| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * RISC-V Specific Low-Level ACPI Boot Support |
| * |
| * Copyright (C) 2013-2014, Linaro Ltd. |
| * Author: Al Stone <al.stone@linaro.org> |
| * Author: Graeme Gregory <graeme.gregory@linaro.org> |
| * Author: Hanjun Guo <hanjun.guo@linaro.org> |
| * Author: Tomasz Nowicki <tomasz.nowicki@linaro.org> |
| * Author: Naresh Bhat <naresh.bhat@linaro.org> |
| * |
| * Copyright (C) 2021-2023, Ventana Micro Systems Inc. |
| * Author: Sunil V L <sunilvl@ventanamicro.com> |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/io.h> |
| #include <linux/pci.h> |
| #include <linux/efi.h> |
| |
| int acpi_noirq = 1; /* skip ACPI IRQ initialization */ |
| int acpi_disabled = 1; |
| EXPORT_SYMBOL(acpi_disabled); |
| |
| int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */ |
| EXPORT_SYMBOL(acpi_pci_disabled); |
| |
| static bool param_acpi_off __initdata; |
| static bool param_acpi_on __initdata; |
| static bool param_acpi_force __initdata; |
| |
| static struct acpi_madt_rintc cpu_madt_rintc[NR_CPUS]; |
| |
| static int __init parse_acpi(char *arg) |
| { |
| if (!arg) |
| return -EINVAL; |
| |
| /* "acpi=off" disables both ACPI table parsing and interpreter */ |
| if (strcmp(arg, "off") == 0) |
| param_acpi_off = true; |
| else if (strcmp(arg, "on") == 0) /* prefer ACPI over DT */ |
| param_acpi_on = true; |
| else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */ |
| param_acpi_force = true; |
| else |
| return -EINVAL; /* Core will print when we return error */ |
| |
| return 0; |
| } |
| early_param("acpi", parse_acpi); |
| |
| /* |
| * acpi_fadt_sanity_check() - Check FADT presence and carry out sanity |
| * checks on it |
| * |
| * Return 0 on success, <0 on failure |
| */ |
| static int __init acpi_fadt_sanity_check(void) |
| { |
| struct acpi_table_header *table; |
| struct acpi_table_fadt *fadt; |
| acpi_status status; |
| int ret = 0; |
| |
| /* |
| * FADT is required on riscv; retrieve it to check its presence |
| * and carry out revision and ACPI HW reduced compliancy tests |
| */ |
| status = acpi_get_table(ACPI_SIG_FADT, 0, &table); |
| if (ACPI_FAILURE(status)) { |
| const char *msg = acpi_format_exception(status); |
| |
| pr_err("Failed to get FADT table, %s\n", msg); |
| return -ENODEV; |
| } |
| |
| fadt = (struct acpi_table_fadt *)table; |
| |
| /* |
| * The revision in the table header is the FADT's Major revision. The |
| * FADT also has a minor revision, which is stored in the FADT itself. |
| * |
| * TODO: Currently, we check for 6.5 as the minimum version to check |
| * for HW_REDUCED flag. However, once RISC-V updates are released in |
| * the ACPI spec, we need to update this check for exact minor revision |
| */ |
| if (table->revision < 6 || (table->revision == 6 && fadt->minor_revision < 5)) |
| pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 6.5+\n", |
| table->revision, fadt->minor_revision); |
| |
| if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) { |
| pr_err("FADT not ACPI hardware reduced compliant\n"); |
| ret = -EINVAL; |
| } |
| |
| /* |
| * acpi_get_table() creates FADT table mapping that |
| * should be released after parsing and before resuming boot |
| */ |
| acpi_put_table(table); |
| return ret; |
| } |
| |
| /* |
| * acpi_boot_table_init() called from setup_arch(), always. |
| * 1. find RSDP and get its address, and then find XSDT |
| * 2. extract all tables and checksums them all |
| * 3. check ACPI FADT HW reduced flag |
| * |
| * We can parse ACPI boot-time tables such as MADT after |
| * this function is called. |
| * |
| * On return ACPI is enabled if either: |
| * |
| * - ACPI tables are initialized and sanity checks passed |
