| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * fsgsbase.c, an fsgsbase test |
| * Copyright (c) 2014-2016 Andy Lutomirski |
| */ |
| |
| #define _GNU_SOURCE |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <stdbool.h> |
| #include <string.h> |
| #include <sys/syscall.h> |
| #include <unistd.h> |
| #include <err.h> |
| #include <sys/user.h> |
| #include <asm/prctl.h> |
| #include <sys/prctl.h> |
| #include <signal.h> |
| #include <limits.h> |
| #include <sys/ucontext.h> |
| #include <sched.h> |
| #include <linux/futex.h> |
| #include <pthread.h> |
| #include <asm/ldt.h> |
| #include <sys/mman.h> |
| #include <stddef.h> |
| #include <sys/ptrace.h> |
| #include <sys/wait.h> |
| #include <setjmp.h> |
| |
| #ifndef __x86_64__ |
| # error This test is 64-bit only |
| #endif |
| |
| static volatile sig_atomic_t want_segv; |
| static volatile unsigned long segv_addr; |
| |
| static unsigned short *shared_scratch; |
| |
| static int nerrs; |
| |
| static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), |
| int flags) |
| { |
| struct sigaction sa; |
| memset(&sa, 0, sizeof(sa)); |
| sa.sa_sigaction = handler; |
| sa.sa_flags = SA_SIGINFO | flags; |
| sigemptyset(&sa.sa_mask); |
| if (sigaction(sig, &sa, 0)) |
| err(1, "sigaction"); |
| } |
| |
| static void clearhandler(int sig) |
| { |
| struct sigaction sa; |
| memset(&sa, 0, sizeof(sa)); |
| sa.sa_handler = SIG_DFL; |
| sigemptyset(&sa.sa_mask); |
| if (sigaction(sig, &sa, 0)) |
| err(1, "sigaction"); |
| } |
| |
| static void sigsegv(int sig, siginfo_t *si, void *ctx_void) |
| { |
| ucontext_t *ctx = (ucontext_t*)ctx_void; |
| |
| if (!want_segv) { |
| clearhandler(SIGSEGV); |
| return; /* Crash cleanly. */ |
| } |
| |
| want_segv = false; |
| segv_addr = (unsigned long)si->si_addr; |
| |
| ctx->uc_mcontext.gregs[REG_RIP] += 4; /* Skip the faulting mov */ |
| |
| } |
| |
| static jmp_buf jmpbuf; |
| |
| static void sigill(int sig, siginfo_t *si, void *ctx_void) |
| { |
| siglongjmp(jmpbuf, 1); |
| } |
| |
| static bool have_fsgsbase; |
| |
| static inline unsigned long rdgsbase(void) |
| { |
| unsigned long gsbase; |
| |
| asm volatile("rdgsbase %0" : "=r" (gsbase) :: "memory"); |
| |
| return gsbase; |
| } |
| |
| static inline unsigned long rdfsbase(void) |
| { |
| unsigned long fsbase; |
| |
| asm volatile("rdfsbase %0" : "=r" (fsbase) :: "memory"); |
| |
| return fsbase; |
| } |
| |
| static inline void wrgsbase(unsigned long gsbase) |
| { |
| asm volatile("wrgsbase %0" :: "r" (gsbase) : "memory"); |
| } |
| |
| static inline void wrfsbase(unsigned long fsbase) |
| { |
| asm volatile("wrfsbase %0" :: "r" (fsbase) : "memory"); |
| } |
| |
| enum which_base { FS, GS }; |
| |
| static unsigned long read_base(enum which_base which) |
| { |
| unsigned long offset; |
| /* |
| * Unless we have FSGSBASE, there's no direct way to do this from |
| * user mode. We can get at it indirectly using signals, though. |
| */ |
| |
| want_segv = true; |
| |
| offset = 0; |
| if (which == FS) { |
| /* Use a constant-length instruction here. */ |
