| - compatible : should be "pwm-leds". |
| Each LED is represented as a sub-node of the pwm-leds device. Each |
| node's name represents the name of the corresponding LED. |
| - pwms : PWM property to point to the PWM device (phandle)/port (id) and to |
| specify the period time to be used: <&phandle id period_ns>; |
| - pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device |
| For the pwms and pwm-names property please refer to: |
| Documentation/devicetree/bindings/pwm/pwm.txt |
| - max-brightness : Maximum brightness possible for the LED |
| - active-low : (optional) For PWMs where the LED is wired to supply |
| see Documentation/devicetree/bindings/leds/common.txt |
| - linux,default-trigger : (optional) |
| see Documentation/devicetree/bindings/leds/common.txt |
| /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */ |
| compatible = "ti,twl6030-pwm"; |
| /* provides one PWM (id 0 for Charing indicator LED) */ |
| compatible = "ti,twl6030-pwmled"; |
| pwms = <&twl_pwm 0 7812500>; |
| label = "omap4:green:chrg"; |
| pwms = <&twl_pwmled 0 7812500>; |