| /* |
| * Copyright (C) 2001 Allan Trautman, IBM Corporation |
| * |
| * iSeries specific routines for PCI. |
| * |
| * Based on code from pci.c and iSeries_pci.c 32bit |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/ide.h> |
| #include <linux/pci.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/prom.h> |
| #include <asm/machdep.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/iommu.h> |
| #include <asm/abs_addr.h> |
| #include <asm/firmware.h> |
| |
| #include <asm/iseries/hv_call_xm.h> |
| #include <asm/iseries/mf.h> |
| #include <asm/iseries/iommu.h> |
| |
| #include <asm/ppc-pci.h> |
| |
| #include "irq.h" |
| #include "pci.h" |
| #include "call_pci.h" |
| |
| /* |
| * Forward declares of prototypes. |
| */ |
| static struct device_node *find_Device_Node(int bus, int devfn); |
| |
| static int Pci_Retry_Max = 3; /* Only retry 3 times */ |
| static int Pci_Error_Flag = 1; /* Set Retry Error on. */ |
| |
| static struct pci_ops iSeries_pci_ops; |
| |
| /* |
| * Table defines |
| * Each Entry size is 4 MB * 1024 Entries = 4GB I/O address space. |
| */ |
| #define IOMM_TABLE_MAX_ENTRIES 1024 |
| #define IOMM_TABLE_ENTRY_SIZE 0x0000000000400000UL |
| #define BASE_IO_MEMORY 0xE000000000000000UL |
| |
| static unsigned long max_io_memory = BASE_IO_MEMORY; |
| static long current_iomm_table_entry; |
| |
| /* |
| * Lookup Tables. |
| */ |
| static struct device_node *iomm_table[IOMM_TABLE_MAX_ENTRIES]; |
| static u8 iobar_table[IOMM_TABLE_MAX_ENTRIES]; |
| |
| static const char pci_io_text[] = "iSeries PCI I/O"; |
| static DEFINE_SPINLOCK(iomm_table_lock); |
| |
| /* |
| * iomm_table_allocate_entry |
| * |
| * Adds pci_dev entry in address translation table |
| * |
| * - Allocates the number of entries required in table base on BAR |
| * size. |
| * - Allocates starting at BASE_IO_MEMORY and increases. |
| * - The size is round up to be a multiple of entry size. |
| * - CurrentIndex is incremented to keep track of the last entry. |
| * - Builds the resource entry for allocated BARs. |
| */ |
| static void iomm_table_allocate_entry(struct pci_dev *dev, int bar_num) |
| { |
| struct resource *bar_res = &dev->resource[bar_num]; |
| long bar_size = pci_resource_len(dev, bar_num); |
| |
| /* |
| * No space to allocate, quick exit, skip Allocation. |
| */ |
| if (bar_size == 0) |
| return; |
| /* |
| * Set Resource values. |
| */ |
| spin_lock(&iomm_table_lock); |
| bar_res->name = pci_io_text; |
| bar_res->start = BASE_IO_MEMORY + |
| IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry; |
| bar_res->end = bar_res->start + bar_size - 1; |
| /* |
| * Allocate the number of table entries needed for BAR. |
| */ |
| while (bar_size > 0 ) { |
| iomm_table[current_iomm_table_entry] = dev->sysdata; |
| iobar_table[current_iomm_table_entry] = bar_num; |
| bar_size -= IOMM_TABLE_ENTRY_SIZE; |
| ++current_iomm_table_entry; |
| } |
| max_io_memory = BASE_IO_MEMORY + |
| IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry; |
| spin_unlock(&iomm_table_lock); |
| } |
| |
| /* |
| * allocate_device_bars |
| * |
| * - Allocates ALL pci_dev BAR's and updates the resources with the |
| * BAR value. BARS with zero length will have the resources |
| * The HvCallPci_getBarParms is used to get the size of the BAR |
| * space. It calls iomm_table_allocate_entry to allocate |
| * each entry. |
| * - Loops through The Bar resources(0 - 5) including the ROM |
| * is resource(6). |
| */ |
| static void allocate_device_bars(struct pci_dev *dev) |
| { |
| int bar_num; |
