| Kernel driver i2c-sis5595 |
| Frodo Looijaard <frodol@dds.nl>, |
| Mark D. Studebaker <mdsxyz123@yahoo.com>, |
| Philip Edelbrock <phil@netroedge.com> |
| * Silicon Integrated Systems Corp. SiS5595 Southbridge |
| Datasheet: Publicly available at the Silicon Integrated Systems Corp. site. |
| Note: all have mfr. ID 0x1039. |
| Note: these chips contain a 0008 device which is incompatible with the |
| 5595. We recognize these by the presence of the listed |
| "blacklist" PCI ID and refuse to load. |
| NOT SUPPORTED PCI ID BLACKLIST PCI ID |
| * force_addr=0xaddr Set the I/O base address. Useful for boards |
| that don't set the address in the BIOS. Does not do a |
| PCI force; the device must still be present in lspci. |
| Don't use this unless the driver complains that the |
| i2c-sis5595 is a true SMBus host driver for motherboards with the SiS5595 |
| WARNING: If you are trying to access the integrated sensors on the SiS5595 |
| chip, you want the sis5595 driver for those, not this driver. This driver |
| is a BUS driver, not a CHIP driver. A BUS driver is used by other CHIP |
| drivers to access chips on the bus. |