| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (C) 2019-2020 Linaro Limited */ |
| |
| #include <linux/acpi.h> |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <asm/unaligned.h> |
| |
| #include "xhci.h" |
| #include "xhci-trace.h" |
| #include "xhci-pci.h" |
| |
| #define RENESAS_FW_VERSION 0x6C |
| #define RENESAS_ROM_CONFIG 0xF0 |
| #define RENESAS_FW_STATUS 0xF4 |
| #define RENESAS_FW_STATUS_MSB 0xF5 |
| #define RENESAS_ROM_STATUS 0xF6 |
| #define RENESAS_ROM_STATUS_MSB 0xF7 |
| #define RENESAS_DATA0 0xF8 |
| #define RENESAS_DATA1 0xFC |
| |
| #define RENESAS_FW_VERSION_FIELD GENMASK(23, 7) |
| #define RENESAS_FW_VERSION_OFFSET 8 |
| |
| #define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0) |
| #define RENESAS_FW_STATUS_LOCK BIT(1) |
| #define RENESAS_FW_STATUS_RESULT GENMASK(6, 4) |
| #define RENESAS_FW_STATUS_INVALID 0 |
| #define RENESAS_FW_STATUS_SUCCESS BIT(4) |
| #define RENESAS_FW_STATUS_ERROR BIT(5) |
| #define RENESAS_FW_STATUS_SET_DATA0 BIT(8) |
| #define RENESAS_FW_STATUS_SET_DATA1 BIT(9) |
| |
| #define RENESAS_ROM_STATUS_ACCESS BIT(0) |
| #define RENESAS_ROM_STATUS_ERASE BIT(1) |
| #define RENESAS_ROM_STATUS_RELOAD BIT(2) |
| #define RENESAS_ROM_STATUS_RESULT GENMASK(6, 4) |
| #define RENESAS_ROM_STATUS_NO_RESULT 0 |
| #define RENESAS_ROM_STATUS_SUCCESS BIT(4) |
| #define RENESAS_ROM_STATUS_ERROR BIT(5) |
| #define RENESAS_ROM_STATUS_SET_DATA0 BIT(8) |
| #define RENESAS_ROM_STATUS_SET_DATA1 BIT(9) |
| #define RENESAS_ROM_STATUS_ROM_EXISTS BIT(15) |
| |
| #define RENESAS_ROM_ERASE_MAGIC 0x5A65726F |
| #define RENESAS_ROM_WRITE_MAGIC 0x53524F4D |
| |
| #define RENESAS_RETRY 10000 |
| #define RENESAS_DELAY 10 |
| |
| static int renesas_fw_download_image(struct pci_dev *dev, |
| const u32 *fw, size_t step, bool rom) |
| { |
| size_t i; |
| int err; |
| u8 fw_status; |
| bool data0_or_data1; |
| u32 status_reg; |
| |
| if (rom) |
| status_reg = RENESAS_ROM_STATUS_MSB; |
| else |
| status_reg = RENESAS_FW_STATUS_MSB; |
| |
| /* |
| * The hardware does alternate between two 32-bit pages. |
| * (This is because each row of the firmware is 8 bytes). |
| * |
| * for even steps we use DATA0, for odd steps DATA1. |
| */ |
| data0_or_data1 = (step & 1) == 1; |
| |
| /* step+1. Read "Set DATAX" and confirm it is cleared. */ |
| for (i = 0; i < RENESAS_RETRY; i++) { |
| err = pci_read_config_byte(dev, status_reg, &fw_status); |
| if (err) { |
| dev_err(&dev->dev, "Read Status failed: %d\n", |
| pcibios_err_to_errno(err)); |
| return pcibios_err_to_errno(err); |
| } |
| if (!(fw_status & BIT(data0_or_data1))) |
| break; |
| |
| udelay(RENESAS_DELAY); |
| } |
| if (i == RENESAS_RETRY) { |
| dev_err(&dev->dev, "Timeout for Set DATAX step: %zd\n", step); |
| return -ETIMEDOUT; |
| } |
| |
| /* |
| * step+2. Write FW data to "DATAX". |
| * "LSB is left" => force little endian |
| */ |
| err = pci_write_config_dword(dev, data0_or_data1 ? |
| RENESAS_DATA1 : RENESAS_DATA0, |
| (__force u32)cpu_to_le32(fw[step])); |
| if (err) { |
| dev_err(&dev->dev, "Write to DATAX failed: %d\n", |
| pcibios_err_to_errno(err)); |
| return pcibios_err_to_errno(err); |
| } |
| |
| udelay(100); |
| |
| /* step+3. Set "Set DATAX". */ |
| err = pci_write_config_byte(dev, status_reg, BIT(data0_or_data1)); |
| if (err) { |
| dev_err(&dev->dev, "Write config for DATAX failed: %d\n", |
| pcibios_err_to_errno(err)); |
| return pcibios_err_to_errno(err); |
| } |
| |
| return 0; |
| } |
| |
