC000
 #define ABP060MG_RESP_TIME_MS 40
 #define ABP060MG_MIN_COUNTS   1638  /* = 0x0666 (10% of u14) */
 #define ABP060MG_MAX_COUNTS   14745 /* = 0x3999 (90% of u14) */
 #define ABP060MG_NUM_COUNTS   (ABP060MG_MAX_COUNTS - ABP060MG_MIN_COUNTS)

 enum abp_variant {
 	/* gage [kPa] */
 	ABP006KG, ABP010KG, ABP016KG, ABP025KG, ABP040KG, ABP060KG, ABP100KG,
 	ABP160KG, ABP250KG, ABP400KG, ABP600KG, ABP001GG,
 	/* differential [kPa] */
 	ABP006KD, ABP010KD, ABP016KD, ABP025KD, ABP040KD, ABP060KD, ABP100KD,
 	ABP160KD, ABP250KD, ABP400KD,
 	/* gage [psi] */
 	ABP001PG, ABP005PG, ABP015PG, ABP030PG, ABP060PG, ABP100PG, ABP150PG,
 	/* differential [psi] */
 	ABP001PD, ABP005PD, ABP015PD, ABP030PD, ABP060PD,
 };

 struct abp_config {
 	int min;
 	int max;
 };

 static struct abp_config abp_config[] = {
 	/* mbar & kPa variants */
 	[ABP006KG] = { .min =       0, .max =     6000 },
 	[ABP010KG] = { .min =       0, .max =    10000 },
 	[ABP016KG] = { .min =       0, .max =    16000 },
 	[ABP025KG] = { .min =       0, .max =    25000 },
 	[ABP040KG] = { .min =       0, .max =    40000 },
 	[ABP060KG] = { .min =       0, .max =    60000 },
 	[ABP100KG] = { .min =       0, .max =   100000 },
 	[ABP160KG] = { .min =       0, .max =   160000 },
 	[ABP250KG] = { .min =       0, .max =   250000 },
 	[ABP400KG] = { .min =       0, .max =   400000 },
 	[ABP600KG] = { .min =       0, .max =   600000 },
 	[ABP001GG] = { .min =       0, .max =  1000000 },
 	[ABP006KD] = { .min =   -6000, .max =     6000 },
 	[ABP010KD] = { .min =  -10000, .max =    10000 },
 	[ABP016KD] = { .min =  -16000, .max =    16000 },
 	[ABP025KD] = { .min =  -25000, .max =    25000 },
 	[ABP040KD] = { .min =  -40000, .max =    40000 },
 	[ABP060KD] = { .min =  -60000, .max =    60000 },
 	[ABP100KD] = { .min = -100000, .max =   100000 },
 	[ABP160KD] = { .min = -160000, .max =   160000 },
 	[ABP250KD] = { .min = -250000, .max =   250000 },
 	[ABP400KD] = { .min = -400000, .max =   400000 },
 	/* psi variants (1 psi ~ 6895 Pa) */
 	[ABP001PG] = { .min =       0, .max =     6985 },
 	[ABP005PG] = { .min =       0, .max =    34474 },
 	[ABP015PG] = { .min =       0, .max =   103421 },
 	[ABP030PG] = { .min =       0, .max =   206843 },
 	[ABP060PG] = { .min =       0, .max =   413686 },
 	[ABP100PG] = { .min =       0, .max =   689476 },
 	[ABP150PG] = { .min =       0, .max =  1034214 },
 	[ABP001PD] = { .min =   -6895, .max =     6895 },
 	[ABP005PD] = { .min =  -34474, .max =    34474 },
 	[ABP015PD] = { .min = -103421, .max =   103421 },
 	[ABP030PD] = { .min = -206843, .max =   206843 },
 	[ABP060PD] = { .min = -413686, .max =   413686 },
 };

 struct abp_state {
 	struct i2c_client *client;
 	struct mutex lock;

 	/*
 	 * bus-dependent MEASURE_REQUEST length.
 	 * If no SMBUS_QUICK support, need to send dummy byte
 	 */
 	int mreq_len;