| asm volatile ("mov %%fs:(%%rcx), %%rax" : : "c" (offset) : "rax"); |
| } else { |
| asm volatile ("mov %%gs:(%%rcx), %%rax" : : "c" (offset) : "rax"); |
| } |
| if (!want_segv) |
| return segv_addr + offset; |
| |
| /* |
| * If that didn't segfault, try the other end of the address space. |
| * Unless we get really unlucky and run into the vsyscall page, this |
| * is guaranteed to segfault. |
| */ |
| |
| offset = (ULONG_MAX >> 1) + 1; |
| if (which == FS) { |
| asm volatile ("mov %%fs:(%%rcx), %%rax" |
| : : "c" (offset) : "rax"); |
| } else { |
| asm volatile ("mov %%gs:(%%rcx), %%rax" |
| : : "c" (offset) : "rax"); |
| } |
| if (!want_segv) |
| return segv_addr + offset; |
| |
| abort(); |
| } |
| |
| static void check_gs_value(unsigned long value) |
| { |
| unsigned long base; |
| unsigned short sel; |
| |
| printf("[RUN]\tARCH_SET_GS to 0x%lx\n", value); |
| if (syscall(SYS_arch_prctl, ARCH_SET_GS, value) != 0) |
| err(1, "ARCH_SET_GS"); |
| |
| asm volatile ("mov %%gs, %0" : "=rm" (sel)); |
| base = read_base(GS); |
| if (base == value) { |
| printf("[OK]\tGSBASE was set as expected (selector 0x%hx)\n", |
| sel); |
| } else { |
| nerrs++; |
| printf("[FAIL]\tGSBASE was not as expected: got 0x%lx (selector 0x%hx)\n", |
| base, sel); |
| } |
| |
| if (syscall(SYS_arch_prctl, ARCH_GET_GS, &base) != 0) |
| err(1, "ARCH_GET_GS"); |
| if (base == value) { |
| printf("[OK]\tARCH_GET_GS worked as expected (selector 0x%hx)\n", |
| sel); |
| } else { |
| nerrs++; |
| printf("[FAIL]\tARCH_GET_GS was not as expected: got 0x%lx (selector 0x%hx)\n", |
| base, sel); |
| } |
| } |
| |
| static void mov_0_gs(unsigned long initial_base, bool schedule) |
| { |
| unsigned long base, arch_base; |
| |
| printf("[RUN]\tARCH_SET_GS to 0x%lx then mov 0 to %%gs%s\n", initial_base, schedule ? " and schedule " : ""); |
| if (syscall(SYS_arch_prctl, ARCH_SET_GS, initial_base) != 0) |
| err(1, "ARCH_SET_GS"); |
| |
| if (schedule) |
| usleep(10); |
| |
| asm volatile ("mov %0, %%gs" : : "rm" (0)); |
| base = read_base(GS); |
| if (syscall(SYS_arch_prctl, ARCH_GET_GS, &arch_base) != 0) |
| err(1, "ARCH_GET_GS"); |
| if (base == arch_base) { |
| printf("[OK]\tGSBASE is 0x%lx\n", base); |
| } else { |
| nerrs++; |
| printf("[FAIL]\tGSBASE changed to 0x%lx but kernel reports 0x%lx\n", base, arch_base); |
| } |
| } |
| |
| static volatile unsigned long remote_base; |
| static volatile bool remote_hard_zero; |
| static volatile unsigned int ftx; |
| |
| /* |
| * ARCH_SET_FS/GS(0) may or may not program a selector of zero. HARD_ZERO |
| * means to force the selector to zero to improve test coverage. |
| */ |
| #define HARD_ZERO 0xa1fa5f343cb85fa4 |
| |
| static void do_remote_base() |
| { |
| unsigned long to_set = remote_base; |
| bool hard_zero = false; |
| if (to_set == HARD_ZERO) { |
| to_set = 0; |
| hard_zero = true; |
| } |
| |
| if (syscall(SYS_arch_prctl, ARCH_SET_GS, to_set) != 0) |
| err(1, "ARCH_SET_GS"); |
| |
| if (hard_zero) |
| asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0)); |
| |
| unsigned short sel; |
| asm volatile ("mov %%gs, %0" : "=rm" (sel)); |