| |
| for (bar_num = 0; bar_num <= PCI_ROM_RESOURCE; ++bar_num) |
| iomm_table_allocate_entry(dev, bar_num); |
| } |
| |
| /* |
| * Log error information to system console. |
| * Filter out the device not there errors. |
| * PCI: EADs Connect Failed 0x18.58.10 Rc: 0x00xx |
| * PCI: Read Vendor Failed 0x18.58.10 Rc: 0x00xx |
| * PCI: Connect Bus Unit Failed 0x18.58.10 Rc: 0x00xx |
| */ |
| static void pci_Log_Error(char *Error_Text, int Bus, int SubBus, |
| int AgentId, int HvRc) |
| { |
| if (HvRc == 0x0302) |
| return; |
| printk(KERN_ERR "PCI: %s Failed: 0x%02X.%02X.%02X Rc: 0x%04X", |
| Error_Text, Bus, SubBus, AgentId, HvRc); |
| } |
| |
| /* |
| * iSeries_pci_final_fixup(void) |
| */ |
| void __init iSeries_pci_final_fixup(void) |
| { |
| struct pci_dev *pdev = NULL; |
| struct device_node *node; |
| int DeviceCount = 0; |
| |
| /* Fix up at the device node and pci_dev relationship */ |
| mf_display_src(0xC9000100); |
| |
| printk("pcibios_final_fixup\n"); |
| for_each_pci_dev(pdev) { |
| node = find_Device_Node(pdev->bus->number, pdev->devfn); |
| printk("pci dev %p (%x.%x), node %p\n", pdev, |
| pdev->bus->number, pdev->devfn, node); |
| |
| if (node != NULL) { |
| struct pci_dn *pdn = PCI_DN(node); |
| const u32 *agent; |
| |
| agent = get_property(node, "linux,agent-id", NULL); |
| if ((pdn != NULL) && (agent != NULL)) { |
| u8 irq = iSeries_allocate_IRQ(pdn->busno, 0, |
| pdn->bussubno); |
| int err; |
| |
| err = HvCallXm_connectBusUnit(pdn->busno, pdn->bussubno, |
| *agent, irq); |
| if (err) |
| pci_Log_Error("Connect Bus Unit", |
| pdn->busno, pdn->bussubno, *agent, err); |
| else { |
| err = HvCallPci_configStore8(pdn->busno, pdn->bussubno, |
| *agent, |
| PCI_INTERRUPT_LINE, |
| irq); |
| if (err) |
| pci_Log_Error("PciCfgStore Irq Failed!", |
| pdn->busno, pdn->bussubno, *agent, err); |
| } |
| if (!err) |
| pdev->irq = irq; |
| } |
| |
| ++DeviceCount; |
| pdev->sysdata = (void *)node; |
| PCI_DN(node)->pcidev = pdev; |
| allocate_device_bars(pdev); |
| iSeries_Device_Information(pdev, DeviceCount); |
| iommu_devnode_init_iSeries(pdev, node); |
| } else |
| printk("PCI: Device Tree not found for 0x%016lX\n", |
| (unsigned long)pdev); |
| } |
| iSeries_activate_IRQs(); |
| mf_display_src(0xC9000200); |
| } |
| |
| /* |
| * Look down the chain to find the matching Device Device |
| */ |
| static struct device_node *find_Device_Node(int bus, int devfn) |
| { |
| struct device_node *node; |
| |
| for (node = NULL; (node = of_find_all_nodes(node)); ) { |
| struct pci_dn *pdn = PCI_DN(node); |
| |
| if (pdn && (bus == pdn->busno) && (devfn == pdn->devfn)) |
| return node; |
| } |
| return NULL; |
| } |
| |
| #if 0 |
| /* |
| * Returns the device node for the passed pci_dev |
| * Sanity Check Node PciDev to passed pci_dev |
| * If none is found, returns a NULL which the client must handle. |
| */ |
| static struct device_node *get_Device_Node(struct pci_dev *pdev) |
| { |
| struct device_node *node; |
| |
| node = pdev->sysdata; |
| if (node == NULL || PCI_DN(node)->pcidev != pdev) |
| node = find_Device_Node(pdev->bus->number, pdev->devfn); |
| return node; |
| } |
| #endif |
| |
| /* |
| * Config space read and write functions. |
| * For now at least, we look for the device node for the bus and devfn |
| * that we are asked to access. It may be possible to translate the devfn |
| * to a subbus and deviceid more directly. |
| */ |
| static u64 hv_cfg_read_func[4] = { |
| HvCallPciConfigLoad8, HvCallPciConfigLoad16, |
| HvCallPciConfigLoad32, HvCallPciConfigLoad32 |