 	/* model-dependent values (calculated on probe) */
 	int scale;
 	int offset;
 };

 static const struct iio_chan_spec abp060mg_channels[] = {
 	{
 		.type = IIO_PRESSURE,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 			BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE),
 	},
 };

 static int abp060mg_get_measurement(struct abp_state *state, int *val)
 {
 	struct i2c_client *client = state->client;
 	__be16 buf[2];
 	u16 pressure;
 	int ret;

 	buf[0] = 0;
 	ret = i2c_master_send(client, (u8 *)&buf, state->mreq_len);
 	if (ret < 0)
 		return ret;

 	msleep_interruptible(ABP060MG_RESP_TIME_MS);

 	ret = i2c_master_recv(client, (u8 *)&buf, sizeof(buf));
 	if (ret < 0)
 		return ret;

 	pressure = be16_to_cpu(buf[0]);
 	if (pressure & ABP060MG_ERROR_MASK)
 		return -EIO;

 	if (pressure < ABP060MG_MIN_COUNTS || pressure > ABP060MG_MAX_COUNTS)
 		return -EIO;

 	*val = pressure;

 	return IIO_VAL_INT;
 }

 static int abp060mg_read_raw(struct iio_dev *indio_dev,
 			struct iio_chan_spec const *chan, int *val,
 			int *val2, long mask)
 {
 	struct abp_state *state = iio_priv(indio_dev);
 	int ret;

 	mutex_lock(&state->lock);

 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		ret = abp060mg_get_measurement(state, val);
 		break;
 	case IIO_CHAN_INFO_OFFSET:
 		*val = state->offset;
 		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		*val = state->scale;
 		*val2 = ABP060MG_NUM_COUNTS * 1000; /* to kPa */
 		ret = IIO_VAL_FRACTIONAL;
 		break;
 	default:
 		ret = -EINVAL;
 		break;
 	}

 	mutex_unlock(&state->lock);
 	return ret;
 }

 static const struct iio_info abp060mg_info = {
 	.read_raw = abp060mg_read_raw,
 };

 static void abp060mg_init_device(struct iio_dev *indio_dev, unsigned long id)
 {
 	struct abp_state *state = iio_priv(indio_dev);
 	struct abp_config *cfg = &abp_config[id];

 	state->scale = cfg->max - cfg->min;
 	state->offset = -ABP060MG_MIN_COUNTS;

 	if (cfg->min < 0) /* differential */
 		state->offset -= ABP060MG_NUM_COUNTS >> 1;
 }

 static int abp060mg_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct iio_dev *indio_dev;
 	struct abp_state *state;
 	unsigned long cfg_id = id->driver_data;

 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state));
 	if (!indio_dev)
 		return -ENOMEM;

 	state = iio_priv(indio_dev);
 	i2c_set_clientdata(client, state);
 	state->client = client;

 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_QUICK))
 		state->mreq_len = 1;

 	abp060mg_init_device(indio_dev, cfg_id);

 	indio_dev->dev.parent = &client->dev;
 	indio_dev->name = dev_name(&client->dev);
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &abp060mg_info;

 	indio_dev->channels = abp060mg_channels;
 	indio_dev->num_channels = ARRAY_SIZE(abp060mg_channels);

 	mutex_init(&state->lock);

