| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2013 Oskar Andero <oskar.andero@gmail.com> |
| * Copyright (C) 2014 Rose Technology |
| * Allan Bendorff Jensen <abj@rosetechnology.dk> |
| * Soren Andersen <san@rosetechnology.dk> |
| * |
| * Driver for following ADC chips from Microchip Technology's: |
| * 10 Bit converter |
| * MCP3001 |
| * MCP3002 |
| * MCP3004 |
| * MCP3008 |
| * ------------ |
| * 12 bit converter |
| * MCP3201 |
| * MCP3202 |
| * MCP3204 |
| * MCP3208 |
| * ------------ |
| * 13 bit converter |
| * MCP3301 |
| * ------------ |
| * 22 bit converter |
| * MCP3550 |
| * MCP3551 |
| * MCP3553 |
| * |
| * Datasheet can be found here: |
| * http://ww1.microchip.com/downloads/en/DeviceDoc/21293C.pdf mcp3001 |
| * http://ww1.microchip.com/downloads/en/DeviceDoc/21294E.pdf mcp3002 |
| * http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf mcp3004/08 |
| * http://ww1.microchip.com/downloads/en/DeviceDoc/21290D.pdf mcp3201 |
| * http://ww1.microchip.com/downloads/en/DeviceDoc/21034D.pdf mcp3202 |
| * http://ww1.microchip.com/downloads/en/DeviceDoc/21298c.pdf mcp3204/08 |
| * http://ww1.microchip.com/downloads/en/DeviceDoc/21700E.pdf mcp3301 |
| * http://ww1.microchip.com/downloads/en/DeviceDoc/21950D.pdf mcp3550/1/3 |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/spi/spi.h> |
| #include <linux/module.h> |
| #include <linux/iio/iio.h> |
| #include <linux/regulator/consumer.h> |
| |
| enum { |
| mcp3001, |
| mcp3002, |
| mcp3004, |
| mcp3008, |
| mcp3201, |
| mcp3202, |
| mcp3204, |
| mcp3208, |
| mcp3301, |
| mcp3550_50, |
| mcp3550_60, |
| mcp3551, |
| mcp3553, |
| }; |
| |
| struct mcp320x_chip_info { |
| const struct iio_chan_spec *channels; |
| unsigned int num_channels; |
| unsigned int resolution; |
| unsigned int conv_time; /* usec */ |
| }; |
| |
| /** |
| * struct mcp320x - Microchip SPI ADC instance |
| * @spi: SPI slave (parent of the IIO device) |
| * @msg: SPI message to select a channel and receive a value from the ADC |
| * @transfer: SPI transfers used by @msg |
| * @start_conv_msg: SPI message to start a conversion by briefly asserting CS |
| * @start_conv_transfer: SPI transfer used by @start_conv_msg |
| * @reg: regulator generating Vref |
| * @lock: protects read sequences |
| * @chip_info: ADC properties |
| * @tx_buf: buffer for @transfer[0] (not used on single-channel converters) |
| * @rx_buf: buffer for @transfer[1] |
| */ |
| struct mcp320x { |
| struct spi_device *spi; |
| struct spi_message msg; |
| struct spi_transfer transfer[2]; |
| struct spi_message start_conv_msg; |
| struct spi_transfer start_conv_transfer; |
| |
| struct regulator *reg; |
| struct mutex lock; |
| const struct mcp320x_chip_info *chip_info; |
| |
| u8 tx_buf ____cacheline_aligned; |
| u8 rx_buf[4]; |
| }; |
| |
| static int mcp320x_channel_to_tx_data(int device_index, |
| const unsigned int channel, bool differential) |
| { |
| int start_bit = 1; |
| |
| switch (device_index) { |
| case mcp3002: |
| case mcp3202: |
| return ((start_bit << 4) | (!differential << 3) | |
| (channel << 2)); |
| case mcp3004: |
| case mcp3204: |
| case mcp3008: |
| case mcp3208: |
| return ((start_bit << 6) | (!differential << 5) | |
| (channel << 2)); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mcp320x_adc_conversion(struct mcp320x *adc, u8 channel, |
| bool differential, int device_index, int *val) |
| { |
| int ret; |
| |
| if (adc->chip_info->conv_time) { |
| ret = spi_sync(adc->spi, &adc->start_conv_msg); |
| if (ret < 0) |
| return ret; |
| |
| usleep_range(adc->chip_info->conv_time, |
| adc->chip_info->conv_time + 100); |
| } |
| |
| memset(&adc->rx_buf, 0, sizeof(adc->rx_buf)); |
