| /* |
| * Common data handling layer for ser_gigaset and usb_gigaset |
| * |
| * Copyright (c) 2005 by Tilman Schmidt <tilman@imap.cc>, |
| * Hansjoerg Lipp <hjlipp@web.de>, |
| * Stefan Eilers. |
| * |
| * ===================================================================== |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * ===================================================================== |
| */ |
| |
| #include "gigaset.h" |
| #include <linux/crc-ccitt.h> |
| #include <linux/bitrev.h> |
| #include <linux/export.h> |
| |
| /* check if byte must be stuffed/escaped |
| * I'm not sure which data should be encoded. |
| * Therefore I will go the hard way and encode every value |
| * less than 0x20, the flag sequence and the control escape char. |
| */ |
| static inline int muststuff(unsigned char c) |
| { |
| if (c < PPP_TRANS) return 1; |
| if (c == PPP_FLAG) return 1; |
| if (c == PPP_ESCAPE) return 1; |
| /* other possible candidates: */ |
| /* 0x91: XON with parity set */ |
| /* 0x93: XOFF with parity set */ |
| return 0; |
| } |
| |
| /* == data input =========================================================== */ |
| |
| /* process a block of received bytes in command mode |
| * (mstate != MS_LOCKED && (inputstate & INS_command)) |
| * Append received bytes to the command response buffer and forward them |
| * line by line to the response handler. Exit whenever a mode/state change |
| * might have occurred. |
| * Note: Received lines may be terminated by CR, LF, or CR LF, which will be |
| * removed before passing the line to the response handler. |
| * Return value: |
| * number of processed bytes |
| */ |
| static unsigned cmd_loop(unsigned numbytes, struct inbuf_t *inbuf) |
| { |
| unsigned char *src = inbuf->data + inbuf->head; |
| struct cardstate *cs = inbuf->cs; |
| unsigned cbytes = cs->cbytes; |
| unsigned procbytes = 0; |
| unsigned char c; |
| |
| while (procbytes < numbytes) { |
| c = *src++; |
| procbytes++; |
| |
| switch (c) { |
| case '\n': |
| if (cbytes == 0 && cs->respdata[0] == '\r') { |
| /* collapse LF with preceding CR */ |
| cs->respdata[0] = 0; |
| break; |
| } |
| /* --v-- fall through --v-- */ |
| case '\r': |
| /* end of message line, pass to response handler */ |
| if (cbytes >= MAX_RESP_SIZE) { |
| dev_warn(cs->dev, "response too large (%d)\n", |
| cbytes); |
| cbytes = MAX_RESP_SIZE; |
| } |
| cs->cbytes = cbytes; |
| gigaset_dbg_buffer(DEBUG_TRANSCMD, "received response", |
| cbytes, cs->respdata); |
| gigaset_handle_modem_response(cs); |
| cbytes = 0; |
| |
| /* store EOL byte for CRLF collapsing */ |
| cs->respdata[0] = c; |
| |
| /* cs->dle may have changed */ |
| if (cs->dle && !(inbuf->inputstate & INS_DLE_command)) |
| inbuf->inputstate &= ~INS_command; |
| |
| /* return for reevaluating state */ |
| goto exit; |
| |
| case DLE_FLAG: |
| if (inbuf->inputstate & INS_DLE_char) { |
| /* quoted DLE: clear quote flag */ |
| inbuf->inputstate &= ~INS_DLE_char; |
| } else if (cs->dle || |
| (inbuf->inputstate & INS_DLE_command)) { |
| /* DLE escape, pass up for handling */ |
| inbuf->inputstate |= INS_DLE_char; |
| goto exit; |
| } |
| /* quoted or not in DLE mode: treat as regular data */ |
| /* --v-- fall through --v-- */ |
| default: |
| /* append to line buffer if possible */ |
| if (cbytes < MAX_RESP_SIZE) |
| cs->respdata[cbytes] = c; |
| cbytes++; |
| } |
| } |
| exit: |
| cs->cbytes = cbytes; |
| return procbytes; |
| } |
| |
| /* process a block of received bytes in lock mode |
| * All received bytes are passed unmodified to the tty i/f. |
| * Return value: |
| * number of processed bytes |
