| /* |
| * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. |
| * Copyright (c) 2014, Sony Mobile Communications Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/log2.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/reboot.h> |
| #include <linux/regmap.h> |
| |
| #define PON_REV2 0x01 |
| |
| #define PON_RT_STS 0x10 |
| #define PON_KPDPWR_N_SET BIT(0) |
| |
| #define PON_PS_HOLD_RST_CTL 0x5a |
| #define PON_PS_HOLD_RST_CTL2 0x5b |
| #define PON_PS_HOLD_ENABLE BIT(7) |
| #define PON_PS_HOLD_TYPE_MASK 0x0f |
| #define PON_PS_HOLD_TYPE_SHUTDOWN 4 |
| #define PON_PS_HOLD_TYPE_HARD_RESET 7 |
| |
| #define PON_PULL_CTL 0x70 |
| #define PON_KPDPWR_PULL_UP BIT(1) |
| |
| #define PON_DBC_CTL 0x71 |
| #define PON_DBC_DELAY_MASK 0x7 |
| |
| |
| struct pm8941_pwrkey { |
| struct device *dev; |
| int irq; |
| u32 baseaddr; |
| struct regmap *regmap; |
| struct input_dev *input; |
| |
| unsigned int revision; |
| struct notifier_block reboot_notifier; |
| }; |
| |
| static int pm8941_reboot_notify(struct notifier_block *nb, |
| unsigned long code, void *unused) |
| { |
| struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey, |
| reboot_notifier); |
| unsigned int enable_reg; |
| unsigned int reset_type; |
| int error; |
| |
| /* PMICs with revision 0 have the enable bit in same register as ctrl */ |
| if (pwrkey->revision == 0) |
| enable_reg = PON_PS_HOLD_RST_CTL; |
| else |
| enable_reg = PON_PS_HOLD_RST_CTL2; |
| |
| error = regmap_update_bits(pwrkey->regmap, |
| pwrkey->baseaddr + enable_reg, |
| PON_PS_HOLD_ENABLE, |
| 0); |
| if (error) |
| dev_err(pwrkey->dev, |
| "unable to clear ps hold reset enable: %d\n", |
| error); |
| |
| /* |
| * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between |
| * writes. |
| */ |
| usleep_range(100, 1000); |
| |
| switch (code) { |
| case SYS_HALT: |
| case SYS_POWER_OFF: |
| reset_type = PON_PS_HOLD_TYPE_SHUTDOWN; |
| break; |
| case SYS_RESTART: |
| default: |
| reset_type = PON_PS_HOLD_TYPE_HARD_RESET; |
| break; |
| } |
| |
| error = regmap_update_bits(pwrkey->regmap, |
| pwrkey->baseaddr + PON_PS_HOLD_RST_CTL, |
| PON_PS_HOLD_TYPE_MASK, |
| reset_type); |
| if (error) |
| dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n", |
| error); |
| |
| error = regmap_update_bits(pwrkey->regmap, |
| pwrkey->baseaddr + enable_reg, |
| PON_PS_HOLD_ENABLE, |
| PON_PS_HOLD_ENABLE); |
| if (error) |
| dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data) |
| { |
| struct pm8941_pwrkey *pwrkey = _data; |
| unsigned int sts; |
| int error; |
| |
| error = regmap_read(pwrkey->regmap, |
| pwrkey->baseaddr + PON_RT_STS, &sts); |
| if (error) |
| return IRQ_HANDLED; |
| |
| input_report_key(pwrkey->input, KEY_POWER, !!(sts & PON_KPDPWR_N_SET)); |
| input_sync(pwrkey->input); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev) |
| { |
| struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(pwrkey->irq); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused pm8941_pwrkey_resume(struct device *dev) |
| { |
| struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(pwrkey->irq); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops, |
| pm8941_pwrkey_suspend, pm8941_pwrkey_resume); |
| |
| static int pm8941_pwrkey_probe(struct platform_device *pdev) |
| { |
| struct pm8941_pwrkey *pwrkey; |
| bool pull_up; |
| u32 req_delay; |
| int error; |
| |
| if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay)) |
| req_delay = 15625; |
| |
