| /* |
| * Copyright © 2012 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eugeni Dodonov <eugeni.dodonov@intel.com> |
| * |
| */ |
| |
| #include <drm/drm_scdc_helper.h> |
| |
| #include "i915_drv.h" |
| #include "intel_audio.h" |
| #include "intel_backlight.h" |
| #include "intel_combo_phy.h" |
| #include "intel_connector.h" |
| #include "intel_crtc.h" |
| #include "intel_ddi.h" |
| #include "intel_ddi_buf_trans.h" |
| #include "intel_de.h" |
| #include "intel_display_types.h" |
| #include "intel_dp.h" |
| #include "intel_dp_link_training.h" |
| #include "intel_dp_mst.h" |
| #include "intel_dpio_phy.h" |
| #include "intel_drrs.h" |
| #include "intel_dsi.h" |
| #include "intel_fdi.h" |
| #include "intel_fifo_underrun.h" |
| #include "intel_gmbus.h" |
| #include "intel_hdcp.h" |
| #include "intel_hdmi.h" |
| #include "intel_hotplug.h" |
| #include "intel_lspcon.h" |
| #include "intel_pps.h" |
| #include "intel_psr.h" |
| #include "intel_snps_phy.h" |
| #include "intel_sprite.h" |
| #include "intel_tc.h" |
| #include "intel_vdsc.h" |
| #include "intel_vrr.h" |
| #include "skl_scaler.h" |
| #include "skl_universal_plane.h" |
| |
| static const u8 index_to_dp_signal_levels[] = { |
| [0] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0, |
| [1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1, |
| [2] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2, |
| [3] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3, |
| [4] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0, |
| [5] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1, |
| [6] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2, |
| [7] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0, |
| [8] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1, |
| [9] = DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0, |
| }; |
| |
| static int intel_ddi_hdmi_level(struct intel_encoder *encoder, |
| const struct intel_ddi_buf_trans *trans) |
| { |
| int level; |
| |
| level = intel_bios_hdmi_level_shift(encoder); |
| if (level < 0) |
| level = trans->hdmi_default_entry; |
| |
| return level; |
| } |
| |
| static bool has_buf_trans_select(struct drm_i915_private *i915) |
| { |
| return DISPLAY_VER(i915) < 10 && !IS_BROXTON(i915); |
| } |
| |
| static bool has_iboost(struct drm_i915_private *i915) |
| { |
| return DISPLAY_VER(i915) == 9 && !IS_BROXTON(i915); |
| } |
| |
| /* |
| * Starting with Haswell, DDI port buffers must be programmed with correct |
| * values in advance. This function programs the correct values for |
| * DP/eDP/FDI use cases. |
| */ |
| void hsw_prepare_dp_ddi_buffers(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u32 iboost_bit = 0; |
| int i, n_entries; |
| enum port port = encoder->port; |
| const struct intel_ddi_buf_trans *trans; |
| |
| trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries); |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, !trans)) |
| return; |
| |
| /* If we're boosting the current, set bit 31 of trans1 */ |
| if (has_iboost(dev_priv) && |
| intel_bios_encoder_dp_boost_level(encoder->devdata)) |
| iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; |
| |
| for (i = 0; i < n_entries; i++) { |
| intel_de_write(dev_priv, DDI_BUF_TRANS_LO(port, i), |
| trans->entries[i].hsw.trans1 | iboost_bit); |
| intel_de_write(dev_priv, DDI_BUF_TRANS_HI(port, i), |
| trans->entries[i].hsw.trans2); |
| } |
| } |
| |
| /* |
| * Starting with Haswell, DDI port buffers must be programmed with correct |
| * values in advance. This function programs the correct values for |
| * HDMI/DVI use cases. |
| */ |
| static void hsw_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| int level = intel_ddi_level(encoder, crtc_state, 0); |
| u32 iboost_bit = 0; |
| int n_entries; |
| enum port port = encoder->port; |
| const struct intel_ddi_buf_trans *trans; |
| |
| trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries); |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, !trans)) |
| return; |
| |
| /* If we're boosting the current, set bit 31 of trans1 */ |
| if (has_iboost(dev_priv) && |
| intel_bios_encoder_hdmi_boost_level(encoder->devdata)) |
| iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; |
| |
| /* Entry 9 is for HDMI: */ |
| intel_de_write(dev_priv, DDI_BUF_TRANS_LO(port, 9), |
| trans->entries[level].hsw.trans1 | iboost_bit); |
| intel_de_write(dev_priv, DDI_BUF_TRANS_HI(port, 9), |
| trans->entries[level].hsw.trans2); |
| } |
| |
| void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| if (IS_BROXTON(dev_priv)) { |
| udelay(16); |
| return; |
| } |
| |
| if (wait_for_us((intel_de_read(dev_priv, DDI_BUF_CTL(port)) & |
| DDI_BUF_IS_IDLE), 8)) |
| drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c to get idle\n", |
| port_name(port)); |
| } |
| |
| static void intel_wait_ddi_buf_active(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| int ret; |
| |
| /* Wait > 518 usecs for DDI_BUF_CTL to be non idle */ |
| if (DISPLAY_VER(dev_priv) < 10) { |
| usleep_range(518, 1000); |
| return; |
| } |
| |
| ret = _wait_for(!(intel_de_read(dev_priv, DDI_BUF_CTL(port)) & |
| DDI_BUF_IS_IDLE), IS_DG2(dev_priv) ? 1200 : 500, 10, 10); |
| |
| if (ret) |
| drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c to get active\n", |
| port_name(port)); |
| } |
| |
| static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll) |
| { |
| switch (pll->info->id) { |
| case DPLL_ID_WRPLL1: |
| return PORT_CLK_SEL_WRPLL1; |
| case DPLL_ID_WRPLL2: |
| return PORT_CLK_SEL_WRPLL2; |
| case DPLL_ID_SPLL: |
| return PORT_CLK_SEL_SPLL; |
| case DPLL_ID_LCPLL_810: |
| return PORT_CLK_SEL_LCPLL_810; |
| case DPLL_ID_LCPLL_1350: |
| return PORT_CLK_SEL_LCPLL_1350; |
| case DPLL_ID_LCPLL_2700: |
| return PORT_CLK_SEL_LCPLL_2700; |
| default: |
| MISSING_CASE(pll->info->id); |
| return PORT_CLK_SEL_NONE; |
| } |
| } |
| |
| static u32 icl_pll_to_ddi_clk_sel(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| const struct intel_shared_dpll *pll = crtc_state->shared_dpll; |
| int clock = crtc_state->port_clock; |
| const enum intel_dpll_id id = pll->info->id; |
| |
| switch (id) { |
| default: |
| /* |
| * DPLL_ID_ICL_DPLL0 and DPLL_ID_ICL_DPLL1 should not be used |
| * here, so do warn if this get passed in |
| */ |
| MISSING_CASE(id); |
| return DDI_CLK_SEL_NONE; |
| case DPLL_ID_ICL_TBTPLL: |
| switch (clock) { |
| case 162000: |
| return DDI_CLK_SEL_TBT_162; |
| case 270000: |
| return DDI_CLK_SEL_TBT_270; |
| case 540000: |
| return DDI_CLK_SEL_TBT_540; |
| case 810000: |
| return DDI_CLK_SEL_TBT_810; |
| default: |
| MISSING_CASE(clock); |
| return DDI_CLK_SEL_NONE; |
| } |
| case DPLL_ID_ICL_MGPLL1: |
| case DPLL_ID_ICL_MGPLL2: |
| case DPLL_ID_ICL_MGPLL3: |
| case DPLL_ID_ICL_MGPLL4: |
| case DPLL_ID_TGL_MGPLL5: |
| case DPLL_ID_TGL_MGPLL6: |
| return DDI_CLK_SEL_MG; |
| } |
| } |
| |
| static u32 ddi_buf_phy_link_rate(int port_clock) |
| { |
| switch (port_clock) { |
| case 162000: |
| return DDI_BUF_PHY_LINK_RATE(0); |
| case 216000: |
| return DDI_BUF_PHY_LINK_RATE(4); |
| case 243000: |
| return DDI_BUF_PHY_LINK_RATE(5); |
| case 270000: |
| return DDI_BUF_PHY_LINK_RATE(1); |
| case 324000: |
| return DDI_BUF_PHY_LINK_RATE(6); |
| case 432000: |
| return DDI_BUF_PHY_LINK_RATE(7); |
| case 540000: |
| return DDI_BUF_PHY_LINK_RATE(2); |
| case 810000: |
| return DDI_BUF_PHY_LINK_RATE(3); |
| default: |
| MISSING_CASE(port_clock); |
| return DDI_BUF_PHY_LINK_RATE(0); |
| } |
| } |
| |
| static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| /* DDI_BUF_CTL_ENABLE will be set by intel_ddi_prepare_link_retrain() later */ |
| intel_dp->DP = dig_port->saved_port_bits | |
| DDI_PORT_WIDTH(crtc_state->lane_count) | |
| DDI_BUF_TRANS_SELECT(0); |
| |
| if (IS_ALDERLAKE_P(i915) && intel_phy_is_tc(i915, phy)) { |
| intel_dp->DP |= ddi_buf_phy_link_rate(crtc_state->port_clock); |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) |
| intel_dp->DP |= DDI_BUF_CTL_TC_PHY_OWNERSHIP; |
| } |
| } |
| |
| static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| u32 val = intel_de_read(dev_priv, DDI_CLK_SEL(port)) & DDI_CLK_SEL_MASK; |
| |
| switch (val) { |
| case DDI_CLK_SEL_NONE: |
| return 0; |
| case DDI_CLK_SEL_TBT_162: |
| return 162000; |
| case DDI_CLK_SEL_TBT_270: |
| return 270000; |
| case DDI_CLK_SEL_TBT_540: |
| return 540000; |
| case DDI_CLK_SEL_TBT_810: |
| return 810000; |
| default: |
| MISSING_CASE(val); |
| return 0; |
| } |
| } |
| |
| static void ddi_dotclock_get(struct intel_crtc_state *pipe_config) |
| { |
| int dotclock; |
| |
| if (pipe_config->has_pch_encoder) |
| dotclock = intel_dotclock_calculate(pipe_config->port_clock, |
| &pipe_config->fdi_m_n); |
| else if (intel_crtc_has_dp_encoder(pipe_config)) |
| dotclock = intel_dotclock_calculate(pipe_config->port_clock, |
| &pipe_config->dp_m_n); |
| else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp > 24) |
| dotclock = pipe_config->port_clock * 24 / pipe_config->pipe_bpp; |
| else |
| dotclock = pipe_config->port_clock; |
| |
| if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 && |
| !intel_crtc_has_dp_encoder(pipe_config)) |
| dotclock *= 2; |
| |
| if (pipe_config->pixel_multiplier) |
| dotclock /= pipe_config->pixel_multiplier; |
| |
| pipe_config->hw.adjusted_mode.crtc_clock = dotclock; |
| } |
| |
| void intel_ddi_set_dp_msa(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| u32 temp; |
| |
| if (!intel_crtc_has_dp_encoder(crtc_state)) |
| return; |
| |
| drm_WARN_ON(&dev_priv->drm, transcoder_is_dsi(cpu_transcoder)); |
| |
| temp = DP_MSA_MISC_SYNC_CLOCK; |
| |
| switch (crtc_state->pipe_bpp) { |
| case 18: |
| temp |= DP_MSA_MISC_6_BPC; |
| break; |
| case 24: |
| temp |= DP_MSA_MISC_8_BPC; |
| break; |
| case 30: |
| temp |= DP_MSA_MISC_10_BPC; |
| break; |
| case 36: |
| temp |= DP_MSA_MISC_12_BPC; |
| break; |
| default: |
| MISSING_CASE(crtc_state->pipe_bpp); |
| break; |
| } |
| |
| /* nonsense combination */ |
| drm_WARN_ON(&dev_priv->drm, crtc_state->limited_color_range && |
| crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB); |
| |
| if (crtc_state->limited_color_range) |
| temp |= DP_MSA_MISC_COLOR_CEA_RGB; |
| |
| /* |
| * As per DP 1.2 spec section 2.3.4.3 while sending |
| * YCBCR 444 signals we should program MSA MISC1/0 fields with |
| * colorspace information. |
| */ |
| if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) |
| temp |= DP_MSA_MISC_COLOR_YCBCR_444_BT709; |
| |
| /* |
| * As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication |
| * of Color Encoding Format and Content Color Gamut] while sending |
| * YCBCR 420, HDR BT.2020 signals we should program MSA MISC1 fields |
| * which indicate VSC SDP for the Pixel Encoding/Colorimetry Format. |
| */ |
| if (intel_dp_needs_vsc_sdp(crtc_state, conn_state)) |
| temp |= DP_MSA_MISC_COLOR_VSC_SDP; |
| |
| intel_de_write(dev_priv, TRANS_MSA_MISC(cpu_transcoder), temp); |
| } |
| |
| static u32 bdw_trans_port_sync_master_select(enum transcoder master_transcoder) |
| { |
| if (master_transcoder == TRANSCODER_EDP) |
| return 0; |
| else |
| return master_transcoder + 1; |
| } |
| |
| static void |
| intel_ddi_config_transcoder_dp2(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| u32 val = 0; |
| |
| if (intel_dp_is_uhbr(crtc_state)) |
| val = TRANS_DP2_128B132B_CHANNEL_CODING; |
| |
| intel_de_write(i915, TRANS_DP2_CTL(cpu_transcoder), val); |
| } |
| |
| /* |
| * Returns the TRANS_DDI_FUNC_CTL value based on CRTC state. |
| * |
| * Only intended to be used by intel_ddi_enable_transcoder_func() and |
| * intel_ddi_config_transcoder_func(). |
| */ |
| static u32 |
| intel_ddi_transcoder_func_reg_val_get(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| enum port port = encoder->port; |
| u32 temp; |
| |
| /* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */ |
| temp = TRANS_DDI_FUNC_ENABLE; |
| if (DISPLAY_VER(dev_priv) >= 12) |
| temp |= TGL_TRANS_DDI_SELECT_PORT(port); |
| else |
| temp |= TRANS_DDI_SELECT_PORT(port); |
| |
| switch (crtc_state->pipe_bpp) { |
| case 18: |
| temp |= TRANS_DDI_BPC_6; |
| break; |
| case 24: |
| temp |= TRANS_DDI_BPC_8; |
| break; |
| case 30: |
| temp |= TRANS_DDI_BPC_10; |
| break; |
| case 36: |
| temp |= TRANS_DDI_BPC_12; |
| break; |
| default: |
| BUG(); |
| } |
| |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC) |
| temp |= TRANS_DDI_PVSYNC; |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC) |
| temp |= TRANS_DDI_PHSYNC; |
| |
| if (cpu_transcoder == TRANSCODER_EDP) { |
| switch (pipe) { |
| case PIPE_A: |
| /* On Haswell, can only use the always-on power well for |
| * eDP when not using the panel fitter, and when not |
| * using motion blur mitigation (which we don't |
| * support). */ |
| if (crtc_state->pch_pfit.force_thru) |
| temp |= TRANS_DDI_EDP_INPUT_A_ONOFF; |
| else |
| temp |= TRANS_DDI_EDP_INPUT_A_ON; |
| break; |
| case PIPE_B: |
| temp |= TRANS_DDI_EDP_INPUT_B_ONOFF; |
| break; |
| case PIPE_C: |
| temp |= TRANS_DDI_EDP_INPUT_C_ONOFF; |
| break; |
| default: |
| BUG(); |
| break; |
| } |
| } |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { |
| if (crtc_state->has_hdmi_sink) |
| temp |= TRANS_DDI_MODE_SELECT_HDMI; |
| else |
| temp |= TRANS_DDI_MODE_SELECT_DVI; |
| |
| if (crtc_state->hdmi_scrambling) |
| temp |= TRANS_DDI_HDMI_SCRAMBLING; |
| if (crtc_state->hdmi_high_tmds_clock_ratio) |
| temp |= TRANS_DDI_HIGH_TMDS_CHAR_RATE; |
| } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) { |
| temp |= TRANS_DDI_MODE_SELECT_FDI_OR_128B132B; |
| temp |= (crtc_state->fdi_lanes - 1) << 1; |
| } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) { |
| if (intel_dp_is_uhbr(crtc_state)) |
| temp |= TRANS_DDI_MODE_SELECT_FDI_OR_128B132B; |
| else |
| temp |= TRANS_DDI_MODE_SELECT_DP_MST; |
| temp |= DDI_PORT_WIDTH(crtc_state->lane_count); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| enum transcoder master; |
| |
| master = crtc_state->mst_master_transcoder; |
| drm_WARN_ON(&dev_priv->drm, |
| master == INVALID_TRANSCODER); |
| temp |= TRANS_DDI_MST_TRANSPORT_SELECT(master); |
| } |
| } else { |
| temp |= TRANS_DDI_MODE_SELECT_DP_SST; |
| temp |= DDI_PORT_WIDTH(crtc_state->lane_count); |
| } |
| |
| if (IS_DISPLAY_VER(dev_priv, 8, 10) && |
| crtc_state->master_transcoder != INVALID_TRANSCODER) { |
| u8 master_select = |
| bdw_trans_port_sync_master_select(crtc_state->master_transcoder); |
| |
| temp |= TRANS_DDI_PORT_SYNC_ENABLE | |
| TRANS_DDI_PORT_SYNC_MASTER_SELECT(master_select); |
| } |
| |
| return temp; |
| } |
| |
| void intel_ddi_enable_transcoder_func(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (DISPLAY_VER(dev_priv) >= 11) { |
| enum transcoder master_transcoder = crtc_state->master_transcoder; |
| u32 ctl2 = 0; |
| |
| if (master_transcoder != INVALID_TRANSCODER) { |
| u8 master_select = |
| bdw_trans_port_sync_master_select(master_transcoder); |
| |
| ctl2 |= PORT_SYNC_MODE_ENABLE | |
| PORT_SYNC_MODE_MASTER_SELECT(master_select); |
| } |
| |
| intel_de_write(dev_priv, |
| TRANS_DDI_FUNC_CTL2(cpu_transcoder), ctl2); |
| } |
| |
| intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), |
| intel_ddi_transcoder_func_reg_val_get(encoder, |
| crtc_state)); |
| } |
| |
| /* |
| * Same as intel_ddi_enable_transcoder_func(), but it does not set the enable |
| * bit. |
| */ |
| static void |
| intel_ddi_config_transcoder_func(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| u32 ctl; |
| |
| ctl = intel_ddi_transcoder_func_reg_val_get(encoder, crtc_state); |
| ctl &= ~TRANS_DDI_FUNC_ENABLE; |
| intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), ctl); |
| } |
| |
| void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| u32 ctl; |
| |
| if (DISPLAY_VER(dev_priv) >= 11) |
| intel_de_write(dev_priv, |
| TRANS_DDI_FUNC_CTL2(cpu_transcoder), 0); |
| |
| ctl = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| |
| drm_WARN_ON(crtc->base.dev, ctl & TRANS_DDI_HDCP_SIGNALLING); |
| |
| ctl &= ~TRANS_DDI_FUNC_ENABLE; |
| |
| if (IS_DISPLAY_VER(dev_priv, 8, 10)) |
| ctl &= ~(TRANS_DDI_PORT_SYNC_ENABLE | |
| TRANS_DDI_PORT_SYNC_MASTER_SELECT_MASK); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| if (!intel_dp_mst_is_master_trans(crtc_state)) { |
| ctl &= ~(TGL_TRANS_DDI_PORT_MASK | |
| TRANS_DDI_MODE_SELECT_MASK); |
| } |
| } else { |
| ctl &= ~(TRANS_DDI_PORT_MASK | TRANS_DDI_MODE_SELECT_MASK); |
| } |
| |
| intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), ctl); |
| |
| if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME && |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Quirk Increase DDI disabled time\n"); |
| /* Quirk time at 100ms for reliable operation */ |
| msleep(100); |
| } |
| } |
| |
| int intel_ddi_toggle_hdcp_bits(struct intel_encoder *intel_encoder, |
| enum transcoder cpu_transcoder, |
| bool enable, u32 hdcp_mask) |
| { |
