| /* |
| * zcrypt 2.1.0 |
| * |
| * Copyright IBM Corp. 2001, 2006 |
| * Author(s): Robert Burroughs |
| * Eric Rossman (edrossma@us.ibm.com) |
| * |
| * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) |
| * Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #ifndef _ZCRYPT_CCA_KEY_H_ |
| #define _ZCRYPT_CCA_KEY_H_ |
| |
| struct T6_keyBlock_hdr { |
| unsigned short blen; |
| unsigned short ulen; |
| unsigned short flags; |
| }; |
| |
| /** |
| * mapping for the cca private ME key token. |
| * Three parts of interest here: the header, the private section and |
| * the public section. |
| * |
| * mapping for the cca key token header |
| */ |
| struct cca_token_hdr { |
| unsigned char token_identifier; |
| unsigned char version; |
| unsigned short token_length; |
| unsigned char reserved[4]; |
| } __attribute__((packed)); |
| |
| #define CCA_TKN_HDR_ID_EXT 0x1E |
| |
| /** |
| * mapping for the cca private ME section |
| */ |
| struct cca_private_ext_ME_sec { |
| unsigned char section_identifier; |
| unsigned char version; |
| unsigned short section_length; |
| unsigned char private_key_hash[20]; |
| unsigned char reserved1[4]; |
| unsigned char key_format; |
| unsigned char reserved2; |
| unsigned char key_name_hash[20]; |
| unsigned char key_use_flags[4]; |
| unsigned char reserved3[6]; |
| unsigned char reserved4[24]; |
| unsigned char confounder[24]; |
| unsigned char exponent[128]; |
| unsigned char modulus[128]; |
| } __attribute__((packed)); |
| |
| #define CCA_PVT_USAGE_ALL 0x80 |
| |
| /** |
| * mapping for the cca public section |
| * In a private key, the modulus doesn't appear in the public |
| * section. So, an arbitrary public exponent of 0x010001 will be |
| * used, for a section length of 0x0F always. |
| */ |
| struct cca_public_sec { |
| unsigned char section_identifier; |
| unsigned char version; |
| unsigned short section_length; |
| unsigned char reserved[2]; |
| unsigned short exponent_len; |
| unsigned short modulus_bit_len; |
| unsigned short modulus_byte_len; /* In a private key, this is 0 */ |
| } __attribute__((packed)); |
| |
| /** |
| * mapping for the cca private CRT key 'token' |
| * The first three parts (the only parts considered in this release) |
| * are: the header, the private section and the public section. |
| * The header and public section are the same as for the |
| * struct cca_private_ext_ME |
| * |
| * Following the structure are the quantities p, q, dp, dq, u, pad, |
| * and modulus, in that order, where pad_len is the modulo 8 |
| * complement of the residue modulo 8 of the sum of |
| * (p_len + q_len + dp_len + dq_len + u_len). |
| */ |
| struct cca_pvt_ext_CRT_sec { |
| unsigned char section_identifier; |
| unsigned char version; |
| unsigned short section_length; |
| unsigned char private_key_hash[20]; |
| unsigned char reserved1[4]; |
| unsigned char key_format; |
| unsigned char reserved2; |
| unsigned char key_name_hash[20]; |
| unsigned char key_use_flags[4]; |
| unsigned short p_len; |
| unsigned short q_len; |
| unsigned short dp_len; |
| unsigned short dq_len; |
| unsigned short u_len; |
| unsigned short mod_len; |
| unsigned char reserved3[4]; |
| unsigned short pad_len; |
| unsigned char reserved4[52]; |
| unsigned char confounder[8]; |
| } __attribute__((packed)); |
| |
| #define CCA_PVT_EXT_CRT_SEC_ID_PVT 0x08 |
| #define CCA_PVT_EXT_CRT_SEC_FMT_CL 0x40 |
| |
| /** |
| * Set up private key fields of a type6 MEX message. |
| * Note that all numerics in the key token are big-endian, |
| * while the entries in the key block header are little-endian. |
| * |
| * @mex: pointer to user input data |
| * @p: pointer to memory area for the key |
| * |
| * Returns the size of the key area or -EFAULT |
| */ |
| static inline int zcrypt_type6_mex_key_de(struct ica_rsa_modexpo *mex, |
| void *p, int big_endian) |
| { |
| static struct cca_token_hdr static_pvt_me_hdr = { |
| .token_identifier = 0x1E, |
| .token_length = 0x0183, |
| }; |
| static struct cca_private_ext_ME_sec static_pvt_me_sec = { |
| .section_identifier = 0x02, |
| .section_length = 0x016C, |
| .key_use_flags = {0x80,0x00,0x00,0x00}, |
| }; |
| static struct cca_public_sec static_pub_me_sec = { |
| .section_identifier = 0x04, |
| .section_length = 0x000F, |
| .exponent_len = 0x0003, |
| }; |
| static char pk_exponent[3] = { 0x01, 0x00, 0x01 }; |
| struct { |
| struct T6_keyBlock_hdr t6_hdr; |
| struct cca_token_hdr pvtMeHdr; |
| struct cca_private_ext_ME_sec pvtMeSec; |
| struct cca_public_sec pubMeSec; |
| char exponent[3]; |
| } __attribute__((packed)) *key = p; |
| unsigned char *temp; |
| |
| memset(key, 0, sizeof(*key)); |
| |
| if (big_endian) { |