 	return devm_iio_device_register(&client->dev, indio_dev);
 }

 static const struct i2c_device_id abp060mg_id_table[] = {
 	/* mbar & kPa variants (abp060m [60 mbar] == abp006k [6 kPa]) */
 	/*    gage: */
 	{ "abp060mg", ABP006KG }, { "abp006kg", ABP006KG },
 	{ "abp100mg", ABP010KG }, { "abp010kg", ABP010KG },
 	{ "abp160mg", ABP016KG }, { "abp016kg", ABP016KG },
 	{ "abp250mg", ABP025KG }, { "abp025kg", ABP025KG },
 	{ "abp400mg", ABP040KG }, { "abp040kg", ABP040KG },
 	{ "abp600mg", ABP060KG }, { "abp060kg", ABP060KG },
 	{ "abp001bg", ABP100KG }, { "abp100kg", ABP100KG },
 	{ "abp1_6bg", ABP160KG }, { "abp160kg", ABP160KG },
 	{ "abp2_5bg", ABP250KG }, { "abp250kg", ABP250KG },
 	{ "abp004bg", ABP400KG }, { "abp400kg", ABP400KG },
 	{ "abp006bg", ABP600KG }, { "abp600kg", ABP600KG },
 	{ "abp010bg", ABP001GG }, { "abp001gg", ABP001GG },
 	/*    differential: */
 	{ "abp060md", ABP006KD }, { "abp006kd", ABP006KD },
 	{ "abp100md", ABP010KD }, { "abp010kd", ABP010KD },
 	{ "abp160md", ABP016KD }, { "abp016kd", ABP016KD },
 	{ "abp250md", ABP025KD }, { "abp025kd", ABP025KD },
 	{ "abp400md", ABP040KD }, { "abp040kd", ABP040KD },
 	{ "abp600md", ABP060KD }, { "abp060kd", ABP060KD },
 	{ "abp001bd", ABP100KD }, { "abp100kd", ABP100KD },
 	{ "abp1_6bd", ABP160KD }, { "abp160kd", ABP160KD },
 	{ "abp2_5bd", ABP250KD }, { "abp250kd", ABP250KD },
 	{ "abp004bd", ABP400KD }, { "abp400kd", ABP400KD },
 	/* psi variants */
 	/*    gage: */
 	{ "abp001pg", ABP001PG },
 	{ "abp005pg", ABP005PG },
 	{ "abp015pg", ABP015PG },
 	{ "abp030pg", ABP030PG },
 	{ "abp060pg", ABP060PG },
 	{ "abp100pg", ABP100PG },
 	{ "abp150pg", ABP150PG },
 	/*    differential: */
 	{ "abp001pd", ABP001PD },
 	{ "abp005pd", ABP005PD },
 	{ "abp015pd", ABP015PD },
 	{ "abp030pd", ABP030PD },
 	{ "abp060pd", ABP060PD },
 	{ /* empty */ },
 };
 MODULE_DEVICE_TABLE(i2c, abp060mg_id_table);

 static struct i2c_driver abp060mg_driver = {
 	.driver = {
 		.name = "abp060mg",
 	},
 	.probe = abp060mg_probe,
 	.id_table = abp060mg_id_table,
 };
 module_i2c_driver(abp060mg_driver);

 MODULE_AUTHOR("Marcin Malagowski <mrc@bourne.st>");
 MODULE_DESCRIPTION("Honeywell ABP pressure sensor driver");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* Copyright (C) 2016 - Marcin Malagowski <mrc@bourne.st>
	*/
	#include <linux/delay.h>
	#include <linux/device.h>
	#include <linux/err.h>
	#include <linux/i2c.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/iio/iio.h>

	#define ABP060MG_ERROR_MASK 0xC000
	#define ABP060MG_RESP_TIME_MS 40
	#define ABP060MG_MIN_COUNTS 1638 /* = 0x0666 (10% of u14) */
	#define ABP060MG_MAX_COUNTS 14745 /* = 0x3999 (90% of u14) */
	#define ABP060MG_NUM_COUNTS (ABP060MG_MAX_COUNTS - ABP060MG_MIN_COUNTS)

	enum abp_variant {
	/* gage [kPa] */
	ABP006KG, ABP010KG, ABP016KG, ABP025KG, ABP040KG, ABP060KG, ABP100KG,
	ABP160KG, ABP250KG, ABP400KG, ABP600KG, ABP001GG,
	/* differential [kPa] */
	ABP006KD, ABP010KD, ABP016KD, ABP025KD, ABP040KD, ABP060KD, ABP100KD,
	ABP160KD, ABP250KD, ABP400KD,
	/* gage [psi] */
	ABP001PG, ABP005PG, ABP015PG, ABP030PG, ABP060PG, ABP100PG, ABP150PG,
	/* differential [psi] */
	ABP001PD, ABP005PD, ABP015PD, ABP030PD, ABP060PD,
	};

	struct abp_config {
	int min;
	int max;
	};