| struct drm_device *dev = intel_encoder->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| intel_wakeref_t wakeref; |
| int ret = 0; |
| u32 tmp; |
| |
| wakeref = intel_display_power_get_if_enabled(dev_priv, |
| intel_encoder->power_domain); |
| if (drm_WARN_ON(dev, !wakeref)) |
| return -ENXIO; |
| |
| tmp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| if (enable) |
| tmp |= hdcp_mask; |
| else |
| tmp &= ~hdcp_mask; |
| intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder), tmp); |
| intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref); |
| return ret; |
| } |
| |
| bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector) |
| { |
| struct drm_device *dev = intel_connector->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_encoder *encoder = intel_attached_encoder(intel_connector); |
| int type = intel_connector->base.connector_type; |
| enum port port = encoder->port; |
| enum transcoder cpu_transcoder; |
| intel_wakeref_t wakeref; |
| enum pipe pipe = 0; |
| u32 tmp; |
| bool ret; |
| |
| wakeref = intel_display_power_get_if_enabled(dev_priv, |
| encoder->power_domain); |
| if (!wakeref) |
| return false; |
| |
| if (!encoder->get_hw_state(encoder, &pipe)) { |
| ret = false; |
| goto out; |
| } |
| |
| if (HAS_TRANSCODER(dev_priv, TRANSCODER_EDP) && port == PORT_A) |
| cpu_transcoder = TRANSCODER_EDP; |
| else |
| cpu_transcoder = (enum transcoder) pipe; |
| |
| tmp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| |
| switch (tmp & TRANS_DDI_MODE_SELECT_MASK) { |
| case TRANS_DDI_MODE_SELECT_HDMI: |
| case TRANS_DDI_MODE_SELECT_DVI: |
| ret = type == DRM_MODE_CONNECTOR_HDMIA; |
| break; |
| |
| case TRANS_DDI_MODE_SELECT_DP_SST: |
| ret = type == DRM_MODE_CONNECTOR_eDP || |
| type == DRM_MODE_CONNECTOR_DisplayPort; |
| break; |
| |
| case TRANS_DDI_MODE_SELECT_DP_MST: |
| /* if the transcoder is in MST state then |
| * connector isn't connected */ |
| ret = false; |
| break; |
| |
| case TRANS_DDI_MODE_SELECT_FDI_OR_128B132B: |
| if (HAS_DP20(dev_priv)) |
| /* 128b/132b */ |
| ret = false; |
| else |
| /* FDI */ |
| ret = type == DRM_MODE_CONNECTOR_VGA; |
| break; |
| |
| default: |
| ret = false; |
| break; |
| } |
| |
| out: |
| intel_display_power_put(dev_priv, encoder->power_domain, wakeref); |
| |
| return ret; |
| } |
| |
| static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder, |
| u8 *pipe_mask, bool *is_dp_mst) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum port port = encoder->port; |
| intel_wakeref_t wakeref; |
| enum pipe p; |
| u32 tmp; |
| u8 mst_pipe_mask; |
| |
| *pipe_mask = 0; |
| *is_dp_mst = false; |
| |
| wakeref = intel_display_power_get_if_enabled(dev_priv, |
| encoder->power_domain); |
| if (!wakeref) |
| return; |
| |
| tmp = intel_de_read(dev_priv, DDI_BUF_CTL(port)); |
| if (!(tmp & DDI_BUF_CTL_ENABLE)) |
| goto out; |
| |
| if (HAS_TRANSCODER(dev_priv, TRANSCODER_EDP) && port == PORT_A) { |
| tmp = intel_de_read(dev_priv, |
| TRANS_DDI_FUNC_CTL(TRANSCODER_EDP)); |
| |
| switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { |
| default: |
| MISSING_CASE(tmp & TRANS_DDI_EDP_INPUT_MASK); |
| fallthrough; |
| case TRANS_DDI_EDP_INPUT_A_ON: |
| case TRANS_DDI_EDP_INPUT_A_ONOFF: |
| *pipe_mask = BIT(PIPE_A); |
| break; |
| case TRANS_DDI_EDP_INPUT_B_ONOFF: |
| *pipe_mask = BIT(PIPE_B); |
| break; |
| case TRANS_DDI_EDP_INPUT_C_ONOFF: |
| *pipe_mask = BIT(PIPE_C); |
| break; |
| } |
| |
| goto out; |
| } |
| |
| mst_pipe_mask = 0; |
| for_each_pipe(dev_priv, p) { |
| enum transcoder cpu_transcoder = (enum transcoder)p; |
| unsigned int port_mask, ddi_select; |
| intel_wakeref_t trans_wakeref; |
| |
| trans_wakeref = intel_display_power_get_if_enabled(dev_priv, |
| POWER_DOMAIN_TRANSCODER(cpu_transcoder)); |
| if (!trans_wakeref) |
| continue; |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| port_mask = TGL_TRANS_DDI_PORT_MASK; |
| ddi_select = TGL_TRANS_DDI_SELECT_PORT(port); |
| } else { |
| port_mask = TRANS_DDI_PORT_MASK; |
| ddi_select = TRANS_DDI_SELECT_PORT(port); |
| } |
| |
| tmp = intel_de_read(dev_priv, |
| TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| intel_display_power_put(dev_priv, POWER_DOMAIN_TRANSCODER(cpu_transcoder), |
| trans_wakeref); |
| |
| if ((tmp & port_mask) != ddi_select) |
| continue; |
| |
| if ((tmp & TRANS_DDI_MODE_SELECT_MASK) == TRANS_DDI_MODE_SELECT_DP_MST || |
| (HAS_DP20(dev_priv) && |
| (tmp & TRANS_DDI_MODE_SELECT_MASK) == TRANS_DDI_MODE_SELECT_FDI_OR_128B132B)) |
| mst_pipe_mask |= BIT(p); |
| |
| *pipe_mask |= BIT(p); |
| } |
| |
| if (!*pipe_mask) |
| drm_dbg_kms(&dev_priv->drm, |
| "No pipe for [ENCODER:%d:%s] found\n", |
| encoder->base.base.id, encoder->base.name); |
| |
| if (!mst_pipe_mask && hweight8(*pipe_mask) > 1) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Multiple pipes for [ENCODER:%d:%s] (pipe_mask %02x)\n", |
| encoder->base.base.id, encoder->base.name, |
| *pipe_mask); |
| *pipe_mask = BIT(ffs(*pipe_mask) - 1); |
| } |
| |
| if (mst_pipe_mask && mst_pipe_mask != *pipe_mask) |
| drm_dbg_kms(&dev_priv->drm, |
| "Conflicting MST and non-MST state for [ENCODER:%d:%s] (pipe_mask %02x mst_pipe_mask %02x)\n", |
| encoder->base.base.id, encoder->base.name, |
| *pipe_mask, mst_pipe_mask); |
| else |
| *is_dp_mst = mst_pipe_mask; |
| |
| out: |
| if (*pipe_mask && (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))) { |
| tmp = intel_de_read(dev_priv, BXT_PHY_CTL(port)); |
| if ((tmp & (BXT_PHY_CMNLANE_POWERDOWN_ACK | |
| BXT_PHY_LANE_POWERDOWN_ACK | |
| BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED) |
| drm_err(&dev_priv->drm, |
| "[ENCODER:%d:%s] enabled but PHY powered down? (PHY_CTL %08x)\n", |
| encoder->base.base.id, encoder->base.name, tmp); |
| } |
| |
| intel_display_power_put(dev_priv, encoder->power_domain, wakeref); |
| } |
| |
| bool intel_ddi_get_hw_state(struct intel_encoder *encoder, |
| enum pipe *pipe) |
| { |
| u8 pipe_mask; |
| bool is_mst; |
| |
| intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst); |
| |
| if (is_mst || !pipe_mask) |
| return false; |
| |
| *pipe = ffs(pipe_mask) - 1; |
| |
| return true; |
| } |
| |
| static enum intel_display_power_domain |
| intel_ddi_main_link_aux_domain(struct intel_digital_port *dig_port) |
| { |
| /* ICL+ HW requires corresponding AUX IOs to be powered up for PSR with |
| * DC states enabled at the same time, while for driver initiated AUX |
| * transfers we need the same AUX IOs to be powered but with DC states |
| * disabled. Accordingly use the AUX power domain here which leaves DC |
| * states enabled. |
| * However, for non-A AUX ports the corresponding non-EDP transcoders |
| * would have already enabled power well 2 and DC_OFF. This means we can |
| * acquire a wider POWER_DOMAIN_AUX_{B,C,D,F} reference instead of a |
| * specific AUX_IO reference without powering up any extra wells. |
| * Note that PSR is enabled only on Port A even though this function |
| * returns the correct domain for other ports too. |
| */ |
| return dig_port->aux_ch == AUX_CH_A ? POWER_DOMAIN_AUX_IO_A : |
| intel_aux_power_domain(dig_port); |
| } |
| |
| static void intel_ddi_get_power_domains(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port; |
| enum phy phy = intel_port_to_phy(dev_priv, encoder->port); |
| |
| /* |
| * TODO: Add support for MST encoders. Atm, the following should never |
| * happen since fake-MST encoders don't set their get_power_domains() |
| * hook. |
| */ |
| if (drm_WARN_ON(&dev_priv->drm, |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST))) |
| return; |
| |
| dig_port = enc_to_dig_port(encoder); |
| |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) { |
| drm_WARN_ON(&dev_priv->drm, dig_port->ddi_io_wakeref); |
| dig_port->ddi_io_wakeref = intel_display_power_get(dev_priv, |
| dig_port->ddi_io_power_domain); |
| } |
| |
| /* |
| * AUX power is only needed for (e)DP mode, and for HDMI mode on TC |
| * ports. |
| */ |
| if (intel_crtc_has_dp_encoder(crtc_state) || |
| intel_phy_is_tc(dev_priv, phy)) { |
| drm_WARN_ON(&dev_priv->drm, dig_port->aux_wakeref); |
| dig_port->aux_wakeref = |
| intel_display_power_get(dev_priv, |
| intel_ddi_main_link_aux_domain(dig_port)); |
| } |
| } |
| |
| void intel_ddi_enable_pipe_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| enum phy phy = intel_port_to_phy(dev_priv, encoder->port); |
| u32 val; |
| |
| if (cpu_transcoder != TRANSCODER_EDP) { |
| if (DISPLAY_VER(dev_priv) >= 13) |
| val = TGL_TRANS_CLK_SEL_PORT(phy); |
| else if (DISPLAY_VER(dev_priv) >= 12) |
| val = TGL_TRANS_CLK_SEL_PORT(encoder->port); |
| else |
| val = TRANS_CLK_SEL_PORT(encoder->port); |
| |
| intel_de_write(dev_priv, TRANS_CLK_SEL(cpu_transcoder), val); |
| } |
| } |
| |
| void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (cpu_transcoder != TRANSCODER_EDP) { |
| if (DISPLAY_VER(dev_priv) >= 12) |
| intel_de_write(dev_priv, |
| TRANS_CLK_SEL(cpu_transcoder), |
| TGL_TRANS_CLK_SEL_DISABLED); |
| else |
| intel_de_write(dev_priv, |
| TRANS_CLK_SEL(cpu_transcoder), |
| TRANS_CLK_SEL_DISABLED); |
| } |
| } |
| |
| static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv, |
| enum port port, u8 iboost) |
| { |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, DISPIO_CR_TX_BMU_CR0); |
| tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port)); |
| if (iboost) |
| tmp |= iboost << BALANCE_LEG_SHIFT(port); |
| else |
| tmp |= BALANCE_LEG_DISABLE(port); |
| intel_de_write(dev_priv, DISPIO_CR_TX_BMU_CR0, tmp); |
| } |
| |
| static void skl_ddi_set_iboost(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| int level) |
| { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u8 iboost; |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) |
| iboost = intel_bios_encoder_hdmi_boost_level(encoder->devdata); |
| else |
| iboost = intel_bios_encoder_dp_boost_level(encoder->devdata); |
| |
| if (iboost == 0) { |
| const struct intel_ddi_buf_trans *trans; |
| int n_entries; |
| |
| trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries); |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, !trans)) |
| return; |
| |
| iboost = trans->entries[level].hsw.i_boost; |
| } |
| |
| /* Make sure that the requested I_boost is valid */ |
| if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) { |
| drm_err(&dev_priv->drm, "Invalid I_boost value %u\n", iboost); |
| return; |
| } |
| |
| _skl_ddi_set_iboost(dev_priv, encoder->port, iboost); |
| |
| if (encoder->port == PORT_A && dig_port->max_lanes == 4) |
| _skl_ddi_set_iboost(dev_priv, PORT_E, iboost); |
| } |
| |
| static u8 intel_ddi_dp_voltage_max(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| int n_entries; |
| |
| encoder->get_buf_trans(encoder, crtc_state, &n_entries); |
| |
| if (drm_WARN_ON(&dev_priv->drm, n_entries < 1)) |
| n_entries = 1; |
| if (drm_WARN_ON(&dev_priv->drm, |
| n_entries > ARRAY_SIZE(index_to_dp_signal_levels))) |
| n_entries = ARRAY_SIZE(index_to_dp_signal_levels); |
| |
| return index_to_dp_signal_levels[n_entries - 1] & |
| DP_TRAIN_VOLTAGE_SWING_MASK; |
| } |
| |
| /* |
| * We assume that the full set of pre-emphasis values can be |
| * used on all DDI platforms. Should that change we need to |
| * rethink this code. |
| */ |
| static u8 intel_ddi_dp_preemph_max(struct intel_dp *intel_dp) |
| { |
| return DP_TRAIN_PRE_EMPH_LEVEL_3; |
| } |
| |
| static u32 icl_combo_phy_loadgen_select(const struct intel_crtc_state *crtc_state, |
| int lane) |
| { |
| if (crtc_state->port_clock > 600000) |
| return 0; |
| |
| if (crtc_state->lane_count == 4) |
| return lane >= 1 ? LOADGEN_SELECT : 0; |
| else |
| return lane == 1 || lane == 2 ? LOADGEN_SELECT : 0; |
| } |
| |
| static void icl_ddi_combo_vswing_program(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| int level = intel_ddi_level(encoder, crtc_state, 0); |
| const struct intel_ddi_buf_trans *trans; |
| enum phy phy = intel_port_to_phy(dev_priv, encoder->port); |
| int n_entries, ln; |
| u32 val; |
| |
| trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries); |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, !trans)) |
| return; |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| val = EDP4K2K_MODE_OVRD_EN | EDP4K2K_MODE_OVRD_OPTIMIZED; |
| intel_dp->hobl_active = is_hobl_buf_trans(trans); |
| intel_de_rmw(dev_priv, ICL_PORT_CL_DW10(phy), val, |
| intel_dp->hobl_active ? val : 0); |
| } |
| |
| /* Set PORT_TX_DW5 */ |
| val = intel_de_read(dev_priv, ICL_PORT_TX_DW5_LN(0, phy)); |
| val &= ~(SCALING_MODE_SEL_MASK | RTERM_SELECT_MASK | |
| TAP2_DISABLE | TAP3_DISABLE); |
| val |= SCALING_MODE_SEL(0x2); |
| val |= RTERM_SELECT(0x6); |
| val |= TAP3_DISABLE; |
| intel_de_write(dev_priv, ICL_PORT_TX_DW5_GRP(phy), val); |
| |
| /* Program PORT_TX_DW2 */ |
| val = intel_de_read(dev_priv, ICL_PORT_TX_DW2_LN(0, phy)); |
| val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK | |
| RCOMP_SCALAR_MASK); |
| val |= SWING_SEL_UPPER(trans->entries[level].icl.dw2_swing_sel); |
| val |= SWING_SEL_LOWER(trans->entries[level].icl.dw2_swing_sel); |
| /* Program Rcomp scalar for every table entry */ |
| val |= RCOMP_SCALAR(0x98); |
| intel_de_write(dev_priv, ICL_PORT_TX_DW2_GRP(phy), val); |
| |
| /* Program PORT_TX_DW4 */ |
| /* We cannot write to GRP. It would overwrite individual loadgen. */ |
| for (ln = 0; ln < 4; ln++) { |
| val = intel_de_read(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy)); |
| val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK | |
| CURSOR_COEFF_MASK); |
| val |= POST_CURSOR_1(trans->entries[level].icl.dw4_post_cursor_1); |
| val |= POST_CURSOR_2(trans->entries[level].icl.dw4_post_cursor_2); |
| val |= CURSOR_COEFF(trans->entries[level].icl.dw4_cursor_coeff); |
| intel_de_write(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy), val); |
| } |
| |
| /* Program PORT_TX_DW7 */ |
| val = intel_de_read(dev_priv, ICL_PORT_TX_DW7_LN(0, phy)); |
| val &= ~N_SCALAR_MASK; |
| val |= N_SCALAR(trans->entries[level].icl.dw7_n_scalar); |
| intel_de_write(dev_priv, ICL_PORT_TX_DW7_GRP(phy), val); |
| } |
| |
| static void icl_combo_phy_set_signal_levels(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(dev_priv, encoder->port); |
| u32 val; |
| int ln; |
| |
| /* |
| * 1. If port type is eDP or DP, |
| * set PORT_PCS_DW1 cmnkeeper_enable to 1b, |
| * else clear to 0b. |
| */ |
| val = intel_de_read(dev_priv, ICL_PORT_PCS_DW1_LN(0, phy)); |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) |
| val &= ~COMMON_KEEPER_EN; |
| else |
| val |= COMMON_KEEPER_EN; |
| intel_de_write(dev_priv, ICL_PORT_PCS_DW1_GRP(phy), val); |
| |
| /* 2. Program loadgen select */ |
| /* |
| * Program PORT_TX_DW4 depending on Bit rate and used lanes |
| * <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1) |
| * <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0) |
| * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0) |
| */ |
| for (ln = 0; ln < 4; ln++) { |
| val = intel_de_read(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy)); |
| val &= ~LOADGEN_SELECT; |
| val |= icl_combo_phy_loadgen_select(crtc_state, ln); |
| intel_de_write(dev_priv, ICL_PORT_TX_DW4_LN(ln, phy), val); |
| } |
| |
| /* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */ |
| val = intel_de_read(dev_priv, ICL_PORT_CL_DW5(phy)); |
| val |= SUS_CLOCK_CONFIG; |
| intel_de_write(dev_priv, ICL_PORT_CL_DW5(phy), val); |
| |
| /* 4. Clear training enable to change swing values */ |
| val = intel_de_read(dev_priv, ICL_PORT_TX_DW5_LN(0, phy)); |
| val &= ~TX_TRAINING_EN; |
| intel_de_write(dev_priv, ICL_PORT_TX_DW5_GRP(phy), val); |
| |
| /* 5. Program swing and de-emphasis */ |
| icl_ddi_combo_vswing_program(encoder, crtc_state); |
| |
| /* 6. Set training enable to trigger update */ |
| val = intel_de_read(dev_priv, ICL_PORT_TX_DW5_LN(0, phy)); |
| val |= TX_TRAINING_EN; |
| intel_de_write(dev_priv, ICL_PORT_TX_DW5_GRP(phy), val); |
| } |
| |
| static void icl_mg_phy_set_signal_levels(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum tc_port tc_port = intel_port_to_tc(dev_priv, encoder->port); |
| int level = intel_ddi_level(encoder, crtc_state, 0); |
| const struct intel_ddi_buf_trans *trans; |
| int n_entries, ln; |
| u32 val; |
| |
| if (intel_tc_port_in_tbt_alt_mode(enc_to_dig_port(encoder))) |
| return; |
| |
| trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries); |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, !trans)) |
| return; |
| |
| /* Set MG_TX_LINK_PARAMS cri_use_fs32 to 0. */ |
| for (ln = 0; ln < 2; ln++) { |
| val = intel_de_read(dev_priv, MG_TX1_LINK_PARAMS(ln, tc_port)); |
| val &= ~CRI_USE_FS32; |
| intel_de_write(dev_priv, MG_TX1_LINK_PARAMS(ln, tc_port), val); |
| |
| val = intel_de_read(dev_priv, MG_TX2_LINK_PARAMS(ln, tc_port)); |
| val &= ~CRI_USE_FS32; |
| intel_de_write(dev_priv, MG_TX2_LINK_PARAMS(ln, tc_port), val); |
| } |
| |
| /* Program MG_TX_SWINGCTRL with values from vswing table */ |
