| /* |
| * S390 version |
| * Copyright IBM Corp. 1999, 2012 |
| * Author(s): Hartmut Penner (hp@de.ibm.com), |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) |
| * |
| * Derived from "arch/i386/kernel/setup.c" |
| * Copyright (C) 1995, Linus Torvalds |
| */ |
| |
| /* |
| * This file handles the architecture-dependent parts of initialization |
| */ |
| |
| #define KMSG_COMPONENT "setup" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/errno.h> |
| #include <linux/export.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/memblock.h> |
| #include <linux/mm.h> |
| #include <linux/stddef.h> |
| #include <linux/unistd.h> |
| #include <linux/ptrace.h> |
| #include <linux/user.h> |
| #include <linux/tty.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/initrd.h> |
| #include <linux/bootmem.h> |
| #include <linux/root_dev.h> |
| #include <linux/console.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/device.h> |
| #include <linux/notifier.h> |
| #include <linux/pfn.h> |
| #include <linux/ctype.h> |
| #include <linux/reboot.h> |
| #include <linux/topology.h> |
| #include <linux/ftrace.h> |
| #include <linux/kexec.h> |
| #include <linux/crash_dump.h> |
| #include <linux/memory.h> |
| #include <linux/compat.h> |
| |
| #include <asm/ipl.h> |
| #include <asm/uaccess.h> |
| #include <asm/facility.h> |
| #include <asm/smp.h> |
| #include <asm/mmu_context.h> |
| #include <asm/cpcmd.h> |
| #include <asm/lowcore.h> |
| #include <asm/irq.h> |
| #include <asm/page.h> |
| #include <asm/ptrace.h> |
| #include <asm/sections.h> |
| #include <asm/ebcdic.h> |
| #include <asm/kvm_virtio.h> |
| #include <asm/diag.h> |
| #include <asm/os_info.h> |
| #include <asm/sclp.h> |
| #include "entry.h" |
| |
| long psw_kernel_bits = PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_ASC_PRIMARY | |
| PSW_MASK_EA | PSW_MASK_BA; |
| long psw_user_bits = PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | |
| PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_MCHECK | |
| PSW_MASK_PSTATE | PSW_ASC_HOME; |
| |
| /* |
| * User copy operations. |
| */ |
| struct uaccess_ops uaccess; |
| EXPORT_SYMBOL(uaccess); |
| |
| /* |
| * Machine setup.. |
| */ |
| unsigned int console_mode = 0; |
| EXPORT_SYMBOL(console_mode); |
| |
| unsigned int console_devno = -1; |
| EXPORT_SYMBOL(console_devno); |
| |
| unsigned int console_irq = -1; |
| EXPORT_SYMBOL(console_irq); |
| |
| unsigned long elf_hwcap = 0; |
| char elf_platform[ELF_PLATFORM_SIZE]; |
| |
| struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS]; |
| |
| int __initdata memory_end_set; |
| unsigned long __initdata memory_end; |
| |
| unsigned long VMALLOC_START; |
| EXPORT_SYMBOL(VMALLOC_START); |
| |
| unsigned long VMALLOC_END; |
| EXPORT_SYMBOL(VMALLOC_END); |
| |
| struct page *vmemmap; |
| EXPORT_SYMBOL(vmemmap); |
| |
| #ifdef CONFIG_64BIT |
| unsigned long MODULES_VADDR; |
| unsigned long MODULES_END; |
| #endif |
| |
| /* An array with a pointer to the lowcore of every CPU. */ |
| struct _lowcore *lowcore_ptr[NR_CPUS]; |
| EXPORT_SYMBOL(lowcore_ptr); |
| |
| /* |
| * This is set up by the setup-routine at boot-time |
| * for S390 need to find out, what we have to setup |
| * using address 0x10400 ... |
| */ |
| |
| #include <asm/setup.h> |
| |
| /* |
| * condev= and conmode= setup parameter. |
| */ |
| |
| static int __init condev_setup(char *str) |
| { |
| int vdev; |
| |
| vdev = simple_strtoul(str, &str, 0); |
| if (vdev >= 0 && vdev < 65536) { |
| console_devno = vdev; |
| console_irq = -1; |
| } |
| return 1; |
| } |
| |
| __setup("condev=", condev_setup); |
| |
| static void __init set_preferred_console(void) |
| { |
| if (MACHINE_IS_KVM) { |
| if (sclp_has_vt220()) |
| add_preferred_console("ttyS", 1, NULL); |
| else if (sclp_has_linemode()) |
| add_preferred_console("ttyS", 0, NULL); |
| else |
| add_preferred_console("hvc", 0, NULL); |
| } else if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP) |
| add_preferred_console("ttyS", 0, NULL); |
| else if (CONSOLE_IS_3270) |
| add_preferred_console("tty3270", 0, NULL); |
