| /* |
| * arch/arm/mach-ixp4xx/common.c |
| * |
| * Generic code shared across all IXP4XX platforms |
| * |
| * Maintainer: Deepak Saxena <dsaxena@plexity.net> |
| * |
| * Copyright 2002 (c) Intel Corporation |
| * Copyright 2003-2004 (c) MontaVista, Software, Inc. |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <linux/serial.h> |
| #include <linux/tty.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_core.h> |
| #include <linux/interrupt.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <linux/export.h> |
| #include <linux/cpu.h> |
| #include <linux/pci.h> |
| #include <linux/sched_clock.h> |
| #include <linux/irqchip/irq-ixp4xx.h> |
| #include <linux/platform_data/timer-ixp4xx.h> |
| #include <mach/udc.h> |
| #include <mach/hardware.h> |
| #include <mach/io.h> |
| #include <linux/uaccess.h> |
| #include <asm/page.h> |
| #include <asm/exception.h> |
| #include <asm/irq.h> |
| #include <asm/system_misc.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| #include <asm/mach/time.h> |
| |
| #include "irqs.h" |
| |
| #define IXP4XX_TIMER_FREQ 66666000 |
| |
| /************************************************************************* |
| * IXP4xx chipset I/O mapping |
| *************************************************************************/ |
| static struct map_desc ixp4xx_io_desc[] __initdata = { |
| { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */ |
| .virtual = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT, |
| .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS), |
| .length = IXP4XX_PERIPHERAL_REGION_SIZE, |
| .type = MT_DEVICE |
| }, { /* Expansion Bus Config Registers */ |
| .virtual = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT, |
| .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), |
| .length = IXP4XX_EXP_CFG_REGION_SIZE, |
| .type = MT_DEVICE |
| }, { /* PCI Registers */ |
| .virtual = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT, |
| .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), |
| .length = IXP4XX_PCI_CFG_REGION_SIZE, |
| .type = MT_DEVICE |
| }, |
| }; |
| |
| void __init ixp4xx_map_io(void) |
| { |
| iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); |
| } |
| |
| void __init ixp4xx_init_irq(void) |
| { |
| /* |
| * ixp4xx does not implement the XScale PWRMODE register |
| * so it must not call cpu_do_idle(). |
| */ |
| cpu_idle_poll_ctrl(true); |
| |
| ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS, |
| (cpu_is_ixp46x() || cpu_is_ixp43x())); |
| } |
| |
| void __init ixp4xx_timer_init(void) |
| { |
| return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS, |
| IRQ_IXP4XX_TIMER1, |
| IXP4XX_TIMER_FREQ); |
| } |
| |
| static struct pxa2xx_udc_mach_info ixp4xx_udc_info; |
| |
| void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info) |
| { |
| memcpy(&ixp4xx_udc_info, info, sizeof *info); |
| } |
| |
| static struct resource ixp4xx_udc_resources[] = { |
| [0] = { |
| .start = 0xc800b000, |
| .end = 0xc800bfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IXP4XX_USB, |
| .end = IRQ_IXP4XX_USB, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource ixp4xx_gpio_resource[] = { |
| { |
| .start = IXP4XX_GPIO_BASE_PHYS, |
| .end = IXP4XX_GPIO_BASE_PHYS + 0xfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device ixp4xx_gpio_device = { |
| .name = "ixp4xx-gpio", |
| .id = -1, |
| .dev = { |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| .resource = ixp4xx_gpio_resource, |
| .num_resources = ARRAY_SIZE(ixp4xx_gpio_resource), |
| }; |
| |
| /* |
| * USB device controller. The IXP4xx uses the same controller as PXA25X, |
| * so we just use the same device. |
| */ |
| static struct platform_device ixp4xx_udc_device = { |
| .name = "pxa25x-udc", |
| .id = -1, |
| .num_resources = 2, |
| .resource = ixp4xx_udc_resources, |
| .dev = { |
| .platform_data = &ixp4xx_udc_info, |
| }, |
| }; |
| |
| static struct resource ixp4xx_npe_resources[] = { |
| { |
| .start = IXP4XX_NPEA_BASE_PHYS, |
| .end = IXP4XX_NPEA_BASE_PHYS + 0xfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = IXP4XX_NPEB_BASE_PHYS, |
| .end = IXP4XX_NPEB_BASE_PHYS + 0xfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = IXP4XX_NPEC_BASE_PHYS, |
| .end = IXP4XX_NPEC_BASE_PHYS + 0xfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| |
| }; |
| |
| static struct platform_device ixp4xx_npe_device = { |
| .name = "ixp4xx-npe", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(ixp4xx_npe_resources), |
| .resource = ixp4xx_npe_resources, |
| }; |
| |
| static struct resource ixp4xx_qmgr_resources[] = { |
| { |
| .start = IXP4XX_QMGR_BASE_PHYS, |