| static int renesas_fw_verify(const void *fw_data, |
| size_t length) |
| { |
| u16 fw_version_pointer; |
| u16 fw_version; |
| |
| /* |
| * The Firmware's Data Format is describe in |
| * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124 |
| */ |
| |
| /* |
| * The bootrom chips of the big brother have sizes up to 64k, let's |
| * assume that's the biggest the firmware can get. |
| */ |
| if (length < 0x1000 || length >= 0x10000) { |
| pr_err("firmware is size %zd is not (4k - 64k).", |
| length); |
| return -EINVAL; |
| } |
| |
| /* The First 2 bytes are fixed value (55aa). "LSB on Left" */ |
| if (get_unaligned_le16(fw_data) != 0x55aa) { |
| pr_err("no valid firmware header found."); |
| return -EINVAL; |
| } |
| |
| /* verify the firmware version position and print it. */ |
| fw_version_pointer = get_unaligned_le16(fw_data + 4); |
| if (fw_version_pointer + 2 >= length) { |
| pr_err("fw ver pointer is outside of the firmware image"); |
| return -EINVAL; |
| } |
| |
| fw_version = get_unaligned_le16(fw_data + fw_version_pointer); |
| pr_err("got firmware version: %02x.", fw_version); |
| |
| return 0; |
| } |
| |
| static bool renesas_check_rom(struct pci_dev *pdev) |
| { |
| u16 rom_status; |
| int retval; |
| |
| /* Check if external ROM exists */ |
| retval = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_status); |
| if (retval) |
| return false; |
| |
| rom_status &= RENESAS_ROM_STATUS_ROM_EXISTS; |
| if (rom_status) { |
| dev_dbg(&pdev->dev, "External ROM exists\n"); |
| return true; /* External ROM exists */ |
| } |
| |
| return false; |
| } |
| |
| static int renesas_check_rom_state(struct pci_dev *pdev) |
| { |
| u16 rom_state; |
| u32 version; |
| int err; |
| |
| /* check FW version */ |
| err = pci_read_config_dword(pdev, RENESAS_FW_VERSION, &version); |
| if (err) |
| return pcibios_err_to_errno(err); |
| |
| version &= RENESAS_FW_VERSION_FIELD; |
| version = version >> RENESAS_FW_VERSION_OFFSET; |
| dev_dbg(&pdev->dev, "Found ROM version: %x\n", version); |
| |
| /* |
| * Test if ROM is present and loaded, if so we can skip everything |
| */ |
| err = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_state); |
| if (err) |
| return pcibios_err_to_errno(err); |
| |
| if (rom_state & RENESAS_ROM_STATUS_ROM_EXISTS) { |
| /* ROM exists */ |
| dev_dbg(&pdev->dev, "ROM exists\n"); |
| |
| /* Check the "Result Code" Bits (6:4) and act accordingly */ |
| switch (rom_state & RENESAS_ROM_STATUS_RESULT) { |
| case RENESAS_ROM_STATUS_SUCCESS: |
| return 0; |
| |
| case RENESAS_ROM_STATUS_NO_RESULT: /* No result yet */ |
| return 0; |
| |
| case RENESAS_ROM_STATUS_ERROR: /* Error State */ |
| default: /* All other states are marked as "Reserved states" */ |
| dev_err(&pdev->dev, "Invalid ROM.."); |
| break; |
| } |
| } |
| |
| return -EIO; |
| } |
| |
| static int renesas_fw_check_running(struct pci_dev *pdev) |
| { |
| u8 fw_state; |
| int err; |
| |
| /* Check if device has ROM and loaded, if so skip everything */ |
| err = renesas_check_rom(pdev); |
| if (err) { /* we have rom */ |
| err = renesas_check_rom_state(pdev); |
| if (!err) |
| return err; |
| } |
| |
| /* |
| * Test if the device is actually needing the firmware. As most |
| * BIOSes will initialize the device for us. If the device is |
| * initialized. |
| */ |
| err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state); |
| if (err) |
| return pcibios_err_to_errno(err); |
| |
| /* |