| * - acpi=force was passed in the command line and ACPI was not disabled |
| * explicitly through acpi=off command line parameter |
| * |
| * ACPI is disabled on function return otherwise |
| */ |
| void __init acpi_boot_table_init(void) |
| { |
| /* |
| * Enable ACPI instead of device tree unless |
| * - ACPI has been disabled explicitly (acpi=off), or |
| * - firmware has not populated ACPI ptr in EFI system table |
| * and ACPI has not been [force] enabled (acpi=on|force) |
| */ |
| if (param_acpi_off || |
| (!param_acpi_on && !param_acpi_force && |
| efi.acpi20 == EFI_INVALID_TABLE_ADDR)) |
| return; |
| |
| /* |
| * ACPI is disabled at this point. Enable it in order to parse |
| * the ACPI tables and carry out sanity checks |
| */ |
| enable_acpi(); |
| |
| /* |
| * If ACPI tables are initialized and FADT sanity checks passed, |
| * leave ACPI enabled and carry on booting; otherwise disable ACPI |
| * on initialization error. |
| * If acpi=force was passed on the command line it forces ACPI |
| * to be enabled even if its initialization failed. |
| */ |
| if (acpi_table_init() || acpi_fadt_sanity_check()) { |
| pr_err("Failed to init ACPI tables\n"); |
| if (!param_acpi_force) |
| disable_acpi(); |
| } |
| } |
| |
| static int acpi_parse_madt_rintc(union acpi_subtable_headers *header, const unsigned long end) |
| { |
| struct acpi_madt_rintc *rintc = (struct acpi_madt_rintc *)header; |
| int cpuid; |
| |
| if (!(rintc->flags & ACPI_MADT_ENABLED)) |
| return 0; |
| |
| cpuid = riscv_hartid_to_cpuid(rintc->hart_id); |
| /* |
| * When CONFIG_SMP is disabled, mapping won't be created for |
| * all cpus. |
| * CPUs more than num_possible_cpus, will be ignored. |
| */ |
| if (cpuid >= 0 && cpuid < num_possible_cpus()) |
| cpu_madt_rintc[cpuid] = *rintc; |
| |
| return 0; |
| } |
| |
| /* |
| * Instead of parsing (and freeing) the ACPI table, cache |
| * the RINTC structures since they are frequently used |
| * like in cpuinfo. |
| */ |
| void __init acpi_init_rintc_map(void) |
| { |
| if (acpi_table_parse_madt(ACPI_MADT_TYPE_RINTC, acpi_parse_madt_rintc, 0) <= 0) { |
| pr_err("No valid RINTC entries exist\n"); |
| BUG(); |
| } |
| } |
| |
| struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu) |
| { |
| return &cpu_madt_rintc[cpu]; |
| } |
| |
| u32 get_acpi_id_for_cpu(int cpu) |
| { |
| return acpi_cpu_get_madt_rintc(cpu)->uid; |
| } |
| |
| /* |
| * __acpi_map_table() will be called before paging_init(), so early_ioremap() |
| * or early_memremap() should be called here to for ACPI table mapping. |
| */ |
| void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size) |
| { |
| if (!size) |
| return NULL; |
| |
| return early_ioremap(phys, size); |
| } |
| |
| void __init __acpi_unmap_table(void __iomem *map, unsigned long size) |
| { |
| if (!map || !size) |
| return; |
| |
| early_iounmap(map, size); |
| } |
| |
| void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) |
| { |
| return (void __iomem *)memremap(phys, size, MEMREMAP_WB); |
| } |
| |
| #ifdef CONFIG_PCI |
| |
| /* |
| * These interfaces are defined just to enable building ACPI core. |
| * TODO: Update it with actual implementation when external interrupt |
| * controller support is added in RISC-V ACPI. |
| */ |
| int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, |
| int reg, int len, u32 *val) |
| { |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn, |
| int reg, int len, u32 val) |
| { |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| int acpi_pci_bus_find_domain_nr(struct pci_bus *bus) |
| { |
| return -1; |
| } |
| |
| struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) |
| { |
| return NULL; |
| } |
| #endif /* CONFIG_PCI */ |