| } |
| |
| static int __init conmode_setup(char *str) |
| { |
| #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0) |
| SET_CONSOLE_SCLP; |
| #endif |
| #if defined(CONFIG_TN3215_CONSOLE) |
| if (strncmp(str, "3215", 5) == 0) |
| SET_CONSOLE_3215; |
| #endif |
| #if defined(CONFIG_TN3270_CONSOLE) |
| if (strncmp(str, "3270", 5) == 0) |
| SET_CONSOLE_3270; |
| #endif |
| set_preferred_console(); |
| return 1; |
| } |
| |
| __setup("conmode=", conmode_setup); |
| |
| static void __init conmode_default(void) |
| { |
| char query_buffer[1024]; |
| char *ptr; |
| |
| if (MACHINE_IS_VM) { |
| cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL); |
| console_devno = simple_strtoul(query_buffer + 5, NULL, 16); |
| ptr = strstr(query_buffer, "SUBCHANNEL ="); |
| console_irq = simple_strtoul(ptr + 13, NULL, 16); |
| cpcmd("QUERY TERM", query_buffer, 1024, NULL); |
| ptr = strstr(query_buffer, "CONMODE"); |
| /* |
| * Set the conmode to 3215 so that the device recognition |
| * will set the cu_type of the console to 3215. If the |
| * conmode is 3270 and we don't set it back then both |
| * 3215 and the 3270 driver will try to access the console |
| * device (3215 as console and 3270 as normal tty). |
| */ |
| cpcmd("TERM CONMODE 3215", NULL, 0, NULL); |
| if (ptr == NULL) { |
| #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| return; |
| } |
| if (strncmp(ptr + 8, "3270", 4) == 0) { |
| #if defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #elif defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } else if (strncmp(ptr + 8, "3215", 4) == 0) { |
| #if defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } |
| } else { |
| #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } |
| } |
| |
| #ifdef CONFIG_ZFCPDUMP |
| static void __init setup_zfcpdump(unsigned int console_devno) |
| { |
| static char str[41]; |
| |
| if (ipl_info.type != IPL_TYPE_FCP_DUMP) |
| return; |
| if (OLDMEM_BASE) |
| return; |
| if (console_devno != -1) |
| sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x", |
| ipl_info.data.fcp.dev_id.devno, console_devno); |
| else |
| sprintf(str, " cio_ignore=all,!0.0.%04x", |
| ipl_info.data.fcp.dev_id.devno); |
| strcat(boot_command_line, str); |
| console_loglevel = 2; |
| } |
| #else |
| static inline void setup_zfcpdump(unsigned int console_devno) {} |
| #endif /* CONFIG_ZFCPDUMP */ |
| |
| /* |
| * Reboot, halt and power_off stubs. They just call _machine_restart, |
| * _machine_halt or _machine_power_off. |
| */ |
| |
| void machine_restart(char *command) |
| { |
| if ((!in_interrupt() && !in_atomic()) || oops_in_progress) |
| /* |
| * Only unblank the console if we are called in enabled |
| * context or a bust_spinlocks cleared the way for us. |
| */ |
| console_unblank(); |
| _machine_restart(command); |
| } |
| |
| void machine_halt(void) |
| { |
| if (!in_interrupt() || oops_in_progress) |
| /* |
| * Only unblank the console if we are called in enabled |
| * context or a bust_spinlocks cleared the way for us. |
| */ |
| console_unblank(); |
| _machine_halt(); |
| } |
| |
| void machine_power_off(void) |
| { |
| if (!in_interrupt() || oops_in_progress) |
| /* |
| * Only unblank the console if we are called in enabled |
| * context or a bust_spinlocks cleared the way for us. |
| */ |
| console_unblank(); |
| _machine_power_off(); |
| } |
| |
| /* |
| * Dummy power off function. |
| */ |
| void (*pm_power_off)(void) = machine_power_off; |
| EXPORT_SYMBOL_GPL(pm_power_off); |
| |
| static int __init early_parse_mem(char *p) |
| { |
| memory_end = memparse(p, &p); |
| memory_end_set = 1; |
| return 0; |
| } |
| early_param("mem", early_parse_mem); |
| |
| static int __init parse_vmalloc(char *arg) |
| { |
| if (!arg) |
| return -EINVAL; |
| VMALLOC_END = (memparse(arg, &arg) + PAGE_SIZE - 1) & PAGE_MASK; |
| return 0; |
| } |
| early_param("vmalloc", parse_vmalloc); |
| |
| unsigned int s390_user_mode = PRIMARY_SPACE_MODE; |
| EXPORT_SYMBOL_GPL(s390_user_mode); |
| |
| static void __init set_user_mode_primary(void) |
| { |