| */ |
| static unsigned lock_loop(unsigned numbytes, struct inbuf_t *inbuf) |
| { |
| unsigned char *src = inbuf->data + inbuf->head; |
| |
| gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response", numbytes, src); |
| gigaset_if_receive(inbuf->cs, src, numbytes); |
| return numbytes; |
| } |
| |
| /* process a block of received bytes in HDLC data mode |
| * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 == L2_HDLC) |
| * Collect HDLC frames, undoing byte stuffing and watching for DLE escapes. |
| * When a frame is complete, check the FCS and pass valid frames to the LL. |
| * If DLE is encountered, return immediately to let the caller handle it. |
| * Return value: |
| * number of processed bytes |
| */ |
| static unsigned hdlc_loop(unsigned numbytes, struct inbuf_t *inbuf) |
| { |
| struct cardstate *cs = inbuf->cs; |
| struct bc_state *bcs = cs->bcs; |
| int inputstate = bcs->inputstate; |
| __u16 fcs = bcs->rx_fcs; |
| struct sk_buff *skb = bcs->rx_skb; |
| unsigned char *src = inbuf->data + inbuf->head; |
| unsigned procbytes = 0; |
| unsigned char c; |
| |
| if (inputstate & INS_byte_stuff) { |
| if (!numbytes) |
| return 0; |
| inputstate &= ~INS_byte_stuff; |
| goto byte_stuff; |
| } |
| |
| while (procbytes < numbytes) { |
| c = *src++; |
| procbytes++; |
| if (c == DLE_FLAG) { |
| if (inputstate & INS_DLE_char) { |
| /* quoted DLE: clear quote flag */ |
| inputstate &= ~INS_DLE_char; |
| } else if (cs->dle || (inputstate & INS_DLE_command)) { |
| /* DLE escape, pass up for handling */ |
| inputstate |= INS_DLE_char; |
| break; |
| } |
| } |
| |
| if (c == PPP_ESCAPE) { |
| /* byte stuffing indicator: pull in next byte */ |
| if (procbytes >= numbytes) { |
| /* end of buffer, save for later processing */ |
| inputstate |= INS_byte_stuff; |
| break; |
| } |
| byte_stuff: |
| c = *src++; |
| procbytes++; |
| if (c == DLE_FLAG) { |
| if (inputstate & INS_DLE_char) { |
| /* quoted DLE: clear quote flag */ |
| inputstate &= ~INS_DLE_char; |
| } else if (cs->dle || |
| (inputstate & INS_DLE_command)) { |
| /* DLE escape, pass up for handling */ |
| inputstate |= |
| INS_DLE_char | INS_byte_stuff; |
| break; |
| } |
| } |
| c ^= PPP_TRANS; |
| #ifdef CONFIG_GIGASET_DEBUG |
| if (!muststuff(c)) |
| gig_dbg(DEBUG_HDLC, "byte stuffed: 0x%02x", c); |
| #endif |
| } else if (c == PPP_FLAG) { |
| /* end of frame: process content if any */ |
| if (inputstate & INS_have_data) { |
| gig_dbg(DEBUG_HDLC, |
| "7e----------------------------"); |
| |
| /* check and pass received frame */ |
| if (!skb) { |
| /* skipped frame */ |
| gigaset_isdn_rcv_err(bcs); |
| } else if (skb->len < 2) { |
| /* frame too short for FCS */ |
| dev_warn(cs->dev, |
| "short frame (%d)\n", |
| skb->len); |
| gigaset_isdn_rcv_err(bcs); |
| dev_kfree_skb_any(skb); |
| } else if (fcs != PPP_GOODFCS) { |
| /* frame check error */ |
| dev_err(cs->dev, |
| "Checksum failed, %u bytes corrupted!\n", |
| skb->len); |
| gigaset_isdn_rcv_err(bcs); |
| dev_kfree_skb_any(skb); |
| } else { |
| /* good frame */ |
| __skb_trim(skb, skb->len - 2); |
| gigaset_skb_rcvd(bcs, skb); |
| } |
| |
| /* prepare reception of next frame */ |
| inputstate &= ~INS_have_data; |
| skb = gigaset_new_rx_skb(bcs); |
| } else { |
| /* empty frame (7E 7E) */ |
| #ifdef CONFIG_GIGASET_DEBUG |
| ++bcs->emptycount; |
| #endif |
| if (!skb) { |
| /* skipped (?) */ |
| gigaset_isdn_rcv_err(bcs); |
| skb = gigaset_new_rx_skb(bcs); |
| } |
| } |
| |
| fcs = PPP_INITFCS; |
| continue; |
| #ifdef CONFIG_GIGASET_DEBUG |
| } else if (muststuff(c)) { |
| /* Should not happen. Possible after ZDLE=1<CR><LF>. */ |