| if (req_delay > 2000000 || req_delay == 0) { |
| dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay); |
| return -EINVAL; |
| } |
| |
| pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up"); |
| |
| pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL); |
| if (!pwrkey) |
| return -ENOMEM; |
| |
| pwrkey->dev = &pdev->dev; |
| |
| pwrkey->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!pwrkey->regmap) { |
| dev_err(&pdev->dev, "failed to locate regmap\n"); |
| return -ENODEV; |
| } |
| |
| pwrkey->irq = platform_get_irq(pdev, 0); |
| if (pwrkey->irq < 0) { |
| dev_err(&pdev->dev, "failed to get irq\n"); |
| return pwrkey->irq; |
| } |
| |
| error = of_property_read_u32(pdev->dev.of_node, "reg", |
| &pwrkey->baseaddr); |
| if (error) |
| return error; |
| |
| error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2, |
| &pwrkey->revision); |
| if (error) { |
| dev_err(&pdev->dev, "failed to set debounce: %d\n", error); |
| return error; |
| } |
| |
| pwrkey->input = devm_input_allocate_device(&pdev->dev); |
| if (!pwrkey->input) { |
| dev_dbg(&pdev->dev, "unable to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| input_set_capability(pwrkey->input, EV_KEY, KEY_POWER); |
| |
| pwrkey->input->name = "pm8941_pwrkey"; |
| pwrkey->input->phys = "pm8941_pwrkey/input0"; |
| |
| req_delay = (req_delay << 6) / USEC_PER_SEC; |
| req_delay = ilog2(req_delay); |
| |
| error = regmap_update_bits(pwrkey->regmap, |
| pwrkey->baseaddr + PON_DBC_CTL, |
| PON_DBC_DELAY_MASK, |
| req_delay); |
| if (error) { |
| dev_err(&pdev->dev, "failed to set debounce: %d\n", error); |
| return error; |
| } |
| |
| error = regmap_update_bits(pwrkey->regmap, |
| pwrkey->baseaddr + PON_PULL_CTL, |
| PON_KPDPWR_PULL_UP, |
| pull_up ? PON_KPDPWR_PULL_UP : 0); |
| if (error) { |
| dev_err(&pdev->dev, "failed to set pull: %d\n", error); |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq, |
| NULL, pm8941_pwrkey_irq, |
| IRQF_ONESHOT, |
| "pm8941_pwrkey", pwrkey); |
| if (error) { |
| dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error); |
| return error; |
| } |
| |
| error = input_register_device(pwrkey->input); |
| if (error) { |
| dev_err(&pdev->dev, "failed to register input device: %d\n", |
| error); |
| return error; |
| } |
| |
| pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify, |
| error = register_reboot_notifier(&pwrkey->reboot_notifier); |
| if (error) { |
| dev_err(&pdev->dev, "failed to register reboot notifier: %d\n", |
| error); |
| return error; |
| } |
| |
| platform_set_drvdata(pdev, pwrkey); |
| device_init_wakeup(&pdev->dev, 1); |
| |
| return 0; |
| } |
| |
| static int pm8941_pwrkey_remove(struct platform_device *pdev) |
| { |
| struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev); |
| |
| device_init_wakeup(&pdev->dev, 0); |
| unregister_reboot_notifier(&pwrkey->reboot_notifier); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id pm8941_pwr_key_id_table[] = { |
| { .compatible = "qcom,pm8941-pwrkey" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table); |
| |
| static struct platform_driver pm8941_pwrkey_driver = { |
| .probe = pm8941_pwrkey_probe, |
| .remove = pm8941_pwrkey_remove, |
| .driver = { |
| .name = "pm8941-pwrkey", |
| .pm = &pm8941_pwr_key_pm_ops, |
| .of_match_table = of_match_ptr(pm8941_pwr_key_id_table), |
| }, |
| }; |
| module_platform_driver(pm8941_pwrkey_driver); |
| |
| MODULE_DESCRIPTION("PM8941 Power Key driver"); |
| MODULE_LICENSE("GPL v2"); |