| psw_kernel_bits = (psw_kernel_bits & ~PSW_MASK_ASC) | PSW_ASC_HOME; |
| psw_user_bits = (psw_user_bits & ~PSW_MASK_ASC) | PSW_ASC_PRIMARY; |
| #ifdef CONFIG_COMPAT |
| psw32_user_bits = |
| (psw32_user_bits & ~PSW32_MASK_ASC) | PSW32_ASC_PRIMARY; |
| #endif |
| uaccess = MACHINE_HAS_MVCOS ? uaccess_mvcos_switch : uaccess_pt; |
| } |
| |
| static int __init early_parse_user_mode(char *p) |
| { |
| if (p && strcmp(p, "primary") == 0) |
| s390_user_mode = PRIMARY_SPACE_MODE; |
| else if (!p || strcmp(p, "home") == 0) |
| s390_user_mode = HOME_SPACE_MODE; |
| else |
| return 1; |
| return 0; |
| } |
| early_param("user_mode", early_parse_user_mode); |
| |
| static void __init setup_addressing_mode(void) |
| { |
| if (s390_user_mode != PRIMARY_SPACE_MODE) |
| return; |
| set_user_mode_primary(); |
| if (MACHINE_HAS_MVCOS) |
| pr_info("Address spaces switched, mvcos available\n"); |
| else |
| pr_info("Address spaces switched, mvcos not available\n"); |
| } |
| |
| void *restart_stack __attribute__((__section__(".data"))); |
| |
| static void __init setup_lowcore(void) |
| { |
| struct _lowcore *lc; |
| |
| /* |
| * Setup lowcore for boot cpu |
| */ |
| BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096); |
| lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0); |
| lc->restart_psw.mask = psw_kernel_bits; |
| lc->restart_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) restart_int_handler; |
| lc->external_new_psw.mask = psw_kernel_bits | |
| PSW_MASK_DAT | PSW_MASK_MCHECK; |
| lc->external_new_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) ext_int_handler; |
| lc->svc_new_psw.mask = psw_kernel_bits | |
| PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK; |
| lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call; |
| lc->program_new_psw.mask = psw_kernel_bits | |
| PSW_MASK_DAT | PSW_MASK_MCHECK; |
| lc->program_new_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) pgm_check_handler; |
| lc->mcck_new_psw.mask = psw_kernel_bits; |
| lc->mcck_new_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) mcck_int_handler; |
| lc->io_new_psw.mask = psw_kernel_bits | |
| PSW_MASK_DAT | PSW_MASK_MCHECK; |
| lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler; |
| lc->clock_comparator = -1ULL; |
| lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE; |
| lc->async_stack = (unsigned long) |
| __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE; |
| lc->panic_stack = (unsigned long) |
| __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE; |
| lc->current_task = (unsigned long) init_thread_union.thread_info.task; |
| lc->thread_info = (unsigned long) &init_thread_union; |
| lc->machine_flags = S390_lowcore.machine_flags; |
| lc->stfl_fac_list = S390_lowcore.stfl_fac_list; |
| memcpy(lc->stfle_fac_list, S390_lowcore.stfle_fac_list, |
| MAX_FACILITY_BIT/8); |
| #ifndef CONFIG_64BIT |
| if (MACHINE_HAS_IEEE) { |
| lc->extended_save_area_addr = (__u32) |
| __alloc_bootmem_low(PAGE_SIZE, PAGE_SIZE, 0); |
| /* enable extended save area */ |
| __ctl_set_bit(14, 29); |
| } |
| #else |
| lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0]; |
| #endif |
| lc->sync_enter_timer = S390_lowcore.sync_enter_timer; |
| lc->async_enter_timer = S390_lowcore.async_enter_timer; |
| lc->exit_timer = S390_lowcore.exit_timer; |
| lc->user_timer = S390_lowcore.user_timer; |
| lc->system_timer = S390_lowcore.system_timer; |
| lc->steal_timer = S390_lowcore.steal_timer; |
| lc->last_update_timer = S390_lowcore.last_update_timer; |
| lc->last_update_clock = S390_lowcore.last_update_clock; |
| lc->ftrace_func = S390_lowcore.ftrace_func; |
| |
| restart_stack = __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0); |
| restart_stack += ASYNC_SIZE; |
| |
| /* |
| * Set up PSW restart to call ipl.c:do_restart(). Copy the relevant |
| * restart data to the absolute zero lowcore. This is necesary if |
| * PSW restart is done on an offline CPU that has lowcore zero. |
| */ |
| lc->restart_stack = (unsigned long) restart_stack; |
| lc->restart_fn = (unsigned long) do_restart; |
| lc->restart_data = 0; |