| }; |
| |
| static u64 hv_cfg_write_func[4] = { |
| HvCallPciConfigStore8, HvCallPciConfigStore16, |
| HvCallPciConfigStore32, HvCallPciConfigStore32 |
| }; |
| |
| /* |
| * Read PCI config space |
| */ |
| static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int size, u32 *val) |
| { |
| struct device_node *node = find_Device_Node(bus->number, devfn); |
| u64 fn; |
| struct HvCallPci_LoadReturn ret; |
| |
| if (node == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (offset > 255) { |
| *val = ~0; |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| } |
| |
| fn = hv_cfg_read_func[(size - 1) & 3]; |
| HvCall3Ret16(fn, &ret, iseries_ds_addr(node), offset, 0); |
| |
| if (ret.rc != 0) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; /* or something */ |
| } |
| |
| *val = ret.value; |
| return 0; |
| } |
| |
| /* |
| * Write PCI config space |
| */ |
| |
| static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int size, u32 val) |
| { |
| struct device_node *node = find_Device_Node(bus->number, devfn); |
| u64 fn; |
| u64 ret; |
| |
| if (node == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (offset > 255) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| fn = hv_cfg_write_func[(size - 1) & 3]; |
| ret = HvCall4(fn, iseries_ds_addr(node), offset, val, 0); |
| |
| if (ret != 0) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| return 0; |
| } |
| |
| static struct pci_ops iSeries_pci_ops = { |
| .read = iSeries_pci_read_config, |
| .write = iSeries_pci_write_config |
| }; |
| |
| /* |
| * Check Return Code |
| * -> On Failure, print and log information. |
| * Increment Retry Count, if exceeds max, panic partition. |
| * |
| * PCI: Device 23.90 ReadL I/O Error( 0): 0x1234 |
| * PCI: Device 23.90 ReadL Retry( 1) |
| * PCI: Device 23.90 ReadL Retry Successful(1) |
| */ |
| static int CheckReturnCode(char *TextHdr, struct device_node *DevNode, |
| int *retry, u64 ret) |
| { |
| if (ret != 0) { |
| struct pci_dn *pdn = PCI_DN(DevNode); |
| |
| (*retry)++; |
| printk("PCI: %s: Device 0x%04X:%02X I/O Error(%2d): 0x%04X\n", |
| TextHdr, pdn->busno, pdn->devfn, |
| *retry, (int)ret); |
| /* |
| * Bump the retry and check for retry count exceeded. |
| * If, Exceeded, panic the system. |
| */ |
| if (((*retry) > Pci_Retry_Max) && |
| (Pci_Error_Flag > 0)) { |
| mf_display_src(0xB6000103); |
| panic_timeout = 0; |
| panic("PCI: Hardware I/O Error, SRC B6000103, " |
| "Automatic Reboot Disabled.\n"); |
| } |
| return -1; /* Retry Try */ |
| } |
| return 0; |
| } |
| |
| /* |
| * Translate the I/O Address into a device node, bar, and bar offset. |
| * Note: Make sure the passed variable end up on the stack to avoid |
| * the exposure of being device global. |
| */ |
| static inline struct device_node *xlate_iomm_address( |
| const volatile void __iomem *IoAddress, |
| u64 *dsaptr, u64 *BarOffsetPtr) |
| { |
| unsigned long OrigIoAddr; |
| unsigned long BaseIoAddr; |
| unsigned long TableIndex; |
| struct device_node *DevNode; |
| |
| OrigIoAddr = (unsigned long __force)IoAddress; |
| if ((OrigIoAddr < BASE_IO_MEMORY) || (OrigIoAddr >= max_io_memory)) |
| return NULL; |
| BaseIoAddr = OrigIoAddr - BASE_IO_MEMORY; |
| TableIndex = BaseIoAddr / IOMM_TABLE_ENTRY_SIZE; |
| DevNode = iomm_table[TableIndex]; |
| |
| if (DevNode != NULL) { |
| int barnum = iobar_table[TableIndex]; |
| *dsaptr = iseries_ds_addr(DevNode) | (barnum << 24); |
| *BarOffsetPtr = BaseIoAddr % IOMM_TABLE_ENTRY_SIZE; |
| } else |
