| /* |
| * PowerPC version |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * |
| * Derived from "arch/m68k/kernel/ptrace.c" |
| * Copyright (C) 1994 by Hamish Macdonald |
| * Taken from linux/kernel/ptrace.c and modified for M680x0. |
| * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds |
| * |
| * Modified by Cort Dougan (cort@hq.fsmlabs.com) |
| * and Paul Mackerras (paulus@samba.org). |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file README.legal in the main directory of |
| * this archive for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/errno.h> |
| #include <linux/ptrace.h> |
| #include <linux/regset.h> |
| #include <linux/tracehook.h> |
| #include <linux/elf.h> |
| #include <linux/user.h> |
| #include <linux/security.h> |
| #include <linux/signal.h> |
| #include <linux/seccomp.h> |
| #include <linux/audit.h> |
| #ifdef CONFIG_PPC32 |
| #include <linux/module.h> |
| #endif |
| |
| #include <asm/uaccess.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/system.h> |
| |
| /* |
| * does not yet catch signals sent when the child dies. |
| * in exit.c or in signal.c. |
| */ |
| |
| /* |
| * Set of msr bits that gdb can change on behalf of a process. |
| */ |
| #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) |
| #define MSR_DEBUGCHANGE 0 |
| #else |
| #define MSR_DEBUGCHANGE (MSR_SE | MSR_BE) |
| #endif |
| |
| /* |
| * Max register writeable via put_reg |
| */ |
| #ifdef CONFIG_PPC32 |
| #define PT_MAX_PUT_REG PT_MQ |
| #else |
| #define PT_MAX_PUT_REG PT_CCR |
| #endif |
| |
| static unsigned long get_user_msr(struct task_struct *task) |
| { |
| return task->thread.regs->msr | task->thread.fpexc_mode; |
| } |
| |
| static int set_user_msr(struct task_struct *task, unsigned long msr) |
| { |
| task->thread.regs->msr &= ~MSR_DEBUGCHANGE; |
| task->thread.regs->msr |= msr & MSR_DEBUGCHANGE; |
| return 0; |
| } |
| |
| /* |
| * We prevent mucking around with the reserved area of trap |
| * which are used internally by the kernel. |
| */ |
| static int set_user_trap(struct task_struct *task, unsigned long trap) |
| { |
| task->thread.regs->trap = trap & 0xfff0; |
| return 0; |
| } |
| |
| /* |
| * Get contents of register REGNO in task TASK. |
| */ |
| unsigned long ptrace_get_reg(struct task_struct *task, int regno) |
| { |
| if (task->thread.regs == NULL) |
| return -EIO; |
| |
| if (regno == PT_MSR) |
| return get_user_msr(task); |
| |
| if (regno < (sizeof(struct pt_regs) / sizeof(unsigned long))) |
| return ((unsigned long *)task->thread.regs)[regno]; |
| |
| return -EIO; |
| } |
| |
| /* |
| * Write contents of register REGNO in task TASK. |
| */ |
| int ptrace_put_reg(struct task_struct *task, int regno, unsigned long data) |
| { |
| if (task->thread.regs == NULL) |
| return -EIO; |
| |
| if (regno == PT_MSR) |
| return set_user_msr(task, data); |
| if (regno == PT_TRAP) |
| return set_user_trap(task, data); |
| |
| if (regno <= PT_MAX_PUT_REG) { |
| ((unsigned long *)task->thread.regs)[regno] = data; |
| return 0; |
| } |
| return -EIO; |
| } |
| |
| static int gpr_get(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| void *kbuf, void __user *ubuf) |
| { |
| int ret; |
| |
| if (target->thread.regs == NULL) |
| return -EIO; |
| |
| CHECK_FULL_REGS(target->thread.regs); |
| |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, |
| target->thread.regs, |
| 0, offsetof(struct pt_regs, msr)); |
| if (!ret) { |
| unsigned long msr = get_user_msr(target); |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr, |
| offsetof(struct pt_regs, msr), |
| offsetof(struct pt_regs, msr) + |
| sizeof(msr)); |
| } |
| |
| BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) != |