| for (ln = 0; ln < 2; ln++) { |
| val = intel_de_read(dev_priv, MG_TX1_SWINGCTRL(ln, tc_port)); |
| val &= ~CRI_TXDEEMPH_OVERRIDE_17_12_MASK; |
| val |= CRI_TXDEEMPH_OVERRIDE_17_12( |
| trans->entries[level].mg.cri_txdeemph_override_17_12); |
| intel_de_write(dev_priv, MG_TX1_SWINGCTRL(ln, tc_port), val); |
| |
| val = intel_de_read(dev_priv, MG_TX2_SWINGCTRL(ln, tc_port)); |
| val &= ~CRI_TXDEEMPH_OVERRIDE_17_12_MASK; |
| val |= CRI_TXDEEMPH_OVERRIDE_17_12( |
| trans->entries[level].mg.cri_txdeemph_override_17_12); |
| intel_de_write(dev_priv, MG_TX2_SWINGCTRL(ln, tc_port), val); |
| } |
| |
| /* Program MG_TX_DRVCTRL with values from vswing table */ |
| for (ln = 0; ln < 2; ln++) { |
| val = intel_de_read(dev_priv, MG_TX1_DRVCTRL(ln, tc_port)); |
| val &= ~(CRI_TXDEEMPH_OVERRIDE_11_6_MASK | |
| CRI_TXDEEMPH_OVERRIDE_5_0_MASK); |
| val |= CRI_TXDEEMPH_OVERRIDE_5_0( |
| trans->entries[level].mg.cri_txdeemph_override_5_0) | |
| CRI_TXDEEMPH_OVERRIDE_11_6( |
| trans->entries[level].mg.cri_txdeemph_override_11_6) | |
| CRI_TXDEEMPH_OVERRIDE_EN; |
| intel_de_write(dev_priv, MG_TX1_DRVCTRL(ln, tc_port), val); |
| |
| val = intel_de_read(dev_priv, MG_TX2_DRVCTRL(ln, tc_port)); |
| val &= ~(CRI_TXDEEMPH_OVERRIDE_11_6_MASK | |
| CRI_TXDEEMPH_OVERRIDE_5_0_MASK); |
| val |= CRI_TXDEEMPH_OVERRIDE_5_0( |
| trans->entries[level].mg.cri_txdeemph_override_5_0) | |
| CRI_TXDEEMPH_OVERRIDE_11_6( |
| trans->entries[level].mg.cri_txdeemph_override_11_6) | |
| CRI_TXDEEMPH_OVERRIDE_EN; |
| intel_de_write(dev_priv, MG_TX2_DRVCTRL(ln, tc_port), val); |
| |
| /* FIXME: Program CRI_LOADGEN_SEL after the spec is updated */ |
| } |
| |
| /* |
| * Program MG_CLKHUB<LN, port being used> with value from frequency table |
| * In case of Legacy mode on MG PHY, both TX1 and TX2 enabled so use the |
| * values from table for which TX1 and TX2 enabled. |
| */ |
| for (ln = 0; ln < 2; ln++) { |
| val = intel_de_read(dev_priv, MG_CLKHUB(ln, tc_port)); |
| if (crtc_state->port_clock < 300000) |
| val |= CFG_LOW_RATE_LKREN_EN; |
| else |
| val &= ~CFG_LOW_RATE_LKREN_EN; |
| intel_de_write(dev_priv, MG_CLKHUB(ln, tc_port), val); |
| } |
| |
| /* Program the MG_TX_DCC<LN, port being used> based on the link frequency */ |
| for (ln = 0; ln < 2; ln++) { |
| val = intel_de_read(dev_priv, MG_TX1_DCC(ln, tc_port)); |
| val &= ~CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK; |
| if (crtc_state->port_clock <= 500000) { |
| val &= ~CFG_AMI_CK_DIV_OVERRIDE_EN; |
| } else { |
| val |= CFG_AMI_CK_DIV_OVERRIDE_EN | |
| CFG_AMI_CK_DIV_OVERRIDE_VAL(1); |
| } |
| intel_de_write(dev_priv, MG_TX1_DCC(ln, tc_port), val); |
| |
| val = intel_de_read(dev_priv, MG_TX2_DCC(ln, tc_port)); |
| val &= ~CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK; |
| if (crtc_state->port_clock <= 500000) { |
| val &= ~CFG_AMI_CK_DIV_OVERRIDE_EN; |
| } else { |
| val |= CFG_AMI_CK_DIV_OVERRIDE_EN | |
| CFG_AMI_CK_DIV_OVERRIDE_VAL(1); |
| } |
| intel_de_write(dev_priv, MG_TX2_DCC(ln, tc_port), val); |
| } |
| |
| /* Program MG_TX_PISO_READLOAD with values from vswing table */ |
| for (ln = 0; ln < 2; ln++) { |
| val = intel_de_read(dev_priv, |
| MG_TX1_PISO_READLOAD(ln, tc_port)); |
| val |= CRI_CALCINIT; |
| intel_de_write(dev_priv, MG_TX1_PISO_READLOAD(ln, tc_port), |
| val); |
| |
| val = intel_de_read(dev_priv, |
| MG_TX2_PISO_READLOAD(ln, tc_port)); |
| val |= CRI_CALCINIT; |
| intel_de_write(dev_priv, MG_TX2_PISO_READLOAD(ln, tc_port), |
| val); |
| } |
| } |
| |
| static void tgl_dkl_phy_set_signal_levels(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum tc_port tc_port = intel_port_to_tc(dev_priv, encoder->port); |
| int level = intel_ddi_level(encoder, crtc_state, 0); |
| const struct intel_ddi_buf_trans *trans; |
| u32 val, dpcnt_mask, dpcnt_val; |
| int n_entries, ln; |
| |
| if (intel_tc_port_in_tbt_alt_mode(enc_to_dig_port(encoder))) |
| return; |
| |
| trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries); |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, !trans)) |
| return; |
| |
| dpcnt_mask = (DKL_TX_PRESHOOT_COEFF_MASK | |
| DKL_TX_DE_EMPAHSIS_COEFF_MASK | |
| DKL_TX_VSWING_CONTROL_MASK); |
| dpcnt_val = DKL_TX_VSWING_CONTROL(trans->entries[level].dkl.vswing); |
| dpcnt_val |= DKL_TX_DE_EMPHASIS_COEFF(trans->entries[level].dkl.de_emphasis); |
| dpcnt_val |= DKL_TX_PRESHOOT_COEFF(trans->entries[level].dkl.preshoot); |
| |
| for (ln = 0; ln < 2; ln++) { |
| intel_de_write(dev_priv, HIP_INDEX_REG(tc_port), |
| HIP_INDEX_VAL(tc_port, ln)); |
| |
| intel_de_write(dev_priv, DKL_TX_PMD_LANE_SUS(tc_port), 0); |
| |
| /* All the registers are RMW */ |
| val = intel_de_read(dev_priv, DKL_TX_DPCNTL0(tc_port)); |
| val &= ~dpcnt_mask; |
| val |= dpcnt_val; |
| intel_de_write(dev_priv, DKL_TX_DPCNTL0(tc_port), val); |
| |
| val = intel_de_read(dev_priv, DKL_TX_DPCNTL1(tc_port)); |
| val &= ~dpcnt_mask; |
| val |= dpcnt_val; |
| intel_de_write(dev_priv, DKL_TX_DPCNTL1(tc_port), val); |
| |
| val = intel_de_read(dev_priv, DKL_TX_DPCNTL2(tc_port)); |
| val &= ~DKL_TX_DP20BITMODE; |
| intel_de_write(dev_priv, DKL_TX_DPCNTL2(tc_port), val); |
| } |
| } |
| |
| static int translate_signal_level(struct intel_dp *intel_dp, |
| u8 signal_levels) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(index_to_dp_signal_levels); i++) { |
| if (index_to_dp_signal_levels[i] == signal_levels) |
| return i; |
| } |
| |
| drm_WARN(&i915->drm, 1, |
| "Unsupported voltage swing/pre-emphasis level: 0x%x\n", |
| signal_levels); |
| |
| return 0; |
| } |
| |
| static int intel_ddi_dp_level(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| int lane) |
| { |
| u8 train_set = intel_dp->train_set[lane]; |
| |
| if (intel_dp_is_uhbr(crtc_state)) { |
| return train_set & DP_TX_FFE_PRESET_VALUE_MASK; |
| } else { |
| u8 signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | |
| DP_TRAIN_PRE_EMPHASIS_MASK); |
| |
| return translate_signal_level(intel_dp, signal_levels); |
| } |
| } |
| |
| int intel_ddi_level(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| int lane) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_ddi_buf_trans *trans; |
| int level, n_entries; |
| |
| trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries); |
| if (drm_WARN_ON_ONCE(&i915->drm, !trans)) |
| return 0; |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) |
| level = intel_ddi_hdmi_level(encoder, trans); |
| else |
| level = intel_ddi_dp_level(enc_to_intel_dp(encoder), crtc_state, |
| lane); |
| |
| if (drm_WARN_ON_ONCE(&i915->drm, level >= n_entries)) |
| level = n_entries - 1; |
| |
| return level; |
| } |
| |
| static void |
| hsw_set_signal_levels(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| int level = intel_ddi_level(encoder, crtc_state, 0); |
| enum port port = encoder->port; |
| u32 signal_levels; |
| |
| if (has_iboost(dev_priv)) |
| skl_ddi_set_iboost(encoder, crtc_state, level); |
| |
| /* HDMI ignores the rest */ |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) |
| return; |
| |
| signal_levels = DDI_BUF_TRANS_SELECT(level); |
| |
| drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n", |
| signal_levels); |
| |
| intel_dp->DP &= ~DDI_BUF_EMP_MASK; |
| intel_dp->DP |= signal_levels; |
| |
| intel_de_write(dev_priv, DDI_BUF_CTL(port), intel_dp->DP); |
| intel_de_posting_read(dev_priv, DDI_BUF_CTL(port)); |
| } |
| |
| static void _icl_ddi_enable_clock(struct drm_i915_private *i915, i915_reg_t reg, |
| u32 clk_sel_mask, u32 clk_sel, u32 clk_off) |
| { |
| mutex_lock(&i915->dpll.lock); |
| |
| intel_de_rmw(i915, reg, clk_sel_mask, clk_sel); |
| |
| /* |
| * "This step and the step before must be |
| * done with separate register writes." |
| */ |
| intel_de_rmw(i915, reg, clk_off, 0); |
| |
| mutex_unlock(&i915->dpll.lock); |
| } |
| |
| static void _icl_ddi_disable_clock(struct drm_i915_private *i915, i915_reg_t reg, |
| u32 clk_off) |
| { |
| mutex_lock(&i915->dpll.lock); |
| |
| intel_de_rmw(i915, reg, 0, clk_off); |
| |
| mutex_unlock(&i915->dpll.lock); |
| } |
| |
| static bool _icl_ddi_is_clock_enabled(struct drm_i915_private *i915, i915_reg_t reg, |
| u32 clk_off) |
| { |
| return !(intel_de_read(i915, reg) & clk_off); |
| } |
| |
| static struct intel_shared_dpll * |
| _icl_ddi_get_pll(struct drm_i915_private *i915, i915_reg_t reg, |
| u32 clk_sel_mask, u32 clk_sel_shift) |
| { |
| enum intel_dpll_id id; |
| |
| id = (intel_de_read(i915, reg) & clk_sel_mask) >> clk_sel_shift; |
| |
| return intel_get_shared_dpll_by_id(i915, id); |
| } |
| |
| static void adls_ddi_enable_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_shared_dpll *pll = crtc_state->shared_dpll; |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| _icl_ddi_enable_clock(i915, ADLS_DPCLKA_CFGCR(phy), |
| ADLS_DPCLKA_CFGCR_DDI_CLK_SEL_MASK(phy), |
| pll->info->id << ADLS_DPCLKA_CFGCR_DDI_SHIFT(phy), |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static void adls_ddi_disable_clock(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| _icl_ddi_disable_clock(i915, ADLS_DPCLKA_CFGCR(phy), |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static bool adls_ddi_is_clock_enabled(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| return _icl_ddi_is_clock_enabled(i915, ADLS_DPCLKA_CFGCR(phy), |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static struct intel_shared_dpll *adls_ddi_get_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| return _icl_ddi_get_pll(i915, ADLS_DPCLKA_CFGCR(phy), |
| ADLS_DPCLKA_CFGCR_DDI_CLK_SEL_MASK(phy), |
| ADLS_DPCLKA_CFGCR_DDI_SHIFT(phy)); |
| } |
| |
| static void rkl_ddi_enable_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_shared_dpll *pll = crtc_state->shared_dpll; |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| _icl_ddi_enable_clock(i915, ICL_DPCLKA_CFGCR0, |
| RKL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), |
| RKL_DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, phy), |
| RKL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static void rkl_ddi_disable_clock(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| _icl_ddi_disable_clock(i915, ICL_DPCLKA_CFGCR0, |
| RKL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static bool rkl_ddi_is_clock_enabled(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| return _icl_ddi_is_clock_enabled(i915, ICL_DPCLKA_CFGCR0, |
| RKL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static struct intel_shared_dpll *rkl_ddi_get_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| return _icl_ddi_get_pll(i915, ICL_DPCLKA_CFGCR0, |
| RKL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), |
| RKL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy)); |
| } |
| |
| static void dg1_ddi_enable_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_shared_dpll *pll = crtc_state->shared_dpll; |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| /* |
| * If we fail this, something went very wrong: first 2 PLLs should be |
| * used by first 2 phys and last 2 PLLs by last phys |
| */ |
| if (drm_WARN_ON(&i915->drm, |
| (pll->info->id < DPLL_ID_DG1_DPLL2 && phy >= PHY_C) || |
| (pll->info->id >= DPLL_ID_DG1_DPLL2 && phy < PHY_C))) |
| return; |
| |
| _icl_ddi_enable_clock(i915, DG1_DPCLKA_CFGCR0(phy), |
| DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), |
| DG1_DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, phy), |
| DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static void dg1_ddi_disable_clock(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| _icl_ddi_disable_clock(i915, DG1_DPCLKA_CFGCR0(phy), |
| DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static bool dg1_ddi_is_clock_enabled(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| return _icl_ddi_is_clock_enabled(i915, DG1_DPCLKA_CFGCR0(phy), |
| DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static struct intel_shared_dpll *dg1_ddi_get_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| enum intel_dpll_id id; |
| u32 val; |
| |
| val = intel_de_read(i915, DG1_DPCLKA_CFGCR0(phy)); |
| val &= DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy); |
| val >>= DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy); |
| id = val; |
| |
| /* |
| * _DG1_DPCLKA0_CFGCR0 maps between DPLL 0 and 1 with one bit for phy A |
| * and B while _DG1_DPCLKA1_CFGCR0 maps between DPLL 2 and 3 with one |
| * bit for phy C and D. |
| */ |
| if (phy >= PHY_C) |
| id += DPLL_ID_DG1_DPLL2; |
| |
| return intel_get_shared_dpll_by_id(i915, id); |
| } |
| |
| static void icl_ddi_combo_enable_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_shared_dpll *pll = crtc_state->shared_dpll; |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| _icl_ddi_enable_clock(i915, ICL_DPCLKA_CFGCR0, |
| ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), |
| ICL_DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, phy), |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static void icl_ddi_combo_disable_clock(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| _icl_ddi_disable_clock(i915, ICL_DPCLKA_CFGCR0, |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| static bool icl_ddi_combo_is_clock_enabled(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| return _icl_ddi_is_clock_enabled(i915, ICL_DPCLKA_CFGCR0, |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); |
| } |
| |
| struct intel_shared_dpll *icl_ddi_combo_get_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| return _icl_ddi_get_pll(i915, ICL_DPCLKA_CFGCR0, |
| ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), |
| ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy)); |
| } |
| |
| static void jsl_ddi_tc_enable_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_shared_dpll *pll = crtc_state->shared_dpll; |
| enum port port = encoder->port; |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| /* |
| * "For DDIC and DDID, program DDI_CLK_SEL to map the MG clock to the port. |
| * MG does not exist, but the programming is required to ungate DDIC and DDID." |
| */ |
| intel_de_write(i915, DDI_CLK_SEL(port), DDI_CLK_SEL_MG); |
| |
| icl_ddi_combo_enable_clock(encoder, crtc_state); |
| } |
| |
| static void jsl_ddi_tc_disable_clock(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| |
| icl_ddi_combo_disable_clock(encoder); |
| |
| intel_de_write(i915, DDI_CLK_SEL(port), DDI_CLK_SEL_NONE); |
| } |
| |
| static bool jsl_ddi_tc_is_clock_enabled(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| u32 tmp; |
| |
| tmp = intel_de_read(i915, DDI_CLK_SEL(port)); |
| |
| if ((tmp & DDI_CLK_SEL_MASK) == DDI_CLK_SEL_NONE) |
| return false; |
| |
| return icl_ddi_combo_is_clock_enabled(encoder); |
| } |
| |
| static void icl_ddi_tc_enable_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_shared_dpll *pll = crtc_state->shared_dpll; |
| enum tc_port tc_port = intel_port_to_tc(i915, encoder->port); |
| enum port port = encoder->port; |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| intel_de_write(i915, DDI_CLK_SEL(port), |
| icl_pll_to_ddi_clk_sel(encoder, crtc_state)); |
| |
| mutex_lock(&i915->dpll.lock); |
| |
| intel_de_rmw(i915, ICL_DPCLKA_CFGCR0, |
| ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port), 0); |
| |
| mutex_unlock(&i915->dpll.lock); |
| } |
| |
| static void icl_ddi_tc_disable_clock(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum tc_port tc_port = intel_port_to_tc(i915, encoder->port); |
| enum port port = encoder->port; |
| |
| mutex_lock(&i915->dpll.lock); |
| |
| intel_de_rmw(i915, ICL_DPCLKA_CFGCR0, |
| 0, ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port)); |
| |
| mutex_unlock(&i915->dpll.lock); |
| |
| intel_de_write(i915, DDI_CLK_SEL(port), DDI_CLK_SEL_NONE); |
| } |
| |
| static bool icl_ddi_tc_is_clock_enabled(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum tc_port tc_port = intel_port_to_tc(i915, encoder->port); |
| enum port port = encoder->port; |
| u32 tmp; |
| |
| tmp = intel_de_read(i915, DDI_CLK_SEL(port)); |
| |
| if ((tmp & DDI_CLK_SEL_MASK) == DDI_CLK_SEL_NONE) |
| return false; |
| |
| tmp = intel_de_read(i915, ICL_DPCLKA_CFGCR0); |
| |
| return !(tmp & ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port)); |
| } |
| |
| static struct intel_shared_dpll *icl_ddi_tc_get_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum tc_port tc_port = intel_port_to_tc(i915, encoder->port); |
| enum port port = encoder->port; |
| enum intel_dpll_id id; |
| u32 tmp; |
| |
| tmp = intel_de_read(i915, DDI_CLK_SEL(port)); |
| |
| switch (tmp & DDI_CLK_SEL_MASK) { |
| case DDI_CLK_SEL_TBT_162: |
| case DDI_CLK_SEL_TBT_270: |
| case DDI_CLK_SEL_TBT_540: |
| case DDI_CLK_SEL_TBT_810: |
| id = DPLL_ID_ICL_TBTPLL; |
| break; |
| case DDI_CLK_SEL_MG: |
| id = icl_tc_port_to_pll_id(tc_port); |
| break; |
| default: |
| MISSING_CASE(tmp); |
| fallthrough; |
| case DDI_CLK_SEL_NONE: |
| return NULL; |
| } |
| |
