| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Surface Book (2 and later) hot-plug driver. |
| * |
| * Surface Book devices (can) have a hot-pluggable discrete GPU (dGPU). This |
| * driver is responsible for out-of-band hot-plug event signaling on these |
| * devices. It is specifically required when the hot-plug device is in D3cold |
| * and can thus not generate PCIe hot-plug events itself. |
| * |
| * Event signaling is handled via ACPI, which will generate the appropriate |
| * device-check notifications to be picked up by the PCIe hot-plug driver. |
| * |
| * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com> |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/gpio.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_device.h> |
| |
| static const struct acpi_gpio_params shps_base_presence_int = { 0, 0, false }; |
| static const struct acpi_gpio_params shps_base_presence = { 1, 0, false }; |
| static const struct acpi_gpio_params shps_device_power_int = { 2, 0, false }; |
| static const struct acpi_gpio_params shps_device_power = { 3, 0, false }; |
| static const struct acpi_gpio_params shps_device_presence_int = { 4, 0, false }; |
| static const struct acpi_gpio_params shps_device_presence = { 5, 0, false }; |
| |
| static const struct acpi_gpio_mapping shps_acpi_gpios[] = { |
| { "base_presence-int-gpio", &shps_base_presence_int, 1 }, |
| { "base_presence-gpio", &shps_base_presence, 1 }, |
| { "device_power-int-gpio", &shps_device_power_int, 1 }, |
| { "device_power-gpio", &shps_device_power, 1 }, |
| { "device_presence-int-gpio", &shps_device_presence_int, 1 }, |
| { "device_presence-gpio", &shps_device_presence, 1 }, |
| { }, |
| }; |
| |
| /* 5515a847-ed55-4b27-8352-cd320e10360a */ |
| static const guid_t shps_dsm_guid = |
| GUID_INIT(0x5515a847, 0xed55, 0x4b27, 0x83, 0x52, 0xcd, 0x32, 0x0e, 0x10, 0x36, 0x0a); |
| |
| #define SHPS_DSM_REVISION 1 |
| |
| enum shps_dsm_fn { |
| SHPS_DSM_FN_PCI_NUM_ENTRIES = 0x01, |
| SHPS_DSM_FN_PCI_GET_ENTRIES = 0x02, |
| SHPS_DSM_FN_IRQ_BASE_PRESENCE = 0x03, |
| SHPS_DSM_FN_IRQ_DEVICE_POWER = 0x04, |
| SHPS_DSM_FN_IRQ_DEVICE_PRESENCE = 0x05, |
| }; |
| |
| enum shps_irq_type { |
| /* NOTE: Must be in order of enum shps_dsm_fn above. */ |
| SHPS_IRQ_TYPE_BASE_PRESENCE = 0, |
| SHPS_IRQ_TYPE_DEVICE_POWER = 1, |
| SHPS_IRQ_TYPE_DEVICE_PRESENCE = 2, |
| SHPS_NUM_IRQS, |
| }; |
| |
| static const char *const shps_gpio_names[] = { |
| [SHPS_IRQ_TYPE_BASE_PRESENCE] = "base_presence", |
| [SHPS_IRQ_TYPE_DEVICE_POWER] = "device_power", |
| [SHPS_IRQ_TYPE_DEVICE_PRESENCE] = "device_presence", |
| }; |
| |
| struct shps_device { |
| struct mutex lock[SHPS_NUM_IRQS]; /* Protects update in shps_dsm_notify_irq() */ |
| struct gpio_desc *gpio[SHPS_NUM_IRQS]; |
| unsigned int irq[SHPS_NUM_IRQS]; |
| }; |
| |
| #define SHPS_IRQ_NOT_PRESENT ((unsigned int)-1) |
| |
| static enum shps_dsm_fn shps_dsm_fn_for_irq(enum shps_irq_type type) |
| { |
| return SHPS_DSM_FN_IRQ_BASE_PRESENCE + type; |
| } |
| |
| static void shps_dsm_notify_irq(struct platform_device *pdev, enum shps_irq_type type) |
| { |
| struct shps_device *sdev = platform_get_drvdata(pdev); |
| acpi_handle handle = ACPI_HANDLE(&pdev->dev); |
| union acpi_object *result; |
| union acpi_object param; |
| int value; |
| |
| mutex_lock(&sdev->lock[type]); |
| |
| value = gpiod_get_value_cansleep(sdev->gpio[type]); |
| if (value < 0) { |
| mutex_unlock(&sdev->lock[type]); |
| dev_err(&pdev->dev, "failed to get gpio: %d (irq=%d)\n", type, value); |
| return; |
| } |
| |
| dev_dbg(&pdev->dev, "IRQ notification via DSM (irq=%d, value=%d)\n", type, value); |
| |
| param.type = ACPI_TYPE_INTEGER; |
| param.integer.value = value; |
| |
| result = acpi_evaluate_dsm(handle, &shps_dsm_guid, SHPS_DSM_REVISION, |
| shps_dsm_fn_for_irq(type), ¶m); |
| |
| if (!result) { |
| dev_err(&pdev->dev, "IRQ notification via DSM failed (irq=%d, gpio=%d)\n", |
| type, value); |
| |
| } else if (result->type != ACPI_TYPE_BUFFER) { |
| dev_err(&pdev->dev, |
| "IRQ notification via DSM failed: unexpected result type (irq=%d, gpio=%d)\n", |
| type, value); |
| |
| } else if (result->buffer.length != 1 || result->buffer.pointer[0] != 0) { |
| dev_err(&pdev->dev, |
| "IRQ notification via DSM failed: unexpected result value (irq=%d, gpio=%d)\n", |
| type, value); |
| } |
| |
| mutex_unlock(&sdev->lock[type]); |
| |
| if (result) |
| ACPI_FREE(result); |
| } |
| |
| static irqreturn_t shps_handle_irq(int irq, void *data) |