| if (adc->chip_info->num_channels > 1) |
| adc->tx_buf = mcp320x_channel_to_tx_data(device_index, channel, |
| differential); |
| |
| ret = spi_sync(adc->spi, &adc->msg); |
| if (ret < 0) |
| return ret; |
| |
| switch (device_index) { |
| case mcp3001: |
| *val = (adc->rx_buf[0] << 5 | adc->rx_buf[1] >> 3); |
| return 0; |
| case mcp3002: |
| case mcp3004: |
| case mcp3008: |
| *val = (adc->rx_buf[0] << 2 | adc->rx_buf[1] >> 6); |
| return 0; |
| case mcp3201: |
| *val = (adc->rx_buf[0] << 7 | adc->rx_buf[1] >> 1); |
| return 0; |
| case mcp3202: |
| case mcp3204: |
| case mcp3208: |
| *val = (adc->rx_buf[0] << 4 | adc->rx_buf[1] >> 4); |
| return 0; |
| case mcp3301: |
| *val = sign_extend32((adc->rx_buf[0] & 0x1f) << 8 |
| | adc->rx_buf[1], 12); |
| return 0; |
| case mcp3550_50: |
| case mcp3550_60: |
| case mcp3551: |
| case mcp3553: { |
| u32 raw = be32_to_cpup((__be32 *)adc->rx_buf); |
| |
| if (!(adc->spi->mode & SPI_CPOL)) |
| raw <<= 1; /* strip Data Ready bit in SPI mode 0,0 */ |
| |
| /* |
| * If the input is within -vref and vref, bit 21 is the sign. |
| * Up to 12% overrange or underrange are allowed, in which case |
| * bit 23 is the sign and bit 0 to 21 is the value. |
| */ |
| raw >>= 8; |
| if (raw & BIT(22) && raw & BIT(23)) |
| return -EIO; /* cannot have overrange AND underrange */ |
| else if (raw & BIT(22)) |
| raw &= ~BIT(22); /* overrange */ |
| else if (raw & BIT(23) || raw & BIT(21)) |
| raw |= GENMASK(31, 22); /* underrange or negative */ |
| |
| *val = (s32)raw; |
| return 0; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mcp320x_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *channel, int *val, |
| int *val2, long mask) |
| { |
| struct mcp320x *adc = iio_priv(indio_dev); |
| int ret = -EINVAL; |
| int device_index = 0; |
| |
| mutex_lock(&adc->lock); |
| |
| device_index = spi_get_device_id(adc->spi)->driver_data; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = mcp320x_adc_conversion(adc, channel->address, |
| channel->differential, device_index, val); |
| if (ret < 0) |
| goto out; |
| |
| ret = IIO_VAL_INT; |
| break; |
| |
| case IIO_CHAN_INFO_SCALE: |
| ret = regulator_get_voltage(adc->reg); |
| if (ret < 0) |
| goto out; |
| |
| /* convert regulator output voltage to mV */ |
| *val = ret / 1000; |
| *val2 = adc->chip_info->resolution; |
| ret = IIO_VAL_FRACTIONAL_LOG2; |
| break; |
| } |
| |
| out: |
| mutex_unlock(&adc->lock); |
| |
| return ret; |
| } |
| |
| #define MCP320X_VOLTAGE_CHANNEL(num) \ |
| { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = (num), \ |
| .address = (num), \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ |
| } |
| |
| #define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \ |
| { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = (chan1), \ |
| .channel2 = (chan2), \ |
| .address = (chan1), \ |
| .differential = 1, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ |
| } |
| |
| static const struct iio_chan_spec mcp3201_channels[] = { |
| MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), |
| }; |
| |
| static const struct iio_chan_spec mcp3202_channels[] = { |
| MCP320X_VOLTAGE_CHANNEL(0), |
| MCP320X_VOLTAGE_CHANNEL(1), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), |
| }; |
| |
| static const struct iio_chan_spec mcp3204_channels[] = { |
| MCP320X_VOLTAGE_CHANNEL(0), |
| MCP320X_VOLTAGE_CHANNEL(1), |
| MCP320X_VOLTAGE_CHANNEL(2), |
| MCP320X_VOLTAGE_CHANNEL(3), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), |
| }; |
| |
| static const struct iio_chan_spec mcp3208_channels[] = { |
| MCP320X_VOLTAGE_CHANNEL(0), |
| MCP320X_VOLTAGE_CHANNEL(1), |