| lc->restart_source = -1UL; |
| |
| /* Setup absolute zero lowcore */ |
| mem_assign_absolute(S390_lowcore.restart_stack, lc->restart_stack); |
| mem_assign_absolute(S390_lowcore.restart_fn, lc->restart_fn); |
| mem_assign_absolute(S390_lowcore.restart_data, lc->restart_data); |
| mem_assign_absolute(S390_lowcore.restart_source, lc->restart_source); |
| mem_assign_absolute(S390_lowcore.restart_psw, lc->restart_psw); |
| |
| set_prefix((u32)(unsigned long) lc); |
| lowcore_ptr[0] = lc; |
| } |
| |
| static struct resource code_resource = { |
| .name = "Kernel code", |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, |
| }; |
| |
| static struct resource data_resource = { |
| .name = "Kernel data", |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, |
| }; |
| |
| static struct resource bss_resource = { |
| .name = "Kernel bss", |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, |
| }; |
| |
| static struct resource __initdata *standard_resources[] = { |
| &code_resource, |
| &data_resource, |
| &bss_resource, |
| }; |
| |
| static void __init setup_resources(void) |
| { |
| struct resource *res, *std_res, *sub_res; |
| int i, j; |
| |
| code_resource.start = (unsigned long) &_text; |
| code_resource.end = (unsigned long) &_etext - 1; |
| data_resource.start = (unsigned long) &_etext; |
| data_resource.end = (unsigned long) &_edata - 1; |
| bss_resource.start = (unsigned long) &__bss_start; |
| bss_resource.end = (unsigned long) &__bss_stop - 1; |
| |
| for (i = 0; i < MEMORY_CHUNKS; i++) { |
| if (!memory_chunk[i].size) |
| continue; |
| if (memory_chunk[i].type == CHUNK_OLDMEM || |
| memory_chunk[i].type == CHUNK_CRASHK) |
| continue; |
| res = alloc_bootmem_low(sizeof(*res)); |
| res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; |
| switch (memory_chunk[i].type) { |
| case CHUNK_READ_WRITE: |
| case CHUNK_CRASHK: |
| res->name = "System RAM"; |
| break; |
| case CHUNK_READ_ONLY: |
| res->name = "System ROM"; |
| res->flags |= IORESOURCE_READONLY; |
| break; |
| default: |
| res->name = "reserved"; |
| } |
| res->start = memory_chunk[i].addr; |
| res->end = res->start + memory_chunk[i].size - 1; |
| request_resource(&iomem_resource, res); |
| |
| for (j = 0; j < ARRAY_SIZE(standard_resources); j++) { |
| std_res = standard_resources[j]; |
| if (std_res->start < res->start || |
| std_res->start > res->end) |
| continue; |
| if (std_res->end > res->end) { |
| sub_res = alloc_bootmem_low(sizeof(*sub_res)); |
| *sub_res = *std_res; |
| sub_res->end = res->end; |
| std_res->start = res->end + 1; |
| request_resource(res, sub_res); |
| } else { |
| request_resource(res, std_res); |
| } |
| } |
| } |
| } |
| |
| unsigned long real_memory_size; |
| EXPORT_SYMBOL_GPL(real_memory_size); |
| |
| static void __init setup_memory_end(void) |
| { |
| unsigned long vmax, vmalloc_size, tmp; |
| int i; |
| |
| |
| #ifdef CONFIG_ZFCPDUMP |
| if (ipl_info.type == IPL_TYPE_FCP_DUMP && !OLDMEM_BASE) { |
| memory_end = ZFCPDUMP_HSA_SIZE; |
| memory_end_set = 1; |
| } |
| #endif |
| real_memory_size = 0; |
| memory_end &= PAGE_MASK; |
| |
| /* |
| * Make sure all chunks are MAX_ORDER aligned so we don't need the |
| * extra checks that HOLES_IN_ZONE would require. |
| */ |
| for (i = 0; i < MEMORY_CHUNKS; i++) { |
| unsigned long start, end; |
| struct mem_chunk *chunk; |
| unsigned long align; |
| |
| chunk = &memory_chunk[i]; |
| align = 1UL << (MAX_ORDER + PAGE_SHIFT - 1); |
| start = (chunk->addr + align - 1) & ~(align - 1); |
| end = (chunk->addr + chunk->size) & ~(align - 1); |
| if (start >= end) |
| memset(chunk, 0, sizeof(*chunk)); |
| else { |
| chunk->addr = start; |
| chunk->size = end - start; |
| } |
| real_memory_size = max(real_memory_size, |
| chunk->addr + chunk->size); |
| } |
| |
| /* Choose kernel address space layout: 2, 3, or 4 levels. */ |
| #ifdef CONFIG_64BIT |
| vmalloc_size = VMALLOC_END ?: (128UL << 30) - MODULES_LEN; |
| tmp = (memory_end ?: real_memory_size) / PAGE_SIZE; |
| tmp = tmp * (sizeof(struct page) + PAGE_SIZE) + vmalloc_size; |
| if (tmp <= (1UL << 42)) |