| offsetof(struct pt_regs, msr) + sizeof(long)); |
| |
| if (!ret) |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, |
| &target->thread.regs->orig_gpr3, |
| offsetof(struct pt_regs, orig_gpr3), |
| sizeof(struct pt_regs)); |
| if (!ret) |
| ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, |
| sizeof(struct pt_regs), -1); |
| |
| return ret; |
| } |
| |
| static int gpr_set(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| const void *kbuf, const void __user *ubuf) |
| { |
| unsigned long reg; |
| int ret; |
| |
| if (target->thread.regs == NULL) |
| return -EIO; |
| |
| CHECK_FULL_REGS(target->thread.regs); |
| |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, |
| target->thread.regs, |
| 0, PT_MSR * sizeof(reg)); |
| |
| if (!ret && count > 0) { |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®, |
| PT_MSR * sizeof(reg), |
| (PT_MSR + 1) * sizeof(reg)); |
| if (!ret) |
| ret = set_user_msr(target, reg); |
| } |
| |
| BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) != |
| offsetof(struct pt_regs, msr) + sizeof(long)); |
| |
| if (!ret) |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, |
| &target->thread.regs->orig_gpr3, |
| PT_ORIG_R3 * sizeof(reg), |
| (PT_MAX_PUT_REG + 1) * sizeof(reg)); |
| |
| if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret) |
| ret = user_regset_copyin_ignore( |
| &pos, &count, &kbuf, &ubuf, |
| (PT_MAX_PUT_REG + 1) * sizeof(reg), |
| PT_TRAP * sizeof(reg)); |
| |
| if (!ret && count > 0) { |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®, |
| PT_TRAP * sizeof(reg), |
| (PT_TRAP + 1) * sizeof(reg)); |
| if (!ret) |
| ret = set_user_trap(target, reg); |
| } |
| |
| if (!ret) |
| ret = user_regset_copyin_ignore( |
| &pos, &count, &kbuf, &ubuf, |
| (PT_TRAP + 1) * sizeof(reg), -1); |
| |
| return ret; |
| } |
| |
| static int fpr_get(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| void *kbuf, void __user *ubuf) |
| { |
| #ifdef CONFIG_VSX |
| double buf[33]; |
| int i; |
| #endif |
| flush_fp_to_thread(target); |
| |
| #ifdef CONFIG_VSX |
| /* copy to local buffer then write that out */ |
| for (i = 0; i < 32 ; i++) |
| buf[i] = target->thread.TS_FPR(i); |
| memcpy(&buf[32], &target->thread.fpscr, sizeof(double)); |
| return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1); |
| |
| #else |
| BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) != |
| offsetof(struct thread_struct, TS_FPR(32))); |
| |
| return user_regset_copyout(&pos, &count, &kbuf, &ubuf, |
| &target->thread.fpr, 0, -1); |
| #endif |
| } |
| |
| static int fpr_set(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| const void *kbuf, const void __user *ubuf) |
| { |
| #ifdef CONFIG_VSX |
| double buf[33]; |
| int i; |
| #endif |
| flush_fp_to_thread(target); |
| |
| #ifdef CONFIG_VSX |
| /* copy to local buffer then write that out */ |
| i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1); |
| if (i) |
| return i; |
| for (i = 0; i < 32 ; i++) |
| target->thread.TS_FPR(i) = buf[i]; |
| memcpy(&target->thread.fpscr, &buf[32], sizeof(double)); |
| return 0; |
| #else |
| BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) != |
| offsetof(struct thread_struct, TS_FPR(32))); |
| |
| return user_regset_copyin(&pos, &count, &kbuf, &ubuf, |
| &target->thread.fpr, 0, -1); |
| #endif |
| } |
| |
| #ifdef CONFIG_ALTIVEC |
| /* |
| * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. |
| * The transfer totals 34 quadword. Quadwords 0-31 contain the |
| * corresponding vector registers. Quadword 32 contains the vscr as the |
| * last word (offset 12) within that quadword. Quadword 33 contains the |