| * Check if "FW Download Lock" is locked. If it is and the FW is |
| * ready we can simply continue. If the FW is not ready, we have |
| * to give up. |
| */ |
| if (fw_state & RENESAS_FW_STATUS_LOCK) { |
| dev_dbg(&pdev->dev, "FW Download Lock is engaged."); |
| |
| if (fw_state & RENESAS_FW_STATUS_SUCCESS) |
| return 0; |
| |
| dev_err(&pdev->dev, |
| "FW Download Lock is set and FW is not ready. Giving Up."); |
| return -EIO; |
| } |
| |
| /* |
| * Check if "FW Download Enable" is set. If someone (us?) tampered |
| * with it and it can't be reset, we have to give up too... and |
| * ask for a forgiveness and a reboot. |
| */ |
| if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) { |
| dev_err(&pdev->dev, |
| "FW Download Enable is stale. Giving Up (poweroff/reboot needed)."); |
| return -EIO; |
| } |
| |
| /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */ |
| switch (fw_state & RENESAS_FW_STATUS_RESULT) { |
| case 0: /* No result yet */ |
| dev_dbg(&pdev->dev, "FW is not ready/loaded yet."); |
| |
| /* tell the caller, that this device needs the firmware. */ |
| return 1; |
| |
| case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */ |
| dev_dbg(&pdev->dev, "FW is ready."); |
| return 0; |
| |
| case RENESAS_FW_STATUS_ERROR: /* Error State */ |
| dev_err(&pdev->dev, |
| "hardware is in an error state. Giving up (poweroff/reboot needed)."); |
| return -ENODEV; |
| |
| default: /* All other states are marked as "Reserved states" */ |
| dev_err(&pdev->dev, |
| "hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).", |
| (fw_state & RENESAS_FW_STATUS_RESULT) >> 4); |
| return -EINVAL; |
| } |
| } |
| |
| static int renesas_fw_download(struct pci_dev *pdev, |
| const struct firmware *fw) |
| { |
| const u32 *fw_data = (const u32 *)fw->data; |
| size_t i; |
| int err; |
| u8 fw_status; |
| |
| /* |
| * For more information and the big picture: please look at the |
| * "Firmware Download Sequence" in "7.1 FW Download Interface" |
| * of R19UH0078EJ0500 Rev.5.00 page 131 |
| */ |
| |
| /* |
| * 0. Set "FW Download Enable" bit in the |
| * "FW Download Control & Status Register" at 0xF4 |
| */ |
| err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, |
| RENESAS_FW_STATUS_DOWNLOAD_ENABLE); |
| if (err) |
| return pcibios_err_to_errno(err); |
| |
| /* 1 - 10 follow one step after the other. */ |
| for (i = 0; i < fw->size / 4; i++) { |
| err = renesas_fw_download_image(pdev, fw_data, i, false); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Firmware Download Step %zd failed at position %zd bytes with (%d).", |
| i, i * 4, err); |
| return err; |
| } |
| } |
| |
| /* |
| * This sequence continues until the last data is written to |
| * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1" |
| * is cleared by the hardware beforehand. |
| */ |
| for (i = 0; i < RENESAS_RETRY; i++) { |
| err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB, |
| &fw_status); |
| if (err) |
| return pcibios_err_to_errno(err); |
| if (!(fw_status & (BIT(0) | BIT(1)))) |
| break; |
| |
| udelay(RENESAS_DELAY); |
| } |
| if (i == RENESAS_RETRY) |
| dev_warn(&pdev->dev, "Final Firmware Download step timed out."); |
| |
| /* |
| * 11. After finishing writing the last data of FW, the |
| * System Software must clear "FW Download Enable" |
| */ |
| err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0); |
| if (err) |
| return pcibios_err_to_errno(err); |
| |
| /* 12. Read "Result Code" and confirm it is good. */ |