| vmax = 1UL << 42; /* 3-level kernel page table */ |
| else |
| vmax = 1UL << 53; /* 4-level kernel page table */ |
| /* module area is at the end of the kernel address space. */ |
| MODULES_END = vmax; |
| MODULES_VADDR = MODULES_END - MODULES_LEN; |
| VMALLOC_END = MODULES_VADDR; |
| #else |
| vmalloc_size = VMALLOC_END ?: 96UL << 20; |
| vmax = 1UL << 31; /* 2-level kernel page table */ |
| /* vmalloc area is at the end of the kernel address space. */ |
| VMALLOC_END = vmax; |
| #endif |
| VMALLOC_START = vmax - vmalloc_size; |
| |
| /* Split remaining virtual space between 1:1 mapping & vmemmap array */ |
| tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page)); |
| /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */ |
| tmp = SECTION_ALIGN_UP(tmp); |
| tmp = VMALLOC_START - tmp * sizeof(struct page); |
| tmp &= ~((vmax >> 11) - 1); /* align to page table level */ |
| tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS); |
| vmemmap = (struct page *) tmp; |
| |
| /* Take care that memory_end is set and <= vmemmap */ |
| memory_end = min(memory_end ?: real_memory_size, tmp); |
| |
| /* Fixup memory chunk array to fit into 0..memory_end */ |
| for (i = 0; i < MEMORY_CHUNKS; i++) { |
| struct mem_chunk *chunk = &memory_chunk[i]; |
| |
| if (chunk->addr >= memory_end) { |
| memset(chunk, 0, sizeof(*chunk)); |
| continue; |
| } |
| if (chunk->addr + chunk->size > memory_end) |
| chunk->size = memory_end - chunk->addr; |
| } |
| } |
| |
| static void __init setup_vmcoreinfo(void) |
| { |
| mem_assign_absolute(S390_lowcore.vmcore_info, paddr_vmcoreinfo_note()); |
| } |
| |
| #ifdef CONFIG_CRASH_DUMP |
| |
| /* |
| * Find suitable location for crashkernel memory |
| */ |
| static unsigned long __init find_crash_base(unsigned long crash_size, |
| char **msg) |
| { |
| unsigned long crash_base; |
| struct mem_chunk *chunk; |
| int i; |
| |
| if (memory_chunk[0].size < crash_size) { |
| *msg = "first memory chunk must be at least crashkernel size"; |
| return 0; |
| } |
| if (OLDMEM_BASE && crash_size == OLDMEM_SIZE) |
| return OLDMEM_BASE; |
| |
| for (i = MEMORY_CHUNKS - 1; i >= 0; i--) { |
| chunk = &memory_chunk[i]; |
| if (chunk->size == 0) |
| continue; |
| if (chunk->type != CHUNK_READ_WRITE) |
| continue; |
| if (chunk->size < crash_size) |
| continue; |
| crash_base = (chunk->addr + chunk->size) - crash_size; |
| if (crash_base < crash_size) |
| continue; |
| if (crash_base < ZFCPDUMP_HSA_SIZE_MAX) |
| continue; |
| if (crash_base < (unsigned long) INITRD_START + INITRD_SIZE) |
| continue; |
| return crash_base; |
| } |
| *msg = "no suitable area found"; |
| return 0; |
| } |
| |
| /* |
| * Check if crash_base and crash_size is valid |
| */ |
| static int __init verify_crash_base(unsigned long crash_base, |
| unsigned long crash_size, |
| char **msg) |
| { |
| struct mem_chunk *chunk; |
| int i; |
| |
| /* |
| * Because we do the swap to zero, we must have at least 'crash_size' |
| * bytes free space before crash_base |
| */ |
| if (crash_size > crash_base) { |
| *msg = "crashkernel offset must be greater than size"; |
| return -EINVAL; |
| } |
| |
| /* First memory chunk must be at least crash_size */ |
| if (memory_chunk[0].size < crash_size) { |
| *msg = "first memory chunk must be at least crashkernel size"; |
| return -EINVAL; |
| } |
| /* Check if we fit into the respective memory chunk */ |
| for (i = 0; i < MEMORY_CHUNKS; i++) { |
| chunk = &memory_chunk[i]; |
| if (chunk->size == 0) |
| continue; |
| if (crash_base < chunk->addr) |
| continue; |
| if (crash_base >= chunk->addr + chunk->size) |
| continue; |
| /* we have found the memory chunk */ |
| if (crash_base + crash_size > chunk->addr + chunk->size) { |
| *msg = "selected memory chunk is too small for " |
| "crashkernel memory"; |
| return -EINVAL; |
| } |
| return 0; |
| } |
| *msg = "invalid memory range specified"; |
| return -EINVAL; |
| } |
| |
| /* |
| * Reserve kdump memory by creating a memory hole in the mem_chunk array |
| */ |
| static void __init reserve_kdump_bootmem(unsigned long addr, unsigned long size, |