| * vrsave as the first word (offset 0) within the quadword. |
| * |
| * This definition of the VMX state is compatible with the current PPC32 |
| * ptrace interface. This allows signal handling and ptrace to use the |
| * same structures. This also simplifies the implementation of a bi-arch |
| * (combined (32- and 64-bit) gdb. |
| */ |
| |
| static int vr_active(struct task_struct *target, |
| const struct user_regset *regset) |
| { |
| flush_altivec_to_thread(target); |
| return target->thread.used_vr ? regset->n : 0; |
| } |
| |
| static int vr_get(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| void *kbuf, void __user *ubuf) |
| { |
| int ret; |
| |
| flush_altivec_to_thread(target); |
| |
| BUILD_BUG_ON(offsetof(struct thread_struct, vscr) != |
| offsetof(struct thread_struct, vr[32])); |
| |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, |
| &target->thread.vr, 0, |
| 33 * sizeof(vector128)); |
| if (!ret) { |
| /* |
| * Copy out only the low-order word of vrsave. |
| */ |
| union { |
| elf_vrreg_t reg; |
| u32 word; |
| } vrsave; |
| memset(&vrsave, 0, sizeof(vrsave)); |
| vrsave.word = target->thread.vrsave; |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave, |
| 33 * sizeof(vector128), -1); |
| } |
| |
| return ret; |
| } |
| |
| static int vr_set(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| const void *kbuf, const void __user *ubuf) |
| { |
| int ret; |
| |
| flush_altivec_to_thread(target); |
| |
| BUILD_BUG_ON(offsetof(struct thread_struct, vscr) != |
| offsetof(struct thread_struct, vr[32])); |
| |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, |
| &target->thread.vr, 0, 33 * sizeof(vector128)); |
| if (!ret && count > 0) { |
| /* |
| * We use only the first word of vrsave. |
| */ |
| union { |
| elf_vrreg_t reg; |
| u32 word; |
| } vrsave; |
| memset(&vrsave, 0, sizeof(vrsave)); |
| vrsave.word = target->thread.vrsave; |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave, |
| 33 * sizeof(vector128), -1); |
| if (!ret) |
| target->thread.vrsave = vrsave.word; |
| } |
| |
| return ret; |
| } |
| #endif /* CONFIG_ALTIVEC */ |
| |
| #ifdef CONFIG_VSX |
| /* |
| * Currently to set and and get all the vsx state, you need to call |
| * the fp and VMX calls aswell. This only get/sets the lower 32 |
| * 128bit VSX registers. |
| */ |
| |
| static int vsr_active(struct task_struct *target, |
| const struct user_regset *regset) |
| { |
| flush_vsx_to_thread(target); |
| return target->thread.used_vsr ? regset->n : 0; |
| } |
| |
| static int vsr_get(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| void *kbuf, void __user *ubuf) |
| { |
| double buf[32]; |
| int ret, i; |
| |
| flush_vsx_to_thread(target); |
| |
| for (i = 0; i < 32 ; i++) |
| buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET]; |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, |
| buf, 0, 32 * sizeof(double)); |
| |
| return ret; |
| } |
| |
| static int vsr_set(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| const void *kbuf, const void __user *ubuf) |
| { |
| double buf[32]; |
| int ret,i; |
| |
| flush_vsx_to_thread(target); |
| |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, |
| buf, 0, 32 * sizeof(double)); |
| for (i = 0; i < 32 ; i++) |
| target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; |
| |
| |
| return ret; |
| } |
| #endif /* CONFIG_VSX */ |
| |
| #ifdef CONFIG_SPE |
| |
| /* |
| * For get_evrregs/set_evrregs functions 'data' has the following layout: |
| * |
| * struct { |
| * u32 evr[32]; |
| * u64 acc; |
| * u32 spefscr; |
| * } |
| */ |
| |
| static int evr_active(struct task_struct *target, |
| const struct user_regset *regset) |