| return intel_get_shared_dpll_by_id(i915, id); |
| } |
| |
| static struct intel_shared_dpll *bxt_ddi_get_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum intel_dpll_id id; |
| |
| switch (encoder->port) { |
| case PORT_A: |
| id = DPLL_ID_SKL_DPLL0; |
| break; |
| case PORT_B: |
| id = DPLL_ID_SKL_DPLL1; |
| break; |
| case PORT_C: |
| id = DPLL_ID_SKL_DPLL2; |
| break; |
| default: |
| MISSING_CASE(encoder->port); |
| return NULL; |
| } |
| |
| return intel_get_shared_dpll_by_id(i915, id); |
| } |
| |
| static void skl_ddi_enable_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_shared_dpll *pll = crtc_state->shared_dpll; |
| enum port port = encoder->port; |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| mutex_lock(&i915->dpll.lock); |
| |
| intel_de_rmw(i915, DPLL_CTRL2, |
| DPLL_CTRL2_DDI_CLK_OFF(port) | |
| DPLL_CTRL2_DDI_CLK_SEL_MASK(port), |
| DPLL_CTRL2_DDI_CLK_SEL(pll->info->id, port) | |
| DPLL_CTRL2_DDI_SEL_OVERRIDE(port)); |
| |
| mutex_unlock(&i915->dpll.lock); |
| } |
| |
| static void skl_ddi_disable_clock(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| |
| mutex_lock(&i915->dpll.lock); |
| |
| intel_de_rmw(i915, DPLL_CTRL2, |
| 0, DPLL_CTRL2_DDI_CLK_OFF(port)); |
| |
| mutex_unlock(&i915->dpll.lock); |
| } |
| |
| static bool skl_ddi_is_clock_enabled(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| |
| /* |
| * FIXME Not sure if the override affects both |
| * the PLL selection and the CLK_OFF bit. |
| */ |
| return !(intel_de_read(i915, DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_OFF(port)); |
| } |
| |
| static struct intel_shared_dpll *skl_ddi_get_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| enum intel_dpll_id id; |
| u32 tmp; |
| |
| tmp = intel_de_read(i915, DPLL_CTRL2); |
| |
| /* |
| * FIXME Not sure if the override affects both |
| * the PLL selection and the CLK_OFF bit. |
| */ |
| if ((tmp & DPLL_CTRL2_DDI_SEL_OVERRIDE(port)) == 0) |
| return NULL; |
| |
| id = (tmp & DPLL_CTRL2_DDI_CLK_SEL_MASK(port)) >> |
| DPLL_CTRL2_DDI_CLK_SEL_SHIFT(port); |
| |
| return intel_get_shared_dpll_by_id(i915, id); |
| } |
| |
| void hsw_ddi_enable_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_shared_dpll *pll = crtc_state->shared_dpll; |
| enum port port = encoder->port; |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| intel_de_write(i915, PORT_CLK_SEL(port), hsw_pll_to_ddi_pll_sel(pll)); |
| } |
| |
| void hsw_ddi_disable_clock(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| |
| intel_de_write(i915, PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); |
| } |
| |
| bool hsw_ddi_is_clock_enabled(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| |
| return intel_de_read(i915, PORT_CLK_SEL(port)) != PORT_CLK_SEL_NONE; |
| } |
| |
| static struct intel_shared_dpll *hsw_ddi_get_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| enum intel_dpll_id id; |
| u32 tmp; |
| |
| tmp = intel_de_read(i915, PORT_CLK_SEL(port)); |
| |
| switch (tmp & PORT_CLK_SEL_MASK) { |
| case PORT_CLK_SEL_WRPLL1: |
| id = DPLL_ID_WRPLL1; |
| break; |
| case PORT_CLK_SEL_WRPLL2: |
| id = DPLL_ID_WRPLL2; |
| break; |
| case PORT_CLK_SEL_SPLL: |
| id = DPLL_ID_SPLL; |
| break; |
| case PORT_CLK_SEL_LCPLL_810: |
| id = DPLL_ID_LCPLL_810; |
| break; |
| case PORT_CLK_SEL_LCPLL_1350: |
| id = DPLL_ID_LCPLL_1350; |
| break; |
| case PORT_CLK_SEL_LCPLL_2700: |
| id = DPLL_ID_LCPLL_2700; |
| break; |
| default: |
| MISSING_CASE(tmp); |
| fallthrough; |
| case PORT_CLK_SEL_NONE: |
| return NULL; |
| } |
| |
| return intel_get_shared_dpll_by_id(i915, id); |
| } |
| |
| void intel_ddi_enable_clock(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| if (encoder->enable_clock) |
| encoder->enable_clock(encoder, crtc_state); |
| } |
| |
| static void intel_ddi_disable_clock(struct intel_encoder *encoder) |
| { |
| if (encoder->disable_clock) |
| encoder->disable_clock(encoder); |
| } |
| |
| void intel_ddi_sanitize_encoder_pll_mapping(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| u32 port_mask; |
| bool ddi_clk_needed; |
| |
| /* |
| * In case of DP MST, we sanitize the primary encoder only, not the |
| * virtual ones. |
| */ |
| if (encoder->type == INTEL_OUTPUT_DP_MST) |
| return; |
| |
| if (!encoder->base.crtc && intel_encoder_is_dp(encoder)) { |
| u8 pipe_mask; |
| bool is_mst; |
| |
| intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst); |
| /* |
| * In the unlikely case that BIOS enables DP in MST mode, just |
| * warn since our MST HW readout is incomplete. |
| */ |
| if (drm_WARN_ON(&i915->drm, is_mst)) |
| return; |
| } |
| |
| port_mask = BIT(encoder->port); |
| ddi_clk_needed = encoder->base.crtc; |
| |
| if (encoder->type == INTEL_OUTPUT_DSI) { |
| struct intel_encoder *other_encoder; |
| |
| port_mask = intel_dsi_encoder_ports(encoder); |
| /* |
| * Sanity check that we haven't incorrectly registered another |
| * encoder using any of the ports of this DSI encoder. |
| */ |
| for_each_intel_encoder(&i915->drm, other_encoder) { |
| if (other_encoder == encoder) |
| continue; |
| |
| if (drm_WARN_ON(&i915->drm, |
| port_mask & BIT(other_encoder->port))) |
| return; |
| } |
| /* |
| * For DSI we keep the ddi clocks gated |
| * except during enable/disable sequence. |
| */ |
| ddi_clk_needed = false; |
| } |
| |
| if (ddi_clk_needed || !encoder->is_clock_enabled || |
| !encoder->is_clock_enabled(encoder)) |
| return; |
| |
| drm_notice(&i915->drm, |
| "[ENCODER:%d:%s] is disabled/in DSI mode with an ungated DDI clock, gate it\n", |
| encoder->base.base.id, encoder->base.name); |
| |
| encoder->disable_clock(encoder); |
| } |
| |
| static void |
| icl_program_mg_dp_mode(struct intel_digital_port *dig_port, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); |
| enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port->base.port); |
| enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port); |
| u32 ln0, ln1, pin_assignment; |
| u8 width; |
| |
| if (!intel_phy_is_tc(dev_priv, phy) || |
| intel_tc_port_in_tbt_alt_mode(dig_port)) |
| return; |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| intel_de_write(dev_priv, HIP_INDEX_REG(tc_port), |
| HIP_INDEX_VAL(tc_port, 0x0)); |
| ln0 = intel_de_read(dev_priv, DKL_DP_MODE(tc_port)); |
| intel_de_write(dev_priv, HIP_INDEX_REG(tc_port), |
| HIP_INDEX_VAL(tc_port, 0x1)); |
| ln1 = intel_de_read(dev_priv, DKL_DP_MODE(tc_port)); |
| } else { |
| ln0 = intel_de_read(dev_priv, MG_DP_MODE(0, tc_port)); |
| ln1 = intel_de_read(dev_priv, MG_DP_MODE(1, tc_port)); |
| } |
| |
| ln0 &= ~(MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE); |
| ln1 &= ~(MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE); |
| |
| /* DPPATC */ |
| pin_assignment = intel_tc_port_get_pin_assignment_mask(dig_port); |
| width = crtc_state->lane_count; |
| |
| switch (pin_assignment) { |
| case 0x0: |
| drm_WARN_ON(&dev_priv->drm, |
| !intel_tc_port_in_legacy_mode(dig_port)); |
| if (width == 1) { |
| ln1 |= MG_DP_MODE_CFG_DP_X1_MODE; |
| } else { |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| } |
| break; |
| case 0x1: |
| if (width == 4) { |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| } |
| break; |
| case 0x2: |
| if (width == 2) { |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| } |
| break; |
| case 0x3: |
| case 0x5: |
| if (width == 1) { |
| ln0 |= MG_DP_MODE_CFG_DP_X1_MODE; |
| ln1 |= MG_DP_MODE_CFG_DP_X1_MODE; |
| } else { |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| } |
| break; |
| case 0x4: |
| case 0x6: |
| if (width == 1) { |
| ln0 |= MG_DP_MODE_CFG_DP_X1_MODE; |
| ln1 |= MG_DP_MODE_CFG_DP_X1_MODE; |
| } else { |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; |
| } |
| break; |
| default: |
| MISSING_CASE(pin_assignment); |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| intel_de_write(dev_priv, HIP_INDEX_REG(tc_port), |
| HIP_INDEX_VAL(tc_port, 0x0)); |
| intel_de_write(dev_priv, DKL_DP_MODE(tc_port), ln0); |
| intel_de_write(dev_priv, HIP_INDEX_REG(tc_port), |
| HIP_INDEX_VAL(tc_port, 0x1)); |
| intel_de_write(dev_priv, DKL_DP_MODE(tc_port), ln1); |
| } else { |
| intel_de_write(dev_priv, MG_DP_MODE(0, tc_port), ln0); |
| intel_de_write(dev_priv, MG_DP_MODE(1, tc_port), ln1); |
| } |
| } |
| |
| static enum transcoder |
| tgl_dp_tp_transcoder(const struct intel_crtc_state *crtc_state) |
| { |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) |
| return crtc_state->mst_master_transcoder; |
| else |
| return crtc_state->cpu_transcoder; |
| } |
| |
| i915_reg_t dp_tp_ctl_reg(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| return TGL_DP_TP_CTL(tgl_dp_tp_transcoder(crtc_state)); |
| else |
| return DP_TP_CTL(encoder->port); |
| } |
| |
| i915_reg_t dp_tp_status_reg(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| return TGL_DP_TP_STATUS(tgl_dp_tp_transcoder(crtc_state)); |
| else |
| return DP_TP_STATUS(encoder->port); |
| } |
| |
| static void intel_dp_sink_set_msa_timing_par_ignore_state(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| bool enable) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| if (!crtc_state->vrr.enable) |
| return; |
| |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_DOWNSPREAD_CTRL, |
| enable ? DP_MSA_TIMING_PAR_IGNORE_EN : 0) <= 0) |
| drm_dbg_kms(&i915->drm, |
| "Failed to %s MSA_TIMING_PAR_IGNORE in the sink\n", |
| enabledisable(enable)); |
| } |
| |
| static void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| if (!crtc_state->fec_enable) |
| return; |
| |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_FEC_CONFIGURATION, DP_FEC_READY) <= 0) |
| drm_dbg_kms(&i915->drm, |
| "Failed to set FEC_READY in the sink\n"); |
| } |
| |
| static void intel_ddi_enable_fec(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp; |
| u32 val; |
| |
| if (!crtc_state->fec_enable) |
| return; |
| |
| intel_dp = enc_to_intel_dp(encoder); |
| val = intel_de_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state)); |
| val |= DP_TP_CTL_FEC_ENABLE; |
| intel_de_write(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), val); |
| } |
| |
| static void intel_ddi_disable_fec_state(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp; |
| u32 val; |
| |
| if (!crtc_state->fec_enable) |
| return; |
| |
| intel_dp = enc_to_intel_dp(encoder); |
| val = intel_de_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state)); |
| val &= ~DP_TP_CTL_FEC_ENABLE; |
| intel_de_write(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), val); |
| intel_de_posting_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state)); |
| } |
| |
| static void intel_ddi_power_up_lanes(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| if (intel_phy_is_combo(i915, phy)) { |
| bool lane_reversal = |
| dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL; |
| |
| intel_combo_phy_power_up_lanes(i915, phy, false, |
| crtc_state->lane_count, |
| lane_reversal); |
| } |
| } |
| |
| /* Splitter enable for eDP MSO is limited to certain pipes. */ |
| static u8 intel_ddi_splitter_pipe_mask(struct drm_i915_private *i915) |
| { |
| if (IS_ALDERLAKE_P(i915)) |
| return BIT(PIPE_A) | BIT(PIPE_B); |
| else |
| return BIT(PIPE_A); |
| } |
| |
| static void intel_ddi_mso_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| u32 dss1; |
| |
| if (!HAS_MSO(i915)) |
| return; |
| |
| dss1 = intel_de_read(i915, ICL_PIPE_DSS_CTL1(pipe)); |
| |
| pipe_config->splitter.enable = dss1 & SPLITTER_ENABLE; |
| if (!pipe_config->splitter.enable) |
| return; |
| |
| if (drm_WARN_ON(&i915->drm, !(intel_ddi_splitter_pipe_mask(i915) & BIT(pipe)))) { |
| pipe_config->splitter.enable = false; |
| return; |
| } |
| |
| switch (dss1 & SPLITTER_CONFIGURATION_MASK) { |
| default: |
| drm_WARN(&i915->drm, true, |
| "Invalid splitter configuration, dss1=0x%08x\n", dss1); |
| fallthrough; |
| case SPLITTER_CONFIGURATION_2_SEGMENT: |
| pipe_config->splitter.link_count = 2; |
| break; |
| case SPLITTER_CONFIGURATION_4_SEGMENT: |
| pipe_config->splitter.link_count = 4; |
| break; |
| } |
| |
| pipe_config->splitter.pixel_overlap = REG_FIELD_GET(OVERLAP_PIXELS_MASK, dss1); |
| } |
| |
| static void intel_ddi_mso_configure(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| u32 dss1 = 0; |
| |
| if (!HAS_MSO(i915)) |
| return; |
| |
| if (crtc_state->splitter.enable) { |
| dss1 |= SPLITTER_ENABLE; |
| dss1 |= OVERLAP_PIXELS(crtc_state->splitter.pixel_overlap); |
| if (crtc_state->splitter.link_count == 2) |
| dss1 |= SPLITTER_CONFIGURATION_2_SEGMENT; |
| else |
| dss1 |= SPLITTER_CONFIGURATION_4_SEGMENT; |
| } |
| |
| intel_de_rmw(i915, ICL_PIPE_DSS_CTL1(pipe), |
| SPLITTER_ENABLE | SPLITTER_CONFIGURATION_MASK | |
| OVERLAP_PIXELS_MASK, dss1); |
| } |
| |
| static void dg2_ddi_pre_enable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST); |
| |
| intel_dp_set_link_params(intel_dp, crtc_state->port_clock, |
| crtc_state->lane_count); |
| |
| /* |
| * We only configure what the register value will be here. Actual |
| * enabling happens during link training farther down. |
| */ |
| intel_ddi_init_dp_buf_reg(encoder, crtc_state); |
| |
| /* |
| * 1. Enable Power Wells |
| * |
| * This was handled at the beginning of intel_atomic_commit_tail(), |
| * before we called down into this function. |
| */ |
| |
| /* 2. Enable Panel Power if PPS is required */ |
| intel_pps_on(intel_dp); |
| |
| /* |
| * 3. Enable the port PLL. |
| */ |
| intel_ddi_enable_clock(encoder, crtc_state); |
| |
| /* 4. Enable IO power */ |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) |
| dig_port->ddi_io_wakeref = intel_display_power_get(dev_priv, |
| dig_port->ddi_io_power_domain); |
| |
| /* |
| * 5. The rest of the below are substeps under the bspec's "Enable and |
| * Train Display Port" step. Note that steps that are specific to |
| * MST will be handled by intel_mst_pre_enable_dp() before/after it |
| * calls into this function. Also intel_mst_pre_enable_dp() only calls |
| * us when active_mst_links==0, so any steps designated for "single |
| * stream or multi-stream master transcoder" can just be performed |
| * unconditionally here. |
| */ |
| |
| /* |
| * 5.a Configure Transcoder Clock Select to direct the Port clock to the |
| * Transcoder. |
| */ |
| intel_ddi_enable_pipe_clock(encoder, crtc_state); |
| |
| /* 5.b Configure transcoder for DP 2.0 128b/132b */ |
| intel_ddi_config_transcoder_dp2(encoder, crtc_state); |
| |
| /* |
| * 5.c Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST |
| * Transport Select |
| */ |
| intel_ddi_config_transcoder_func(encoder, crtc_state); |
| |
| /* |
| * 5.d Configure & enable DP_TP_CTL with link training pattern 1 |
| * selected |
| * |
| * This will be handled by the intel_dp_start_link_train() farther |
| * down this function. |
| */ |
| |
| /* 5.e Configure voltage swing and related IO settings */ |
| encoder->set_signal_levels(encoder, crtc_state); |
| |
| if (!is_mst) |
| intel_dp_set_power(intel_dp, DP_SET_POWER_D0); |
| |
| intel_dp_configure_protocol_converter(intel_dp, crtc_state); |
| intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); |
| /* |
| * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit |
| * in the FEC_CONFIGURATION register to 1 before initiating link |
| * training |
| */ |
| intel_dp_sink_set_fec_ready(intel_dp, crtc_state); |
| intel_dp_check_frl_training(intel_dp); |
| intel_dp_pcon_dsc_configure(intel_dp, crtc_state); |
| |
| /* |
| * 5.h Follow DisplayPort specification training sequence (see notes for |
| * failure handling) |
| * 5.i If DisplayPort multi-stream - Set DP_TP_CTL link training to Idle |
| * Pattern, wait for 5 idle patterns (DP_TP_STATUS Min_Idles_Sent) |
| * (timeout after 800 us) |
| */ |
| intel_dp_start_link_train(intel_dp, crtc_state); |
| |
| /* 5.j Set DP_TP_CTL link training to Normal */ |
| if (!is_trans_port_sync_mode(crtc_state)) |
| intel_dp_stop_link_train(intel_dp, crtc_state); |
| |
| /* 5.k Configure and enable FEC if needed */ |
| intel_ddi_enable_fec(encoder, crtc_state); |
| intel_dsc_enable(encoder, crtc_state); |
| } |
| |
| static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST); |
| |
| intel_dp_set_link_params(intel_dp, |
| crtc_state->port_clock, |
| crtc_state->lane_count); |
| |
| /* |
| * We only configure what the register value will be here. Actual |
| * enabling happens during link training farther down. |
| */ |
| intel_ddi_init_dp_buf_reg(encoder, crtc_state); |
| |
| /* |
| * 1. Enable Power Wells |
| * |
| * This was handled at the beginning of intel_atomic_commit_tail(), |
| * before we called down into this function. |
| */ |
| |
| /* 2. Enable Panel Power if PPS is required */ |
| intel_pps_on(intel_dp); |
| |
| /* |
| * 3. For non-TBT Type-C ports, set FIA lane count |
| * (DFLEXDPSP.DPX4TXLATC) |
| * |
| * This was done before tgl_ddi_pre_enable_dp by |
| * hsw_crtc_enable()->intel_encoders_pre_pll_enable(). |
| */ |
| |
| /* |