| int type) |
| { |
| create_mem_hole(memory_chunk, addr, size, type); |
| } |
| |
| /* |
| * When kdump is enabled, we have to ensure that no memory from |
| * the area [0 - crashkernel memory size] and |
| * [crashk_res.start - crashk_res.end] is set offline. |
| */ |
| static int kdump_mem_notifier(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct memory_notify *arg = data; |
| |
| if (arg->start_pfn < PFN_DOWN(resource_size(&crashk_res))) |
| return NOTIFY_BAD; |
| if (arg->start_pfn > PFN_DOWN(crashk_res.end)) |
| return NOTIFY_OK; |
| if (arg->start_pfn + arg->nr_pages - 1 < PFN_DOWN(crashk_res.start)) |
| return NOTIFY_OK; |
| return NOTIFY_BAD; |
| } |
| |
| static struct notifier_block kdump_mem_nb = { |
| .notifier_call = kdump_mem_notifier, |
| }; |
| |
| #endif |
| |
| /* |
| * Make sure that oldmem, where the dump is stored, is protected |
| */ |
| static void reserve_oldmem(void) |
| { |
| #ifdef CONFIG_CRASH_DUMP |
| if (!OLDMEM_BASE) |
| return; |
| |
| reserve_kdump_bootmem(OLDMEM_BASE, OLDMEM_SIZE, CHUNK_OLDMEM); |
| reserve_kdump_bootmem(OLDMEM_SIZE, memory_end - OLDMEM_SIZE, |
| CHUNK_OLDMEM); |
| if (OLDMEM_BASE + OLDMEM_SIZE == real_memory_size) |
| saved_max_pfn = PFN_DOWN(OLDMEM_BASE) - 1; |
| else |
| saved_max_pfn = PFN_DOWN(real_memory_size) - 1; |
| #endif |
| } |
| |
| /* |
| * Reserve memory for kdump kernel to be loaded with kexec |
| */ |
| static void __init reserve_crashkernel(void) |
| { |
| #ifdef CONFIG_CRASH_DUMP |
| unsigned long long crash_base, crash_size; |
| char *msg = NULL; |
| int rc; |
| |
| rc = parse_crashkernel(boot_command_line, memory_end, &crash_size, |
| &crash_base); |
| if (rc || crash_size == 0) |
| return; |
| crash_base = ALIGN(crash_base, KEXEC_CRASH_MEM_ALIGN); |
| crash_size = ALIGN(crash_size, KEXEC_CRASH_MEM_ALIGN); |
| if (register_memory_notifier(&kdump_mem_nb)) |
| return; |
| if (!crash_base) |
| crash_base = find_crash_base(crash_size, &msg); |
| if (!crash_base) { |
| pr_info("crashkernel reservation failed: %s\n", msg); |
| unregister_memory_notifier(&kdump_mem_nb); |
| return; |
| } |
| if (verify_crash_base(crash_base, crash_size, &msg)) { |
| pr_info("crashkernel reservation failed: %s\n", msg); |
| unregister_memory_notifier(&kdump_mem_nb); |
| return; |
| } |
| if (!OLDMEM_BASE && MACHINE_IS_VM) |
| diag10_range(PFN_DOWN(crash_base), PFN_DOWN(crash_size)); |
| crashk_res.start = crash_base; |
| crashk_res.end = crash_base + crash_size - 1; |
| insert_resource(&iomem_resource, &crashk_res); |
| reserve_kdump_bootmem(crash_base, crash_size, CHUNK_CRASHK); |
| pr_info("Reserving %lluMB of memory at %lluMB " |
| "for crashkernel (System RAM: %luMB)\n", |
| crash_size >> 20, crash_base >> 20, memory_end >> 20); |
| os_info_crashkernel_add(crash_base, crash_size); |
| #endif |
| } |
| |
| static void __init setup_memory(void) |
| { |
| unsigned long bootmap_size; |
| unsigned long start_pfn, end_pfn; |
| int i; |
| |
| /* |
| * partially used pages are not usable - thus |
| * we are rounding upwards: |
| */ |
| start_pfn = PFN_UP(__pa(&_end)); |
| end_pfn = max_pfn = PFN_DOWN(memory_end); |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| /* |
| * Move the initrd in case the bitmap of the bootmem allocater |
| * would overwrite it. |
| */ |
| |
| if (INITRD_START && INITRD_SIZE) { |
| unsigned long bmap_size; |
| unsigned long start; |
| |
| bmap_size = bootmem_bootmap_pages(end_pfn - start_pfn + 1); |
| bmap_size = PFN_PHYS(bmap_size); |
| |
| if (PFN_PHYS(start_pfn) + bmap_size > INITRD_START) { |
| start = PFN_PHYS(start_pfn) + bmap_size + PAGE_SIZE; |
| |
| #ifdef CONFIG_CRASH_DUMP |
| if (OLDMEM_BASE) { |
| /* Move initrd behind kdump oldmem */ |
| if (start + INITRD_SIZE > OLDMEM_BASE && |
| start < OLDMEM_BASE + OLDMEM_SIZE) |
| start = OLDMEM_BASE + OLDMEM_SIZE; |
| } |
| #endif |
| if (start + INITRD_SIZE > memory_end) { |
| pr_err("initrd extends beyond end of " |
| "memory (0x%08lx > 0x%08lx) " |
| "disabling initrd\n", |
| start + INITRD_SIZE, memory_end); |