| { |
| flush_spe_to_thread(target); |
| return target->thread.used_spe ? regset->n : 0; |
| } |
| |
| static int evr_get(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| void *kbuf, void __user *ubuf) |
| { |
| int ret; |
| |
| flush_spe_to_thread(target); |
| |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, |
| &target->thread.evr, |
| 0, sizeof(target->thread.evr)); |
| |
| BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) != |
| offsetof(struct thread_struct, spefscr)); |
| |
| if (!ret) |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, |
| &target->thread.acc, |
| sizeof(target->thread.evr), -1); |
| |
| return ret; |
| } |
| |
| static int evr_set(struct task_struct *target, const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| const void *kbuf, const void __user *ubuf) |
| { |
| int ret; |
| |
| flush_spe_to_thread(target); |
| |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, |
| &target->thread.evr, |
| 0, sizeof(target->thread.evr)); |
| |
| BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) != |
| offsetof(struct thread_struct, spefscr)); |
| |
| if (!ret) |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, |
| &target->thread.acc, |
| sizeof(target->thread.evr), -1); |
| |
| return ret; |
| } |
| #endif /* CONFIG_SPE */ |
| |
| |
| /* |
| * These are our native regset flavors. |
| */ |
| enum powerpc_regset { |
| REGSET_GPR, |
| REGSET_FPR, |
| #ifdef CONFIG_ALTIVEC |
| REGSET_VMX, |
| #endif |
| #ifdef CONFIG_VSX |
| REGSET_VSX, |
| #endif |
| #ifdef CONFIG_SPE |
| REGSET_SPE, |
| #endif |
| }; |
| |
| static const struct user_regset native_regsets[] = { |
| [REGSET_GPR] = { |
| .core_note_type = NT_PRSTATUS, .n = ELF_NGREG, |
| .size = sizeof(long), .align = sizeof(long), |
| .get = gpr_get, .set = gpr_set |
| }, |
| [REGSET_FPR] = { |
| .core_note_type = NT_PRFPREG, .n = ELF_NFPREG, |
| .size = sizeof(double), .align = sizeof(double), |
| .get = fpr_get, .set = fpr_set |
| }, |
| #ifdef CONFIG_ALTIVEC |
| [REGSET_VMX] = { |
| .core_note_type = NT_PPC_VMX, .n = 34, |
| .size = sizeof(vector128), .align = sizeof(vector128), |
| .active = vr_active, .get = vr_get, .set = vr_set |
| }, |
| #endif |
| #ifdef CONFIG_VSX |
| [REGSET_VSX] = { |
| .core_note_type = NT_PPC_VSX, .n = 32, |
| .size = sizeof(double), .align = sizeof(double), |
| .active = vsr_active, .get = vsr_get, .set = vsr_set |
| }, |
| #endif |
| #ifdef CONFIG_SPE |
| [REGSET_SPE] = { |
| .n = 35, |
| .size = sizeof(u32), .align = sizeof(u32), |
| .active = evr_active, .get = evr_get, .set = evr_set |
| }, |
| #endif |
| }; |
| |
| static const struct user_regset_view user_ppc_native_view = { |
| .name = UTS_MACHINE, .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI, |
| .regsets = native_regsets, .n = ARRAY_SIZE(native_regsets) |
| }; |
| |
| #ifdef CONFIG_PPC64 |
| #include <linux/compat.h> |
| |
| static int gpr32_get(struct task_struct *target, |
| const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| void *kbuf, void __user *ubuf) |
| { |
| const unsigned long *regs = &target->thread.regs->gpr[0]; |
| compat_ulong_t *k = kbuf; |
| compat_ulong_t __user *u = ubuf; |
| compat_ulong_t reg; |
| |
| if (target->thread.regs == NULL) |
| return -EIO; |
| |
| CHECK_FULL_REGS(target->thread.regs); |
| |
| pos /= sizeof(reg); |
| count /= sizeof(reg); |
| |
| if (kbuf) |
| for (; count > 0 && pos < PT_MSR; --count) |
| *k++ = regs[pos++]; |
| else |
| for (; count > 0 && pos < PT_MSR; --count) |
| if (__put_user((compat_ulong_t) regs[pos++], u++)) |
| return -EFAULT; |
| |
| if (count > 0 && pos == PT_MSR) { |
| reg = get_user_msr(target); |
| if (kbuf) |