| MCP320X_VOLTAGE_CHANNEL(2), |
| MCP320X_VOLTAGE_CHANNEL(3), |
| MCP320X_VOLTAGE_CHANNEL(4), |
| MCP320X_VOLTAGE_CHANNEL(5), |
| MCP320X_VOLTAGE_CHANNEL(6), |
| MCP320X_VOLTAGE_CHANNEL(7), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7), |
| MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6), |
| }; |
| |
| static const struct iio_info mcp320x_info = { |
| .read_raw = mcp320x_read_raw, |
| }; |
| |
| static const struct mcp320x_chip_info mcp320x_chip_infos[] = { |
| [mcp3001] = { |
| .channels = mcp3201_channels, |
| .num_channels = ARRAY_SIZE(mcp3201_channels), |
| .resolution = 10 |
| }, |
| [mcp3002] = { |
| .channels = mcp3202_channels, |
| .num_channels = ARRAY_SIZE(mcp3202_channels), |
| .resolution = 10 |
| }, |
| [mcp3004] = { |
| .channels = mcp3204_channels, |
| .num_channels = ARRAY_SIZE(mcp3204_channels), |
| .resolution = 10 |
| }, |
| [mcp3008] = { |
| .channels = mcp3208_channels, |
| .num_channels = ARRAY_SIZE(mcp3208_channels), |
| .resolution = 10 |
| }, |
| [mcp3201] = { |
| .channels = mcp3201_channels, |
| .num_channels = ARRAY_SIZE(mcp3201_channels), |
| .resolution = 12 |
| }, |
| [mcp3202] = { |
| .channels = mcp3202_channels, |
| .num_channels = ARRAY_SIZE(mcp3202_channels), |
| .resolution = 12 |
| }, |
| [mcp3204] = { |
| .channels = mcp3204_channels, |
| .num_channels = ARRAY_SIZE(mcp3204_channels), |
| .resolution = 12 |
| }, |
| [mcp3208] = { |
| .channels = mcp3208_channels, |
| .num_channels = ARRAY_SIZE(mcp3208_channels), |
| .resolution = 12 |
| }, |
| [mcp3301] = { |
| .channels = mcp3201_channels, |
| .num_channels = ARRAY_SIZE(mcp3201_channels), |
| .resolution = 13 |
| }, |
| [mcp3550_50] = { |
| .channels = mcp3201_channels, |
| .num_channels = ARRAY_SIZE(mcp3201_channels), |
| .resolution = 21, |
| /* 2% max deviation + 144 clock periods to exit shutdown */ |
| .conv_time = 80000 * 1.02 + 144000 / 102.4, |
| }, |
| [mcp3550_60] = { |
| .channels = mcp3201_channels, |
| .num_channels = ARRAY_SIZE(mcp3201_channels), |
| .resolution = 21, |
| .conv_time = 66670 * 1.02 + 144000 / 122.88, |
| }, |
| [mcp3551] = { |
| .channels = mcp3201_channels, |
| .num_channels = ARRAY_SIZE(mcp3201_channels), |
| .resolution = 21, |
| .conv_time = 73100 * 1.02 + 144000 / 112.64, |
| }, |
| [mcp3553] = { |
| .channels = mcp3201_channels, |
| .num_channels = ARRAY_SIZE(mcp3201_channels), |
| .resolution = 21, |
| .conv_time = 16670 * 1.02 + 144000 / 122.88, |
| }, |
| }; |
| |
| static int mcp320x_probe(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev; |
| struct mcp320x *adc; |
| const struct mcp320x_chip_info *chip_info; |
| int ret, device_index; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| adc = iio_priv(indio_dev); |
| adc->spi = spi; |
| |
| indio_dev->name = spi_get_device_id(spi)->name; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->info = &mcp320x_info; |
| spi_set_drvdata(spi, indio_dev); |
| |
| device_index = spi_get_device_id(spi)->driver_data; |
| chip_info = &mcp320x_chip_infos[device_index]; |
| indio_dev->channels = chip_info->channels; |
| indio_dev->num_channels = chip_info->num_channels; |
| |
| adc->chip_info = chip_info; |
| |
| adc->transfer[0].tx_buf = &adc->tx_buf; |
| adc->transfer[0].len = sizeof(adc->tx_buf); |
| adc->transfer[1].rx_buf = adc->rx_buf; |
| adc->transfer[1].len = DIV_ROUND_UP(chip_info->resolution, 8); |
| |
| if (chip_info->num_channels == 1) |
| /* single-channel converters are rx only (no MOSI pin) */ |
| spi_message_init_with_transfers(&adc->msg, |
| &adc->transfer[1], 1); |
| else |
| spi_message_init_with_transfers(&adc->msg, adc->transfer, |
| ARRAY_SIZE(adc->transfer)); |
| |
| switch (device_index) { |
