| /* |
| * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support |
| * Copyright (c) 2008-2009 Marvell Semiconductor |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/jiffies.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/phy.h> |
| #include <net/dsa.h> |
| #include "mv88e6xxx.h" |
| |
| static const struct mv88e6xxx_switch_id mv88e6131_table[] = { |
| { PORT_SWITCH_ID_6085, "Marvell 88E6085" }, |
| { PORT_SWITCH_ID_6095, "Marvell 88E6095/88E6095F" }, |
| { PORT_SWITCH_ID_6131, "Marvell 88E6131" }, |
| { PORT_SWITCH_ID_6131_B2, "Marvell 88E6131 (B2)" }, |
| { PORT_SWITCH_ID_6185, "Marvell 88E6185" }, |
| }; |
| |
| static char *mv88e6131_probe(struct device *host_dev, int sw_addr) |
| { |
| return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6131_table, |
| ARRAY_SIZE(mv88e6131_table)); |
| } |
| |
| static int mv88e6131_setup_global(struct dsa_switch *ds) |
| { |
| u32 upstream_port = dsa_upstream_port(ds); |
| int ret; |
| u32 reg; |
| |
| ret = mv88e6xxx_setup_global(ds); |
| if (ret) |
| return ret; |
| |
| /* Enable the PHY polling unit, don't discard packets with |
| * excessive collisions, use a weighted fair queueing scheme |
| * to arbitrate between packet queues, set the maximum frame |
| * size to 1632, and mask all interrupt sources. |
| */ |
| REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, |
| GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_MAX_FRAME_1632); |
| |
| /* Set the VLAN ethertype to 0x8100. */ |
| REG_WRITE(REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100); |
| |
| /* Disable ARP mirroring, and configure the upstream port as |
| * the port to which ingress and egress monitor frames are to |
| * be sent. |
| */ |
| reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT | |
| upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT | |
| GLOBAL_MONITOR_CONTROL_ARP_DISABLED; |
| REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg); |
| |
| /* Disable cascade port functionality unless this device |
| * is used in a cascade configuration, and set the switch's |
| * DSA device number. |
| */ |
| if (ds->dst->pd->nr_chips > 1) |
| REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, |
| GLOBAL_CONTROL_2_MULTIPLE_CASCADE | |
| (ds->index & 0x1f)); |
| else |
| REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, |
| GLOBAL_CONTROL_2_NO_CASCADE | |
| (ds->index & 0x1f)); |
| |
| /* Force the priority of IGMP/MLD snoop frames and ARP frames |
| * to the highest setting. |
| */ |
| REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE, |
| GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP | |
| 7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT | |
| GLOBAL2_PRIO_OVERRIDE_FORCE_ARP | |
| 7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT); |
| |
| return 0; |
| } |
| |
| static int mv88e6131_setup(struct dsa_switch *ds) |
| { |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); |
| int ret; |
| |
| ret = mv88e6xxx_setup_common(ds); |
| if (ret < 0) |
| return ret; |
| |
| mv88e6xxx_ppu_state_init(ds); |
| |
| switch (ps->id) { |
| case PORT_SWITCH_ID_6085: |
| case PORT_SWITCH_ID_6185: |
| ps->num_ports = 10; |
| break; |
| case PORT_SWITCH_ID_6095: |
| ps->num_ports = 11; |
| break; |
| case PORT_SWITCH_ID_6131: |
| case PORT_SWITCH_ID_6131_B2: |
| ps->num_ports = 8; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| ret = mv88e6xxx_switch_reset(ds, false); |
| if (ret < 0) |
| return ret; |
| |
| ret = mv88e6131_setup_global(ds); |
| if (ret < 0) |
| return ret; |
| |
| return mv88e6xxx_setup_ports(ds); |
| } |
| |
| static int mv88e6131_port_to_phy_addr(struct dsa_switch *ds, int port) |
| { |
| struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); |
| |
| if (port >= 0 && port < ps->num_ports) |
| return port; |
| |
| return -EINVAL; |
| } |
| |
| static int |
| mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum) |
| { |
| int addr = mv88e6131_port_to_phy_addr(ds, port); |
| |
| if (addr < 0) |
| return addr; |
| |
| return mv88e6xxx_phy_read_ppu(ds, addr, regnum); |
| } |
| |
| static int |
| mv88e6131_phy_write(struct dsa_switch *ds, |
| int port, int regnum, u16 val) |
| { |
| int addr = mv88e6131_port_to_phy_addr(ds, port); |
| |
| if (addr < 0) |
| return addr; |
| |
| return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val); |
| } |
| |
| struct dsa_switch_driver mv88e6131_switch_driver = { |
| .tag_protocol = DSA_TAG_PROTO_DSA, |
| .priv_size = sizeof(struct mv88e6xxx_priv_state), |
| .probe = mv88e6131_probe, |
| .setup = mv88e6131_setup, |
| .set_addr = mv88e6xxx_set_addr_direct, |
| .phy_read = mv88e6131_phy_read, |
| .phy_write = mv88e6131_phy_write, |
| .get_strings = mv88e6xxx_get_strings, |
| .get_ethtool_stats = mv88e6xxx_get_ethtool_stats, |
| .get_sset_count = mv88e6xxx_get_sset_count, |
| .adjust_link = mv88e6xxx_adjust_link, |
| }; |
| |
| MODULE_ALIAS("platform:mv88e6085"); |
| MODULE_ALIAS("platform:mv88e6095"); |
| MODULE_ALIAS("platform:mv88e6095f"); |
| MODULE_ALIAS("platform:mv88e6131"); |