| *k++ = reg; |
| else if (__put_user(reg, u++)) |
| return -EFAULT; |
| ++pos; |
| --count; |
| } |
| |
| if (kbuf) |
| for (; count > 0 && pos < PT_REGS_COUNT; --count) |
| *k++ = regs[pos++]; |
| else |
| for (; count > 0 && pos < PT_REGS_COUNT; --count) |
| if (__put_user((compat_ulong_t) regs[pos++], u++)) |
| return -EFAULT; |
| |
| kbuf = k; |
| ubuf = u; |
| pos *= sizeof(reg); |
| count *= sizeof(reg); |
| return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, |
| PT_REGS_COUNT * sizeof(reg), -1); |
| } |
| |
| static int gpr32_set(struct task_struct *target, |
| const struct user_regset *regset, |
| unsigned int pos, unsigned int count, |
| const void *kbuf, const void __user *ubuf) |
| { |
| unsigned long *regs = &target->thread.regs->gpr[0]; |
| const compat_ulong_t *k = kbuf; |
| const compat_ulong_t __user *u = ubuf; |
| compat_ulong_t reg; |
| |
| if (target->thread.regs == NULL) |
| return -EIO; |
| |
| CHECK_FULL_REGS(target->thread.regs); |
| |
| pos /= sizeof(reg); |
| count /= sizeof(reg); |
| |
| if (kbuf) |
| for (; count > 0 && pos < PT_MSR; --count) |
| regs[pos++] = *k++; |
| else |
| for (; count > 0 && pos < PT_MSR; --count) { |
| if (__get_user(reg, u++)) |
| return -EFAULT; |
| regs[pos++] = reg; |
| } |
| |
| |
| if (count > 0 && pos == PT_MSR) { |
| if (kbuf) |
| reg = *k++; |
| else if (__get_user(reg, u++)) |
| return -EFAULT; |
| set_user_msr(target, reg); |
| ++pos; |
| --count; |
| } |
| |
| if (kbuf) { |
| for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) |
| regs[pos++] = *k++; |
| for (; count > 0 && pos < PT_TRAP; --count, ++pos) |
| ++k; |
| } else { |
| for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) { |
| if (__get_user(reg, u++)) |
| return -EFAULT; |
| regs[pos++] = reg; |
| } |
| for (; count > 0 && pos < PT_TRAP; --count, ++pos) |
| if (__get_user(reg, u++)) |
| return -EFAULT; |
| } |
| |
| if (count > 0 && pos == PT_TRAP) { |
| if (kbuf) |
| reg = *k++; |
| else if (__get_user(reg, u++)) |
| return -EFAULT; |
| set_user_trap(target, reg); |
| ++pos; |
| --count; |
| } |
| |
| kbuf = k; |
| ubuf = u; |
| pos *= sizeof(reg); |
| count *= sizeof(reg); |
| return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, |
| (PT_TRAP + 1) * sizeof(reg), -1); |
| } |
| |
| /* |
| * These are the regset flavors matching the CONFIG_PPC32 native set. |
| */ |
| static const struct user_regset compat_regsets[] = { |
| [REGSET_GPR] = { |
| .core_note_type = NT_PRSTATUS, .n = ELF_NGREG, |
| .size = sizeof(compat_long_t), .align = sizeof(compat_long_t), |
| .get = gpr32_get, .set = gpr32_set |
| }, |
| [REGSET_FPR] = { |
| .core_note_type = NT_PRFPREG, .n = ELF_NFPREG, |
| .size = sizeof(double), .align = sizeof(double), |
| .get = fpr_get, .set = fpr_set |
| }, |
| #ifdef CONFIG_ALTIVEC |
| [REGSET_VMX] = { |
| .core_note_type = NT_PPC_VMX, .n = 34, |
| .size = sizeof(vector128), .align = sizeof(vector128), |
| .active = vr_active, .get = vr_get, .set = vr_set |
| }, |
| #endif |
| #ifdef CONFIG_SPE |
| [REGSET_SPE] = { |
| .core_note_type = NT_PPC_SPE, .n = 35, |
| .size = sizeof(u32), .align = sizeof(u32), |
| .active = evr_active, .get = evr_get, .set = evr_set |
| }, |
| #endif |
| }; |
| |
| static const struct user_regset_view user_ppc_compat_view = { |
| .name = "ppc", .e_machine = EM_PPC, .ei_osabi = ELF_OSABI, |
| .regsets = compat_regsets, .n = ARRAY_SIZE(compat_regsets) |
| }; |
| #endif /* CONFIG_PPC64 */ |
| |
| const struct user_regset_view *task_user_regset_view(struct task_struct *task) |
| { |
| #ifdef CONFIG_PPC64 |
| if (test_tsk_thread_flag(task, TIF_32BIT)) |
| return &user_ppc_compat_view; |
| #endif |