| gig_dbg(DEBUG_HDLC, "not byte stuffed: 0x%02x", c); |
| #endif |
| } |
| |
| /* regular data byte, append to skb */ |
| #ifdef CONFIG_GIGASET_DEBUG |
| if (!(inputstate & INS_have_data)) { |
| gig_dbg(DEBUG_HDLC, "7e (%d x) ================", |
| bcs->emptycount); |
| bcs->emptycount = 0; |
| } |
| #endif |
| inputstate |= INS_have_data; |
| if (skb) { |
| if (skb->len >= bcs->rx_bufsize) { |
| dev_warn(cs->dev, "received packet too long\n"); |
| dev_kfree_skb_any(skb); |
| /* skip remainder of packet */ |
| bcs->rx_skb = skb = NULL; |
| } else { |
| *__skb_put(skb, 1) = c; |
| fcs = crc_ccitt_byte(fcs, c); |
| } |
| } |
| } |
| |
| bcs->inputstate = inputstate; |
| bcs->rx_fcs = fcs; |
| return procbytes; |
| } |
| |
| /* process a block of received bytes in transparent data mode |
| * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 != L2_HDLC) |
| * Invert bytes, undoing byte stuffing and watching for DLE escapes. |
| * If DLE is encountered, return immediately to let the caller handle it. |
| * Return value: |
| * number of processed bytes |
| */ |
| static unsigned iraw_loop(unsigned numbytes, struct inbuf_t *inbuf) |
| { |
| struct cardstate *cs = inbuf->cs; |
| struct bc_state *bcs = cs->bcs; |
| int inputstate = bcs->inputstate; |
| struct sk_buff *skb = bcs->rx_skb; |
| unsigned char *src = inbuf->data + inbuf->head; |
| unsigned procbytes = 0; |
| unsigned char c; |
| |
| if (!skb) { |
| /* skip this block */ |
| gigaset_new_rx_skb(bcs); |
| return numbytes; |
| } |
| |
| while (procbytes < numbytes && skb->len < bcs->rx_bufsize) { |
| c = *src++; |
| procbytes++; |
| |
| if (c == DLE_FLAG) { |
| if (inputstate & INS_DLE_char) { |
| /* quoted DLE: clear quote flag */ |
| inputstate &= ~INS_DLE_char; |
| } else if (cs->dle || (inputstate & INS_DLE_command)) { |
| /* DLE escape, pass up for handling */ |
| inputstate |= INS_DLE_char; |
| break; |
| } |
| } |
| |
| /* regular data byte: append to current skb */ |
| inputstate |= INS_have_data; |
| *__skb_put(skb, 1) = bitrev8(c); |
| } |
| |
| /* pass data up */ |
| if (inputstate & INS_have_data) { |
| gigaset_skb_rcvd(bcs, skb); |
| inputstate &= ~INS_have_data; |
| gigaset_new_rx_skb(bcs); |
| } |
| |
| bcs->inputstate = inputstate; |
| return procbytes; |
| } |
| |
| /* process DLE escapes |
| * Called whenever a DLE sequence might be encountered in the input stream. |
| * Either processes the entire DLE sequence or, if that isn't possible, |
| * notes the fact that an initial DLE has been received in the INS_DLE_char |
| * inputstate flag and resumes processing of the sequence on the next call. |
| */ |
| static void handle_dle(struct inbuf_t *inbuf) |
| { |
| struct cardstate *cs = inbuf->cs; |
| |
| if (cs->mstate == MS_LOCKED) |
| return; /* no DLE processing in lock mode */ |
| |
| if (!(inbuf->inputstate & INS_DLE_char)) { |
| /* no DLE pending */ |
| if (inbuf->data[inbuf->head] == DLE_FLAG && |
| (cs->dle || inbuf->inputstate & INS_DLE_command)) { |
| /* start of DLE sequence */ |
| inbuf->head++; |
| if (inbuf->head == inbuf->tail || |
| inbuf->head == RBUFSIZE) { |
| /* end of buffer, save for later processing */ |
| inbuf->inputstate |= INS_DLE_char; |
| return; |
| } |
| } else { |
| /* regular data byte */ |
| return; |
| } |
| } |
| |
| /* consume pending DLE */ |
| inbuf->inputstate &= ~INS_DLE_char; |
| |
| switch (inbuf->data[inbuf->head]) { |
| case 'X': /* begin of event message */ |
| if (inbuf->inputstate & INS_command) |
| dev_notice(cs->dev, |
| "received <DLE>X in command mode\n"); |
| inbuf->inputstate |= INS_command | INS_DLE_command; |
