| /* |
| * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include "phy-qcom-ufs-qmp-14nm.h" |
| |
| #define UFS_PHY_NAME "ufs_phy_qmp_14nm" |
| #define UFS_PHY_VDDA_PHY_UV (925000) |
| |
| static |
| int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, |
| bool is_rate_B) |
| { |
| int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A); |
| int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); |
| int err; |
| |
| err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A, |
| tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B); |
| |
| if (err) |
| dev_err(ufs_qcom_phy->dev, |
| "%s: ufs_qcom_phy_calibrate() failed %d\n", |
| __func__, err); |
| return err; |
| } |
| |
| static |
| void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common) |
| { |
| phy_common->quirks = |
| UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; |
| } |
| |
| static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy_qmp_14nm *phy = phy_get_drvdata(generic_phy); |
| struct ufs_qcom_phy *phy_common = &phy->common_cfg; |
| int err; |
| |
| err = ufs_qcom_phy_init_clks(generic_phy, phy_common); |
| if (err) { |
| dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n", |
| __func__, err); |
| goto out; |
| } |
| |
| err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common); |
| if (err) { |
| dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n", |
| __func__, err); |
| goto out; |
| } |
| phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV; |
| phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV; |
| |
| ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common); |
| |
| out: |
| return err; |
| } |
| |
| static |
| void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val) |
| { |
| writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); |
| /* |
| * Before any transactions involving PHY, ensure PHY knows |
| * that it's analog rail is powered ON (or OFF). |
| */ |
| mb(); |
| } |
| |
| static inline |
| void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) |
| { |
| /* |
| * 14nm PHY does not have TX_LANE_ENABLE register. |
| * Implement this function so as not to propagate error to caller. |
| */ |
| } |
| |
| static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy) |
| { |
| u32 tmp; |
| |
| tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); |
| tmp &= ~MASK_SERDES_START; |
| tmp |= (1 << OFFSET_SERDES_START); |
| writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); |
| /* Ensure register value is committed */ |
| mb(); |
| } |
| |
| static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) |
| { |
| int err = 0; |
| u32 val; |
| |
| err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, |
| val, (val & MASK_PCS_READY), 10, 1000000); |
| if (err) |
| dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", |
| __func__, err); |
| return err; |
| } |
| |
| static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = { |
| .init = ufs_qcom_phy_qmp_14nm_init, |
| .exit = ufs_qcom_phy_exit, |
| .power_on = ufs_qcom_phy_power_on, |
| .power_off = ufs_qcom_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct ufs_qcom_phy_specific_ops phy_14nm_ops = { |
| .calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate, |
| .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes, |
| .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready, |
| .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable, |
| .power_control = ufs_qcom_phy_qmp_14nm_power_control, |
| }; |
| |
| static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct phy *generic_phy; |
| struct ufs_qcom_phy_qmp_14nm *phy; |
| int err = 0; |
| |
| phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); |
| if (!phy) { |
| dev_err(dev, "%s: failed to allocate phy\n", __func__); |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg, |
| &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops); |
| |
| if (!generic_phy) { |
| dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n", |
| __func__); |
| err = -EIO; |
| goto out; |
| } |
| |
| phy_set_drvdata(generic_phy, phy); |
| |
| strlcpy(phy->common_cfg.name, UFS_PHY_NAME, |
| sizeof(phy->common_cfg.name)); |
| |
| out: |
| return err; |
| } |
| |
| static int ufs_qcom_phy_qmp_14nm_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct phy *generic_phy = to_phy(dev); |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| int err = 0; |
| |
| err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy); |
| if (err) |
| dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n", |
| __func__, err); |
| |
| return err; |
| } |
| |
| static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = { |
| {.compatible = "qcom,ufs-phy-qmp-14nm"}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match); |
| |
| static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = { |
| .probe = ufs_qcom_phy_qmp_14nm_probe, |
| .remove = ufs_qcom_phy_qmp_14nm_remove, |
| .driver = { |
| .of_match_table = ufs_qcom_phy_qmp_14nm_of_match, |
| .name = "ufs_qcom_phy_qmp_14nm", |
| }, |
| }; |
| |
| module_platform_driver(ufs_qcom_phy_qmp_14nm_driver); |
| |
| MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm"); |
| MODULE_LICENSE("GPL v2"); |