| /* |
| * GPIO driver for AMD 8111 south bridges |
| * |
| * Copyright (c) 2012 Dmitry Eremin-Solenikov |
| * |
| * Based on the AMD RNG driver: |
| * Copyright 2005 (c) MontaVista Software, Inc. |
| * with the majority of the code coming from: |
| * |
| * Hardware driver for the Intel/AMD/VIA Random Number Generators (RNG) |
| * (c) Copyright 2003 Red Hat Inc <jgarzik@redhat.com> |
| * |
| * derived from |
| * |
| * Hardware driver for the AMD 768 Random Number Generator (RNG) |
| * (c) Copyright 2001 Red Hat Inc |
| * |
| * derived from |
| * |
| * Hardware driver for Intel i810 Random Number Generator (RNG) |
| * Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com> |
| * Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/gpio.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| |
| #define PMBASE_OFFSET 0xb0 |
| #define PMBASE_SIZE 0x30 |
| |
| #define AMD_REG_GPIO(i) (0x10 + (i)) |
| |
| #define AMD_GPIO_LTCH_STS 0x40 /* Latch status, w1 */ |
| #define AMD_GPIO_RTIN 0x20 /* Real Time in, ro */ |
| #define AMD_GPIO_DEBOUNCE 0x10 /* Debounce, rw */ |
| #define AMD_GPIO_MODE_MASK 0x0c /* Pin Mode Select, rw */ |
| #define AMD_GPIO_MODE_IN 0x00 |
| #define AMD_GPIO_MODE_OUT 0x04 |
| /* Enable alternative (e.g. clkout, IRQ, etc) function of the pin */ |
| #define AMD_GPIO_MODE_ALTFN 0x08 /* Or 0x09 */ |
| #define AMD_GPIO_X_MASK 0x03 /* In/Out specific, rw */ |
| #define AMD_GPIO_X_IN_ACTIVEHI 0x01 /* Active High */ |
| #define AMD_GPIO_X_IN_LATCH 0x02 /* Latched version is selected */ |
| #define AMD_GPIO_X_OUT_LOW 0x00 |
| #define AMD_GPIO_X_OUT_HI 0x01 |
| #define AMD_GPIO_X_OUT_CLK0 0x02 |
| #define AMD_GPIO_X_OUT_CLK1 0x03 |
| |
| /* |
| * Data for PCI driver interface |
| * |
| * This data only exists for exporting the supported |
| * PCI ids via MODULE_DEVICE_TABLE. We do not actually |
| * register a pci_driver, because someone else might one day |
| * want to register another driver on the same PCI id. |
| */ |
| static const struct pci_device_id pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), 0 }, |
| { 0, }, /* terminate list */ |
| }; |
| MODULE_DEVICE_TABLE(pci, pci_tbl); |
| |
| struct amd_gpio { |
| struct gpio_chip chip; |
| u32 pmbase; |
| void __iomem *pm; |
| struct pci_dev *pdev; |
| spinlock_t lock; /* guards hw registers and orig table */ |
| u8 orig[32]; |
| }; |
| |
| static int amd_gpio_request(struct gpio_chip *chip, unsigned offset) |
| { |
| struct amd_gpio *agp = gpiochip_get_data(chip); |
| |
| agp->orig[offset] = ioread8(agp->pm + AMD_REG_GPIO(offset)) & |
| (AMD_GPIO_DEBOUNCE | AMD_GPIO_MODE_MASK | AMD_GPIO_X_MASK); |
| |
| dev_dbg(&agp->pdev->dev, "Requested gpio %d, data %x\n", offset, agp->orig[offset]); |
| |
| return 0; |
| } |
| |
| static void amd_gpio_free(struct gpio_chip *chip, unsigned offset) |
| { |
| struct amd_gpio *agp = gpiochip_get_data(chip); |
| |
| dev_dbg(&agp->pdev->dev, "Freed gpio %d, data %x\n", offset, agp->orig[offset]); |
| |
| iowrite8(agp->orig[offset], agp->pm + AMD_REG_GPIO(offset)); |
| } |
| |
| static void amd_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct amd_gpio *agp = gpiochip_get_data(chip); |
| u8 temp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&agp->lock, flags); |
| temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); |
| temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW); |
| iowrite8(temp, agp->pm + AMD_REG_GPIO(offset)); |
| spin_unlock_irqrestore(&agp->lock, flags); |
| |
| dev_dbg(&agp->pdev->dev, "Setting gpio %d, value %d, reg=%02x\n", offset, !!value, temp); |
| } |
| |
| static int amd_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct amd_gpio *agp = gpiochip_get_data(chip); |
| u8 temp; |
| |
| temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); |