| { |
| struct platform_device *pdev = data; |
| struct shps_device *sdev = platform_get_drvdata(pdev); |
| int type; |
| |
| /* Figure out which IRQ we're handling. */ |
| for (type = 0; type < SHPS_NUM_IRQS; type++) |
| if (irq == sdev->irq[type]) |
| break; |
| |
| /* We should have found our interrupt, if not: this is a bug. */ |
| if (WARN(type >= SHPS_NUM_IRQS, "invalid IRQ number: %d\n", irq)) |
| return IRQ_HANDLED; |
| |
| /* Forward interrupt to ACPI via DSM. */ |
| shps_dsm_notify_irq(pdev, type); |
| return IRQ_HANDLED; |
| } |
| |
| static int shps_setup_irq(struct platform_device *pdev, enum shps_irq_type type) |
| { |
| unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING; |
| struct shps_device *sdev = platform_get_drvdata(pdev); |
| struct gpio_desc *gpiod; |
| acpi_handle handle = ACPI_HANDLE(&pdev->dev); |
| const char *irq_name; |
| const int dsm = shps_dsm_fn_for_irq(type); |
| int status, irq; |
| |
| /* |
| * Only set up interrupts that we actually need: The Surface Book 3 |
| * does not have a DSM for base presence, so don't set up an interrupt |
| * for that. |
| */ |
| if (!acpi_check_dsm(handle, &shps_dsm_guid, SHPS_DSM_REVISION, BIT(dsm))) { |
| dev_dbg(&pdev->dev, "IRQ notification via DSM not present (irq=%d)\n", type); |
| return 0; |
| } |
| |
| gpiod = devm_gpiod_get(&pdev->dev, shps_gpio_names[type], GPIOD_ASIS); |
| if (IS_ERR(gpiod)) |
| return PTR_ERR(gpiod); |
| |
| irq = gpiod_to_irq(gpiod); |
| if (irq < 0) |
| return irq; |
| |
| irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "shps-irq-%d", type); |
| if (!irq_name) |
| return -ENOMEM; |
| |
| status = devm_request_threaded_irq(&pdev->dev, irq, NULL, shps_handle_irq, |
| flags, irq_name, pdev); |
| if (status) |
| return status; |
| |
| dev_dbg(&pdev->dev, "set up irq %d as type %d\n", irq, type); |
| |
| sdev->gpio[type] = gpiod; |
| sdev->irq[type] = irq; |
| |
| return 0; |
| } |
| |
| static int surface_hotplug_remove(struct platform_device *pdev) |
| { |
| struct shps_device *sdev = platform_get_drvdata(pdev); |
| int i; |
| |
| /* Ensure that IRQs have been fully handled and won't trigger any more. */ |
| for (i = 0; i < SHPS_NUM_IRQS; i++) { |
| if (sdev->irq[i] != SHPS_IRQ_NOT_PRESENT) |
| disable_irq(sdev->irq[i]); |
| |
| mutex_destroy(&sdev->lock[i]); |
| } |
| |
| return 0; |
| } |
| |
| static int surface_hotplug_probe(struct platform_device *pdev) |
| { |
| struct shps_device *sdev; |
| int status, i; |
| |
| /* |
| * The MSHW0153 device is also present on the Surface Laptop 3, |
| * however that doesn't have a hot-pluggable PCIe device. It also |
| * doesn't have any GPIO interrupts/pins under the MSHW0153, so filter |
| * it out here. |
| */ |
| if (gpiod_count(&pdev->dev, NULL) < 0) |
| return -ENODEV; |
| |
| status = devm_acpi_dev_add_driver_gpios(&pdev->dev, shps_acpi_gpios); |
| if (status) |
| return status; |
| |
| sdev = devm_kzalloc(&pdev->dev, sizeof(*sdev), GFP_KERNEL); |
| if (!sdev) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, sdev); |
| |
| /* |
| * Initialize IRQs so that we can safely call surface_hotplug_remove() |
| * on errors. |
| */ |
| for (i = 0; i < SHPS_NUM_IRQS; i++) |
| sdev->irq[i] = SHPS_IRQ_NOT_PRESENT; |
| |
| /* Set up IRQs. */ |
| for (i = 0; i < SHPS_NUM_IRQS; i++) { |
| mutex_init(&sdev->lock[i]); |
| |
| status = shps_setup_irq(pdev, i); |
| if (status) { |
| dev_err(&pdev->dev, "failed to set up IRQ %d: %d\n", i, status); |
| goto err; |
| } |
| } |
| |
| /* Ensure everything is up-to-date. */ |
| for (i = 0; i < SHPS_NUM_IRQS; i++) |
| if (sdev->irq[i] != SHPS_IRQ_NOT_PRESENT) |
| shps_dsm_notify_irq(pdev, i); |
| |
| return 0; |
| |
| err: |
| surface_hotplug_remove(pdev); |
| return status; |
| } |
| |
| static const struct acpi_device_id surface_hotplug_acpi_match[] = { |
| { "MSHW0153", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, surface_hotplug_acpi_match); |
| |
| static struct platform_driver surface_hotplug_driver = { |
| .probe = surface_hotplug_probe, |
| .remove = surface_hotplug_remove, |
| .driver = { |
| .name = "surface_hotplug", |
| .acpi_match_table = surface_hotplug_acpi_match, |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| }; |
| module_platform_driver(surface_hotplug_driver); |
| |
| MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>"); |
| MODULE_DESCRIPTION("Surface Hot-Plug Signaling Driver for Surface Book Devices"); |
| MODULE_LICENSE("GPL"); |