	static struct abp_config abp_config[] = {
	/* mbar & kPa variants */
	[ABP006KG] = { .min = 0, .max = 6000 },
	[ABP010KG] = { .min = 0, .max = 10000 },
	[ABP016KG] = { .min = 0, .max = 16000 },
	[ABP025KG] = { .min = 0, .max = 25000 },
	[ABP040KG] = { .min = 0, .max = 40000 },
	[ABP060KG] = { .min = 0, .max = 60000 },
	[ABP100KG] = { .min = 0, .max = 100000 },
	[ABP160KG] = { .min = 0, .max = 160000 },
	[ABP250KG] = { .min = 0, .max = 250000 },
	[ABP400KG] = { .min = 0, .max = 400000 },
	[ABP600KG] = { .min = 0, .max = 600000 },
	[ABP001GG] = { .min = 0, .max = 1000000 },
	[ABP006KD] = { .min = -6000, .max = 6000 },
	[ABP010KD] = { .min = -10000, .max = 10000 },
	[ABP016KD] = { .min = -16000, .max = 16000 },
	[ABP025KD] = { .min = -25000, .max = 25000 },
	[ABP040KD] = { .min = -40000, .max = 40000 },
	[ABP060KD] = { .min = -60000, .max = 60000 },
	[ABP100KD] = { .min = -100000, .max = 100000 },
	[ABP160KD] = { .min = -160000, .max = 160000 },
	[ABP250KD] = { .min = -250000, .max = 250000 },
	[ABP400KD] = { .min = -400000, .max = 400000 },
	/* psi variants (1 psi ~ 6895 Pa) */
	[ABP001PG] = { .min = 0, .max = 6985 },
	[ABP005PG] = { .min = 0, .max = 34474 },
	[ABP015PG] = { .min = 0, .max = 103421 },
	[ABP030PG] = { .min = 0, .max = 206843 },
	[ABP060PG] = { .min = 0, .max = 413686 },
	[ABP100PG] = { .min = 0, .max = 689476 },
	[ABP150PG] = { .min = 0, .max = 1034214 },
	[ABP001PD] = { .min = -6895, .max = 6895 },
	[ABP005PD] = { .min = -34474, .max = 34474 },
	[ABP015PD] = { .min = -103421, .max = 103421 },
	[ABP030PD] = { .min = -206843, .max = 206843 },
	[ABP060PD] = { .min = -413686, .max = 413686 },
	};

	struct abp_state {
	struct i2c_client *client;
	struct mutex lock;

	/*
	* bus-dependent MEASURE_REQUEST length.
	* If no SMBUS_QUICK support, need to send dummy byte
	*/
	int mreq_len;

	/* model-dependent values (calculated on probe) */
	int scale;
	int offset;
	};

	static const struct iio_chan_spec abp060mg_channels[] = {
	{
	.type = IIO_PRESSURE,
	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \|
	BIT(IIO_CHAN_INFO_OFFSET) \| BIT(IIO_CHAN_INFO_SCALE),
	},
	};

	static int abp060mg_get_measurement(struct abp_state state, int val)
	{
	struct i2c_client *client = state->client;
	__be16 buf[2];
	u16 pressure;
	int ret;

	buf[0] = 0;
	ret = i2c_master_send(client, (u8 *)&buf, state->mreq_len);
	if (ret < 0)
	return ret;

	msleep_interruptible(ABP060MG_RESP_TIME_MS);

	ret = i2c_master_recv(client, (u8 *)&buf, sizeof(buf));
	if (ret < 0)
	return ret;

	pressure = be16_to_cpu(buf[0]);
	if (pressure & ABP060MG_ERROR_MASK)
	return -EIO;

	if (pressure < ABP060MG_MIN_COUNTS \|\| pressure > ABP060MG_MAX_COUNTS)
	return -EIO;

	*val = pressure;

	return IIO_VAL_INT;
	}

	static int abp060mg_read_raw(struct iio_dev *indio_dev,
	struct iio_chan_spec const chan, int val,
	int *val2, long mask)
	{
	struct abp_state *state = iio_priv(indio_dev);
	int ret;

	mutex_lock(&state->lock);

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
	ret = abp060mg_get_measurement(state, val);
	break;
	case IIO_CHAN_INFO_OFFSET:
	*val = state->offset;
	ret = IIO_VAL_INT;
	break;
	case IIO_CHAN_INFO_SCALE:
	*val = state->scale;
	val2 = ABP060MG_NUM_COUNTS 1000; /* to kPa */
	ret = IIO_VAL_FRACTIONAL;
	break;
	default:
	ret = -EINVAL;
	break;
	}

	mutex_unlock(&state->lock);
	return ret;
	}

	static const struct iio_info abp060mg_info = {
	.read_raw = abp060mg_read_raw,
	};

	static void abp060mg_init_device(struct iio_dev *indio_dev, unsigned long id)
	{
	struct abp_state *state = iio_priv(indio_dev);
	struct abp_config *cfg = &abp_config[id];

	state->scale = cfg->max - cfg->min;
	state->offset = -ABP060MG_MIN_COUNTS;

	if (cfg->min < 0) /* differential */
	state->offset -= ABP060MG_NUM_COUNTS >> 1;
	}

	static int abp060mg_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	struct iio_dev *indio_dev;
	struct abp_state *state;
	unsigned long cfg_id = id->driver_data;