| inbuf->head++; /* byte consumed */ |
| break; |
| case '.': /* end of event message */ |
| if (!(inbuf->inputstate & INS_DLE_command)) |
| dev_notice(cs->dev, |
| "received <DLE>. without <DLE>X\n"); |
| inbuf->inputstate &= ~INS_DLE_command; |
| /* return to data mode if in DLE mode */ |
| if (cs->dle) |
| inbuf->inputstate &= ~INS_command; |
| inbuf->head++; /* byte consumed */ |
| break; |
| case DLE_FLAG: /* DLE in data stream */ |
| /* mark as quoted */ |
| inbuf->inputstate |= INS_DLE_char; |
| if (!(cs->dle || inbuf->inputstate & INS_DLE_command)) |
| dev_notice(cs->dev, |
| "received <DLE><DLE> not in DLE mode\n"); |
| break; /* quoted byte left in buffer */ |
| default: |
| dev_notice(cs->dev, "received <DLE><%02x>\n", |
| inbuf->data[inbuf->head]); |
| /* quoted byte left in buffer */ |
| } |
| } |
| |
| /** |
| * gigaset_m10x_input() - process a block of data received from the device |
| * @inbuf: received data and device descriptor structure. |
| * |
| * Called by hardware module {ser,usb}_gigaset with a block of received |
| * bytes. Separates the bytes received over the serial data channel into |
| * user data and command replies (locked/unlocked) according to the |
| * current state of the interface. |
| */ |
| void gigaset_m10x_input(struct inbuf_t *inbuf) |
| { |
| struct cardstate *cs = inbuf->cs; |
| unsigned numbytes, procbytes; |
| |
| gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", inbuf->head, inbuf->tail); |
| |
| while (inbuf->head != inbuf->tail) { |
| /* check for DLE escape */ |
| handle_dle(inbuf); |
| |
| /* process a contiguous block of bytes */ |
| numbytes = (inbuf->head > inbuf->tail ? |
| RBUFSIZE : inbuf->tail) - inbuf->head; |
| gig_dbg(DEBUG_INTR, "processing %u bytes", numbytes); |
| /* |
| * numbytes may be 0 if handle_dle() ate the last byte. |
| * This does no harm, *_loop() will just return 0 immediately. |
| */ |
| |
| if (cs->mstate == MS_LOCKED) |
| procbytes = lock_loop(numbytes, inbuf); |
| else if (inbuf->inputstate & INS_command) |
| procbytes = cmd_loop(numbytes, inbuf); |
| else if (cs->bcs->proto2 == L2_HDLC) |
| procbytes = hdlc_loop(numbytes, inbuf); |
| else |
| procbytes = iraw_loop(numbytes, inbuf); |
| inbuf->head += procbytes; |
| |
| /* check for buffer wraparound */ |
| if (inbuf->head >= RBUFSIZE) |
| inbuf->head = 0; |
| |
| gig_dbg(DEBUG_INTR, "head set to %u", inbuf->head); |
| } |
| } |
| EXPORT_SYMBOL_GPL(gigaset_m10x_input); |
| |
| |
| /* == data output ========================================================== */ |
| |
| /* |
| * Encode a data packet into an octet stuffed HDLC frame with FCS, |
| * opening and closing flags, preserving headroom data. |
| * parameters: |
| * skb skb containing original packet (freed upon return) |
| * Return value: |
| * pointer to newly allocated skb containing the result frame |
| * and the original link layer header, NULL on error |
| */ |
| static struct sk_buff *HDLC_Encode(struct sk_buff *skb) |
| { |
| struct sk_buff *hdlc_skb; |
| __u16 fcs; |
| unsigned char c; |
| unsigned char *cp; |
| int len; |
| unsigned int stuf_cnt; |
| |
| stuf_cnt = 0; |
| fcs = PPP_INITFCS; |
| cp = skb->data; |
| len = skb->len; |
| while (len--) { |
| if (muststuff(*cp)) |
| stuf_cnt++; |
| fcs = crc_ccitt_byte(fcs, *cp++); |
| } |
| fcs ^= 0xffff; /* complement */ |
| |
| /* size of new buffer: original size + number of stuffing bytes |
| * + 2 bytes FCS + 2 stuffing bytes for FCS (if needed) + 2 flag bytes |
| * + room for link layer header |
| */ |
| hdlc_skb = dev_alloc_skb(skb->len + stuf_cnt + 6 + skb->mac_len); |
| if (!hdlc_skb) { |