| return &user_ppc_native_view; |
| } |
| |
| |
| void user_enable_single_step(struct task_struct *task) |
| { |
| struct pt_regs *regs = task->thread.regs; |
| |
| if (regs != NULL) { |
| #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) |
| task->thread.dbcr0 &= ~DBCR0_BT; |
| task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; |
| regs->msr |= MSR_DE; |
| #else |
| regs->msr &= ~MSR_BE; |
| regs->msr |= MSR_SE; |
| #endif |
| } |
| set_tsk_thread_flag(task, TIF_SINGLESTEP); |
| } |
| |
| void user_enable_block_step(struct task_struct *task) |
| { |
| struct pt_regs *regs = task->thread.regs; |
| |
| if (regs != NULL) { |
| #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) |
| task->thread.dbcr0 &= ~DBCR0_IC; |
| task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT; |
| regs->msr |= MSR_DE; |
| #else |
| regs->msr &= ~MSR_SE; |
| regs->msr |= MSR_BE; |
| #endif |
| } |
| set_tsk_thread_flag(task, TIF_SINGLESTEP); |
| } |
| |
| void user_disable_single_step(struct task_struct *task) |
| { |
| struct pt_regs *regs = task->thread.regs; |
| |
| if (regs != NULL) { |
| #if defined(CONFIG_BOOKE) |
| /* If DAC don't clear DBCRO_IDM or MSR_DE */ |
| if (task->thread.dabr) |
| task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT); |
| else { |
| task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM); |
| regs->msr &= ~MSR_DE; |
| } |
| #elif defined(CONFIG_40x) |
| task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM); |
| regs->msr &= ~MSR_DE; |
| #else |
| regs->msr &= ~(MSR_SE | MSR_BE); |
| #endif |
| } |
| clear_tsk_thread_flag(task, TIF_SINGLESTEP); |
| } |
| |
| int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, |
| unsigned long data) |
| { |
| /* For ppc64 we support one DABR and no IABR's at the moment (ppc64). |
| * For embedded processors we support one DAC and no IAC's at the |
| * moment. |
| */ |
| if (addr > 0) |
| return -EINVAL; |
| |
| /* The bottom 3 bits in dabr are flags */ |
| if ((data & ~0x7UL) >= TASK_SIZE) |
| return -EIO; |
| |
| #ifndef CONFIG_BOOKE |
| |
| /* For processors using DABR (i.e. 970), the bottom 3 bits are flags. |
| * It was assumed, on previous implementations, that 3 bits were |
| * passed together with the data address, fitting the design of the |
| * DABR register, as follows: |
| * |
| * bit 0: Read flag |
| * bit 1: Write flag |
| * bit 2: Breakpoint translation |
| * |
| * Thus, we use them here as so. |
| */ |
| |
| /* Ensure breakpoint translation bit is set */ |
| if (data && !(data & DABR_TRANSLATION)) |
| return -EIO; |
| |
| /* Move contents to the DABR register */ |
| task->thread.dabr = data; |
| |
| #endif |
| #if defined(CONFIG_BOOKE) |
| |
| /* As described above, it was assumed 3 bits were passed with the data |
| * address, but we will assume only the mode bits will be passed |
| * as to not cause alignment restrictions for DAC-based processors. |
| */ |
| |
| /* DAC's hold the whole address without any mode flags */ |
| task->thread.dabr = data & ~0x3UL; |
| |
| if (task->thread.dabr == 0) { |
| task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM); |
| task->thread.regs->msr &= ~MSR_DE; |
| return 0; |
| } |
| |
| /* Read or Write bits must be set */ |
| |
| if (!(data & 0x3UL)) |
| return -EINVAL; |
| |
| /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 |
| register */ |
| task->thread.dbcr0 = DBCR0_IDM; |
| |
| /* Check for write and read flags and set DBCR0 |
| accordingly */ |
| if (data & 0x1UL) |
| task->thread.dbcr0 |= DBSR_DAC1R; |
| if (data & 0x2UL) |
| task->thread.dbcr0 |= DBSR_DAC1W; |
| |
| task->thread.regs->msr |= MSR_DE; |
| #endif |
| return 0; |
| } |
| |
| /* |