| panic("PCI: Invalid PCI IoAddress detected!\n"); |
| return DevNode; |
| } |
| |
| /* |
| * Read MM I/O Instructions for the iSeries |
| * On MM I/O error, all ones are returned and iSeries_pci_IoError is cal |
| * else, data is returned in Big Endian format. |
| */ |
| static u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress) |
| { |
| u64 BarOffset; |
| u64 dsa; |
| int retry = 0; |
| struct HvCallPci_LoadReturn ret; |
| struct device_node *DevNode = |
| xlate_iomm_address(IoAddress, &dsa, &BarOffset); |
| |
| if (DevNode == NULL) { |
| static unsigned long last_jiffies; |
| static int num_printed; |
| |
| if ((jiffies - last_jiffies) > 60 * HZ) { |
| last_jiffies = jiffies; |
| num_printed = 0; |
| } |
| if (num_printed++ < 10) |
| printk(KERN_ERR "iSeries_Read_Byte: invalid access at IO address %p\n", |
| IoAddress); |
| return 0xff; |
| } |
| do { |
| HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0); |
| } while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0); |
| |
| return ret.value; |
| } |
| |
| static u16 iSeries_Read_Word(const volatile void __iomem *IoAddress) |
| { |
| u64 BarOffset; |
| u64 dsa; |
| int retry = 0; |
| struct HvCallPci_LoadReturn ret; |
| struct device_node *DevNode = |
| xlate_iomm_address(IoAddress, &dsa, &BarOffset); |
| |
| if (DevNode == NULL) { |
| static unsigned long last_jiffies; |
| static int num_printed; |
| |
| if ((jiffies - last_jiffies) > 60 * HZ) { |
| last_jiffies = jiffies; |
| num_printed = 0; |
| } |
| if (num_printed++ < 10) |
| printk(KERN_ERR "iSeries_Read_Word: invalid access at IO address %p\n", |
| IoAddress); |
| return 0xffff; |
| } |
| do { |
| HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa, |
| BarOffset, 0); |
| } while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0); |
| |
| return ret.value; |
| } |
| |
| static u32 iSeries_Read_Long(const volatile void __iomem *IoAddress) |
| { |
| u64 BarOffset; |
| u64 dsa; |
| int retry = 0; |
| struct HvCallPci_LoadReturn ret; |
| struct device_node *DevNode = |
| xlate_iomm_address(IoAddress, &dsa, &BarOffset); |
| |
| if (DevNode == NULL) { |
| static unsigned long last_jiffies; |
| static int num_printed; |
| |
| if ((jiffies - last_jiffies) > 60 * HZ) { |
| last_jiffies = jiffies; |
| num_printed = 0; |
| } |
| if (num_printed++ < 10) |
| printk(KERN_ERR "iSeries_Read_Long: invalid access at IO address %p\n", |
| IoAddress); |
| return 0xffffffff; |
| } |
| do { |
| HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa, |
| BarOffset, 0); |
| } while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0); |
| |
| return ret.value; |
| } |
| |
| /* |
| * Write MM I/O Instructions for the iSeries |
| * |
| */ |
| static void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress) |
| { |
| u64 BarOffset; |
| u64 dsa; |
| int retry = 0; |
| u64 rc; |
| struct device_node *DevNode = |
| xlate_iomm_address(IoAddress, &dsa, &BarOffset); |
| |
| if (DevNode == NULL) { |
| static unsigned long last_jiffies; |
| static int num_printed; |
| |
| if ((jiffies - last_jiffies) > 60 * HZ) { |
| last_jiffies = jiffies; |
| num_printed = 0; |
| } |
| if (num_printed++ < 10) |
| printk(KERN_ERR "iSeries_Write_Byte: invalid access at IO address %p\n", IoAddress); |
| return; |
| } |
| do { |
| rc = HvCall4(HvCallPciBarStore8, dsa, BarOffset, data, 0); |
| } while (CheckReturnCode("WWB", DevNode, &retry, rc) != 0); |
| } |
| |
| static void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress) |
| { |
| u64 BarOffset; |
| u64 dsa; |
| int retry = 0; |