| * 4. Enable the port PLL. |
| * |
| * The PLL enabling itself was already done before this function by |
| * hsw_crtc_enable()->intel_enable_shared_dpll(). We need only |
| * configure the PLL to port mapping here. |
| */ |
| intel_ddi_enable_clock(encoder, crtc_state); |
| |
| /* 5. If IO power is controlled through PWR_WELL_CTL, Enable IO Power */ |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) { |
| drm_WARN_ON(&dev_priv->drm, dig_port->ddi_io_wakeref); |
| dig_port->ddi_io_wakeref = intel_display_power_get(dev_priv, |
| dig_port->ddi_io_power_domain); |
| } |
| |
| /* 6. Program DP_MODE */ |
| icl_program_mg_dp_mode(dig_port, crtc_state); |
| |
| /* |
| * 7. The rest of the below are substeps under the bspec's "Enable and |
| * Train Display Port" step. Note that steps that are specific to |
| * MST will be handled by intel_mst_pre_enable_dp() before/after it |
| * calls into this function. Also intel_mst_pre_enable_dp() only calls |
| * us when active_mst_links==0, so any steps designated for "single |
| * stream or multi-stream master transcoder" can just be performed |
| * unconditionally here. |
| */ |
| |
| /* |
| * 7.a Configure Transcoder Clock Select to direct the Port clock to the |
| * Transcoder. |
| */ |
| intel_ddi_enable_pipe_clock(encoder, crtc_state); |
| |
| /* |
| * 7.b Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST |
| * Transport Select |
| */ |
| intel_ddi_config_transcoder_func(encoder, crtc_state); |
| |
| /* |
| * 7.c Configure & enable DP_TP_CTL with link training pattern 1 |
| * selected |
| * |
| * This will be handled by the intel_dp_start_link_train() farther |
| * down this function. |
| */ |
| |
| /* 7.e Configure voltage swing and related IO settings */ |
| encoder->set_signal_levels(encoder, crtc_state); |
| |
| /* |
| * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up |
| * the used lanes of the DDI. |
| */ |
| intel_ddi_power_up_lanes(encoder, crtc_state); |
| |
| /* |
| * 7.g Program CoG/MSO configuration bits in DSS_CTL1 if selected. |
| */ |
| intel_ddi_mso_configure(crtc_state); |
| |
| if (!is_mst) |
| intel_dp_set_power(intel_dp, DP_SET_POWER_D0); |
| |
| intel_dp_configure_protocol_converter(intel_dp, crtc_state); |
| intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); |
| /* |
| * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit |
| * in the FEC_CONFIGURATION register to 1 before initiating link |
| * training |
| */ |
| intel_dp_sink_set_fec_ready(intel_dp, crtc_state); |
| |
| intel_dp_check_frl_training(intel_dp); |
| intel_dp_pcon_dsc_configure(intel_dp, crtc_state); |
| |
| /* |
| * 7.i Follow DisplayPort specification training sequence (see notes for |
| * failure handling) |
| * 7.j If DisplayPort multi-stream - Set DP_TP_CTL link training to Idle |
| * Pattern, wait for 5 idle patterns (DP_TP_STATUS Min_Idles_Sent) |
| * (timeout after 800 us) |
| */ |
| intel_dp_start_link_train(intel_dp, crtc_state); |
| |
| /* 7.k Set DP_TP_CTL link training to Normal */ |
| if (!is_trans_port_sync_mode(crtc_state)) |
| intel_dp_stop_link_train(intel_dp, crtc_state); |
| |
| /* 7.l Configure and enable FEC if needed */ |
| intel_ddi_enable_fec(encoder, crtc_state); |
| if (!crtc_state->bigjoiner) |
| intel_dsc_enable(encoder, crtc_state); |
| } |
| |
| static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST); |
| |
| if (DISPLAY_VER(dev_priv) < 11) |
| drm_WARN_ON(&dev_priv->drm, |
| is_mst && (port == PORT_A || port == PORT_E)); |
| else |
| drm_WARN_ON(&dev_priv->drm, is_mst && port == PORT_A); |
| |
| intel_dp_set_link_params(intel_dp, |
| crtc_state->port_clock, |
| crtc_state->lane_count); |
| |
| /* |
| * We only configure what the register value will be here. Actual |
| * enabling happens during link training farther down. |
| */ |
| intel_ddi_init_dp_buf_reg(encoder, crtc_state); |
| |
| intel_pps_on(intel_dp); |
| |
| intel_ddi_enable_clock(encoder, crtc_state); |
| |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) { |
| drm_WARN_ON(&dev_priv->drm, dig_port->ddi_io_wakeref); |
| dig_port->ddi_io_wakeref = intel_display_power_get(dev_priv, |
| dig_port->ddi_io_power_domain); |
| } |
| |
| icl_program_mg_dp_mode(dig_port, crtc_state); |
| |
| if (has_buf_trans_select(dev_priv)) |
| hsw_prepare_dp_ddi_buffers(encoder, crtc_state); |
| |
| encoder->set_signal_levels(encoder, crtc_state); |
| |
| intel_ddi_power_up_lanes(encoder, crtc_state); |
| |
| if (!is_mst) |
| intel_dp_set_power(intel_dp, DP_SET_POWER_D0); |
| intel_dp_configure_protocol_converter(intel_dp, crtc_state); |
| intel_dp_sink_set_decompression_state(intel_dp, crtc_state, |
| true); |
| intel_dp_sink_set_fec_ready(intel_dp, crtc_state); |
| intel_dp_start_link_train(intel_dp, crtc_state); |
| if ((port != PORT_A || DISPLAY_VER(dev_priv) >= 9) && |
| !is_trans_port_sync_mode(crtc_state)) |
| intel_dp_stop_link_train(intel_dp, crtc_state); |
| |
| intel_ddi_enable_fec(encoder, crtc_state); |
| |
| if (!is_mst) |
| intel_ddi_enable_pipe_clock(encoder, crtc_state); |
| |
| if (!crtc_state->bigjoiner) |
| intel_dsc_enable(encoder, crtc_state); |
| } |
| |
| static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| |
| if (IS_DG2(dev_priv)) |
| dg2_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state); |
| else if (DISPLAY_VER(dev_priv) >= 12) |
| tgl_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state); |
| else |
| hsw_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state); |
| |
| /* MST will call a setting of MSA after an allocating of Virtual Channel |
| * from MST encoder pre_enable callback. |
| */ |
| if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) { |
| intel_ddi_set_dp_msa(crtc_state, conn_state); |
| |
| intel_dp_set_m_n(crtc_state, M1_N1); |
| } |
| } |
| |
| static void intel_ddi_pre_enable_hdmi(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct intel_hdmi *intel_hdmi = &dig_port->hdmi; |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| |
| intel_dp_dual_mode_set_tmds_output(intel_hdmi, true); |
| intel_ddi_enable_clock(encoder, crtc_state); |
| |
| drm_WARN_ON(&dev_priv->drm, dig_port->ddi_io_wakeref); |
| dig_port->ddi_io_wakeref = intel_display_power_get(dev_priv, |
| dig_port->ddi_io_power_domain); |
| |
| icl_program_mg_dp_mode(dig_port, crtc_state); |
| |
| intel_ddi_enable_pipe_clock(encoder, crtc_state); |
| |
| dig_port->set_infoframes(encoder, |
| crtc_state->has_infoframe, |
| crtc_state, conn_state); |
| } |
| |
| static void intel_ddi_pre_enable(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| /* |
| * When called from DP MST code: |
| * - conn_state will be NULL |
| * - encoder will be the main encoder (ie. mst->primary) |
| * - the main connector associated with this port |
| * won't be active or linked to a crtc |
| * - crtc_state will be the state of the first stream to |
| * be activated on this port, and it may not be the same |
| * stream that will be deactivated last, but each stream |
| * should have a state that is identical when it comes to |
| * the DP link parameteres |
| */ |
| |
| drm_WARN_ON(&dev_priv->drm, crtc_state->has_pch_encoder); |
| |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { |
| intel_ddi_pre_enable_hdmi(state, encoder, crtc_state, |
| conn_state); |
| } else { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| |
| intel_ddi_pre_enable_dp(state, encoder, crtc_state, |
| conn_state); |
| |
| /* FIXME precompute everything properly */ |
| /* FIXME how do we turn infoframes off again? */ |
| if (dig_port->lspcon.active && dig_port->dp.has_hdmi_sink) |
| dig_port->set_infoframes(encoder, |
| crtc_state->has_infoframe, |
| crtc_state, conn_state); |
| } |
| } |
| |
| static void intel_disable_ddi_buf(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| bool wait = false; |
| u32 val; |
| |
| val = intel_de_read(dev_priv, DDI_BUF_CTL(port)); |
| if (val & DDI_BUF_CTL_ENABLE) { |
| val &= ~DDI_BUF_CTL_ENABLE; |
| intel_de_write(dev_priv, DDI_BUF_CTL(port), val); |
| wait = true; |
| } |
| |
| if (intel_crtc_has_dp_encoder(crtc_state)) { |
| val = intel_de_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state)); |
| val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); |
| val |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| intel_de_write(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), val); |
| } |
| |
| /* Disable FEC in DP Sink */ |
| intel_ddi_disable_fec_state(encoder, crtc_state); |
| |
| if (wait) |
| intel_wait_ddi_buf_idle(dev_priv, port); |
| } |
| |
| static void intel_ddi_post_disable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct intel_dp *intel_dp = &dig_port->dp; |
| bool is_mst = intel_crtc_has_type(old_crtc_state, |
| INTEL_OUTPUT_DP_MST); |
| |
| if (!is_mst) |
| intel_dp_set_infoframes(encoder, false, |
| old_crtc_state, old_conn_state); |
| |
| /* |
| * Power down sink before disabling the port, otherwise we end |
| * up getting interrupts from the sink on detecting link loss. |
| */ |
| intel_dp_set_power(intel_dp, DP_SET_POWER_D3); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) { |
| if (is_mst) { |
| enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder; |
| u32 val; |
| |
| val = intel_de_read(dev_priv, |
| TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| val &= ~(TGL_TRANS_DDI_PORT_MASK | |
| TRANS_DDI_MODE_SELECT_MASK); |
| intel_de_write(dev_priv, |
| TRANS_DDI_FUNC_CTL(cpu_transcoder), |
| val); |
| } |
| } else { |
| if (!is_mst) |
| intel_ddi_disable_pipe_clock(old_crtc_state); |
| } |
| |
| intel_disable_ddi_buf(encoder, old_crtc_state); |
| |
| /* |
| * From TGL spec: "If single stream or multi-stream master transcoder: |
| * Configure Transcoder Clock select to direct no clock to the |
| * transcoder" |
| */ |
| if (DISPLAY_VER(dev_priv) >= 12) |
| intel_ddi_disable_pipe_clock(old_crtc_state); |
| |
| intel_pps_vdd_on(intel_dp); |
| intel_pps_off(intel_dp); |
| |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) |
| intel_display_power_put(dev_priv, |
| dig_port->ddi_io_power_domain, |
| fetch_and_zero(&dig_port->ddi_io_wakeref)); |
| |
| intel_ddi_disable_clock(encoder); |
| } |
| |
| static void intel_ddi_post_disable_hdmi(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct intel_hdmi *intel_hdmi = &dig_port->hdmi; |
| |
| dig_port->set_infoframes(encoder, false, |
| old_crtc_state, old_conn_state); |
| |
| intel_ddi_disable_pipe_clock(old_crtc_state); |
| |
| intel_disable_ddi_buf(encoder, old_crtc_state); |
| |
| intel_display_power_put(dev_priv, |
| dig_port->ddi_io_power_domain, |
| fetch_and_zero(&dig_port->ddi_io_wakeref)); |
| |
| intel_ddi_disable_clock(encoder); |
| |
| intel_dp_dual_mode_set_tmds_output(intel_hdmi, false); |
| } |
| |
| static void intel_ddi_post_disable(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| enum phy phy = intel_port_to_phy(dev_priv, encoder->port); |
| bool is_tc_port = intel_phy_is_tc(dev_priv, phy); |
| |
| if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DP_MST)) { |
| intel_crtc_vblank_off(old_crtc_state); |
| |
| intel_disable_transcoder(old_crtc_state); |
| |
| intel_vrr_disable(old_crtc_state); |
| |
| intel_ddi_disable_transcoder_func(old_crtc_state); |
| |
| intel_dsc_disable(old_crtc_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) |
| skl_scaler_disable(old_crtc_state); |
| else |
| ilk_pfit_disable(old_crtc_state); |
| } |
| |
| if (old_crtc_state->bigjoiner_linked_crtc) { |
| struct intel_atomic_state *state = |
| to_intel_atomic_state(old_crtc_state->uapi.state); |
| struct intel_crtc *slave = |
| old_crtc_state->bigjoiner_linked_crtc; |
| const struct intel_crtc_state *old_slave_crtc_state = |
| intel_atomic_get_old_crtc_state(state, slave); |
| |
| intel_crtc_vblank_off(old_slave_crtc_state); |
| |
| intel_dsc_disable(old_slave_crtc_state); |
| skl_scaler_disable(old_slave_crtc_state); |
| } |
| |
| /* |
| * When called from DP MST code: |
| * - old_conn_state will be NULL |
| * - encoder will be the main encoder (ie. mst->primary) |
| * - the main connector associated with this port |
| * won't be active or linked to a crtc |
| * - old_crtc_state will be the state of the last stream to |
| * be deactivated on this port, and it may not be the same |
| * stream that was activated last, but each stream |
| * should have a state that is identical when it comes to |
| * the DP link parameteres |
| */ |
| |
| if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI)) |
| intel_ddi_post_disable_hdmi(state, encoder, old_crtc_state, |
| old_conn_state); |
| else |
| intel_ddi_post_disable_dp(state, encoder, old_crtc_state, |
| old_conn_state); |
| |
| if (intel_crtc_has_dp_encoder(old_crtc_state) || is_tc_port) |
| intel_display_power_put(dev_priv, |
| intel_ddi_main_link_aux_domain(dig_port), |
| fetch_and_zero(&dig_port->aux_wakeref)); |
| |
| if (is_tc_port) |
| intel_tc_port_put_link(dig_port); |
| } |
| |
| void intel_ddi_fdi_post_disable(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u32 val; |
| |
| /* |
| * Bspec lists this as both step 13 (before DDI_BUF_CTL disable) |
| * and step 18 (after clearing PORT_CLK_SEL). Based on a BUN, |
| * step 13 is the correct place for it. Step 18 is where it was |
| * originally before the BUN. |
| */ |
| val = intel_de_read(dev_priv, FDI_RX_CTL(PIPE_A)); |
| val &= ~FDI_RX_ENABLE; |
| intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), val); |
| |
| intel_disable_ddi_buf(encoder, old_crtc_state); |
| intel_ddi_disable_clock(encoder); |
| |
| val = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A)); |
| val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); |
| val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); |
| intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), val); |
| |
| val = intel_de_read(dev_priv, FDI_RX_CTL(PIPE_A)); |
| val &= ~FDI_PCDCLK; |
| intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), val); |
| |
| val = intel_de_read(dev_priv, FDI_RX_CTL(PIPE_A)); |
| val &= ~FDI_RX_PLL_ENABLE; |
| intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), val); |
| } |
| |
| static void trans_port_sync_stop_link_train(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| if (!crtc_state->sync_mode_slaves_mask) |
| return; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *slave_encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| struct intel_crtc *slave_crtc = to_intel_crtc(conn_state->crtc); |
| const struct intel_crtc_state *slave_crtc_state; |
| |
| if (!slave_crtc) |
| continue; |
| |
| slave_crtc_state = |
| intel_atomic_get_new_crtc_state(state, slave_crtc); |
| |
| if (slave_crtc_state->master_transcoder != |
| crtc_state->cpu_transcoder) |
| continue; |
| |
| intel_dp_stop_link_train(enc_to_intel_dp(slave_encoder), |
| slave_crtc_state); |
| } |
| |
| usleep_range(200, 400); |
| |
| intel_dp_stop_link_train(enc_to_intel_dp(encoder), |
| crtc_state); |
| } |
| |
| static void intel_enable_ddi_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| enum port port = encoder->port; |
| |
| if (port == PORT_A && DISPLAY_VER(dev_priv) < 9) |
| intel_dp_stop_link_train(intel_dp, crtc_state); |
| |
| intel_edp_backlight_on(crtc_state, conn_state); |
| |
| if (!dig_port->lspcon.active || dig_port->dp.has_hdmi_sink) |
| intel_dp_set_infoframes(encoder, true, crtc_state, conn_state); |
| |
| intel_drrs_enable(intel_dp, crtc_state); |
| |
| if (crtc_state->has_audio) |
| intel_audio_codec_enable(encoder, crtc_state, conn_state); |
| |
| trans_port_sync_stop_link_train(state, encoder, crtc_state); |
| } |
| |
| static i915_reg_t |
| gen9_chicken_trans_reg_by_port(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| static const enum transcoder trans[] = { |
| [PORT_A] = TRANSCODER_EDP, |
| [PORT_B] = TRANSCODER_A, |
| [PORT_C] = TRANSCODER_B, |
| [PORT_D] = TRANSCODER_C, |
| [PORT_E] = TRANSCODER_A, |
| }; |
| |
| drm_WARN_ON(&dev_priv->drm, DISPLAY_VER(dev_priv) < 9); |
| |
| if (drm_WARN_ON(&dev_priv->drm, port < PORT_A || port > PORT_E)) |
| port = PORT_A; |
| |
| return CHICKEN_TRANS(trans[port]); |
| } |
| |
| static void intel_enable_ddi_hdmi(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct drm_connector *connector = conn_state->connector; |
| enum port port = encoder->port; |
| |
| if (!intel_hdmi_handle_sink_scrambling(encoder, connector, |
| crtc_state->hdmi_high_tmds_clock_ratio, |
| crtc_state->hdmi_scrambling)) |
| drm_dbg_kms(&dev_priv->drm, |
| "[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n", |
| connector->base.id, connector->name); |
| |
| if (has_buf_trans_select(dev_priv)) |
| hsw_prepare_hdmi_ddi_buffers(encoder, crtc_state); |
| |
| encoder->set_signal_levels(encoder, crtc_state); |
| |
| /* Display WA #1143: skl,kbl,cfl */ |
| if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv)) { |
| /* |
| * For some reason these chicken bits have been |