| * Called by kernel/ptrace.c when detaching.. |
| * |
| * Make sure single step bits etc are not set. |
| */ |
| void ptrace_disable(struct task_struct *child) |
| { |
| /* make sure the single step bit is not set. */ |
| user_disable_single_step(child); |
| } |
| |
| /* |
| * Here are the old "legacy" powerpc specific getregs/setregs ptrace calls, |
| * we mark them as obsolete now, they will be removed in a future version |
| */ |
| static long arch_ptrace_old(struct task_struct *child, long request, long addr, |
| long data) |
| { |
| switch (request) { |
| case PPC_PTRACE_GETREGS: /* Get GPRs 0 - 31. */ |
| return copy_regset_to_user(child, &user_ppc_native_view, |
| REGSET_GPR, 0, 32 * sizeof(long), |
| (void __user *) data); |
| |
| case PPC_PTRACE_SETREGS: /* Set GPRs 0 - 31. */ |
| return copy_regset_from_user(child, &user_ppc_native_view, |
| REGSET_GPR, 0, 32 * sizeof(long), |
| (const void __user *) data); |
| |
| case PPC_PTRACE_GETFPREGS: /* Get FPRs 0 - 31. */ |
| return copy_regset_to_user(child, &user_ppc_native_view, |
| REGSET_FPR, 0, 32 * sizeof(double), |
| (void __user *) data); |
| |
| case PPC_PTRACE_SETFPREGS: /* Set FPRs 0 - 31. */ |
| return copy_regset_from_user(child, &user_ppc_native_view, |
| REGSET_FPR, 0, 32 * sizeof(double), |
| (const void __user *) data); |
| } |
| |
| return -EPERM; |
| } |
| |
| long arch_ptrace(struct task_struct *child, long request, long addr, long data) |
| { |
| int ret = -EPERM; |
| |
| switch (request) { |
| /* read the word at location addr in the USER area. */ |
| case PTRACE_PEEKUSR: { |
| unsigned long index, tmp; |
| |
| ret = -EIO; |
| /* convert to index and check */ |
| #ifdef CONFIG_PPC32 |
| index = (unsigned long) addr >> 2; |
| if ((addr & 3) || (index > PT_FPSCR) |
| || (child->thread.regs == NULL)) |
| #else |
| index = (unsigned long) addr >> 3; |
| if ((addr & 7) || (index > PT_FPSCR)) |
| #endif |
| break; |
| |
| CHECK_FULL_REGS(child->thread.regs); |
| if (index < PT_FPR0) { |
| tmp = ptrace_get_reg(child, (int) index); |
| } else { |
| flush_fp_to_thread(child); |
| tmp = ((unsigned long *)child->thread.fpr) |
| [TS_FPRWIDTH * (index - PT_FPR0)]; |
| } |
| ret = put_user(tmp,(unsigned long __user *) data); |
| break; |
| } |
| |
| /* write the word at location addr in the USER area */ |
| case PTRACE_POKEUSR: { |
| unsigned long index; |
| |
| ret = -EIO; |
| /* convert to index and check */ |
| #ifdef CONFIG_PPC32 |
| index = (unsigned long) addr >> 2; |
| if ((addr & 3) || (index > PT_FPSCR) |
| || (child->thread.regs == NULL)) |
| #else |
| index = (unsigned long) addr >> 3; |
| if ((addr & 7) || (index > PT_FPSCR)) |
| #endif |
| break; |
| |
| CHECK_FULL_REGS(child->thread.regs); |
| if (index < PT_FPR0) { |
| ret = ptrace_put_reg(child, index, data); |
| } else { |
| flush_fp_to_thread(child); |
| ((unsigned long *)child->thread.fpr) |
| [TS_FPRWIDTH * (index - PT_FPR0)] = data; |
| ret = 0; |
| } |
| break; |
| } |
| |
| case PTRACE_GET_DEBUGREG: { |
| ret = -EINVAL; |
| /* We only support one DABR and no IABRS at the moment */ |
| if (addr > 0) |
| break; |
| ret = put_user(child->thread.dabr, |
| (unsigned long __user *)data); |
| break; |
| } |
| |
| case PTRACE_SET_DEBUGREG: |
| ret = ptrace_set_debugreg(child, addr, data); |
| break; |
| |
| #ifdef CONFIG_PPC64 |
| case PTRACE_GETREGS64: |
| #endif |
| case PTRACE_GETREGS: /* Get all pt_regs from the child. */ |
| return copy_regset_to_user(child, &user_ppc_native_view, |
| REGSET_GPR, |
| 0, sizeof(struct pt_regs), |
| (void __user *) data); |
| |
| #ifdef CONFIG_PPC64 |
| case PTRACE_SETREGS64: |
| #endif |
| case PTRACE_SETREGS: /* Set all gp regs in the child. */ |