| u64 rc; |
| struct device_node *DevNode = |
| xlate_iomm_address(IoAddress, &dsa, &BarOffset); |
| |
| if (DevNode == NULL) { |
| static unsigned long last_jiffies; |
| static int num_printed; |
| |
| if ((jiffies - last_jiffies) > 60 * HZ) { |
| last_jiffies = jiffies; |
| num_printed = 0; |
| } |
| if (num_printed++ < 10) |
| printk(KERN_ERR "iSeries_Write_Word: invalid access at IO address %p\n", |
| IoAddress); |
| return; |
| } |
| do { |
| rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, data, 0); |
| } while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0); |
| } |
| |
| static void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress) |
| { |
| u64 BarOffset; |
| u64 dsa; |
| int retry = 0; |
| u64 rc; |
| struct device_node *DevNode = |
| xlate_iomm_address(IoAddress, &dsa, &BarOffset); |
| |
| if (DevNode == NULL) { |
| static unsigned long last_jiffies; |
| static int num_printed; |
| |
| if ((jiffies - last_jiffies) > 60 * HZ) { |
| last_jiffies = jiffies; |
| num_printed = 0; |
| } |
| if (num_printed++ < 10) |
| printk(KERN_ERR "iSeries_Write_Long: invalid access at IO address %p\n", |
| IoAddress); |
| return; |
| } |
| do { |
| rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, data, 0); |
| } while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0); |
| } |
| |
| static u8 iseries_readb(const volatile void __iomem *addr) |
| { |
| return iSeries_Read_Byte(addr); |
| } |
| |
| static u16 iseries_readw(const volatile void __iomem *addr) |
| { |
| return le16_to_cpu(iSeries_Read_Word(addr)); |
| } |
| |
| static u32 iseries_readl(const volatile void __iomem *addr) |
| { |
| return le32_to_cpu(iSeries_Read_Long(addr)); |
| } |
| |
| static u16 iseries_readw_be(const volatile void __iomem *addr) |
| { |
| return iSeries_Read_Word(addr); |
| } |
| |
| static u32 iseries_readl_be(const volatile void __iomem *addr) |
| { |
| return iSeries_Read_Long(addr); |
| } |
| |
| static void iseries_writeb(u8 data, volatile void __iomem *addr) |
| { |
| iSeries_Write_Byte(data, addr); |
| } |
| |
| static void iseries_writew(u16 data, volatile void __iomem *addr) |
| { |
| iSeries_Write_Word(cpu_to_le16(data), addr); |
| } |
| |
| static void iseries_writel(u32 data, volatile void __iomem *addr) |
| { |
| iSeries_Write_Long(cpu_to_le32(data), addr); |
| } |
| |
| static void iseries_writew_be(u16 data, volatile void __iomem *addr) |
| { |
| iSeries_Write_Word(data, addr); |
| } |
| |
| static void iseries_writel_be(u32 data, volatile void __iomem *addr) |
| { |
| iSeries_Write_Long(data, addr); |
| } |
| |
| static void iseries_readsb(const volatile void __iomem *addr, void *buf, |
| unsigned long count) |
| { |
| u8 *dst = buf; |
| while(count-- > 0) |
| *(dst++) = iSeries_Read_Byte(addr); |
| } |
| |
| static void iseries_readsw(const volatile void __iomem *addr, void *buf, |
| unsigned long count) |
| { |
| u16 *dst = buf; |
| while(count-- > 0) |
| *(dst++) = iSeries_Read_Word(addr); |
| } |
| |
| static void iseries_readsl(const volatile void __iomem *addr, void *buf, |
| unsigned long count) |
| { |
| u32 *dst = buf; |
| while(count-- > 0) |
| *(dst++) = iSeries_Read_Long(addr); |
| } |
| |
| static void iseries_writesb(volatile void __iomem *addr, const void *buf, |
| unsigned long count) |
| { |
| const u8 *src = buf; |
| while(count-- > 0) |
| iSeries_Write_Byte(*(src++), addr); |
| } |
| |
| static void iseries_writesw(volatile void __iomem *addr, const void *buf, |
| unsigned long count) |
| { |
| const u16 *src = buf; |