| * stuffed into a transcoder register, event though |
| * the bits affect a specific DDI port rather than |
| * a specific transcoder. |
| */ |
| i915_reg_t reg = gen9_chicken_trans_reg_by_port(dev_priv, port); |
| u32 val; |
| |
| val = intel_de_read(dev_priv, reg); |
| |
| if (port == PORT_E) |
| val |= DDIE_TRAINING_OVERRIDE_ENABLE | |
| DDIE_TRAINING_OVERRIDE_VALUE; |
| else |
| val |= DDI_TRAINING_OVERRIDE_ENABLE | |
| DDI_TRAINING_OVERRIDE_VALUE; |
| |
| intel_de_write(dev_priv, reg, val); |
| intel_de_posting_read(dev_priv, reg); |
| |
| udelay(1); |
| |
| if (port == PORT_E) |
| val &= ~(DDIE_TRAINING_OVERRIDE_ENABLE | |
| DDIE_TRAINING_OVERRIDE_VALUE); |
| else |
| val &= ~(DDI_TRAINING_OVERRIDE_ENABLE | |
| DDI_TRAINING_OVERRIDE_VALUE); |
| |
| intel_de_write(dev_priv, reg, val); |
| } |
| |
| intel_ddi_power_up_lanes(encoder, crtc_state); |
| |
| /* In HDMI/DVI mode, the port width, and swing/emphasis values |
| * are ignored so nothing special needs to be done besides |
| * enabling the port. |
| * |
| * On ADL_P the PHY link rate and lane count must be programmed but |
| * these are both 0 for HDMI. |
| */ |
| intel_de_write(dev_priv, DDI_BUF_CTL(port), |
| dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE); |
| |
| if (crtc_state->has_audio) |
| intel_audio_codec_enable(encoder, crtc_state, conn_state); |
| } |
| |
| static void intel_enable_ddi(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| drm_WARN_ON(state->base.dev, crtc_state->has_pch_encoder); |
| |
| if (!crtc_state->bigjoiner_slave) |
| intel_ddi_enable_transcoder_func(encoder, crtc_state); |
| |
| intel_vrr_enable(encoder, crtc_state); |
| |
| intel_enable_transcoder(crtc_state); |
| |
| intel_crtc_vblank_on(crtc_state); |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) |
| intel_enable_ddi_hdmi(state, encoder, crtc_state, conn_state); |
| else |
| intel_enable_ddi_dp(state, encoder, crtc_state, conn_state); |
| |
| /* Enable hdcp if it's desired */ |
| if (conn_state->content_protection == |
| DRM_MODE_CONTENT_PROTECTION_DESIRED) |
| intel_hdcp_enable(to_intel_connector(conn_state->connector), |
| crtc_state, |
| (u8)conn_state->hdcp_content_type); |
| } |
| |
| static void intel_disable_ddi_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| intel_dp->link_trained = false; |
| |
| intel_edp_backlight_off(old_conn_state); |
| /* Disable the decompression in DP Sink */ |
| intel_dp_sink_set_decompression_state(intel_dp, old_crtc_state, |
| false); |
| /* Disable Ignore_MSA bit in DP Sink */ |
| intel_dp_sink_set_msa_timing_par_ignore_state(intel_dp, old_crtc_state, |
| false); |
| } |
| |
| static void intel_disable_ddi_hdmi(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct drm_connector *connector = old_conn_state->connector; |
| |
| if (!intel_hdmi_handle_sink_scrambling(encoder, connector, |
| false, false)) |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n", |
| connector->base.id, connector->name); |
| } |
| |
| static void intel_pre_disable_ddi(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct intel_dp *intel_dp; |
| |
| if (old_crtc_state->has_audio) |
| intel_audio_codec_disable(encoder, old_crtc_state, |
| old_conn_state); |
| |
| if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI)) |
| return; |
| |
| intel_dp = enc_to_intel_dp(encoder); |
| intel_drrs_disable(intel_dp, old_crtc_state); |
| intel_psr_disable(intel_dp, old_crtc_state); |
| } |
| |
| static void intel_disable_ddi(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| intel_hdcp_disable(to_intel_connector(old_conn_state->connector)); |
| |
| if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI)) |
| intel_disable_ddi_hdmi(state, encoder, old_crtc_state, |
| old_conn_state); |
| else |
| intel_disable_ddi_dp(state, encoder, old_crtc_state, |
| old_conn_state); |
| } |
| |
| static void intel_ddi_update_pipe_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| intel_ddi_set_dp_msa(crtc_state, conn_state); |
| |
| intel_dp_set_infoframes(encoder, true, crtc_state, conn_state); |
| intel_drrs_update(intel_dp, crtc_state); |
| |
| intel_backlight_update(state, encoder, crtc_state, conn_state); |
| } |
| |
| void intel_ddi_update_pipe(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| |
| if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) && |
| !intel_encoder_is_mst(encoder)) |
| intel_ddi_update_pipe_dp(state, encoder, crtc_state, |
| conn_state); |
| |
| intel_hdcp_update_pipe(state, encoder, crtc_state, conn_state); |
| } |
| |
| static void |
| intel_ddi_update_prepare(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| struct intel_crtc *crtc) |
| { |
| struct intel_crtc_state *crtc_state = |
| crtc ? intel_atomic_get_new_crtc_state(state, crtc) : NULL; |
| int required_lanes = crtc_state ? crtc_state->lane_count : 1; |
| |
| drm_WARN_ON(state->base.dev, crtc && crtc->active); |
| |
| intel_tc_port_get_link(enc_to_dig_port(encoder), |
| required_lanes); |
| if (crtc_state && crtc_state->hw.active) |
| intel_update_active_dpll(state, crtc, encoder); |
| } |
| |
| static void |
| intel_ddi_update_complete(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| struct intel_crtc *crtc) |
| { |
| intel_tc_port_put_link(enc_to_dig_port(encoder)); |
| } |
| |
| static void |
| intel_ddi_pre_pll_enable(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| enum phy phy = intel_port_to_phy(dev_priv, encoder->port); |
| bool is_tc_port = intel_phy_is_tc(dev_priv, phy); |
| |
| if (is_tc_port) |
| intel_tc_port_get_link(dig_port, crtc_state->lane_count); |
| |
| if (intel_crtc_has_dp_encoder(crtc_state) || is_tc_port) { |
| drm_WARN_ON(&dev_priv->drm, dig_port->aux_wakeref); |
| dig_port->aux_wakeref = |
| intel_display_power_get(dev_priv, |
| intel_ddi_main_link_aux_domain(dig_port)); |
| } |
| |
| if (is_tc_port && !intel_tc_port_in_tbt_alt_mode(dig_port)) |
| /* |
| * Program the lane count for static/dynamic connections on |
| * Type-C ports. Skip this step for TBT. |
| */ |
| intel_tc_port_set_fia_lane_count(dig_port, crtc_state->lane_count); |
| else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) |
| bxt_ddi_phy_set_lane_optim_mask(encoder, |
| crtc_state->lane_lat_optim_mask); |
| } |
| |
| static void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| u32 dp_tp_ctl, ddi_buf_ctl; |
| bool wait = false; |
| |
| dp_tp_ctl = intel_de_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state)); |
| |
| if (dp_tp_ctl & DP_TP_CTL_ENABLE) { |
| ddi_buf_ctl = intel_de_read(dev_priv, DDI_BUF_CTL(port)); |
| if (ddi_buf_ctl & DDI_BUF_CTL_ENABLE) { |
| intel_de_write(dev_priv, DDI_BUF_CTL(port), |
| ddi_buf_ctl & ~DDI_BUF_CTL_ENABLE); |
| wait = true; |
| } |
| |
| dp_tp_ctl &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); |
| dp_tp_ctl |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| intel_de_write(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), dp_tp_ctl); |
| intel_de_posting_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state)); |
| |
| if (wait) |
| intel_wait_ddi_buf_idle(dev_priv, port); |
| } |
| |
| dp_tp_ctl = DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT1; |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) { |
| dp_tp_ctl |= DP_TP_CTL_MODE_MST; |
| } else { |
| dp_tp_ctl |= DP_TP_CTL_MODE_SST; |
| if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
| dp_tp_ctl |= DP_TP_CTL_ENHANCED_FRAME_ENABLE; |
| } |
| intel_de_write(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), dp_tp_ctl); |
| intel_de_posting_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state)); |
| |
| intel_dp->DP |= DDI_BUF_CTL_ENABLE; |
| intel_de_write(dev_priv, DDI_BUF_CTL(port), intel_dp->DP); |
| intel_de_posting_read(dev_priv, DDI_BUF_CTL(port)); |
| |
| intel_wait_ddi_buf_active(dev_priv, port); |
| } |
| |
| static void intel_ddi_set_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| u8 dp_train_pat) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u32 temp; |
| |
| temp = intel_de_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state)); |
| |
| temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; |
| switch (intel_dp_training_pattern_symbol(dp_train_pat)) { |
| case DP_TRAINING_PATTERN_DISABLE: |
| temp |= DP_TP_CTL_LINK_TRAIN_NORMAL; |
| break; |
| case DP_TRAINING_PATTERN_1: |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| break; |
| case DP_TRAINING_PATTERN_2: |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT2; |
| break; |
| case DP_TRAINING_PATTERN_3: |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT3; |
| break; |
| case DP_TRAINING_PATTERN_4: |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT4; |
| break; |
| } |
| |
| intel_de_write(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), temp); |
| } |
| |
| static void intel_ddi_set_idle_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| u32 val; |
| |
| val = intel_de_read(dev_priv, dp_tp_ctl_reg(encoder, crtc_state)); |
| val &= ~DP_TP_CTL_LINK_TRAIN_MASK; |
| val |= DP_TP_CTL_LINK_TRAIN_IDLE; |
| intel_de_write(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), val); |
| |
| /* |
| * Until TGL on PORT_A we can have only eDP in SST mode. There the only |
| * reason we need to set idle transmission mode is to work around a HW |
| * issue where we enable the pipe while not in idle link-training mode. |
| * In this case there is requirement to wait for a minimum number of |
| * idle patterns to be sent. |
| */ |
| if (port == PORT_A && DISPLAY_VER(dev_priv) < 12) |
| return; |
| |
| if (intel_de_wait_for_set(dev_priv, |
| dp_tp_status_reg(encoder, crtc_state), |
| DP_TP_STATUS_IDLE_DONE, 1)) |
| drm_err(&dev_priv->drm, |
| "Timed out waiting for DP idle patterns\n"); |
| } |
| |
| static bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder) |
| { |
| if (cpu_transcoder == TRANSCODER_EDP) |
| return false; |
| |
| if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO_MMIO)) |
| return false; |
| |
| return intel_de_read(dev_priv, HSW_AUD_PIN_ELD_CP_VLD) & |
| AUDIO_OUTPUT_ENABLE(cpu_transcoder); |
| } |
| |
| void intel_ddi_compute_min_voltage_level(struct drm_i915_private *dev_priv, |
| struct intel_crtc_state *crtc_state) |
| { |
| if (DISPLAY_VER(dev_priv) >= 12 && crtc_state->port_clock > 594000) |
| crtc_state->min_voltage_level = 2; |
| else if (IS_JSL_EHL(dev_priv) && crtc_state->port_clock > 594000) |
| crtc_state->min_voltage_level = 3; |
| else if (DISPLAY_VER(dev_priv) >= 11 && crtc_state->port_clock > 594000) |
| crtc_state->min_voltage_level = 1; |
| } |
| |
| static enum transcoder bdw_transcoder_master_readout(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder) |
| { |
| u32 master_select; |
| |
| if (DISPLAY_VER(dev_priv) >= 11) { |
| u32 ctl2 = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL2(cpu_transcoder)); |
| |
| if ((ctl2 & PORT_SYNC_MODE_ENABLE) == 0) |
| return INVALID_TRANSCODER; |
| |
| master_select = REG_FIELD_GET(PORT_SYNC_MODE_MASTER_SELECT_MASK, ctl2); |
| } else { |
| u32 ctl = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| |
| if ((ctl & TRANS_DDI_PORT_SYNC_ENABLE) == 0) |
| return INVALID_TRANSCODER; |
| |
| master_select = REG_FIELD_GET(TRANS_DDI_PORT_SYNC_MASTER_SELECT_MASK, ctl); |
| } |
| |
| if (master_select == 0) |
| return TRANSCODER_EDP; |
| else |
| return master_select - 1; |
| } |
| |
| static void bdw_get_trans_port_sync_config(struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| u32 transcoders = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | |
| BIT(TRANSCODER_C) | BIT(TRANSCODER_D); |
| enum transcoder cpu_transcoder; |
| |
| crtc_state->master_transcoder = |
| bdw_transcoder_master_readout(dev_priv, crtc_state->cpu_transcoder); |
| |
| for_each_cpu_transcoder_masked(dev_priv, cpu_transcoder, transcoders) { |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t trans_wakeref; |
| |
| power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder); |
| trans_wakeref = intel_display_power_get_if_enabled(dev_priv, |
| power_domain); |
| |
| if (!trans_wakeref) |
| continue; |
| |
| if (bdw_transcoder_master_readout(dev_priv, cpu_transcoder) == |
| crtc_state->cpu_transcoder) |
| crtc_state->sync_mode_slaves_mask |= BIT(cpu_transcoder); |
| |
| intel_display_power_put(dev_priv, power_domain, trans_wakeref); |
| } |
| |
| drm_WARN_ON(&dev_priv->drm, |
| crtc_state->master_transcoder != INVALID_TRANSCODER && |
| crtc_state->sync_mode_slaves_mask); |
| } |
| |
| static void intel_ddi_read_func_ctl(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| u32 temp, flags = 0; |
| |
| temp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| if (temp & TRANS_DDI_PHSYNC) |
| flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NHSYNC; |
| if (temp & TRANS_DDI_PVSYNC) |
| flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| pipe_config->hw.adjusted_mode.flags |= flags; |
| |
| switch (temp & TRANS_DDI_BPC_MASK) { |
| case TRANS_DDI_BPC_6: |
| pipe_config->pipe_bpp = 18; |
| break; |
| case TRANS_DDI_BPC_8: |
| pipe_config->pipe_bpp = 24; |
| break; |
| case TRANS_DDI_BPC_10: |
| pipe_config->pipe_bpp = 30; |
| break; |
| case TRANS_DDI_BPC_12: |
| pipe_config->pipe_bpp = 36; |
| break; |
| default: |
| break; |
| } |
| |
| switch (temp & TRANS_DDI_MODE_SELECT_MASK) { |
| case TRANS_DDI_MODE_SELECT_HDMI: |
| pipe_config->has_hdmi_sink = true; |
| |
| pipe_config->infoframes.enable |= |
| intel_hdmi_infoframes_enabled(encoder, pipe_config); |
| |
| if (pipe_config->infoframes.enable) |
| pipe_config->has_infoframe = true; |
| |
| if (temp & TRANS_DDI_HDMI_SCRAMBLING) |
| pipe_config->hdmi_scrambling = true; |
| if (temp & TRANS_DDI_HIGH_TMDS_CHAR_RATE) |
| pipe_config->hdmi_high_tmds_clock_ratio = true; |
| fallthrough; |
| case TRANS_DDI_MODE_SELECT_DVI: |
| pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI); |
| pipe_config->lane_count = 4; |
| break; |
| case TRANS_DDI_MODE_SELECT_DP_SST: |
| if (encoder->type == INTEL_OUTPUT_EDP) |
| pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP); |
| else |
| pipe_config->output_types |= BIT(INTEL_OUTPUT_DP); |
| pipe_config->lane_count = |
| ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; |
| intel_dp_get_m_n(crtc, pipe_config); |
| |
| if (DISPLAY_VER(dev_priv) >= 11) { |
| i915_reg_t dp_tp_ctl = dp_tp_ctl_reg(encoder, pipe_config); |
| |
| pipe_config->fec_enable = |
| intel_de_read(dev_priv, dp_tp_ctl) & DP_TP_CTL_FEC_ENABLE; |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "[ENCODER:%d:%s] Fec status: %u\n", |
| encoder->base.base.id, encoder->base.name, |
| pipe_config->fec_enable); |
| } |
| |
| if (dig_port->lspcon.active && dig_port->dp.has_hdmi_sink) |
| pipe_config->infoframes.enable |= |
| intel_lspcon_infoframes_enabled(encoder, pipe_config); |
| else |
| pipe_config->infoframes.enable |= |
| intel_hdmi_infoframes_enabled(encoder, pipe_config); |
| break; |
| case TRANS_DDI_MODE_SELECT_FDI_OR_128B132B: |
| if (!HAS_DP20(dev_priv)) { |
| /* FDI */ |
| pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG); |
| break; |
| } |
| fallthrough; /* 128b/132b */ |
| case TRANS_DDI_MODE_SELECT_DP_MST: |
| pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST); |
| pipe_config->lane_count = |
| ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| pipe_config->mst_master_transcoder = |
| REG_FIELD_GET(TRANS_DDI_MST_TRANSPORT_SELECT_MASK, temp); |
| |
| intel_dp_get_m_n(crtc, pipe_config); |
| |
| pipe_config->infoframes.enable |= |
| intel_hdmi_infoframes_enabled(encoder, pipe_config); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void intel_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; |
| |
| /* XXX: DSI transcoder paranoia */ |
| if (drm_WARN_ON(&dev_priv->drm, transcoder_is_dsi(cpu_transcoder))) |
| return; |
| |
| if (pipe_config->bigjoiner_slave) { |
| /* read out pipe settings from master */ |
| enum transcoder save = pipe_config->cpu_transcoder; |
| |
| /* Our own transcoder needs to be disabled when reading it in intel_ddi_read_func_ctl() */ |
| WARN_ON(pipe_config->output_types); |
| pipe_config->cpu_transcoder = (enum transcoder)pipe_config->bigjoiner_linked_crtc->pipe; |
| intel_ddi_read_func_ctl(encoder, pipe_config); |
| pipe_config->cpu_transcoder = save; |
| } else { |
| intel_ddi_read_func_ctl(encoder, pipe_config); |
| } |
| |
| intel_ddi_mso_get_config(encoder, pipe_config); |
| |
| pipe_config->has_audio = |
| intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder); |
| |
| if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp && |
| pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) { |
| /* |
| * This is a big fat ugly hack. |
| * |
| * Some machines in UEFI boot mode provide us a VBT that has 18 |
| * bpp and 1.62 GHz link bandwidth for eDP, which for reasons |
| * unknown we fail to light up. Yet the same BIOS boots up with |
| * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as |