| printf("\tother thread: ARCH_SET_GS(0x%lx)%s -- sel is 0x%hx\n", |
| to_set, hard_zero ? " and clear gs" : "", sel); |
| } |
| |
| static __thread int set_thread_area_entry_number = -1; |
| |
| static unsigned short load_gs(void) |
| { |
| /* |
| * Sets GS != 0 and GSBASE != 0 but arranges for the kernel to think |
| * that GSBASE == 0 (i.e. thread.gsbase == 0). |
| */ |
| |
| /* Step 1: tell the kernel that we have GSBASE == 0. */ |
| if (syscall(SYS_arch_prctl, ARCH_SET_GS, 0) != 0) |
| err(1, "ARCH_SET_GS"); |
| |
| /* Step 2: change GSBASE without telling the kernel. */ |
| struct user_desc desc = { |
| .entry_number = 0, |
| .base_addr = 0xBAADF00D, |
| .limit = 0xfffff, |
| .seg_32bit = 1, |
| .contents = 0, /* Data, grow-up */ |
| .read_exec_only = 0, |
| .limit_in_pages = 1, |
| .seg_not_present = 0, |
| .useable = 0 |
| }; |
| if (syscall(SYS_modify_ldt, 1, &desc, sizeof(desc)) == 0) { |
| printf("\tusing LDT slot 0\n"); |
| asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0x7)); |
| return 0x7; |
| } else { |
| /* No modify_ldt for us (configured out, perhaps) */ |
| |
| struct user_desc *low_desc = mmap( |
| NULL, sizeof(desc), |
| PROT_READ | PROT_WRITE, |
| MAP_PRIVATE | MAP_ANONYMOUS | MAP_32BIT, -1, 0); |
| memcpy(low_desc, &desc, sizeof(desc)); |
| |
| low_desc->entry_number = set_thread_area_entry_number; |
| |
| /* 32-bit set_thread_area */ |
| long ret; |
| asm volatile ("int $0x80" |
| : "=a" (ret), "+m" (*low_desc) |
| : "a" (243), "b" (low_desc) |
| : "r8", "r9", "r10", "r11"); |
| memcpy(&desc, low_desc, sizeof(desc)); |
| munmap(low_desc, sizeof(desc)); |
| |
| if (ret != 0) { |
| printf("[NOTE]\tcould not create a segment -- test won't do anything\n"); |
| return 0; |
| } |
| printf("\tusing GDT slot %d\n", desc.entry_number); |
| set_thread_area_entry_number = desc.entry_number; |
| |
| unsigned short gs = (unsigned short)((desc.entry_number << 3) | 0x3); |
| asm volatile ("mov %0, %%gs" : : "rm" (gs)); |
| return gs; |
| } |
| } |
| |
| void test_wrbase(unsigned short index, unsigned long base) |
| { |
| unsigned short newindex; |
| unsigned long newbase; |
| |
| printf("[RUN]\tGS = 0x%hx, GSBASE = 0x%lx\n", index, base); |
| |
| asm volatile ("mov %0, %%gs" : : "rm" (index)); |
| wrgsbase(base); |
| |
| remote_base = 0; |
| ftx = 1; |
| syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0); |
| while (ftx != 0) |
| syscall(SYS_futex, &ftx, FUTEX_WAIT, 1, NULL, NULL, 0); |
| |
| asm volatile ("mov %%gs, %0" : "=rm" (newindex)); |
| newbase = rdgsbase(); |
| |
| if (newindex == index && newbase == base) { |
| printf("[OK]\tIndex and base were preserved\n"); |
| } else { |
| printf("[FAIL]\tAfter switch, GS = 0x%hx and GSBASE = 0x%lx\n", |
| newindex, newbase); |
| nerrs++; |
| } |
| } |
| |
| static void *threadproc(void *ctx) |
| { |
| while (1) { |
| while (ftx == 0) |
| syscall(SYS_futex, &ftx, FUTEX_WAIT, 0, NULL, NULL, 0); |
| if (ftx == 3) |
| return NULL; |
| |
| if (ftx == 1) { |
| do_remote_base(); |
| } else if (ftx == 2) { |
| /* |
| * On AMD chips, this causes GSBASE != 0, GS == 0, and |