	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state));
	if (!indio_dev)
	return -ENOMEM;

	state = iio_priv(indio_dev);
	i2c_set_clientdata(client, state);
	state->client = client;

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_QUICK))
	state->mreq_len = 1;

	abp060mg_init_device(indio_dev, cfg_id);

	indio_dev->dev.parent = &client->dev;
	indio_dev->name = dev_name(&client->dev);
	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->info = &abp060mg_info;

	indio_dev->channels = abp060mg_channels;
	indio_dev->num_channels = ARRAY_SIZE(abp060mg_channels);

	mutex_init(&state->lock);

	return devm_iio_device_register(&client->dev, indio_dev);
	}

	static const struct i2c_device_id abp060mg_id_table[] = {
	/* mbar & kPa variants (abp060m [60 mbar] == abp006k [6 kPa]) */
	/* gage: */
	{ "abp060mg", ABP006KG }, { "abp006kg", ABP006KG },
	{ "abp100mg", ABP010KG }, { "abp010kg", ABP010KG },
	{ "abp160mg", ABP016KG }, { "abp016kg", ABP016KG },
	{ "abp250mg", ABP025KG }, { "abp025kg", ABP025KG },
	{ "abp400mg", ABP040KG }, { "abp040kg", ABP040KG },
	{ "abp600mg", ABP060KG }, { "abp060kg", ABP060KG },
	{ "abp001bg", ABP100KG }, { "abp100kg", ABP100KG },
	{ "abp1_6bg", ABP160KG }, { "abp160kg", ABP160KG },
	{ "abp2_5bg", ABP250KG }, { "abp250kg", ABP250KG },
	{ "abp004bg", ABP400KG }, { "abp400kg", ABP400KG },
	{ "abp006bg", ABP600KG }, { "abp600kg", ABP600KG },
	{ "abp010bg", ABP001GG }, { "abp001gg", ABP001GG },
	/* differential: */
	{ "abp060md", ABP006KD }, { "abp006kd", ABP006KD },
	{ "abp100md", ABP010KD }, { "abp010kd", ABP010KD },
	{ "abp160md", ABP016KD }, { "abp016kd", ABP016KD },
	{ "abp250md", ABP025KD }, { "abp025kd", ABP025KD },
	{ "abp400md", ABP040KD }, { "abp040kd", ABP040KD },
	{ "abp600md", ABP060KD }, { "abp060kd", ABP060KD },
	{ "abp001bd", ABP100KD }, { "abp100kd", ABP100KD },
	{ "abp1_6bd", ABP160KD }, { "abp160kd", ABP160KD },
	{ "abp2_5bd", ABP250KD }, { "abp250kd", ABP250KD },
	{ "abp004bd", ABP400KD }, { "abp400kd", ABP400KD },
	/* psi variants */
	/* gage: */
	{ "abp001pg", ABP001PG },
	{ "abp005pg", ABP005PG },
	{ "abp015pg", ABP015PG },
	{ "abp030pg", ABP030PG },
	{ "abp060pg", ABP060PG },
	{ "abp100pg", ABP100PG },
	{ "abp150pg", ABP150PG },
	/* differential: */
	{ "abp001pd", ABP001PD },
	{ "abp005pd", ABP005PD },
	{ "abp015pd", ABP015PD },
	{ "abp030pd", ABP030PD },
	{ "abp060pd", ABP060PD },
	{ /* empty */ },
	};
	MODULE_DEVICE_TABLE(i2c, abp060mg_id_table);

	static struct i2c_driver abp060mg_driver = {
	.driver = {
	.name = "abp060mg",
	},
	.probe = abp060mg_probe,
	.id_table = abp060mg_id_table,
	};
	module_i2c_driver(abp060mg_driver);

	MODULE_AUTHOR("Marcin Malagowski <mrc@bourne.st>");
	MODULE_DESCRIPTION("Honeywell ABP pressure sensor driver");
	MODULE_LICENSE("GPL");