| * max, not what it tells us to use. |
| * |
| * Note: This will still be broken if the eDP panel is not lit |
| * up by the BIOS, and thus we can't get the mode at module |
| * load. |
| */ |
| drm_dbg_kms(&dev_priv->drm, |
| "pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", |
| pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp); |
| dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; |
| } |
| |
| if (!pipe_config->bigjoiner_slave) |
| ddi_dotclock_get(pipe_config); |
| |
| if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) |
| pipe_config->lane_lat_optim_mask = |
| bxt_ddi_phy_get_lane_lat_optim_mask(encoder); |
| |
| intel_ddi_compute_min_voltage_level(dev_priv, pipe_config); |
| |
| intel_hdmi_read_gcp_infoframe(encoder, pipe_config); |
| |
| intel_read_infoframe(encoder, pipe_config, |
| HDMI_INFOFRAME_TYPE_AVI, |
| &pipe_config->infoframes.avi); |
| intel_read_infoframe(encoder, pipe_config, |
| HDMI_INFOFRAME_TYPE_SPD, |
| &pipe_config->infoframes.spd); |
| intel_read_infoframe(encoder, pipe_config, |
| HDMI_INFOFRAME_TYPE_VENDOR, |
| &pipe_config->infoframes.hdmi); |
| intel_read_infoframe(encoder, pipe_config, |
| HDMI_INFOFRAME_TYPE_DRM, |
| &pipe_config->infoframes.drm); |
| |
| if (DISPLAY_VER(dev_priv) >= 8) |
| bdw_get_trans_port_sync_config(pipe_config); |
| |
| intel_read_dp_sdp(encoder, pipe_config, HDMI_PACKET_TYPE_GAMUT_METADATA); |
| intel_read_dp_sdp(encoder, pipe_config, DP_SDP_VSC); |
| |
| intel_psr_get_config(encoder, pipe_config); |
| } |
| |
| void intel_ddi_get_clock(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct intel_shared_dpll *pll) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum icl_port_dpll_id port_dpll_id = ICL_PORT_DPLL_DEFAULT; |
| struct icl_port_dpll *port_dpll = &crtc_state->icl_port_dplls[port_dpll_id]; |
| bool pll_active; |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| port_dpll->pll = pll; |
| pll_active = intel_dpll_get_hw_state(i915, pll, &port_dpll->hw_state); |
| drm_WARN_ON(&i915->drm, !pll_active); |
| |
| icl_set_active_port_dpll(crtc_state, port_dpll_id); |
| |
| crtc_state->port_clock = intel_dpll_get_freq(i915, crtc_state->shared_dpll, |
| &crtc_state->dpll_hw_state); |
| } |
| |
| static void dg2_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| intel_mpllb_readout_hw_state(encoder, &crtc_state->mpllb_state); |
| crtc_state->port_clock = intel_mpllb_calc_port_clock(encoder, &crtc_state->mpllb_state); |
| |
| intel_ddi_get_config(encoder, crtc_state); |
| } |
| |
| static void adls_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| intel_ddi_get_clock(encoder, crtc_state, adls_ddi_get_pll(encoder)); |
| intel_ddi_get_config(encoder, crtc_state); |
| } |
| |
| static void rkl_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| intel_ddi_get_clock(encoder, crtc_state, rkl_ddi_get_pll(encoder)); |
| intel_ddi_get_config(encoder, crtc_state); |
| } |
| |
| static void dg1_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| intel_ddi_get_clock(encoder, crtc_state, dg1_ddi_get_pll(encoder)); |
| intel_ddi_get_config(encoder, crtc_state); |
| } |
| |
| static void icl_ddi_combo_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| intel_ddi_get_clock(encoder, crtc_state, icl_ddi_combo_get_pll(encoder)); |
| intel_ddi_get_config(encoder, crtc_state); |
| } |
| |
| static void icl_ddi_tc_get_clock(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct intel_shared_dpll *pll) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum icl_port_dpll_id port_dpll_id; |
| struct icl_port_dpll *port_dpll; |
| bool pll_active; |
| |
| if (drm_WARN_ON(&i915->drm, !pll)) |
| return; |
| |
| if (intel_get_shared_dpll_id(i915, pll) == DPLL_ID_ICL_TBTPLL) |
| port_dpll_id = ICL_PORT_DPLL_DEFAULT; |
| else |
| port_dpll_id = ICL_PORT_DPLL_MG_PHY; |
| |
| port_dpll = &crtc_state->icl_port_dplls[port_dpll_id]; |
| |
| port_dpll->pll = pll; |
| pll_active = intel_dpll_get_hw_state(i915, pll, &port_dpll->hw_state); |
| drm_WARN_ON(&i915->drm, !pll_active); |
| |
| icl_set_active_port_dpll(crtc_state, port_dpll_id); |
| |
| if (intel_get_shared_dpll_id(i915, crtc_state->shared_dpll) == DPLL_ID_ICL_TBTPLL) |
| crtc_state->port_clock = icl_calc_tbt_pll_link(i915, encoder->port); |
| else |
| crtc_state->port_clock = intel_dpll_get_freq(i915, crtc_state->shared_dpll, |
| &crtc_state->dpll_hw_state); |
| } |
| |
| static void icl_ddi_tc_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| icl_ddi_tc_get_clock(encoder, crtc_state, icl_ddi_tc_get_pll(encoder)); |
| intel_ddi_get_config(encoder, crtc_state); |
| } |
| |
| static void bxt_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| intel_ddi_get_clock(encoder, crtc_state, bxt_ddi_get_pll(encoder)); |
| intel_ddi_get_config(encoder, crtc_state); |
| } |
| |
| static void skl_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| intel_ddi_get_clock(encoder, crtc_state, skl_ddi_get_pll(encoder)); |
| intel_ddi_get_config(encoder, crtc_state); |
| } |
| |
| void hsw_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| intel_ddi_get_clock(encoder, crtc_state, hsw_ddi_get_pll(encoder)); |
| intel_ddi_get_config(encoder, crtc_state); |
| } |
| |
| static void intel_ddi_sync_state(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| if (intel_phy_is_tc(i915, phy)) |
| intel_tc_port_sanitize(enc_to_dig_port(encoder)); |
| |
| if (crtc_state && intel_crtc_has_dp_encoder(crtc_state)) |
| intel_dp_sync_state(encoder, crtc_state); |
| } |
| |
| static bool intel_ddi_initial_fastset_check(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| if (intel_crtc_has_dp_encoder(crtc_state)) |
| return intel_dp_initial_fastset_check(encoder, crtc_state); |
| |
| return true; |
| } |
| |
| static enum intel_output_type |
| intel_ddi_compute_output_type(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| switch (conn_state->connector->connector_type) { |
| case DRM_MODE_CONNECTOR_HDMIA: |
| return INTEL_OUTPUT_HDMI; |
| case DRM_MODE_CONNECTOR_eDP: |
| return INTEL_OUTPUT_EDP; |
| case DRM_MODE_CONNECTOR_DisplayPort: |
| return INTEL_OUTPUT_DP; |
| default: |
| MISSING_CASE(conn_state->connector->connector_type); |
| return INTEL_OUTPUT_UNUSED; |
| } |
| } |
| |
| static int intel_ddi_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| int ret; |
| |
| if (HAS_TRANSCODER(dev_priv, TRANSCODER_EDP) && port == PORT_A) |
| pipe_config->cpu_transcoder = TRANSCODER_EDP; |
| |
| if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI)) { |
| ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state); |
| } else { |
| ret = intel_dp_compute_config(encoder, pipe_config, conn_state); |
| } |
| |
| if (ret) |
| return ret; |
| |
| if (IS_HASWELL(dev_priv) && crtc->pipe == PIPE_A && |
| pipe_config->cpu_transcoder == TRANSCODER_EDP) |
| pipe_config->pch_pfit.force_thru = |
| pipe_config->pch_pfit.enabled || |
| pipe_config->crc_enabled; |
| |
| if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) |
| pipe_config->lane_lat_optim_mask = |
| bxt_ddi_phy_calc_lane_lat_optim_mask(pipe_config->lane_count); |
| |
| intel_ddi_compute_min_voltage_level(dev_priv, pipe_config); |
| |
| return 0; |
| } |
| |
| static bool mode_equal(const struct drm_display_mode *mode1, |
| const struct drm_display_mode *mode2) |
| { |
| return drm_mode_match(mode1, mode2, |
| DRM_MODE_MATCH_TIMINGS | |
| DRM_MODE_MATCH_FLAGS | |
| DRM_MODE_MATCH_3D_FLAGS) && |
| mode1->clock == mode2->clock; /* we want an exact match */ |
| } |
| |
| static bool m_n_equal(const struct intel_link_m_n *m_n_1, |
| const struct intel_link_m_n *m_n_2) |
| { |
| return m_n_1->tu == m_n_2->tu && |
| m_n_1->gmch_m == m_n_2->gmch_m && |
| m_n_1->gmch_n == m_n_2->gmch_n && |
| m_n_1->link_m == m_n_2->link_m && |
| m_n_1->link_n == m_n_2->link_n; |
| } |
| |
| static bool crtcs_port_sync_compatible(const struct intel_crtc_state *crtc_state1, |
| const struct intel_crtc_state *crtc_state2) |
| { |
| return crtc_state1->hw.active && crtc_state2->hw.active && |
| crtc_state1->output_types == crtc_state2->output_types && |
| crtc_state1->output_format == crtc_state2->output_format && |
| crtc_state1->lane_count == crtc_state2->lane_count && |
| crtc_state1->port_clock == crtc_state2->port_clock && |
| mode_equal(&crtc_state1->hw.adjusted_mode, |
| &crtc_state2->hw.adjusted_mode) && |
| m_n_equal(&crtc_state1->dp_m_n, &crtc_state2->dp_m_n); |
| } |
| |
| static u8 |
| intel_ddi_port_sync_transcoders(const struct intel_crtc_state *ref_crtc_state, |
| int tile_group_id) |
| { |
| struct drm_connector *connector; |
| const struct drm_connector_state *conn_state; |
| struct drm_i915_private *dev_priv = to_i915(ref_crtc_state->uapi.crtc->dev); |
| struct intel_atomic_state *state = |
| to_intel_atomic_state(ref_crtc_state->uapi.state); |
| u8 transcoders = 0; |
| int i; |
| |
| /* |
| * We don't enable port sync on BDW due to missing w/as and |
| * due to not having adjusted the modeset sequence appropriately. |
| */ |
| if (DISPLAY_VER(dev_priv) < 9) |
| return 0; |
| |
| if (!intel_crtc_has_type(ref_crtc_state, INTEL_OUTPUT_DP)) |
| return 0; |
| |
| for_each_new_connector_in_state(&state->base, connector, conn_state, i) { |
| struct intel_crtc *crtc = to_intel_crtc(conn_state->crtc); |
| const struct intel_crtc_state *crtc_state; |
| |
| if (!crtc) |
| continue; |
| |
| if (!connector->has_tile || |
| connector->tile_group->id != |
| tile_group_id) |
| continue; |
| crtc_state = intel_atomic_get_new_crtc_state(state, |
| crtc); |
| if (!crtcs_port_sync_compatible(ref_crtc_state, |
| crtc_state)) |
| continue; |
| transcoders |= BIT(crtc_state->cpu_transcoder); |
| } |
| |
| return transcoders; |
| } |
| |
| static int intel_ddi_compute_config_late(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct drm_connector *connector = conn_state->connector; |
| u8 port_sync_transcoders = 0; |
| |
| drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] [CRTC:%d:%s]", |
| encoder->base.base.id, encoder->base.name, |
| crtc_state->uapi.crtc->base.id, crtc_state->uapi.crtc->name); |
| |
| if (connector->has_tile) |
| port_sync_transcoders = intel_ddi_port_sync_transcoders(crtc_state, |
| connector->tile_group->id); |
| |
| /* |
| * EDP Transcoders cannot be ensalved |
| * make them a master always when present |
| */ |
| if (port_sync_transcoders & BIT(TRANSCODER_EDP)) |
| crtc_state->master_transcoder = TRANSCODER_EDP; |
| else |
| crtc_state->master_transcoder = ffs(port_sync_transcoders) - 1; |
| |
| if (crtc_state->master_transcoder == crtc_state->cpu_transcoder) { |
| crtc_state->master_transcoder = INVALID_TRANSCODER; |
| crtc_state->sync_mode_slaves_mask = |
| port_sync_transcoders & ~BIT(crtc_state->cpu_transcoder); |
| } |
| |
| return 0; |
| } |
| |
| static void intel_ddi_encoder_destroy(struct drm_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(to_intel_encoder(encoder)); |
| enum phy phy = intel_port_to_phy(i915, dig_port->base.port); |
| |
| intel_dp_encoder_flush_work(encoder); |
| if (intel_phy_is_tc(i915, phy)) |
| intel_tc_port_flush_work(dig_port); |
| intel_display_power_flush_work(i915); |
| |
| drm_encoder_cleanup(encoder); |
| kfree(dig_port->hdcp_port_data.streams); |
| kfree(dig_port); |
| } |
| |
| static void intel_ddi_encoder_reset(struct drm_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(encoder)); |
| |
| intel_dp->reset_link_params = true; |
| |
| intel_pps_encoder_reset(intel_dp); |
| } |
| |
| static const struct drm_encoder_funcs intel_ddi_funcs = { |
| .reset = intel_ddi_encoder_reset, |
| .destroy = intel_ddi_encoder_destroy, |
| }; |
| |
| static struct intel_connector * |
| intel_ddi_init_dp_connector(struct intel_digital_port *dig_port) |
| { |
| struct intel_connector *connector; |
| enum port port = dig_port->base.port; |
| |
| connector = intel_connector_alloc(); |
| if (!connector) |
| return NULL; |
| |
| dig_port->dp.output_reg = DDI_BUF_CTL(port); |
| dig_port->dp.prepare_link_retrain = intel_ddi_prepare_link_retrain; |
| dig_port->dp.set_link_train = intel_ddi_set_link_train; |
| dig_port->dp.set_idle_link_train = intel_ddi_set_idle_link_train; |
| |
| dig_port->dp.voltage_max = intel_ddi_dp_voltage_max; |
| dig_port->dp.preemph_max = intel_ddi_dp_preemph_max; |
| |
| if (!intel_dp_init_connector(dig_port, connector)) { |
| kfree(connector); |
| return NULL; |
| } |
| |
| return connector; |
| } |
| |
| static int modeset_pipe(struct drm_crtc *crtc, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_atomic_state *state; |
| struct drm_crtc_state *crtc_state; |
| int ret; |
| |
| state = drm_atomic_state_alloc(crtc->dev); |
| if (!state) |
| return -ENOMEM; |
| |
| state->acquire_ctx = ctx; |
| |
| crtc_state = drm_atomic_get_crtc_state(state, crtc); |
| if (IS_ERR(crtc_state)) { |
| ret = PTR_ERR(crtc_state); |
| goto out; |
| } |
| |
| crtc_state->connectors_changed = true; |
| |
| ret = drm_atomic_commit(state); |
| out: |
| drm_atomic_state_put(state); |
| |
| return ret; |
| } |
| |
| static int intel_hdmi_reset_link(struct intel_encoder *encoder, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_hdmi *hdmi = enc_to_intel_hdmi(encoder); |
| struct intel_connector *connector = hdmi->attached_connector; |
| struct i2c_adapter *adapter = |
| intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus); |
| struct drm_connector_state *conn_state; |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| u8 config; |
| int ret; |
| |
| if (!connector || connector->base.status != connector_status_connected) |
| return 0; |
| |
| ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex, |
| ctx); |
| if (ret) |
| return ret; |
| |
| conn_state = connector->base.state; |
| |
| crtc = to_intel_crtc(conn_state->crtc); |
| if (!crtc) |
| return 0; |
| |
| ret = drm_modeset_lock(&crtc->base.mutex, ctx); |
| if (ret) |
| return ret; |
| |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| |
| drm_WARN_ON(&dev_priv->drm, |
| !intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)); |
| |
| if (!crtc_state->hw.active) |
| return 0; |
| |
| if (!crtc_state->hdmi_high_tmds_clock_ratio && |
| !crtc_state->hdmi_scrambling) |
| return 0; |
| |
| if (conn_state->commit && |
| !try_wait_for_completion(&conn_state->commit->hw_done)) |
| return 0; |
| |
| ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); |
| if (ret < 0) { |
| drm_err(&dev_priv->drm, "Failed to read TMDS config: %d\n", |
| ret); |
| return 0; |
| } |
| |
| if (!!(config & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40) == |
| crtc_state->hdmi_high_tmds_clock_ratio && |
| !!(config & SCDC_SCRAMBLING_ENABLE) == |
| crtc_state->hdmi_scrambling) |
| return 0; |
| |
| /* |
| * HDMI 2.0 says that one should not send scrambled data |
| * prior to configuring the sink scrambling, and that |
| * TMDS clock/data transmission should be suspended when |
| * changing the TMDS clock rate in the sink. So let's |
| * just do a full modeset here, even though some sinks |
| * would be perfectly happy if were to just reconfigure |
| * the SCDC settings on the fly. |
| */ |
| return modeset_pipe(&crtc->base, ctx); |
| } |
| |
| static enum intel_hotplug_state |
| intel_ddi_hotplug(struct intel_encoder *encoder, |
| struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct intel_dp *intel_dp = &dig_port->dp; |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| bool is_tc = intel_phy_is_tc(i915, phy); |
| struct drm_modeset_acquire_ctx ctx; |
| enum intel_hotplug_state state; |
| int ret; |
| |
| if (intel_dp->compliance.test_active && |
| intel_dp->compliance.test_type == DP_TEST_LINK_PHY_TEST_PATTERN) { |
| intel_dp_phy_test(encoder); |
| /* just do the PHY test and nothing else */ |
| return INTEL_HOTPLUG_UNCHANGED; |
| } |
| |
| state = intel_encoder_hotplug(encoder, connector); |
| |
| drm_modeset_acquire_init(&ctx, 0); |
| |
| for (;;) { |
| if (connector->base.connector_type == DRM_MODE_CONNECTOR_HDMIA) |
| ret = intel_hdmi_reset_link(encoder, &ctx); |
| else |
| ret = intel_dp_retrain_link(encoder, &ctx); |
| |
| if (ret == -EDEADLK) { |
| drm_modeset_backoff(&ctx); |
| continue; |
| } |
| |
| break; |
| } |
| |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| drm_WARN(encoder->base.dev, ret, |
| "Acquiring modeset locks failed with %i\n", ret); |
| |
| /* |
| * Unpowered type-c dongles can take some time to boot and be |
| * responsible, so here giving some time to those dongles to power up |
| * and then retrying the probe. |
| * |
| * On many platforms the HDMI live state signal is known to be |
| * unreliable, so we can't use it to detect if a sink is connected or |
| * not. Instead we detect if it's connected based on whether we can |
| * read the EDID or not. That in turn has a problem during disconnect, |
| * since the HPD interrupt may be raised before the DDC lines get |
| * disconnected (due to how the required length of DDC vs. HPD |