| * thread.gsbase == 0. |
| */ |
| |
| load_gs(); |
| asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0)); |
| } else { |
| errx(1, "helper thread got bad command"); |
| } |
| |
| ftx = 0; |
| syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0); |
| } |
| } |
| |
| static void set_gs_and_switch_to(unsigned long local, |
| unsigned short force_sel, |
| unsigned long remote) |
| { |
| unsigned long base; |
| unsigned short sel_pre_sched, sel_post_sched; |
| |
| bool hard_zero = false; |
| if (local == HARD_ZERO) { |
| hard_zero = true; |
| local = 0; |
| } |
| |
| printf("[RUN]\tARCH_SET_GS(0x%lx)%s, then schedule to 0x%lx\n", |
| local, hard_zero ? " and clear gs" : "", remote); |
| if (force_sel) |
| printf("\tBefore schedule, set selector to 0x%hx\n", force_sel); |
| if (syscall(SYS_arch_prctl, ARCH_SET_GS, local) != 0) |
| err(1, "ARCH_SET_GS"); |
| if (hard_zero) |
| asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0)); |
| |
| if (read_base(GS) != local) { |
| nerrs++; |
| printf("[FAIL]\tGSBASE wasn't set as expected\n"); |
| } |
| |
| if (force_sel) { |
| asm volatile ("mov %0, %%gs" : : "rm" (force_sel)); |
| sel_pre_sched = force_sel; |
| local = read_base(GS); |
| |
| /* |
| * Signal delivery is quite likely to change a selector |
| * of 1, 2, or 3 back to 0 due to IRET being defective. |
| */ |
| asm volatile ("mov %0, %%gs" : : "rm" (force_sel)); |
| } else { |
| asm volatile ("mov %%gs, %0" : "=rm" (sel_pre_sched)); |
| } |
| |
| remote_base = remote; |
| ftx = 1; |
| syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0); |
| while (ftx != 0) |
| syscall(SYS_futex, &ftx, FUTEX_WAIT, 1, NULL, NULL, 0); |
| |
| asm volatile ("mov %%gs, %0" : "=rm" (sel_post_sched)); |
| base = read_base(GS); |
| if (base == local && sel_pre_sched == sel_post_sched) { |
| printf("[OK]\tGS/BASE remained 0x%hx/0x%lx\n", |
| sel_pre_sched, local); |
| } else if (base == local && sel_pre_sched >= 1 && sel_pre_sched <= 3 && |
| sel_post_sched == 0) { |
| /* |
| * IRET is misdesigned and will squash selectors 1, 2, or 3 |
| * to zero. Don't fail the test just because this happened. |
| */ |
| printf("[OK]\tGS/BASE changed from 0x%hx/0x%lx to 0x%hx/0x%lx because IRET is defective\n", |
| sel_pre_sched, local, sel_post_sched, base); |
| } else { |
| nerrs++; |
| printf("[FAIL]\tGS/BASE changed from 0x%hx/0x%lx to 0x%hx/0x%lx\n", |
| sel_pre_sched, local, sel_post_sched, base); |
| } |
| } |
| |
| static void test_unexpected_base(void) |
| { |
| unsigned long base; |
| |
| printf("[RUN]\tARCH_SET_GS(0), clear gs, then manipulate GSBASE in a different thread\n"); |
| if (syscall(SYS_arch_prctl, ARCH_SET_GS, 0) != 0) |
| err(1, "ARCH_SET_GS"); |
| asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0)); |
| |
| ftx = 2; |
| syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0); |
| while (ftx != 0) |
| syscall(SYS_futex, &ftx, FUTEX_WAIT, 1, NULL, NULL, 0); |
| |
| base = read_base(GS); |
| if (base == 0) { |
| printf("[OK]\tGSBASE remained 0\n"); |
| } else { |
| nerrs++; |
| printf("[FAIL]\tGSBASE changed to 0x%lx\n", base); |