| |
| dev_dbg(&agp->pdev->dev, "Getting gpio %d, reg=%02x\n", offset, temp); |
| |
| return (temp & AMD_GPIO_RTIN) ? 1 : 0; |
| } |
| |
| static int amd_gpio_dirout(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct amd_gpio *agp = gpiochip_get_data(chip); |
| u8 temp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&agp->lock, flags); |
| temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); |
| temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW); |
| iowrite8(temp, agp->pm + AMD_REG_GPIO(offset)); |
| spin_unlock_irqrestore(&agp->lock, flags); |
| |
| dev_dbg(&agp->pdev->dev, "Dirout gpio %d, value %d, reg=%02x\n", offset, !!value, temp); |
| |
| return 0; |
| } |
| |
| static int amd_gpio_dirin(struct gpio_chip *chip, unsigned offset) |
| { |
| struct amd_gpio *agp = gpiochip_get_data(chip); |
| u8 temp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&agp->lock, flags); |
| temp = ioread8(agp->pm + AMD_REG_GPIO(offset)); |
| temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_IN; |
| iowrite8(temp, agp->pm + AMD_REG_GPIO(offset)); |
| spin_unlock_irqrestore(&agp->lock, flags); |
| |
| dev_dbg(&agp->pdev->dev, "Dirin gpio %d, reg=%02x\n", offset, temp); |
| |
| return 0; |
| } |
| |
| static struct amd_gpio gp = { |
| .chip = { |
| .label = "AMD GPIO", |
| .owner = THIS_MODULE, |
| .base = -1, |
| .ngpio = 32, |
| .request = amd_gpio_request, |
| .free = amd_gpio_free, |
| .set = amd_gpio_set, |
| .get = amd_gpio_get, |
| .direction_output = amd_gpio_dirout, |
| .direction_input = amd_gpio_dirin, |
| }, |
| }; |
| |
| static int __init amd_gpio_init(void) |
| { |
| int err = -ENODEV; |
| struct pci_dev *pdev = NULL; |
| const struct pci_device_id *ent; |
| |
| |
| /* We look for our device - AMD South Bridge |
| * I don't know about a system with two such bridges, |
| * so we can assume that there is max. one device. |
| * |
| * We can't use plain pci_driver mechanism, |
| * as the device is really a multiple function device, |
| * main driver that binds to the pci_device is an smbus |
| * driver and have to find & bind to the device this way. |
| */ |
| for_each_pci_dev(pdev) { |
| ent = pci_match_id(pci_tbl, pdev); |
| if (ent) |
| goto found; |
| } |
| /* Device not found. */ |
| goto out; |
| |
| found: |
| err = pci_read_config_dword(pdev, 0x58, &gp.pmbase); |
| if (err) |
| goto out; |
| err = -EIO; |
| gp.pmbase &= 0x0000FF00; |
| if (gp.pmbase == 0) |
| goto out; |
| if (!request_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE, "AMD GPIO")) { |
| dev_err(&pdev->dev, "AMD GPIO region 0x%x already in use!\n", |
| gp.pmbase + PMBASE_OFFSET); |
| err = -EBUSY; |
| goto out; |
| } |
| gp.pm = ioport_map(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE); |
| if (!gp.pm) { |
| dev_err(&pdev->dev, "Couldn't map io port into io memory\n"); |
| release_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE); |
| err = -ENOMEM; |
| goto out; |
| } |
| gp.pdev = pdev; |
| gp.chip.parent = &pdev->dev; |
| |
| spin_lock_init(&gp.lock); |
| |
| printk(KERN_INFO "AMD-8111 GPIO detected\n"); |
| err = gpiochip_add_data(&gp.chip, &gp); |
| if (err) { |
| printk(KERN_ERR "GPIO registering failed (%d)\n", |
| err); |
| ioport_unmap(gp.pm); |
| release_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE); |
| goto out; |
| } |
| out: |
| return err; |
| } |
| |
| static void __exit amd_gpio_exit(void) |
| { |
| gpiochip_remove(&gp.chip); |
| ioport_unmap(gp.pm); |
| release_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE); |
| } |
| |
| module_init(amd_gpio_init); |
| module_exit(amd_gpio_exit); |
| |
| MODULE_AUTHOR("The Linux Kernel team"); |
| MODULE_DESCRIPTION("GPIO driver for AMD chipsets"); |
| MODULE_LICENSE("GPL"); |