| /* |
| * Simulated SCSI driver. |
| * |
| * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co |
| * David Mosberger-Tang <davidm@hpl.hp.com> |
| * Stephane Eranian <eranian@hpl.hp.com> |
| * |
| * 02/01/15 David Mosberger Updated for v2.5.1 |
| * 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33 |
| */ |
| #include <linux/blkdev.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <asm/irq.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| |
| #define DEBUG_SIMSCSI 0 |
| |
| #define SIMSCSI_REQ_QUEUE_LEN 64 |
| #define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd" |
| |
| /* Simulator system calls: */ |
| |
| #define SSC_OPEN 50 |
| #define SSC_CLOSE 51 |
| #define SSC_READ 52 |
| #define SSC_WRITE 53 |
| #define SSC_GET_COMPLETION 54 |
| #define SSC_WAIT_COMPLETION 55 |
| |
| #define SSC_WRITE_ACCESS 2 |
| #define SSC_READ_ACCESS 1 |
| |
| #if DEBUG_SIMSCSI |
| int simscsi_debug; |
| # define DBG simscsi_debug |
| #else |
| # define DBG 0 |
| #endif |
| |
| static struct Scsi_Host *host; |
| |
| static void simscsi_interrupt (unsigned long val); |
| static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0); |
| |
| struct disk_req { |
| unsigned long addr; |
| unsigned len; |
| }; |
| |
| struct disk_stat { |
| int fd; |
| unsigned count; |
| }; |
| |
| extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr); |
| |
| static int desc[16] = { |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 |
| }; |
| |
| static struct queue_entry { |
| struct scsi_cmnd *sc; |
| } queue[SIMSCSI_REQ_QUEUE_LEN]; |
| |
| static int rd, wr; |
| static atomic_t num_reqs = ATOMIC_INIT(0); |
| |
| /* base name for default disks */ |
| static char *simscsi_root = DEFAULT_SIMSCSI_ROOT; |
| |
| #define MAX_ROOT_LEN 128 |
| |
| /* |
| * used to setup a new base for disk images |
| * to use /foo/bar/disk[a-z] as disk images |
| * you have to specify simscsi=/foo/bar/disk on the command line |
| */ |
| static int __init |
| simscsi_setup (char *s) |
| { |
| /* XXX Fix me we may need to strcpy() ? */ |
| if (strlen(s) > MAX_ROOT_LEN) { |
| printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n", |
| simscsi_root); |
| } |
| simscsi_root = s; |
| return 1; |
| } |
| |
| __setup("simscsi=", simscsi_setup); |
| |
| static void |
| simscsi_interrupt (unsigned long val) |
| { |
| struct scsi_cmnd *sc; |
| |
| while ((sc = queue[rd].sc) != 0) { |
| atomic_dec(&num_reqs); |
| queue[rd].sc = NULL; |
| if (DBG) |
| printk("simscsi_interrupt: done with %ld\n", sc->serial_number); |
| (*sc->scsi_done)(sc); |
| rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN; |
| } |
| } |
| |
| static int |
| simscsi_biosparam (struct scsi_device *sdev, struct block_device *n, |
| sector_t capacity, int ip[]) |
| { |
| ip[0] = 64; /* heads */ |
| ip[1] = 32; /* sectors */ |
| ip[2] = capacity >> 11; /* cylinders */ |
| return 0; |
| } |
| |
| static void |
| simscsi_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset, unsigned long len) |
| { |
| struct disk_stat stat; |
| struct disk_req req; |
| |
| req.addr = __pa(sc->request_buffer); |
| req.len = len; /* # of bytes to transfer */ |
| |
| if (sc->request_bufflen < req.len) |
| return; |
| |
| stat.fd = desc[sc->device->id]; |
| if (DBG) |
| printk("simscsi_%s @ %lx (off %lx)\n", |
| mode == SSC_READ ? "read":"write", req.addr, offset); |
| ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); |
| ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); |
| |
| if (stat.count == req.len) { |
| sc->result = GOOD; |
| } else { |
| sc->result = DID_ERROR << 16; |
| } |
| } |
| |
| static void |
| simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset) |
| { |
| int list_len = sc->use_sg; |
| struct scatterlist *sl = (struct scatterlist *)sc->request_buffer; |
| struct disk_stat stat; |
| struct disk_req req; |
| |
| stat.fd = desc[sc->device->id]; |
| |
| while (list_len) { |
| req.addr = __pa(page_address(sl->page) + sl->offset); |
| req.len = sl->length; |
| if (DBG) |
| printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n", |
| mode == SSC_READ ? "read":"write", req.addr, offset, |
| list_len, sl->length); |
| ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); |
| ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); |
| |
| /* should not happen in our case */ |
| if (stat.count != req.len) { |
| sc->result = DID_ERROR << 16; |
| return; |
| } |
| offset += sl->length; |
| sl++; |
| list_len--; |
| } |
| sc->result = GOOD; |
| } |
| |
| /* |
| * function handling both READ_6/WRITE_6 (non-scatter/gather mode) |
| * commands. |
| * Added 02/26/99 S.Eranian |
| */ |
| static void |
| simscsi_readwrite6 (struct scsi_cmnd *sc, int mode) |
| { |
| unsigned long offset; |
| |
| offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512; |
| if (sc->use_sg > 0) |
| simscsi_sg_readwrite(sc, mode, offset); |
| else |
| simscsi_readwrite(sc, mode, offset, sc->cmnd[4]*512); |
| } |
| |
| static size_t |
| simscsi_get_disk_size (int fd) |
| { |
| struct disk_stat stat; |
| size_t bit, sectors = 0; |
| struct disk_req req; |
| char buf[512]; |
| |
| /* |
| * This is a bit kludgey: the simulator doesn't provide a |
| * direct way of determining the disk size, so we do a binary |
| * search, assuming a maximum disk size of 128GB. |
| */ |
| for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) { |
| req.addr = __pa(&buf); |
| req.len = sizeof(buf); |
| ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); |
| stat.fd = fd; |
| ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); |
| if (stat.count == sizeof(buf)) |
| sectors |= bit; |
| } |
| return sectors - 1; /* return last valid sector number */ |
| } |
| |
| static void |
| simscsi_readwrite10 (struct scsi_cmnd *sc, int mode) |
| { |
| unsigned long offset; |
| |
| offset = (((unsigned long)sc->cmnd[2] << 24) |
| | ((unsigned long)sc->cmnd[3] << 16) |
| | ((unsigned long)sc->cmnd[4] << 8) |
| | ((unsigned long)sc->cmnd[5] << 0))*512UL; |
| if (sc->use_sg > 0) |
| simscsi_sg_readwrite(sc, mode, offset); |
| else |
| simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512); |
| } |
| |
| static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len) |
| { |
| |
| int scatterlen = sc->use_sg; |
| struct scatterlist *slp; |
| |
| if (scatterlen == 0) |
| memcpy(sc->request_buffer, buf, len); |
| else for (slp = (struct scatterlist *)sc->request_buffer; |
| scatterlen-- > 0 && len > 0; slp++) { |
| unsigned thislen = min(len, slp->length); |
| |
| memcpy(page_address(slp->page) + slp->offset, buf, thislen); |
| slp++; |
| len -= thislen; |
| } |
| } |
| |
| static int |
| simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) |
| { |
| unsigned int target_id = sc->device->id; |
| char fname[MAX_ROOT_LEN+16]; |
| size_t disk_size; |
| char *buf; |
| char localbuf[36]; |
| #if DEBUG_SIMSCSI |
| register long sp asm ("sp"); |
| |
| if (DBG) |
| printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n", |
| target_id, sc->cmnd[0], sc->serial_number, sp, done); |
| #endif |
| |
| sc->result = DID_BAD_TARGET << 16; |
| sc->scsi_done = done; |
| if (target_id <= 15 && sc->device->lun == 0) { |
| switch (sc->cmnd[0]) { |
| case INQUIRY: |
| if (sc->request_bufflen < 35) { |
| break; |
| } |