| for (i = 0; i < RENESAS_RETRY; i++) { |
| err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status); |
| if (err) |
| return pcibios_err_to_errno(err); |
| if (fw_status & RENESAS_FW_STATUS_SUCCESS) |
| break; |
| |
| udelay(RENESAS_DELAY); |
| } |
| if (i == RENESAS_RETRY) { |
| /* Timed out / Error - let's see if we can fix this */ |
| err = renesas_fw_check_running(pdev); |
| switch (err) { |
| case 0: /* |
| * we shouldn't end up here. |
| * maybe it took a little bit longer. |
| * But all should be well? |
| */ |
| break; |
| |
| case 1: /* (No result yet! */ |
| dev_err(&pdev->dev, "FW Load timedout"); |
| return -ETIMEDOUT; |
| |
| default: |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void renesas_rom_erase(struct pci_dev *pdev) |
| { |
| int retval, i; |
| u8 status; |
| |
| dev_dbg(&pdev->dev, "Performing ROM Erase...\n"); |
| retval = pci_write_config_dword(pdev, RENESAS_DATA0, |
| RENESAS_ROM_ERASE_MAGIC); |
| if (retval) { |
| dev_err(&pdev->dev, "ROM erase, magic word write failed: %d\n", |
| pcibios_err_to_errno(retval)); |
| return; |
| } |
| |
| retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); |
| if (retval) { |
| dev_err(&pdev->dev, "ROM status read failed: %d\n", |
| pcibios_err_to_errno(retval)); |
| return; |
| } |
| status |= RENESAS_ROM_STATUS_ERASE; |
| retval = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, status); |
| if (retval) { |
| dev_err(&pdev->dev, "ROM erase set word write failed\n"); |
| return; |
| } |
| |
| /* sleep a bit while ROM is erased */ |
| msleep(20); |
| |
| for (i = 0; i < RENESAS_RETRY; i++) { |
| retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, |
| &status); |
| status &= RENESAS_ROM_STATUS_ERASE; |
| if (!status) |
| break; |
| |
| mdelay(RENESAS_DELAY); |
| } |
| |
| if (i == RENESAS_RETRY) |
| dev_dbg(&pdev->dev, "Chip erase timedout: %x\n", status); |
| |
| dev_dbg(&pdev->dev, "ROM Erase... Done success\n"); |
| } |
| |
| static bool renesas_setup_rom(struct pci_dev *pdev, const struct firmware *fw) |
| { |
| const u32 *fw_data = (const u32 *)fw->data; |
| int err, i; |
| u8 status; |
| |
| /* 2. Write magic word to Data0 */ |
| err = pci_write_config_dword(pdev, RENESAS_DATA0, |
| RENESAS_ROM_WRITE_MAGIC); |
| if (err) |
| return false; |
| |
| /* 3. Set External ROM access */ |
| err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, |
| RENESAS_ROM_STATUS_ACCESS); |
| if (err) |
| goto remove_bypass; |
| |
| /* 4. Check the result */ |
| err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); |
| if (err) |
| goto remove_bypass; |
| status &= GENMASK(6, 4); |
| if (status) { |
| dev_err(&pdev->dev, |
| "setting external rom failed: %x\n", status); |
| goto remove_bypass; |
| } |
| |
| /* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */ |
| for (i = 0; i < fw->size / 4; i++) { |
| err = renesas_fw_download_image(pdev, fw_data, i, true); |
| if (err) { |
| dev_err(&pdev->dev, |
| "ROM Download Step %d failed at position %d bytes with (%d)\n", |
| i, i * 4, err); |
| goto remove_bypass; |
| } |
| } |
| |
| /* |
| * wait till DATA0/1 is cleared |
| */ |
| for (i = 0; i < RENESAS_RETRY; i++) { |
| err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB, |
| &status); |
| if (err) |
| goto remove_bypass; |
| if (!(status & (BIT(0) | BIT(1)))) |
| break; |
| |
| udelay(RENESAS_DELAY); |
| } |
| if (i == RENESAS_RETRY) { |