| INITRD_START = INITRD_SIZE = 0; |
| } else { |
| pr_info("Moving initrd (0x%08lx -> " |
| "0x%08lx, size: %ld)\n", |
| INITRD_START, start, INITRD_SIZE); |
| memmove((void *) start, (void *) INITRD_START, |
| INITRD_SIZE); |
| INITRD_START = start; |
| } |
| } |
| } |
| #endif |
| |
| /* |
| * Initialize the boot-time allocator |
| */ |
| bootmap_size = init_bootmem(start_pfn, end_pfn); |
| |
| /* |
| * Register RAM areas with the bootmem allocator. |
| */ |
| |
| for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { |
| unsigned long start_chunk, end_chunk, pfn; |
| |
| if (memory_chunk[i].type != CHUNK_READ_WRITE && |
| memory_chunk[i].type != CHUNK_CRASHK) |
| continue; |
| start_chunk = PFN_DOWN(memory_chunk[i].addr); |
| end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size); |
| end_chunk = min(end_chunk, end_pfn); |
| if (start_chunk >= end_chunk) |
| continue; |
| memblock_add_node(PFN_PHYS(start_chunk), |
| PFN_PHYS(end_chunk - start_chunk), 0); |
| pfn = max(start_chunk, start_pfn); |
| storage_key_init_range(PFN_PHYS(pfn), PFN_PHYS(end_chunk)); |
| } |
| |
| psw_set_key(PAGE_DEFAULT_KEY); |
| |
| free_bootmem_with_active_regions(0, max_pfn); |
| |
| /* |
| * Reserve memory used for lowcore/command line/kernel image. |
| */ |
| reserve_bootmem(0, (unsigned long)_ehead, BOOTMEM_DEFAULT); |
| reserve_bootmem((unsigned long)_stext, |
| PFN_PHYS(start_pfn) - (unsigned long)_stext, |
| BOOTMEM_DEFAULT); |
| /* |
| * Reserve the bootmem bitmap itself as well. We do this in two |
| * steps (first step was init_bootmem()) because this catches |
| * the (very unlikely) case of us accidentally initializing the |
| * bootmem allocator with an invalid RAM area. |
| */ |
| reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size, |
| BOOTMEM_DEFAULT); |
| |
| #ifdef CONFIG_CRASH_DUMP |
| if (crashk_res.start) |
| reserve_bootmem(crashk_res.start, |
| crashk_res.end - crashk_res.start + 1, |
| BOOTMEM_DEFAULT); |
| if (is_kdump_kernel()) |
| reserve_bootmem(elfcorehdr_addr - OLDMEM_BASE, |
| PAGE_ALIGN(elfcorehdr_size), BOOTMEM_DEFAULT); |
| #endif |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (INITRD_START && INITRD_SIZE) { |
| if (INITRD_START + INITRD_SIZE <= memory_end) { |
| reserve_bootmem(INITRD_START, INITRD_SIZE, |
| BOOTMEM_DEFAULT); |
| initrd_start = INITRD_START; |
| initrd_end = initrd_start + INITRD_SIZE; |
| } else { |
| pr_err("initrd extends beyond end of " |
| "memory (0x%08lx > 0x%08lx) " |
| "disabling initrd\n", |
| initrd_start + INITRD_SIZE, memory_end); |
| initrd_start = initrd_end = 0; |
| } |
| } |
| #endif |
| } |
| |
| /* |
| * Setup hardware capabilities. |
| */ |
| static void __init setup_hwcaps(void) |
| { |
| static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 }; |
| struct cpuid cpu_id; |
| int i; |
| |
| /* |
| * The store facility list bits numbers as found in the principles |
| * of operation are numbered with bit 1UL<<31 as number 0 to |
| * bit 1UL<<0 as number 31. |
| * Bit 0: instructions named N3, "backported" to esa-mode |
| * Bit 2: z/Architecture mode is active |
| * Bit 7: the store-facility-list-extended facility is installed |
| * Bit 17: the message-security assist is installed |
| * Bit 19: the long-displacement facility is installed |
| * Bit 21: the extended-immediate facility is installed |
| * Bit 22: extended-translation facility 3 is installed |
| * Bit 30: extended-translation facility 3 enhancement facility |
| * These get translated to: |
| * HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1, |
| * HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3, |
| * HWCAP_S390_LDISP bit 4, HWCAP_S390_EIMM bit 5 and |
| * HWCAP_S390_ETF3EH bit 8 (22 && 30). |
| */ |
| for (i = 0; i < 6; i++) |
| if (test_facility(stfl_bits[i])) |
| elf_hwcap |= 1UL << i; |
| |
| if (test_facility(22) && test_facility(30)) |
| elf_hwcap |= HWCAP_S390_ETF3EH; |
| |
| /* |
| * Check for additional facilities with store-facility-list-extended. |
| * stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0 |
| * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information |
| * as stored by stfl, bits 32-xxx contain additional facilities. |
| * How many facility words are stored depends on the number of |
| * doublewords passed to the instruction. The additional facilities |
| * are: |
| * Bit 42: decimal floating point facility is installed |
| * Bit 44: perform floating point operation facility is installed |
| * translated to: |
| * HWCAP_S390_DFP bit 6 (42 && 44). |
| */ |
| if ((elf_hwcap & (1UL << 2)) && test_facility(42) && test_facility(44)) |
| elf_hwcap |= HWCAP_S390_DFP; |
| |
| /* |
| * Huge page support HWCAP_S390_HPAGE is bit 7. |
| */ |
| if (MACHINE_HAS_HPAGE) |
| elf_hwcap |= HWCAP_S390_HPAGE; |
| |
| #if defined(CONFIG_64BIT) |
| /* |
| * 64-bit register support for 31-bit processes |
| * HWCAP_S390_HIGH_GPRS is bit 9. |
| */ |
| elf_hwcap |= HWCAP_S390_HIGH_GPRS; |
| |
| /* |
| * Transactional execution support HWCAP_S390_TE is bit 10. |
| */ |
| if (test_facility(50) && test_facility(73)) |
| elf_hwcap |= HWCAP_S390_TE; |
| #endif |
| |
| get_cpu_id(&cpu_id); |
| switch (cpu_id.machine) { |
| case 0x9672: |
| #if !defined(CONFIG_64BIT) |
| default: /* Use "g5" as default for 31 bit kernels. */ |
| #endif |
| strcpy(elf_platform, "g5"); |
| break; |
| case 0x2064: |
| case 0x2066: |
| #if defined(CONFIG_64BIT) |
| default: /* Use "z900" as default for 64 bit kernels. */ |
| #endif |
| strcpy(elf_platform, "z900"); |
| break; |
| case 0x2084: |
| case 0x2086: |
| strcpy(elf_platform, "z990"); |
| break; |
| case 0x2094: |
| case 0x2096: |
| strcpy(elf_platform, "z9-109"); |
| break; |
| case 0x2097: |
| case 0x2098: |
| strcpy(elf_platform, "z10"); |
| break; |
| case 0x2817: |
| case 0x2818: |
| strcpy(elf_platform, "z196"); |
| break; |
| case 0x2827: |
| strcpy(elf_platform, "zEC12"); |
| break; |
| } |
| } |
| |
| /* |
| * Setup function called from init/main.c just after the banner |
| * was printed. |
| */ |
| |
| void __init setup_arch(char **cmdline_p) |
| { |
| /* |
| * print what head.S has found out about the machine |
| */ |
| #ifndef CONFIG_64BIT |
| if (MACHINE_IS_VM) |
| pr_info("Linux is running as a z/VM " |
| "guest operating system in 31-bit mode\n"); |
| else if (MACHINE_IS_LPAR) |
| pr_info("Linux is running natively in 31-bit mode\n"); |
| if (MACHINE_HAS_IEEE) |
| pr_info("The hardware system has IEEE compatible " |
| "floating point units\n"); |
| else |
| pr_info("The hardware system has no IEEE compatible " |
| "floating point units\n"); |
| #else /* CONFIG_64BIT */ |
| if (MACHINE_IS_VM) |
| pr_info("Linux is running as a z/VM " |
| "guest operating system in 64-bit mode\n"); |
| else if (MACHINE_IS_KVM) |
| pr_info("Linux is running under KVM in 64-bit mode\n"); |
| else if (MACHINE_IS_LPAR) |
| pr_info("Linux is running natively in 64-bit mode\n"); |
| #endif /* CONFIG_64BIT */ |
| |
| /* Have one command line that is parsed and saved in /proc/cmdline */ |
| /* boot_command_line has been already set up in early.c */ |
| *cmdline_p = boot_command_line; |
| |
| ROOT_DEV = Root_RAM0; |
| |
| init_mm.start_code = PAGE_OFFSET; |
| init_mm.end_code = (unsigned long) &_etext; |
| init_mm.end_data = (unsigned long) &_edata; |
| init_mm.brk = (unsigned long) &_end; |
| |
| if (MACHINE_HAS_MVCOS) |
| memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess)); |
| else |
| memcpy(&uaccess, &uaccess_std, sizeof(uaccess)); |
| |
| parse_early_param(); |
| |
| os_info_init(); |
| setup_ipl(); |
| setup_memory_end(); |
| setup_addressing_mode(); |
| reserve_oldmem(); |
| reserve_crashkernel(); |
| setup_memory(); |
| setup_resources(); |
| setup_vmcoreinfo(); |
| setup_lowcore(); |
| |
| cpu_init(); |
| s390_init_cpu_topology(); |
| |
| /* |
| * Setup capabilities (ELF_HWCAP & ELF_PLATFORM). |
| */ |
| setup_hwcaps(); |
| |
| /* |
| * Create kernel page tables and switch to virtual addressing. |
| */ |
| paging_init(); |
| |
| /* Setup default console */ |
| conmode_default(); |
| set_preferred_console(); |
| |
| /* Setup zfcpdump support */ |
| setup_zfcpdump(console_devno); |
| } |