| } |
| } |
| |
| #define USER_REGS_OFFSET(r) offsetof(struct user_regs_struct, r) |
| |
| static void test_ptrace_write_gs_read_base(void) |
| { |
| int status; |
| pid_t child = fork(); |
| |
| if (child < 0) |
| err(1, "fork"); |
| |
| if (child == 0) { |
| printf("[RUN]\tPTRACE_POKE GS, read GSBASE back\n"); |
| |
| printf("[RUN]\tARCH_SET_GS to 1\n"); |
| if (syscall(SYS_arch_prctl, ARCH_SET_GS, 1) != 0) |
| err(1, "ARCH_SET_GS"); |
| |
| if (ptrace(PTRACE_TRACEME, 0, NULL, NULL) != 0) |
| err(1, "PTRACE_TRACEME"); |
| |
| raise(SIGTRAP); |
| _exit(0); |
| } |
| |
| wait(&status); |
| |
| if (WSTOPSIG(status) == SIGTRAP) { |
| unsigned long base; |
| unsigned long gs_offset = USER_REGS_OFFSET(gs); |
| unsigned long base_offset = USER_REGS_OFFSET(gs_base); |
| |
| /* Read the initial base. It should be 1. */ |
| base = ptrace(PTRACE_PEEKUSER, child, base_offset, NULL); |
| if (base == 1) { |
| printf("[OK]\tGSBASE started at 1\n"); |
| } else { |
| nerrs++; |
| printf("[FAIL]\tGSBASE started at 0x%lx\n", base); |
| } |
| |
| printf("[RUN]\tSet GS = 0x7, read GSBASE\n"); |
| |
| /* Poke an LDT selector into GS. */ |
| if (ptrace(PTRACE_POKEUSER, child, gs_offset, 0x7) != 0) |
| err(1, "PTRACE_POKEUSER"); |
| |
| /* And read the base. */ |
| base = ptrace(PTRACE_PEEKUSER, child, base_offset, NULL); |
| |
| if (base == 0 || base == 1) { |
| printf("[OK]\tGSBASE reads as 0x%lx with invalid GS\n", base); |
| } else { |
| nerrs++; |
| printf("[FAIL]\tGSBASE=0x%lx (should be 0 or 1)\n", base); |
| } |
| } |
| |
| ptrace(PTRACE_CONT, child, NULL, NULL); |
| |
| wait(&status); |
| if (!WIFEXITED(status)) |
| printf("[WARN]\tChild didn't exit cleanly.\n"); |
| } |
| |
| static void test_ptrace_write_gsbase(void) |
| { |
| int status; |
| pid_t child = fork(); |
| |
| if (child < 0) |
| err(1, "fork"); |
| |
| if (child == 0) { |
| printf("[RUN]\tPTRACE_POKE(), write GSBASE from ptracer\n"); |
| |
| *shared_scratch = load_gs(); |
| |
| if (ptrace(PTRACE_TRACEME, 0, NULL, NULL) != 0) |
| err(1, "PTRACE_TRACEME"); |
| |
| raise(SIGTRAP); |
| _exit(0); |
| } |
| |
| wait(&status); |
| |
| if (WSTOPSIG(status) == SIGTRAP) { |
| unsigned long gs, base; |
| unsigned long gs_offset = USER_REGS_OFFSET(gs); |
| unsigned long base_offset = USER_REGS_OFFSET(gs_base); |
| |
| gs = ptrace(PTRACE_PEEKUSER, child, gs_offset, NULL); |
| |
| if (gs != *shared_scratch) { |
| nerrs++; |
| printf("[FAIL]\tGS is not prepared with nonzero\n"); |
| goto END; |
| } |
| |
| if (ptrace(PTRACE_POKEUSER, child, base_offset, 0xFF) != 0) |
| err(1, "PTRACE_POKEUSER"); |
| |
| gs = ptrace(PTRACE_PEEKUSER, child, gs_offset, NULL); |
| base = ptrace(PTRACE_PEEKUSER, child, base_offset, NULL); |
| |
| /* |
| * In a non-FSGSBASE system, the nonzero selector will load |
| * GSBASE (again). But what is tested here is whether the |
| * selector value is changed or not by the GSBASE write in |
| * a ptracer. |
| */ |
| if (gs != *shared_scratch) { |
| nerrs++; |
| printf("[FAIL]\tGS changed to %lx\n", gs); |
| |
| /* |
| * On older kernels, poking a nonzero value into the |
