| /* |
| * Copyright (C) 2014 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include "imx6sx.dtsi" |
| |
| / { |
| model = "Freescale i.MX6 SoloX SDB Board"; |
| compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| memory@80000000 { |
| reg = <0x80000000 0x40000000>; |
| }; |
| |
| backlight_display: backlight-display { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm3 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <6>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| volume-up { |
| label = "Volume Up"; |
| gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| wakeup-source; |
| }; |
| |
| volume-down { |
| label = "Volume Down"; |
| gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| wakeup-source; |
| }; |
| }; |
| |
| vcc_sd3: regulator-vcc-sd3 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_vcc_sd3>; |
| regulator-name = "VCC_SD3"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg1_vbus: regulator-usb-otg1-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg1>; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg2_vbus: regulator-usb-otg2-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg2>; |
| regulator-name = "usb_otg2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_psu_5v: regulator-psu-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "PSU-5V0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reg_lcd_3v3: regulator-lcd-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "lcd-3v3"; |
| gpio = <&gpio3 27 0>; |
| enable-active-high; |
| }; |
| |
| reg_peri_3v3: regulator-peri-3v3 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_peri_3v3>; |
| regulator-name = "peri_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| reg_enet_3v3: regulator-enet-3v3 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet_3v3>; |
| regulator-name = "enet_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 6 GPIO_ACTIVE_LOW>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_pcie_gpio: regulator-pcie-gpio { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie_reg>; |
| regulator-name = "MPCIE_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_lcd_5v: regulator-lcd-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "lcd-5v0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| sound { |
| compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; |
| model = "wm8962-audio"; |
| ssi-controller = <&ssi2>; |
| audio-codec = <&codec>; |
| audio-routing = |
| "Headphone Jack", "HPOUTL", |
| "Headphone Jack", "HPOUTR", |
| "Ext Spk", "SPKOUTL", |
| "Ext Spk", "SPKOUTR", |
| "AMIC", "MICBIAS", |
| "IN3R", "AMIC"; |
| mux-int-port = <2>; |
| mux-ext-port = <6>; |
| }; |
| |
| panel { |
| compatible = "sii,43wvf1g"; |
| backlight = <&backlight_display>; |
| dvdd-supply = <®_lcd_3v3>; |
| avdd-supply = <®_lcd_5v>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&display_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| phy-supply = <®_enet_3v3>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy1>; |
| phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| |
| ethphy2: ethernet-phy@2 { |
| reg = <2>; |
| }; |
| }; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy2>; |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| }; |
| |
| &i2c4 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| status = "okay"; |
| |
| codec: wm8962@1a { |
| compatible = "wlf,wm8962"; |
| reg = <0x1a>; |
| clocks = <&clks IMX6SX_CLK_AUDIO>; |
| DCVDD-supply = <&vgen4_reg>; |
| DBVDD-supply = <&vgen4_reg>; |
| AVDD-supply = <&vgen4_reg>; |
| CPVDD-supply = <&vgen4_reg>; |
| MICVDD-supply = <&vgen3_reg>; |
| PLLVDD-supply = <&vgen4_reg>; |
| SPKVDD1-supply = <®_psu_5v>; |
| SPKVDD2-supply = <®_psu_5v>; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; |
| vpcie-supply = <®_pcie_gpio>; |
| status = "okay"; |
| }; |
| |
| &lcdif1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcd>; |
| status = "okay"; |
| |
| port { |
| display_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "okay"; |
| }; |
| |
| &snvs_poweroff { |
| status = "okay"; |
| }; |
| |
| &sai1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai1>; |
| status = "disabled"; |
| }; |
| |
| &ssi2 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart5 { /* for bluetooth */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| vbus-supply = <®_usb_otg1_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg1_id>; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usb_otg2_vbus>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usbphy1 { |
| fsl,tx-d-cal = <106>; |
| }; |
| |
| &usbphy2 { |
| fsl,tx-d-cal = <106>; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| non-removable; |
| no-1-8-v; |
| keep-power-in-suspend; |
| wakeup-source; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| bus-width = <8>; |
| cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; |
| keep-power-in-suspend; |
| wakeup-source; |
| vmmc-supply = <&vcc_sd3>; |
| status = "okay"; |
| }; |
| |
| &usdhc4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc4>; |
| cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| }; |
| |
| &iomuxc { |
| imx6x-sdb { |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 |
| MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 |
| MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 |
| MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 |
| MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 |
| >; |
| }; |
| |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 |
| MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 |
| MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 |
| MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 |
| MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 |
| MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 |
| MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 |
| MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 |
| MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 |
| MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 |
| MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 |
| MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 |
| MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 |
| MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 |
| MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 |
| /* phy reset */ |
| MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0 |
| >; |
| }; |
| |
| pinctrl_enet_3v3: enet3v3grp { |
| fsl,pins = < |
| MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 |
| MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 |
| MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 |
| MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 |
| MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 |
| MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 |
| MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 |
| MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 |
| MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 |
| MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 |
| MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 |
| MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpio_keysgrp { |
| fsl,pins = < |
| MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 |
| MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 |
| MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 |
| MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 |
| MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_lcd: lcdgrp { |
| fsl,pins = < |
| MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 |
| MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 |
| MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 |
| MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 |
| MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 |
| MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 |
| MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 |
| >; |
| }; |
| |
| pinctrl_pcie_reg: pciereggrp { |
| fsl,pins = < |
| MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0 |
| >; |
| }; |
| |
| pinctrl_peri_3v3: peri3v3grp { |
| fsl,pins = < |
| MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp-1 { |
| fsl,pins = < |
| MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 |
| >; |
| }; |
| |
| pinctrl_qspi2: qspi2grp { |
| fsl,pins = < |
| MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 |
| MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 |
| MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 |
| MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 |
| MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 |
| MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 |
| MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 |
| MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 |
| MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 |
| MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 |
| MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 |
| MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 |
| >; |
| }; |
| |
| pinctrl_vcc_sd3: vccsd3grp { |
| fsl,pins = < |
| MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 |
| >; |
| }; |
| |
| pinctrl_sai1: sai1grp { |
| fsl,pins = < |
| MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x130b0 |
| MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x130b0 |
| MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x120b0 |
| MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x130b0 |
| MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 |
| MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart5: uart5grp { |
| fsl,pins = < |
| MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 |
| MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 |
| MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 |
| MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usb_otg1: usbotg1grp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 |
| >; |
| }; |
| |
| pinctrl_usb_otg1_id: usbotg1idgrp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usb_otg2: usbot2ggrp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 |
| MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 |
| MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 |
| MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 |
| MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 |
| MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 |
| MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 |
| MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 |
| MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 |
| MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 |
| MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 |
| MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 |
| MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 |
| MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 |
| MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 |
| MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ |
| MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { |
| fsl,pins = < |
| MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 |
| MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 |
| MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 |
| MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 |
| MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 |
| MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 |
| MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 |
| MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 |
| MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 |
| MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { |
| fsl,pins = < |
| MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 |
| MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 |
| MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 |
| MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 |
| MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 |
| MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 |
| MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 |
| MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 |
| MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 |
| MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 |
| >; |
| }; |
| |
| pinctrl_usdhc4: usdhc4grp { |
| fsl,pins = < |
| MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 |
| MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 |
| MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 |
| MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 |
| MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 |
| MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 |
| MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ |
| MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0 |
| >; |
| }; |
| }; |
| }; |