| case mcp3550_50: |
| case mcp3550_60: |
| case mcp3551: |
| case mcp3553: |
| /* rx len increases from 24 to 25 bit in SPI mode 0,0 */ |
| if (!(spi->mode & SPI_CPOL)) |
| adc->transfer[1].len++; |
| |
| /* conversions are started by asserting CS pin for 8 usec */ |
| adc->start_conv_transfer.delay.value = 8; |
| adc->start_conv_transfer.delay.unit = SPI_DELAY_UNIT_USECS; |
| spi_message_init_with_transfers(&adc->start_conv_msg, |
| &adc->start_conv_transfer, 1); |
| |
| /* |
| * If CS was previously kept low (continuous conversion mode) |
| * and then changed to high, the chip is in shutdown. |
| * Sometimes it fails to wake from shutdown and clocks out |
| * only 0xffffff. The magic sequence of performing two |
| * conversions without delay between them resets the chip |
| * and ensures all subsequent conversions succeed. |
| */ |
| mcp320x_adc_conversion(adc, 0, 1, device_index, &ret); |
| mcp320x_adc_conversion(adc, 0, 1, device_index, &ret); |
| } |
| |
| adc->reg = devm_regulator_get(&spi->dev, "vref"); |
| if (IS_ERR(adc->reg)) |
| return PTR_ERR(adc->reg); |
| |
| ret = regulator_enable(adc->reg); |
| if (ret < 0) |
| return ret; |
| |
| mutex_init(&adc->lock); |
| |
| ret = iio_device_register(indio_dev); |
| if (ret < 0) |
| goto reg_disable; |
| |
| return 0; |
| |
| reg_disable: |
| regulator_disable(adc->reg); |
| |
| return ret; |
| } |
| |
| static int mcp320x_remove(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| struct mcp320x *adc = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| regulator_disable(adc->reg); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF) |
| static const struct of_device_id mcp320x_dt_ids[] = { |
| /* NOTE: The use of compatibles with no vendor prefix is deprecated. */ |
| { .compatible = "mcp3001" }, |
| { .compatible = "mcp3002" }, |
| { .compatible = "mcp3004" }, |
| { .compatible = "mcp3008" }, |
| { .compatible = "mcp3201" }, |
| { .compatible = "mcp3202" }, |
| { .compatible = "mcp3204" }, |
| { .compatible = "mcp3208" }, |
| { .compatible = "mcp3301" }, |
| { .compatible = "microchip,mcp3001" }, |
| { .compatible = "microchip,mcp3002" }, |
| { .compatible = "microchip,mcp3004" }, |
| { .compatible = "microchip,mcp3008" }, |
| { .compatible = "microchip,mcp3201" }, |
| { .compatible = "microchip,mcp3202" }, |
| { .compatible = "microchip,mcp3204" }, |
| { .compatible = "microchip,mcp3208" }, |
| { .compatible = "microchip,mcp3301" }, |
| { .compatible = "microchip,mcp3550-50" }, |
| { .compatible = "microchip,mcp3550-60" }, |
| { .compatible = "microchip,mcp3551" }, |
| { .compatible = "microchip,mcp3553" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, mcp320x_dt_ids); |
| #endif |
| |
| static const struct spi_device_id mcp320x_id[] = { |
| { "mcp3001", mcp3001 }, |
| { "mcp3002", mcp3002 }, |
| { "mcp3004", mcp3004 }, |
| { "mcp3008", mcp3008 }, |
| { "mcp3201", mcp3201 }, |
| { "mcp3202", mcp3202 }, |
| { "mcp3204", mcp3204 }, |
| { "mcp3208", mcp3208 }, |
| { "mcp3301", mcp3301 }, |
| { "mcp3550-50", mcp3550_50 }, |
| { "mcp3550-60", mcp3550_60 }, |
| { "mcp3551", mcp3551 }, |
| { "mcp3553", mcp3553 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, mcp320x_id); |
| |
| static struct spi_driver mcp320x_driver = { |
| .driver = { |
| .name = "mcp320x", |
| .of_match_table = of_match_ptr(mcp320x_dt_ids), |
| }, |
| .probe = mcp320x_probe, |
| .remove = mcp320x_remove, |
| .id_table = mcp320x_id, |
| }; |
| module_spi_driver(mcp320x_driver); |
| |
| MODULE_AUTHOR("Oskar Andero <oskar.andero@gmail.com>"); |
| MODULE_DESCRIPTION("Microchip Technology MCP3x01/02/04/08 and MCP3550/1/3"); |
| MODULE_LICENSE("GPL v2"); |