| * base would zero the selector. On newer kernels, |
| * this behavior has changed -- poking the base |
| * changes only the base and, if FSGSBASE is not |
| * available, this may have no effect once the tracee |
| * is resumed. |
| */ |
| if (gs == 0) |
| printf("\tNote: this is expected behavior on older kernels.\n"); |
| } else if (have_fsgsbase && (base != 0xFF)) { |
| nerrs++; |
| printf("[FAIL]\tGSBASE changed to %lx\n", base); |
| } else { |
| printf("[OK]\tGS remained 0x%hx", *shared_scratch); |
| if (have_fsgsbase) |
| printf(" and GSBASE changed to 0xFF"); |
| printf("\n"); |
| } |
| } |
| |
| END: |
| ptrace(PTRACE_CONT, child, NULL, NULL); |
| wait(&status); |
| if (!WIFEXITED(status)) |
| printf("[WARN]\tChild didn't exit cleanly.\n"); |
| } |
| |
| int main() |
| { |
| pthread_t thread; |
| |
| shared_scratch = mmap(NULL, 4096, PROT_READ | PROT_WRITE, |
| MAP_ANONYMOUS | MAP_SHARED, -1, 0); |
| |
| /* Do these tests before we have an LDT. */ |
| test_ptrace_write_gs_read_base(); |
| |
| /* Probe FSGSBASE */ |
| sethandler(SIGILL, sigill, 0); |
| if (sigsetjmp(jmpbuf, 1) == 0) { |
| rdfsbase(); |
| have_fsgsbase = true; |
| printf("\tFSGSBASE instructions are enabled\n"); |
| } else { |
| printf("\tFSGSBASE instructions are disabled\n"); |
| } |
| clearhandler(SIGILL); |
| |
| sethandler(SIGSEGV, sigsegv, 0); |
| |
| check_gs_value(0); |
| check_gs_value(1); |
| check_gs_value(0x200000000); |
| check_gs_value(0); |
| check_gs_value(0x200000000); |
| check_gs_value(1); |
| |
| for (int sched = 0; sched < 2; sched++) { |
| mov_0_gs(0, !!sched); |
| mov_0_gs(1, !!sched); |
| mov_0_gs(0x200000000, !!sched); |
| } |
| |
| /* Set up for multithreading. */ |
| |
| cpu_set_t cpuset; |
| CPU_ZERO(&cpuset); |
| CPU_SET(0, &cpuset); |
| if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0) |
| err(1, "sched_setaffinity to CPU 0"); /* should never fail */ |
| |
| if (pthread_create(&thread, 0, threadproc, 0) != 0) |
| err(1, "pthread_create"); |
| |
| static unsigned long bases_with_hard_zero[] = { |
| 0, HARD_ZERO, 1, 0x200000000, |
| }; |
| |
| for (int local = 0; local < 4; local++) { |
| for (int remote = 0; remote < 4; remote++) { |
| for (unsigned short s = 0; s < 5; s++) { |
| unsigned short sel = s; |
| if (s == 4) |
| asm ("mov %%ss, %0" : "=rm" (sel)); |
| set_gs_and_switch_to( |
| bases_with_hard_zero[local], |
| sel, |
| bases_with_hard_zero[remote]); |
| } |
| } |
| } |
| |
| test_unexpected_base(); |
| |
| if (have_fsgsbase) { |
| unsigned short ss; |
| |
| asm volatile ("mov %%ss, %0" : "=rm" (ss)); |
| |
| test_wrbase(0, 0); |
| test_wrbase(0, 1); |
| test_wrbase(0, 0x200000000); |
| test_wrbase(0, 0xffffffffffffffff); |
| test_wrbase(ss, 0); |
| test_wrbase(ss, 1); |
| test_wrbase(ss, 0x200000000); |
| test_wrbase(ss, 0xffffffffffffffff); |
| } |
| |
| ftx = 3; /* Kill the thread. */ |
| syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0); |
| |
| if (pthread_join(thread, NULL) != 0) |
| err(1, "pthread_join"); |
| |
| test_ptrace_write_gsbase(); |
| |
| return nerrs == 0 ? 0 : 1; |
| } |