| while(count-- > 0) |
| iSeries_Write_Word(*(src++), addr); |
| } |
| |
| static void iseries_writesl(volatile void __iomem *addr, const void *buf, |
| unsigned long count) |
| { |
| const u32 *src = buf; |
| while(count-- > 0) |
| iSeries_Write_Long(*(src++), addr); |
| } |
| |
| static void iseries_memset_io(volatile void __iomem *addr, int c, |
| unsigned long n) |
| { |
| volatile char __iomem *d = addr; |
| |
| while (n-- > 0) |
| iSeries_Write_Byte(c, d++); |
| } |
| |
| static void iseries_memcpy_fromio(void *dest, const volatile void __iomem *src, |
| unsigned long n) |
| { |
| char *d = dest; |
| const volatile char __iomem *s = src; |
| |
| while (n-- > 0) |
| *d++ = iSeries_Read_Byte(s++); |
| } |
| |
| static void iseries_memcpy_toio(volatile void __iomem *dest, const void *src, |
| unsigned long n) |
| { |
| const char *s = src; |
| volatile char __iomem *d = dest; |
| |
| while (n-- > 0) |
| iSeries_Write_Byte(*s++, d++); |
| } |
| |
| /* We only set MMIO ops. The default PIO ops will be default |
| * to the MMIO ops + pci_io_base which is 0 on iSeries as |
| * expected so both should work. |
| * |
| * Note that we don't implement the readq/writeq versions as |
| * I don't know of an HV call for doing so. Thus, the default |
| * operation will be used instead, which will fault a the value |
| * return by iSeries for MMIO addresses always hits a non mapped |
| * area. This is as good as the BUG() we used to have there. |
| */ |
| static struct ppc_pci_io __initdata iseries_pci_io = { |
| .readb = iseries_readb, |
| .readw = iseries_readw, |
| .readl = iseries_readl, |
| .readw_be = iseries_readw_be, |
| .readl_be = iseries_readl_be, |
| .writeb = iseries_writeb, |
| .writew = iseries_writew, |
| .writel = iseries_writel, |
| .writew_be = iseries_writew_be, |
| .writel_be = iseries_writel_be, |
| .readsb = iseries_readsb, |
| .readsw = iseries_readsw, |
| .readsl = iseries_readsl, |
| .writesb = iseries_writesb, |
| .writesw = iseries_writesw, |
| .writesl = iseries_writesl, |
| .memset_io = iseries_memset_io, |
| .memcpy_fromio = iseries_memcpy_fromio, |
| .memcpy_toio = iseries_memcpy_toio, |
| }; |
| |
| /* |
| * iSeries_pcibios_init |
| * |
| * Description: |
| * This function checks for all possible system PCI host bridges that connect |
| * PCI buses. The system hypervisor is queried as to the guest partition |
| * ownership status. A pci_controller is built for any bus which is partially |
| * owned or fully owned by this guest partition. |
| */ |
| void __init iSeries_pcibios_init(void) |
| { |
| struct pci_controller *phb; |
| struct device_node *root = of_find_node_by_path("/"); |
| struct device_node *node = NULL; |
| |
| /* Install IO hooks */ |
| ppc_pci_io = iseries_pci_io; |
| |
| if (root == NULL) { |
| printk(KERN_CRIT "iSeries_pcibios_init: can't find root " |
| "of device tree\n"); |
| return; |
| } |
| while ((node = of_get_next_child(root, node)) != NULL) { |
| HvBusNumber bus; |
| const u32 *busp; |
| |
| if ((node->type == NULL) || (strcmp(node->type, "pci") != 0)) |
| continue; |
| |
| busp = get_property(node, "bus-range", NULL); |
| if (busp == NULL) |
| continue; |
| bus = *busp; |
| printk("bus %d appears to exist\n", bus); |
| phb = pcibios_alloc_controller(node); |
| if (phb == NULL) |
| continue; |
| |
| phb->pci_mem_offset = phb->local_number = bus; |
| phb->first_busno = bus; |
| phb->last_busno = bus; |
| phb->ops = &iSeries_pci_ops; |
| } |
| |
| of_node_put(root); |
| |
| pci_devs_phb_init(); |
| } |
| |