| return copy_regset_from_user(child, &user_ppc_native_view, |
| REGSET_GPR, |
| 0, sizeof(struct pt_regs), |
| (const void __user *) data); |
| |
| case PTRACE_GETFPREGS: /* Get the child FPU state (FPR0...31 + FPSCR) */ |
| return copy_regset_to_user(child, &user_ppc_native_view, |
| REGSET_FPR, |
| 0, sizeof(elf_fpregset_t), |
| (void __user *) data); |
| |
| case PTRACE_SETFPREGS: /* Set the child FPU state (FPR0...31 + FPSCR) */ |
| return copy_regset_from_user(child, &user_ppc_native_view, |
| REGSET_FPR, |
| 0, sizeof(elf_fpregset_t), |
| (const void __user *) data); |
| |
| #ifdef CONFIG_ALTIVEC |
| case PTRACE_GETVRREGS: |
| return copy_regset_to_user(child, &user_ppc_native_view, |
| REGSET_VMX, |
| 0, (33 * sizeof(vector128) + |
| sizeof(u32)), |
| (void __user *) data); |
| |
| case PTRACE_SETVRREGS: |
| return copy_regset_from_user(child, &user_ppc_native_view, |
| REGSET_VMX, |
| 0, (33 * sizeof(vector128) + |
| sizeof(u32)), |
| (const void __user *) data); |
| #endif |
| #ifdef CONFIG_VSX |
| case PTRACE_GETVSRREGS: |
| return copy_regset_to_user(child, &user_ppc_native_view, |
| REGSET_VSX, |
| 0, 32 * sizeof(double), |
| (void __user *) data); |
| |
| case PTRACE_SETVSRREGS: |
| return copy_regset_from_user(child, &user_ppc_native_view, |
| REGSET_VSX, |
| 0, 32 * sizeof(double), |
| (const void __user *) data); |
| #endif |
| #ifdef CONFIG_SPE |
| case PTRACE_GETEVRREGS: |
| /* Get the child spe register state. */ |
| return copy_regset_to_user(child, &user_ppc_native_view, |
| REGSET_SPE, 0, 35 * sizeof(u32), |
| (void __user *) data); |
| |
| case PTRACE_SETEVRREGS: |
| /* Set the child spe register state. */ |
| return copy_regset_from_user(child, &user_ppc_native_view, |
| REGSET_SPE, 0, 35 * sizeof(u32), |
| (const void __user *) data); |
| #endif |
| |
| /* Old reverse args ptrace callss */ |
| case PPC_PTRACE_GETREGS: /* Get GPRs 0 - 31. */ |
| case PPC_PTRACE_SETREGS: /* Set GPRs 0 - 31. */ |
| case PPC_PTRACE_GETFPREGS: /* Get FPRs 0 - 31. */ |
| case PPC_PTRACE_SETFPREGS: /* Get FPRs 0 - 31. */ |
| ret = arch_ptrace_old(child, request, addr, data); |
| break; |
| |
| default: |
| ret = ptrace_request(child, request, addr, data); |
| break; |
| } |
| return ret; |
| } |
| |
| /* |
| * We must return the syscall number to actually look up in the table. |
| * This can be -1L to skip running any syscall at all. |
| */ |
| long do_syscall_trace_enter(struct pt_regs *regs) |
| { |
| long ret = 0; |
| |
| secure_computing(regs->gpr[0]); |
| |
| if (test_thread_flag(TIF_SYSCALL_TRACE) && |
| tracehook_report_syscall_entry(regs)) |
| /* |
| * Tracing decided this syscall should not happen. |
| * We'll return a bogus call number to get an ENOSYS |
| * error, but leave the original number in regs->gpr[0]. |
| */ |
| ret = -1L; |
| |
| if (unlikely(current->audit_context)) { |
| #ifdef CONFIG_PPC64 |
| if (!test_thread_flag(TIF_32BIT)) |
| audit_syscall_entry(AUDIT_ARCH_PPC64, |
| regs->gpr[0], |
| regs->gpr[3], regs->gpr[4], |
| regs->gpr[5], regs->gpr[6]); |
| else |
| #endif |
| audit_syscall_entry(AUDIT_ARCH_PPC, |
| regs->gpr[0], |
| regs->gpr[3] & 0xffffffff, |
| regs->gpr[4] & 0xffffffff, |
| regs->gpr[5] & 0xffffffff, |
| regs->gpr[6] & 0xffffffff); |
| } |
| |
| return ret ?: regs->gpr[0]; |
| } |
| |
| void do_syscall_trace_leave(struct pt_regs *regs) |
| { |
| int step; |
| |
| if (unlikely(current->audit_context)) |
| audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, |
| regs->result); |
| |
| step = test_thread_flag(TIF_SINGLESTEP); |
| if (step || test_thread_flag(TIF_SYSCALL_TRACE)) |
| tracehook_report_syscall_exit(regs, step); |
| } |