| dev_err(&pdev->dev, "Final Firmware ROM Download step timed out\n"); |
| goto remove_bypass; |
| } |
| |
| /* 17. Remove bypass */ |
| err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0); |
| if (err) |
| return false; |
| |
| udelay(10); |
| |
| /* 18. check result */ |
| for (i = 0; i < RENESAS_RETRY; i++) { |
| err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); |
| if (err) { |
| dev_err(&pdev->dev, "Read ROM status failed:%d\n", |
| pcibios_err_to_errno(err)); |
| return false; |
| } |
| status &= RENESAS_ROM_STATUS_RESULT; |
| if (status == RENESAS_ROM_STATUS_SUCCESS) { |
| dev_dbg(&pdev->dev, "Download ROM success\n"); |
| break; |
| } |
| udelay(RENESAS_DELAY); |
| } |
| if (i == RENESAS_RETRY) { /* Timed out */ |
| dev_err(&pdev->dev, |
| "Download to external ROM TO: %x\n", status); |
| return false; |
| } |
| |
| dev_dbg(&pdev->dev, "Download to external ROM succeeded\n"); |
| |
| /* Last step set Reload */ |
| err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, |
| RENESAS_ROM_STATUS_RELOAD); |
| if (err) { |
| dev_err(&pdev->dev, "Set ROM execute failed: %d\n", |
| pcibios_err_to_errno(err)); |
| return false; |
| } |
| |
| /* |
| * wait till Reload is cleared |
| */ |
| for (i = 0; i < RENESAS_RETRY; i++) { |
| err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status); |
| if (err) |
| return false; |
| if (!(status & RENESAS_ROM_STATUS_RELOAD)) |
| break; |
| |
| udelay(RENESAS_DELAY); |
| } |
| if (i == RENESAS_RETRY) { |
| dev_err(&pdev->dev, "ROM Exec timed out: %x\n", status); |
| return false; |
| } |
| |
| return true; |
| |
| remove_bypass: |
| pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0); |
| return false; |
| } |
| |
| static int renesas_load_fw(struct pci_dev *pdev, const struct firmware *fw) |
| { |
| int err = 0; |
| bool rom; |
| |
| /* Check if the device has external ROM */ |
| rom = renesas_check_rom(pdev); |
| if (rom) { |
| /* perform chip erase first */ |
| renesas_rom_erase(pdev); |
| |
| /* lets try loading fw on ROM first */ |
| rom = renesas_setup_rom(pdev, fw); |
| if (!rom) { |
| dev_dbg(&pdev->dev, |
| "ROM load failed, falling back on FW load\n"); |
| } else { |
| dev_dbg(&pdev->dev, |
| "ROM load success\n"); |
| goto exit; |
| } |
| } |
| |
| err = renesas_fw_download(pdev, fw); |
| |
| exit: |
| if (err) |
| dev_err(&pdev->dev, "firmware failed to download (%d).", err); |
| return err; |
| } |
| |
| int renesas_xhci_check_request_fw(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct xhci_driver_data *driver_data = |
| (struct xhci_driver_data *)id->driver_data; |
| const char *fw_name = driver_data->firmware; |
| const struct firmware *fw; |
| int err; |
| |
| err = renesas_fw_check_running(pdev); |
| /* Continue ahead, if the firmware is already running. */ |
| if (err == 0) |
| return 0; |
| |
| if (err != 1) |
| return err; |
| |
| pci_dev_get(pdev); |
| err = request_firmware(&fw, fw_name, &pdev->dev); |
| pci_dev_put(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "request_firmware failed: %d\n", err); |
| return err; |
| } |
| |
| err = renesas_fw_verify(fw->data, fw->size); |
| if (err) |
| goto exit; |
| |
| err = renesas_load_fw(pdev, fw); |
| exit: |
| release_firmware(fw); |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(renesas_xhci_check_request_fw); |
| |
| void renesas_xhci_pci_exit(struct pci_dev *dev) |
| { |
| } |
| EXPORT_SYMBOL_GPL(renesas_xhci_pci_exit); |
| |
| MODULE_LICENSE("GPL v2"); |