| dev_kfree_skb_any(skb); |
| return NULL; |
| } |
| |
| /* Copy link layer header into new skb */ |
| skb_reset_mac_header(hdlc_skb); |
| skb_reserve(hdlc_skb, skb->mac_len); |
| memcpy(skb_mac_header(hdlc_skb), skb_mac_header(skb), skb->mac_len); |
| hdlc_skb->mac_len = skb->mac_len; |
| |
| /* Add flag sequence in front of everything.. */ |
| *(skb_put(hdlc_skb, 1)) = PPP_FLAG; |
| |
| /* Perform byte stuffing while copying data. */ |
| while (skb->len--) { |
| if (muststuff(*skb->data)) { |
| *(skb_put(hdlc_skb, 1)) = PPP_ESCAPE; |
| *(skb_put(hdlc_skb, 1)) = (*skb->data++) ^ PPP_TRANS; |
| } else |
| *(skb_put(hdlc_skb, 1)) = *skb->data++; |
| } |
| |
| /* Finally add FCS (byte stuffed) and flag sequence */ |
| c = (fcs & 0x00ff); /* least significant byte first */ |
| if (muststuff(c)) { |
| *(skb_put(hdlc_skb, 1)) = PPP_ESCAPE; |
| c ^= PPP_TRANS; |
| } |
| *(skb_put(hdlc_skb, 1)) = c; |
| |
| c = ((fcs >> 8) & 0x00ff); |
| if (muststuff(c)) { |
| *(skb_put(hdlc_skb, 1)) = PPP_ESCAPE; |
| c ^= PPP_TRANS; |
| } |
| *(skb_put(hdlc_skb, 1)) = c; |
| |
| *(skb_put(hdlc_skb, 1)) = PPP_FLAG; |
| |
| dev_kfree_skb_any(skb); |
| return hdlc_skb; |
| } |
| |
| /* |
| * Encode a data packet into an octet stuffed raw bit inverted frame, |
| * preserving headroom data. |
| * parameters: |
| * skb skb containing original packet (freed upon return) |
| * Return value: |
| * pointer to newly allocated skb containing the result frame |
| * and the original link layer header, NULL on error |
| */ |
| static struct sk_buff *iraw_encode(struct sk_buff *skb) |
| { |
| struct sk_buff *iraw_skb; |
| unsigned char c; |
| unsigned char *cp; |
| int len; |
| |
| /* size of new buffer (worst case = every byte must be stuffed): |
| * 2 * original size + room for link layer header |
| */ |
| iraw_skb = dev_alloc_skb(2 * skb->len + skb->mac_len); |
| if (!iraw_skb) { |
| dev_kfree_skb_any(skb); |
| return NULL; |
| } |
| |
| /* copy link layer header into new skb */ |
| skb_reset_mac_header(iraw_skb); |
| skb_reserve(iraw_skb, skb->mac_len); |
| memcpy(skb_mac_header(iraw_skb), skb_mac_header(skb), skb->mac_len); |
| iraw_skb->mac_len = skb->mac_len; |
| |
| /* copy and stuff data */ |
| cp = skb->data; |
| len = skb->len; |
| while (len--) { |
| c = bitrev8(*cp++); |
| if (c == DLE_FLAG) |
| *(skb_put(iraw_skb, 1)) = c; |
| *(skb_put(iraw_skb, 1)) = c; |
| } |
| dev_kfree_skb_any(skb); |
| return iraw_skb; |
| } |
| |
| /** |
| * gigaset_m10x_send_skb() - queue an skb for sending |
| * @bcs: B channel descriptor structure. |
| * @skb: data to send. |
| * |
| * Called by LL to encode and queue an skb for sending, and start |
| * transmission if necessary. |
| * Once the payload data has been transmitted completely, gigaset_skb_sent() |
| * will be called with the skb's link layer header preserved. |
| * |
| * Return value: |
| * number of bytes accepted for sending (skb->len) if ok, |
| * error code < 0 (eg. -ENOMEM) on error |
| */ |
| int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb) |
| { |
| struct cardstate *cs = bcs->cs; |
| unsigned len = skb->len; |
| unsigned long flags; |
| |
| if (bcs->proto2 == L2_HDLC) |
| skb = HDLC_Encode(skb); |
| else |
| skb = iraw_encode(skb); |
| if (!skb) { |
| dev_err(cs->dev, |
| "unable to allocate memory for encoding!\n"); |
| return -ENOMEM; |
| } |
| |
| skb_queue_tail(&bcs->squeue, skb); |
| spin_lock_irqsave(&cs->lock, flags); |
| if (cs->connected) |
| tasklet_schedule(&cs->write_tasklet); |
| spin_unlock_irqrestore(&cs->lock, flags); |
| |
| return len; /* ok so far */ |
| } |
| EXPORT_SYMBOL_GPL(gigaset_m10x_send_skb); |