| .end = IXP4XX_QMGR_BASE_PHYS + 0x3fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = IRQ_IXP4XX_QM1, |
| .end = IRQ_IXP4XX_QM1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = IRQ_IXP4XX_QM2, |
| .end = IRQ_IXP4XX_QM2, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device ixp4xx_qmgr_device = { |
| .name = "ixp4xx-qmgr", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(ixp4xx_qmgr_resources), |
| .resource = ixp4xx_qmgr_resources, |
| }; |
| |
| static struct platform_device *ixp4xx_devices[] __initdata = { |
| &ixp4xx_npe_device, |
| &ixp4xx_qmgr_device, |
| &ixp4xx_gpio_device, |
| &ixp4xx_udc_device, |
| }; |
| |
| static struct resource ixp46x_i2c_resources[] = { |
| [0] = { |
| .start = 0xc8011000, |
| .end = 0xc801101c, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IXP4XX_I2C, |
| .end = IRQ_IXP4XX_I2C, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| /* |
| * I2C controller. The IXP46x uses the same block as the IOP3xx, so |
| * we just use the same device name. |
| */ |
| static struct platform_device ixp46x_i2c_controller = { |
| .name = "IOP3xx-I2C", |
| .id = 0, |
| .num_resources = 2, |
| .resource = ixp46x_i2c_resources |
| }; |
| |
| static struct platform_device *ixp46x_devices[] __initdata = { |
| &ixp46x_i2c_controller |
| }; |
| |
| unsigned long ixp4xx_exp_bus_size; |
| EXPORT_SYMBOL(ixp4xx_exp_bus_size); |
| |
| void __init ixp4xx_sys_init(void) |
| { |
| ixp4xx_exp_bus_size = SZ_16M; |
| |
| platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); |
| |
| if (cpu_is_ixp46x()) { |
| int region; |
| |
| platform_add_devices(ixp46x_devices, |
| ARRAY_SIZE(ixp46x_devices)); |
| |
| for (region = 0; region < 7; region++) { |
| if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) { |
| ixp4xx_exp_bus_size = SZ_32M; |
| break; |
| } |
| } |
| } |
| |
| printk("IXP4xx: Using %luMiB expansion bus window size\n", |
| ixp4xx_exp_bus_size >> 20); |
| } |
| |
| unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; |
| EXPORT_SYMBOL(ixp4xx_timer_freq); |
| |
| void ixp4xx_restart(enum reboot_mode mode, const char *cmd) |
| { |
| if (mode == REBOOT_SOFT) { |
| /* Jump into ROM at address 0 */ |
| soft_restart(0); |
| } else { |
| /* Use on-chip reset capability */ |
| |
| /* set the "key" register to enable access to |
| * "timer" and "enable" registers |
| */ |
| *IXP4XX_OSWK = IXP4XX_WDT_KEY; |
| |
| /* write 0 to the timer register for an immediate reset */ |
| *IXP4XX_OSWT = 0; |
| |
| *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; |
| } |
| } |
| |
| #ifdef CONFIG_PCI |
| static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) |
| { |
| return (dma_addr + size) > SZ_64M; |
| } |
| |
| static int ixp4xx_platform_notify_remove(struct device *dev) |
| { |
| if (dev_is_pci(dev)) |
| dmabounce_unregister_dev(dev); |
| |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things. |
| */ |
| static int ixp4xx_platform_notify(struct device *dev) |
| { |
| dev->dma_mask = &dev->coherent_dma_mask; |
| |
| #ifdef CONFIG_PCI |
| if (dev_is_pci(dev)) { |
| dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */ |
| dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); |
| return 0; |
| } |
| #endif |
| |
| dev->coherent_dma_mask = DMA_BIT_MASK(32); |
| return 0; |
| } |
| |
| int dma_set_coherent_mask(struct device *dev, u64 mask) |
| { |
| if (dev_is_pci(dev)) |
| mask &= DMA_BIT_MASK(28); /* 64 MB */ |
| |
| if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) { |
| dev->coherent_dma_mask = mask; |
| return 0; |
| } |
| |
| return -EIO; /* device wanted sub-64MB mask */ |
| } |
| EXPORT_SYMBOL(dma_set_coherent_mask); |
| |
| #ifdef CONFIG_IXP4XX_INDIRECT_PCI |
| /* |
| * In the case of using indirect PCI, we simply return the actual PCI |
| * address and our read/write implementation use that to drive the |
| * access registers. If something outside of PCI is ioremap'd, we |
| * fallback to the default. |
| */ |
| |
| static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size, |
| unsigned int mtype, void *caller) |
| { |
| if (!is_pci_memory(addr)) |
| return __arm_ioremap_caller(addr, size, mtype, caller); |
| |
| return (void __iomem *)addr; |
| } |
| |
| static void ixp4xx_iounmap(volatile void __iomem *addr) |
| { |
| if (!is_pci_memory((__force u32)addr)) |
| __iounmap(addr); |
| } |
| #endif |
| |
| void __init ixp4xx_init_early(void) |
| { |
| platform_notify = ixp4xx_platform_notify; |
| #ifdef CONFIG_PCI |
| platform_notify_remove = ixp4xx_platform_notify_remove; |
| #endif |
| #ifdef CONFIG_IXP4XX_INDIRECT_PCI |
| arch_ioremap_caller = ixp4xx_ioremap_caller; |
| arch_iounmap = ixp4xx_iounmap; |
| #endif |
| } |