| * connector pins are specified) and so we'll still be able to get a |
| * valid EDID. To solve this schedule another detection cycle if this |
| * time around we didn't detect any change in the sink's connection |
| * status. |
| * |
| * Type-c connectors which get their HPD signal deasserted then |
| * reasserted, without unplugging/replugging the sink from the |
| * connector, introduce a delay until the AUX channel communication |
| * becomes functional. Retry the detection for 5 seconds on type-c |
| * connectors to account for this delay. |
| */ |
| if (state == INTEL_HOTPLUG_UNCHANGED && |
| connector->hotplug_retries < (is_tc ? 5 : 1) && |
| !dig_port->dp.is_mst) |
| state = INTEL_HOTPLUG_RETRY; |
| |
| return state; |
| } |
| |
| static bool lpt_digital_port_connected(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u32 bit = dev_priv->hotplug.pch_hpd[encoder->hpd_pin]; |
| |
| return intel_de_read(dev_priv, SDEISR) & bit; |
| } |
| |
| static bool hsw_digital_port_connected(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u32 bit = dev_priv->hotplug.hpd[encoder->hpd_pin]; |
| |
| return intel_de_read(dev_priv, DEISR) & bit; |
| } |
| |
| static bool bdw_digital_port_connected(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u32 bit = dev_priv->hotplug.hpd[encoder->hpd_pin]; |
| |
| return intel_de_read(dev_priv, GEN8_DE_PORT_ISR) & bit; |
| } |
| |
| static struct intel_connector * |
| intel_ddi_init_hdmi_connector(struct intel_digital_port *dig_port) |
| { |
| struct intel_connector *connector; |
| enum port port = dig_port->base.port; |
| |
| connector = intel_connector_alloc(); |
| if (!connector) |
| return NULL; |
| |
| dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); |
| intel_hdmi_init_connector(dig_port, connector); |
| |
| return connector; |
| } |
| |
| static bool intel_ddi_a_force_4_lanes(struct intel_digital_port *dig_port) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); |
| |
| if (dig_port->base.port != PORT_A) |
| return false; |
| |
| if (dig_port->saved_port_bits & DDI_A_4_LANES) |
| return false; |
| |
| /* Broxton/Geminilake: Bspec says that DDI_A_4_LANES is the only |
| * supported configuration |
| */ |
| if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) |
| return true; |
| |
| return false; |
| } |
| |
| static int |
| intel_ddi_max_lanes(struct intel_digital_port *dig_port) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); |
| enum port port = dig_port->base.port; |
| int max_lanes = 4; |
| |
| if (DISPLAY_VER(dev_priv) >= 11) |
| return max_lanes; |
| |
| if (port == PORT_A || port == PORT_E) { |
| if (intel_de_read(dev_priv, DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) |
| max_lanes = port == PORT_A ? 4 : 0; |
| else |
| /* Both A and E share 2 lanes */ |
| max_lanes = 2; |
| } |
| |
| /* |
| * Some BIOS might fail to set this bit on port A if eDP |
| * wasn't lit up at boot. Force this bit set when needed |
| * so we use the proper lane count for our calculations. |
| */ |
| if (intel_ddi_a_force_4_lanes(dig_port)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Forcing DDI_A_4_LANES for port A\n"); |
| dig_port->saved_port_bits |= DDI_A_4_LANES; |
| max_lanes = 4; |
| } |
| |
| return max_lanes; |
| } |
| |
| static bool hti_uses_phy(struct drm_i915_private *i915, enum phy phy) |
| { |
| return i915->hti_state & HDPORT_ENABLED && |
| i915->hti_state & HDPORT_DDI_USED(phy); |
| } |
| |
| static enum hpd_pin xelpd_hpd_pin(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| if (port >= PORT_D_XELPD) |
| return HPD_PORT_D + port - PORT_D_XELPD; |
| else if (port >= PORT_TC1) |
| return HPD_PORT_TC1 + port - PORT_TC1; |
| else |
| return HPD_PORT_A + port - PORT_A; |
| } |
| |
| static enum hpd_pin dg1_hpd_pin(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| if (port >= PORT_TC1) |
| return HPD_PORT_C + port - PORT_TC1; |
| else |
| return HPD_PORT_A + port - PORT_A; |
| } |
| |
| static enum hpd_pin tgl_hpd_pin(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| if (port >= PORT_TC1) |
| return HPD_PORT_TC1 + port - PORT_TC1; |
| else |
| return HPD_PORT_A + port - PORT_A; |
| } |
| |
| static enum hpd_pin rkl_hpd_pin(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| if (HAS_PCH_TGP(dev_priv)) |
| return tgl_hpd_pin(dev_priv, port); |
| |
| if (port >= PORT_TC1) |
| return HPD_PORT_C + port - PORT_TC1; |
| else |
| return HPD_PORT_A + port - PORT_A; |
| } |
| |
| static enum hpd_pin icl_hpd_pin(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| if (port >= PORT_C) |
| return HPD_PORT_TC1 + port - PORT_C; |
| else |
| return HPD_PORT_A + port - PORT_A; |
| } |
| |
| static enum hpd_pin ehl_hpd_pin(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| if (port == PORT_D) |
| return HPD_PORT_A; |
| |
| if (HAS_PCH_MCC(dev_priv)) |
| return icl_hpd_pin(dev_priv, port); |
| |
| return HPD_PORT_A + port - PORT_A; |
| } |
| |
| static enum hpd_pin skl_hpd_pin(struct drm_i915_private *dev_priv, enum port port) |
| { |
| if (HAS_PCH_TGP(dev_priv)) |
| return icl_hpd_pin(dev_priv, port); |
| |
| return HPD_PORT_A + port - PORT_A; |
| } |
| |
| static bool intel_ddi_is_tc(struct drm_i915_private *i915, enum port port) |
| { |
| if (DISPLAY_VER(i915) >= 12) |
| return port >= PORT_TC1; |
| else if (DISPLAY_VER(i915) >= 11) |
| return port >= PORT_C; |
| else |
| return false; |
| } |
| |
| static void intel_ddi_encoder_suspend(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| intel_dp_encoder_suspend(encoder); |
| |
| if (!intel_phy_is_tc(i915, phy)) |
| return; |
| |
| intel_tc_port_flush_work(dig_port); |
| } |
| |
| static void intel_ddi_encoder_shutdown(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| enum phy phy = intel_port_to_phy(i915, encoder->port); |
| |
| intel_dp_encoder_shutdown(encoder); |
| intel_hdmi_encoder_shutdown(encoder); |
| |
| if (!intel_phy_is_tc(i915, phy)) |
| return; |
| |
| intel_tc_port_flush_work(dig_port); |
| } |
| |
| #define port_tc_name(port) ((port) - PORT_TC1 + '1') |
| #define tc_port_name(tc_port) ((tc_port) - TC_PORT_1 + '1') |
| |
| void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port) |
| { |
| struct intel_digital_port *dig_port; |
| struct intel_encoder *encoder; |
| const struct intel_bios_encoder_data *devdata; |
| bool init_hdmi, init_dp; |
| enum phy phy = intel_port_to_phy(dev_priv, port); |
| |
| /* |
| * On platforms with HTI (aka HDPORT), if it's enabled at boot it may |
| * have taken over some of the PHYs and made them unavailable to the |
| * driver. In that case we should skip initializing the corresponding |
| * outputs. |
| */ |
| if (hti_uses_phy(dev_priv, phy)) { |
| drm_dbg_kms(&dev_priv->drm, "PORT %c / PHY %c reserved by HTI\n", |
| port_name(port), phy_name(phy)); |
| return; |
| } |
| |
| devdata = intel_bios_encoder_data_lookup(dev_priv, port); |
| if (!devdata) { |
| drm_dbg_kms(&dev_priv->drm, |
| "VBT says port %c is not present\n", |
| port_name(port)); |
| return; |
| } |
| |
| init_hdmi = intel_bios_encoder_supports_dvi(devdata) || |
| intel_bios_encoder_supports_hdmi(devdata); |
| init_dp = intel_bios_encoder_supports_dp(devdata); |
| |
| if (intel_bios_is_lspcon_present(dev_priv, port)) { |
| /* |
| * Lspcon device needs to be driven with DP connector |
| * with special detection sequence. So make sure DP |
| * is initialized before lspcon. |
| */ |
| init_dp = true; |
| init_hdmi = false; |
| drm_dbg_kms(&dev_priv->drm, "VBT says port %c has lspcon\n", |
| port_name(port)); |
| } |
| |
| if (!init_dp && !init_hdmi) { |
| drm_dbg_kms(&dev_priv->drm, |
| "VBT says port %c is not DVI/HDMI/DP compatible, respect it\n", |
| port_name(port)); |
| return; |
| } |
| |
| dig_port = kzalloc(sizeof(*dig_port), GFP_KERNEL); |
| if (!dig_port) |
| return; |
| |
| encoder = &dig_port->base; |
| encoder->devdata = devdata; |
| |
| if (DISPLAY_VER(dev_priv) >= 13 && port >= PORT_D_XELPD) { |
| drm_encoder_init(&dev_priv->drm, &encoder->base, &intel_ddi_funcs, |
| DRM_MODE_ENCODER_TMDS, |
| "DDI %c/PHY %c", |
| port_name(port - PORT_D_XELPD + PORT_D), |
| phy_name(phy)); |
| } else if (DISPLAY_VER(dev_priv) >= 12) { |
| enum tc_port tc_port = intel_port_to_tc(dev_priv, port); |
| |
| drm_encoder_init(&dev_priv->drm, &encoder->base, &intel_ddi_funcs, |
| DRM_MODE_ENCODER_TMDS, |
| "DDI %s%c/PHY %s%c", |
| port >= PORT_TC1 ? "TC" : "", |
| port >= PORT_TC1 ? port_tc_name(port) : port_name(port), |
| tc_port != TC_PORT_NONE ? "TC" : "", |
| tc_port != TC_PORT_NONE ? tc_port_name(tc_port) : phy_name(phy)); |
| } else if (DISPLAY_VER(dev_priv) >= 11) { |
| enum tc_port tc_port = intel_port_to_tc(dev_priv, port); |
| |
| drm_encoder_init(&dev_priv->drm, &encoder->base, &intel_ddi_funcs, |
| DRM_MODE_ENCODER_TMDS, |
| "DDI %c%s/PHY %s%c", |
| port_name(port), |
| port >= PORT_C ? " (TC)" : "", |
| tc_port != TC_PORT_NONE ? "TC" : "", |
| tc_port != TC_PORT_NONE ? tc_port_name(tc_port) : phy_name(phy)); |
| } else { |
| drm_encoder_init(&dev_priv->drm, &encoder->base, &intel_ddi_funcs, |
| DRM_MODE_ENCODER_TMDS, |
| "DDI %c/PHY %c", port_name(port), phy_name(phy)); |
| } |
| |
| mutex_init(&dig_port->hdcp_mutex); |
| dig_port->num_hdcp_streams = 0; |
| |
| encoder->hotplug = intel_ddi_hotplug; |
| encoder->compute_output_type = intel_ddi_compute_output_type; |
| encoder->compute_config = intel_ddi_compute_config; |
| encoder->compute_config_late = intel_ddi_compute_config_late; |
| encoder->enable = intel_enable_ddi; |
| encoder->pre_pll_enable = intel_ddi_pre_pll_enable; |
| encoder->pre_enable = intel_ddi_pre_enable; |
| encoder->pre_disable = intel_pre_disable_ddi; |
| encoder->disable = intel_disable_ddi; |
| encoder->post_disable = intel_ddi_post_disable; |
| encoder->update_pipe = intel_ddi_update_pipe; |
| encoder->get_hw_state = intel_ddi_get_hw_state; |
| encoder->sync_state = intel_ddi_sync_state; |
| encoder->initial_fastset_check = intel_ddi_initial_fastset_check; |
| encoder->suspend = intel_ddi_encoder_suspend; |
| encoder->shutdown = intel_ddi_encoder_shutdown; |
| encoder->get_power_domains = intel_ddi_get_power_domains; |
| |
| encoder->type = INTEL_OUTPUT_DDI; |
| encoder->power_domain = intel_port_to_power_domain(port); |
| encoder->port = port; |
| encoder->cloneable = 0; |
| encoder->pipe_mask = ~0; |
| |
| if (IS_DG2(dev_priv)) { |
| encoder->enable_clock = intel_mpllb_enable; |
| encoder->disable_clock = intel_mpllb_disable; |
| encoder->get_config = dg2_ddi_get_config; |
| } else if (IS_ALDERLAKE_S(dev_priv)) { |
| encoder->enable_clock = adls_ddi_enable_clock; |
| encoder->disable_clock = adls_ddi_disable_clock; |
| encoder->is_clock_enabled = adls_ddi_is_clock_enabled; |
| encoder->get_config = adls_ddi_get_config; |
| } else if (IS_ROCKETLAKE(dev_priv)) { |
| encoder->enable_clock = rkl_ddi_enable_clock; |
| encoder->disable_clock = rkl_ddi_disable_clock; |
| encoder->is_clock_enabled = rkl_ddi_is_clock_enabled; |
| encoder->get_config = rkl_ddi_get_config; |
| } else if (IS_DG1(dev_priv)) { |
| encoder->enable_clock = dg1_ddi_enable_clock; |
| encoder->disable_clock = dg1_ddi_disable_clock; |
| encoder->is_clock_enabled = dg1_ddi_is_clock_enabled; |
| encoder->get_config = dg1_ddi_get_config; |
| } else if (IS_JSL_EHL(dev_priv)) { |
| if (intel_ddi_is_tc(dev_priv, port)) { |
| encoder->enable_clock = jsl_ddi_tc_enable_clock; |
| encoder->disable_clock = jsl_ddi_tc_disable_clock; |
| encoder->is_clock_enabled = jsl_ddi_tc_is_clock_enabled; |
| encoder->get_config = icl_ddi_combo_get_config; |
| } else { |
| encoder->enable_clock = icl_ddi_combo_enable_clock; |
| encoder->disable_clock = icl_ddi_combo_disable_clock; |
| encoder->is_clock_enabled = icl_ddi_combo_is_clock_enabled; |
| encoder->get_config = icl_ddi_combo_get_config; |
| } |
| } else if (DISPLAY_VER(dev_priv) >= 11) { |
| if (intel_ddi_is_tc(dev_priv, port)) { |
| encoder->enable_clock = icl_ddi_tc_enable_clock; |
| encoder->disable_clock = icl_ddi_tc_disable_clock; |
| encoder->is_clock_enabled = icl_ddi_tc_is_clock_enabled; |
| encoder->get_config = icl_ddi_tc_get_config; |
| } else { |
| encoder->enable_clock = icl_ddi_combo_enable_clock; |
| encoder->disable_clock = icl_ddi_combo_disable_clock; |
| encoder->is_clock_enabled = icl_ddi_combo_is_clock_enabled; |
| encoder->get_config = icl_ddi_combo_get_config; |
| } |
| } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) { |
| /* BXT/GLK have fixed PLL->port mapping */ |
| encoder->get_config = bxt_ddi_get_config; |
| } else if (DISPLAY_VER(dev_priv) == 9) { |
| encoder->enable_clock = skl_ddi_enable_clock; |
| encoder->disable_clock = skl_ddi_disable_clock; |
| encoder->is_clock_enabled = skl_ddi_is_clock_enabled; |
| encoder->get_config = skl_ddi_get_config; |
| } else if (IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) { |
| encoder->enable_clock = hsw_ddi_enable_clock; |
| encoder->disable_clock = hsw_ddi_disable_clock; |
| encoder->is_clock_enabled = hsw_ddi_is_clock_enabled; |
| encoder->get_config = hsw_ddi_get_config; |
| } |
| |
| if (IS_DG2(dev_priv)) { |
| encoder->set_signal_levels = intel_snps_phy_set_signal_levels; |
| } else if (DISPLAY_VER(dev_priv) >= 12) { |
| if (intel_phy_is_combo(dev_priv, phy)) |
| encoder->set_signal_levels = icl_combo_phy_set_signal_levels; |
| else |
| encoder->set_signal_levels = tgl_dkl_phy_set_signal_levels; |
| } else if (DISPLAY_VER(dev_priv) >= 11) { |
| if (intel_phy_is_combo(dev_priv, phy)) |
| encoder->set_signal_levels = icl_combo_phy_set_signal_levels; |
| else |
| encoder->set_signal_levels = icl_mg_phy_set_signal_levels; |
| } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) { |
| encoder->set_signal_levels = bxt_ddi_phy_set_signal_levels; |
| } else { |
| encoder->set_signal_levels = hsw_set_signal_levels; |
| } |
| |
| intel_ddi_buf_trans_init(encoder); |
| |
| if (DISPLAY_VER(dev_priv) >= 13) |
| encoder->hpd_pin = xelpd_hpd_pin(dev_priv, port); |
| else if (IS_DG1(dev_priv)) |
| encoder->hpd_pin = dg1_hpd_pin(dev_priv, port); |
| else if (IS_ROCKETLAKE(dev_priv)) |
| encoder->hpd_pin = rkl_hpd_pin(dev_priv, port); |
| else if (DISPLAY_VER(dev_priv) >= 12) |
| encoder->hpd_pin = tgl_hpd_pin(dev_priv, port); |
| else if (IS_JSL_EHL(dev_priv)) |
| encoder->hpd_pin = ehl_hpd_pin(dev_priv, port); |
| else if (DISPLAY_VER(dev_priv) == 11) |
| encoder->hpd_pin = icl_hpd_pin(dev_priv, port); |
| else if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv)) |
| encoder->hpd_pin = skl_hpd_pin(dev_priv, port); |
| else |
| encoder->hpd_pin = intel_hpd_pin_default(dev_priv, port); |
| |
| if (DISPLAY_VER(dev_priv) >= 11) |
| dig_port->saved_port_bits = |
| intel_de_read(dev_priv, DDI_BUF_CTL(port)) |
| & DDI_BUF_PORT_REVERSAL; |
| else |
| dig_port->saved_port_bits = |
| intel_de_read(dev_priv, DDI_BUF_CTL(port)) |
| & (DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES); |
| |
| if (intel_bios_is_lane_reversal_needed(dev_priv, port)) |
| dig_port->saved_port_bits |= DDI_BUF_PORT_REVERSAL; |
| |
| dig_port->dp.output_reg = INVALID_MMIO_REG; |
| dig_port->max_lanes = intel_ddi_max_lanes(dig_port); |
| dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port); |
| |
| if (intel_phy_is_tc(dev_priv, phy)) { |
| bool is_legacy = |
| !intel_bios_encoder_supports_typec_usb(devdata) && |
| !intel_bios_encoder_supports_tbt(devdata); |
| |
| intel_tc_port_init(dig_port, is_legacy); |
| |
| encoder->update_prepare = intel_ddi_update_prepare; |
| encoder->update_complete = intel_ddi_update_complete; |
| } |
| |
| drm_WARN_ON(&dev_priv->drm, port > PORT_I); |
| dig_port->ddi_io_power_domain = POWER_DOMAIN_PORT_DDI_A_IO + |
| port - PORT_A; |
| |
| if (init_dp) { |
| if (!intel_ddi_init_dp_connector(dig_port)) |
| goto err; |
| |
| dig_port->hpd_pulse = intel_dp_hpd_pulse; |
| |
| if (dig_port->dp.mso_link_count) |
| encoder->pipe_mask = intel_ddi_splitter_pipe_mask(dev_priv); |
| } |
| |
| /* In theory we don't need the encoder->type check, but leave it just in |
| * case we have some really bad VBTs... */ |
| if (encoder->type != INTEL_OUTPUT_EDP && init_hdmi) { |
| if (!intel_ddi_init_hdmi_connector(dig_port)) |
| goto err; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 11) { |
| if (intel_phy_is_tc(dev_priv, phy)) |
| dig_port->connected = intel_tc_port_connected; |
| else |
| dig_port->connected = lpt_digital_port_connected; |
| } else if (DISPLAY_VER(dev_priv) >= 8) { |
| if (port == PORT_A || IS_GEMINILAKE(dev_priv) || |
| IS_BROXTON(dev_priv)) |
| dig_port->connected = bdw_digital_port_connected; |
| else |
| dig_port->connected = lpt_digital_port_connected; |
| } else { |
| if (port == PORT_A) |
| dig_port->connected = hsw_digital_port_connected; |
| else |
| dig_port->connected = lpt_digital_port_connected; |
| } |
| |
| intel_infoframe_init(dig_port); |
| |
| return; |
| |
| err: |
| drm_encoder_cleanup(&encoder->base); |
| kfree(dig_port); |
| } |