| sprintf (fname, "%s%c", simscsi_root, 'a' + target_id); |
| desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS, |
| 0, 0, SSC_OPEN); |
| if (desc[target_id] < 0) { |
| /* disk doesn't exist... */ |
| break; |
| } |
| buf = localbuf; |
| buf[0] = 0; /* magnetic disk */ |
| buf[1] = 0; /* not a removable medium */ |
| buf[2] = 2; /* SCSI-2 compliant device */ |
| buf[3] = 2; /* SCSI-2 response data format */ |
| buf[4] = 31; /* additional length (bytes) */ |
| buf[5] = 0; /* reserved */ |
| buf[6] = 0; /* reserved */ |
| buf[7] = 0; /* various flags */ |
| memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28); |
| simscsi_fillresult(sc, buf, 36); |
| sc->result = GOOD; |
| break; |
| |
| case TEST_UNIT_READY: |
| sc->result = GOOD; |
| break; |
| |
| case READ_6: |
| if (desc[target_id] < 0 ) |
| break; |
| simscsi_readwrite6(sc, SSC_READ); |
| break; |
| |
| case READ_10: |
| if (desc[target_id] < 0 ) |
| break; |
| simscsi_readwrite10(sc, SSC_READ); |
| break; |
| |
| case WRITE_6: |
| if (desc[target_id] < 0) |
| break; |
| simscsi_readwrite6(sc, SSC_WRITE); |
| break; |
| |
| case WRITE_10: |
| if (desc[target_id] < 0) |
| break; |
| simscsi_readwrite10(sc, SSC_WRITE); |
| break; |
| |
| case READ_CAPACITY: |
| if (desc[target_id] < 0 || sc->request_bufflen < 8) { |
| break; |
| } |
| buf = localbuf; |
| disk_size = simscsi_get_disk_size(desc[target_id]); |
| |
| buf[0] = (disk_size >> 24) & 0xff; |
| buf[1] = (disk_size >> 16) & 0xff; |
| buf[2] = (disk_size >> 8) & 0xff; |
| buf[3] = (disk_size >> 0) & 0xff; |
| /* set block size of 512 bytes: */ |
| buf[4] = 0; |
| buf[5] = 0; |
| buf[6] = 2; |
| buf[7] = 0; |
| simscsi_fillresult(sc, buf, 8); |
| sc->result = GOOD; |
| break; |
| |
| case MODE_SENSE: |
| case MODE_SENSE_10: |
| /* sd.c uses this to determine whether disk does write-caching. */ |
| simscsi_fillresult(sc, (char *)empty_zero_page, sc->request_bufflen); |
| sc->result = GOOD; |
| break; |
| |
| case START_STOP: |
| printk(KERN_ERR "START_STOP\n"); |
| break; |
| |
| default: |
| panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]); |
| } |
| } |
| if (sc->result == DID_BAD_TARGET) { |
| sc->result |= DRIVER_SENSE << 24; |
| sc->sense_buffer[0] = 0x70; |
| sc->sense_buffer[2] = 0x00; |
| } |
| if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) { |
| panic("Attempt to queue command while command is pending!!"); |
| } |
| atomic_inc(&num_reqs); |
| queue[wr].sc = sc; |
| wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN; |
| |
| tasklet_schedule(&simscsi_tasklet); |
| return 0; |
| } |
| |
| static int |
| simscsi_host_reset (struct scsi_cmnd *sc) |
| { |
| printk(KERN_ERR "simscsi_host_reset: not implemented\n"); |
| return 0; |
| } |
| |
| static struct scsi_host_template driver_template = { |
| .name = "simulated SCSI host adapter", |
| .proc_name = "simscsi", |
| .queuecommand = simscsi_queuecommand, |
| .eh_host_reset_handler = simscsi_host_reset, |
| .bios_param = simscsi_biosparam, |
| .can_queue = SIMSCSI_REQ_QUEUE_LEN, |
| .this_id = -1, |
| .sg_tablesize = SG_ALL, |
| .max_sectors = 1024, |
| .cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN, |
| .use_clustering = DISABLE_CLUSTERING, |
| }; |
| |
| static int __init |
| simscsi_init(void) |
| { |
| int error; |
| |
| host = scsi_host_alloc(&driver_template, 0); |
| if (!host) |
| return -ENOMEM; |
| |
| error = scsi_add_host(host, NULL); |
| if (!error) |
| scsi_scan_host(host); |
| return error; |
| } |
| |
| static void __exit |
| simscsi_exit(void) |
| { |
| scsi_remove_host(host); |
| scsi_host_put(host); |
| } |
| |
| module_init(simscsi_init); |
| module_exit(simscsi_exit); |