| /* |
| * Copyright (C) 2009 ST-Ericsson |
| * |
| * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> |
| * |
| * This program is free software; you can redistribute it |
| * and/or modify it under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation. |
| * |
| * AB4500 is a companion power management chip used with U8500. |
| * On this platform, this is interfaced with SSP0 controller |
| * which is a ARM primecell pl022. |
| * |
| * At the moment the module just exports read/write features. |
| * Interrupt management to be added - TODO. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/spi/spi.h> |
| #include <linux/mfd/ab4500.h> |
| |
| /* just required if probe fails, we need to |
| * unregister the device |
| */ |
| static struct spi_driver ab4500_driver; |
| |
| /* |
| * This funtion writes to any AB4500 registers using |
| * SPI protocol & before it writes it packs the data |
| * in the below 24 bit frame format |
| * |
| * *|------------------------------------| |
| * *| 23|22...18|17.......10|9|8|7......0| |
| * *| r/w bank adr data | |
| * * ------------------------------------ |
| * |
| * This function shouldn't be called from interrupt |
| * context |
| */ |
| int ab4500_write(struct ab4500 *ab4500, unsigned char block, |
| unsigned long addr, unsigned char data) |
| { |
| struct spi_transfer xfer; |
| struct spi_message msg; |
| int err; |
| unsigned long spi_data = |
| block << 18 | addr << 10 | data; |
| |
| mutex_lock(&ab4500->lock); |
| ab4500->tx_buf[0] = spi_data; |
| ab4500->rx_buf[0] = 0; |
| |
| xfer.tx_buf = ab4500->tx_buf; |
| xfer.rx_buf = NULL; |
| xfer.len = sizeof(unsigned long); |
| |
| spi_message_init(&msg); |
| spi_message_add_tail(&xfer, &msg); |
| |
| err = spi_sync(ab4500->spi, &msg); |
| mutex_unlock(&ab4500->lock); |
| |
| return err; |
| } |
| EXPORT_SYMBOL(ab4500_write); |
| |
| int ab4500_read(struct ab4500 *ab4500, unsigned char block, |
| unsigned long addr) |
| { |
| struct spi_transfer xfer; |
| struct spi_message msg; |
| unsigned long spi_data = |
| 1 << 23 | block << 18 | addr << 10; |
| |
| mutex_lock(&ab4500->lock); |
| ab4500->tx_buf[0] = spi_data; |
| ab4500->rx_buf[0] = 0; |
| |
| xfer.tx_buf = ab4500->tx_buf; |
| xfer.rx_buf = ab4500->rx_buf; |
| xfer.len = sizeof(unsigned long); |
| |
| spi_message_init(&msg); |
| spi_message_add_tail(&xfer, &msg); |
| |
| spi_sync(ab4500->spi, &msg); |
| mutex_unlock(&ab4500->lock); |
| |
| return ab4500->rx_buf[0]; |
| } |
| EXPORT_SYMBOL(ab4500_read); |
| |
| /* ref: ab3100 core */ |
| #define AB4500_DEVICE(devname, devid) \ |
| static struct platform_device ab4500_##devname##_device = { \ |
| .name = devid, \ |
| .id = -1, \ |
| } |
| |
| /* list of childern devices of ab4500 - all are |
| * not populated here - TODO |
| */ |
| AB4500_DEVICE(charger, "ab4500-charger"); |
| AB4500_DEVICE(audio, "ab4500-audio"); |
| AB4500_DEVICE(usb, "ab4500-usb"); |
| AB4500_DEVICE(tvout, "ab4500-tvout"); |
| AB4500_DEVICE(sim, "ab4500-sim"); |
| AB4500_DEVICE(gpadc, "ab4500-gpadc"); |
| AB4500_DEVICE(clkmgt, "ab4500-clkmgt"); |
| AB4500_DEVICE(misc, "ab4500-misc"); |
| |
| static struct platform_device *ab4500_platform_devs[] = { |
| &ab4500_charger_device, |
| &ab4500_audio_device, |
| &ab4500_usb_device, |
| &ab4500_tvout_device, |
| &ab4500_sim_device, |
| &ab4500_gpadc_device, |
| &ab4500_clkmgt_device, |
| &ab4500_misc_device, |
| }; |
| |
| static int __init ab4500_probe(struct spi_device *spi) |
| { |
| struct ab4500 *ab4500; |
| unsigned char revision; |
| int err = 0; |
| int i; |
| |
| ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL); |
| if (!ab4500) { |
| dev_err(&spi->dev, "could not allocate AB4500\n"); |
| err = -ENOMEM; |
| goto not_detect; |
| } |
| |
| ab4500->spi = spi; |
| spi_set_drvdata(spi, ab4500); |
| |
| mutex_init(&ab4500->lock); |
| |
| /* read the revision register */ |
| revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG); |
| |
| /* revision id 0x0 is for early drop, 0x10 is for cut1.0 */ |
| if (revision == 0x0 || revision == 0x10) |
| dev_info(&spi->dev, "Detected chip: %s, revision = %x\n", |
| ab4500_driver.driver.name, revision); |
| else { |
| dev_err(&spi->dev, "unknown chip: 0x%x\n", revision); |
| goto not_detect; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++) { |
| ab4500_platform_devs[i]->dev.parent = |
| &spi->dev; |
| platform_set_drvdata(ab4500_platform_devs[i], ab4500); |
| } |
| |
| /* register the ab4500 platform devices */ |
| platform_add_devices(ab4500_platform_devs, |
| ARRAY_SIZE(ab4500_platform_devs)); |
| |
| return err; |
| |
| not_detect: |
| spi_unregister_driver(&ab4500_driver); |
| kfree(ab4500); |
| return err; |
| } |
| |
| static int __devexit ab4500_remove(struct spi_device *spi) |
| { |
| struct ab4500 *ab4500 = |
| spi_get_drvdata(spi); |
| |
| kfree(ab4500); |
| |
| return 0; |
| } |
| |
| static struct spi_driver ab4500_driver = { |
| .driver = { |
| .name = "ab4500", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ab4500_probe, |
| .remove = __devexit_p(ab4500_remove) |
| }; |
| |
| static int __devinit ab4500_init(void) |
| { |
| return spi_register_driver(&ab4500_driver); |
| } |
| |
| static void __exit ab4500_exit(void) |
| { |
| spi_unregister_driver(&ab4500_driver); |
| } |
| |
| subsys_initcall(ab4500_init); |
| module_exit(ab4500_exit); |
| |
| MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com"); |
| MODULE_DESCRIPTION("AB4500 core driver"); |
| MODULE_LICENSE("GPL"); |