| /* |
| * The CE4100's I2C device is more or less the same one as found on PXA. |
| * It does not support slave mode, the register slightly moved. This PCI |
| * device provides three bars, every contains a single I2C controller. |
| */ |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c/pxa-i2c.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_address.h> |
| |
| #define CE4100_PCI_I2C_DEVS 3 |
| |
| struct ce4100_devices { |
| struct platform_device *pdev[CE4100_PCI_I2C_DEVS]; |
| }; |
| |
| static struct platform_device *add_i2c_device(struct pci_dev *dev, int bar) |
| { |
| struct platform_device *pdev; |
| struct i2c_pxa_platform_data pdata; |
| struct resource res[2]; |
| struct device_node *child; |
| static int devnum; |
| int ret; |
| |
| memset(&pdata, 0, sizeof(struct i2c_pxa_platform_data)); |
| memset(&res, 0, sizeof(res)); |
| |
| res[0].flags = IORESOURCE_MEM; |
| res[0].start = pci_resource_start(dev, bar); |
| res[0].end = pci_resource_end(dev, bar); |
| |
| res[1].flags = IORESOURCE_IRQ; |
| res[1].start = dev->irq; |
| res[1].end = dev->irq; |
| |
| for_each_child_of_node(dev->dev.of_node, child) { |
| const void *prop; |
| struct resource r; |
| int ret; |
| |
| ret = of_address_to_resource(child, 0, &r); |
| if (ret < 0) |
| continue; |
| if (r.start != res[0].start) |
| continue; |
| if (r.end != res[0].end) |
| continue; |
| if (r.flags != res[0].flags) |
| continue; |
| |
| prop = of_get_property(child, "fast-mode", NULL); |
| if (prop) |
| pdata.fast_mode = 1; |
| |
| break; |
| } |
| |
| if (!child) { |
| dev_err(&dev->dev, "failed to match a DT node for bar %d.\n", |
| bar); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| pdev = platform_device_alloc("ce4100-i2c", devnum); |
| if (!pdev) { |
| of_node_put(child); |
| ret = -ENOMEM; |
| goto out; |
| } |
| pdev->dev.parent = &dev->dev; |
| pdev->dev.of_node = child; |
| |
| ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); |
| if (ret) |
| goto err; |
| |
| ret = platform_device_add_data(pdev, &pdata, sizeof(pdata)); |
| if (ret) |
| goto err; |
| |
| ret = platform_device_add(pdev); |
| if (ret) |
| goto err; |
| devnum++; |
| return pdev; |
| err: |
| platform_device_put(pdev); |
| out: |
| return ERR_PTR(ret); |
| } |
| |
| static int __devinit ce4100_i2c_probe(struct pci_dev *dev, |
| const struct pci_device_id *ent) |
| { |
| int ret; |
| int i; |
| struct ce4100_devices *sds; |
| |
| ret = pci_enable_device_mem(dev); |
| if (ret) |
| return ret; |
| |
| if (!dev->dev.of_node) { |
| dev_err(&dev->dev, "Missing device tree node.\n"); |
| return -EINVAL; |
| } |
| sds = kzalloc(sizeof(*sds), GFP_KERNEL); |
| if (!sds) { |
| ret = -ENOMEM; |
| goto err_mem; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) { |
| sds->pdev[i] = add_i2c_device(dev, i); |
| if (IS_ERR(sds->pdev[i])) { |
| ret = PTR_ERR(sds->pdev[i]); |
| while (--i >= 0) |
| platform_device_unregister(sds->pdev[i]); |
| goto err_dev_add; |
| } |
| } |
| pci_set_drvdata(dev, sds); |
| return 0; |
| |
| err_dev_add: |
| pci_set_drvdata(dev, NULL); |
| kfree(sds); |
| err_mem: |
| pci_disable_device(dev); |
| return ret; |
| } |
| |
| static void __devexit ce4100_i2c_remove(struct pci_dev *dev) |
| { |
| struct ce4100_devices *sds; |
| unsigned int i; |
| |
| sds = pci_get_drvdata(dev); |
| pci_set_drvdata(dev, NULL); |
| |
| for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) |
| platform_device_unregister(sds->pdev[i]); |
| |
| pci_disable_device(dev); |
| kfree(sds); |
| } |
| |
| static struct pci_device_id ce4100_i2c_devices[] __devinitdata = { |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)}, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(pci, ce4100_i2c_devices); |
| |
| static struct pci_driver ce4100_i2c_driver = { |
| .name = "ce4100_i2c", |
| .id_table = ce4100_i2c_devices, |
| .probe = ce4100_i2c_probe, |
| .remove = __devexit_p(ce4100_i2c_remove), |
| }; |
| |
| static int __init ce4100_i2c_init(void) |
| { |
| return pci_register_driver(&ce4100_i2c_driver); |
| } |
| module_init(ce4100_i2c_init); |
| |
| static void __exit ce4100_i2c_exit(void) |
| { |
| pci_unregister_driver(&ce4100_i2c_driver); |
| } |
| module_exit(ce4100_i2c_exit); |
| |
| MODULE_DESCRIPTION("CE4100 PCI-I2C glue code for PXA's driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); |