| key->t6_hdr.blen = cpu_to_be16(0x189); |
| key->t6_hdr.ulen = cpu_to_be16(0x189 - 2); |
| } else { |
| key->t6_hdr.blen = cpu_to_le16(0x189); |
| key->t6_hdr.ulen = cpu_to_le16(0x189 - 2); |
| } |
| key->pvtMeHdr = static_pvt_me_hdr; |
| key->pvtMeSec = static_pvt_me_sec; |
| key->pubMeSec = static_pub_me_sec; |
| /* |
| * In a private key, the modulus doesn't appear in the public |
| * section. So, an arbitrary public exponent of 0x010001 will be |
| * used. |
| */ |
| memcpy(key->exponent, pk_exponent, 3); |
| |
| /* key parameter block */ |
| temp = key->pvtMeSec.exponent + |
| sizeof(key->pvtMeSec.exponent) - mex->inputdatalength; |
| if (copy_from_user(temp, mex->b_key, mex->inputdatalength)) |
| return -EFAULT; |
| |
| /* modulus */ |
| temp = key->pvtMeSec.modulus + |
| sizeof(key->pvtMeSec.modulus) - mex->inputdatalength; |
| if (copy_from_user(temp, mex->n_modulus, mex->inputdatalength)) |
| return -EFAULT; |
| key->pubMeSec.modulus_bit_len = 8 * mex->inputdatalength; |
| return sizeof(*key); |
| } |
| |
| /** |
| * Set up private key fields of a type6 MEX message. The _pad variant |
| * strips leading zeroes from the b_key. |
| * Note that all numerics in the key token are big-endian, |
| * while the entries in the key block header are little-endian. |
| * |
| * @mex: pointer to user input data |
| * @p: pointer to memory area for the key |
| * |
| * Returns the size of the key area or -EFAULT |
| */ |
| static inline int zcrypt_type6_mex_key_en(struct ica_rsa_modexpo *mex, |
| void *p, int big_endian) |
| { |
| static struct cca_token_hdr static_pub_hdr = { |
| .token_identifier = 0x1E, |
| }; |
| static struct cca_public_sec static_pub_sec = { |
| .section_identifier = 0x04, |
| }; |
| struct { |
| struct T6_keyBlock_hdr t6_hdr; |
| struct cca_token_hdr pubHdr; |
| struct cca_public_sec pubSec; |
| char exponent[0]; |
| } __attribute__((packed)) *key = p; |
| unsigned char *temp; |
| int i; |
| |
| memset(key, 0, sizeof(*key)); |
| |
| key->pubHdr = static_pub_hdr; |
| key->pubSec = static_pub_sec; |
| |
| /* key parameter block */ |
| temp = key->exponent; |
| if (copy_from_user(temp, mex->b_key, mex->inputdatalength)) |
| return -EFAULT; |
| /* Strip leading zeroes from b_key. */ |
| for (i = 0; i < mex->inputdatalength; i++) |
| if (temp[i]) |
| break; |
| if (i >= mex->inputdatalength) |
| return -EINVAL; |
| memmove(temp, temp + i, mex->inputdatalength - i); |
| temp += mex->inputdatalength - i; |
| /* modulus */ |
| if (copy_from_user(temp, mex->n_modulus, mex->inputdatalength)) |
| return -EFAULT; |
| |
| key->pubSec.modulus_bit_len = 8 * mex->inputdatalength; |
| key->pubSec.modulus_byte_len = mex->inputdatalength; |
| key->pubSec.exponent_len = mex->inputdatalength - i; |
| key->pubSec.section_length = sizeof(key->pubSec) + |
| 2*mex->inputdatalength - i; |
| key->pubHdr.token_length = |
| key->pubSec.section_length + sizeof(key->pubHdr); |
| if (big_endian) { |
| key->t6_hdr.ulen = cpu_to_be16(key->pubHdr.token_length + 4); |
| key->t6_hdr.blen = cpu_to_be16(key->pubHdr.token_length + 6); |
| } else { |
| key->t6_hdr.ulen = cpu_to_le16(key->pubHdr.token_length + 4); |
| key->t6_hdr.blen = cpu_to_le16(key->pubHdr.token_length + 6); |
| } |
| return sizeof(*key) + 2*mex->inputdatalength - i; |
| } |
| |
| /** |
| * Set up private key fields of a type6 CRT message. |
| * Note that all numerics in the key token are big-endian, |
| * while the entries in the key block header are little-endian. |
| * |
| * @mex: pointer to user input data |
| * @p: pointer to memory area for the key |
| * |
| * Returns the size of the key area or -EFAULT |
| */ |
| static inline int zcrypt_type6_crt_key(struct ica_rsa_modexpo_crt *crt, |
| void *p, int big_endian) |
| { |
| static struct cca_public_sec static_cca_pub_sec = { |
| .section_identifier = 4, |
| .section_length = 0x000f, |
| .exponent_len = 0x0003, |
| }; |
| static char pk_exponent[3] = { 0x01, 0x00, 0x01 }; |
| struct { |
| struct T6_keyBlock_hdr t6_hdr; |
| struct cca_token_hdr token; |
| struct cca_pvt_ext_CRT_sec pvt; |
| char key_parts[0]; |
| } __attribute__((packed)) *key = p; |
| struct cca_public_sec *pub; |
| int short_len, long_len, pad_len, key_len, size; |
| |
| memset(key, 0, sizeof(*key)); |
| |
| short_len = (crt->inputdatalength + 1) / 2; |
| long_len = short_len + 8; |
| pad_len = -(3*long_len + 2*short_len) & 7; |
| key_len = 3*long_len + 2*short_len + pad_len + crt->inputdatalength; |
| size = sizeof(*key) + key_len + sizeof(*pub) + 3; |
| |
| /* parameter block.key block */ |
| if (big_endian) { |
| key->t6_hdr.blen = cpu_to_be16(size); |
| key->t6_hdr.ulen = cpu_to_be16(size - 2); |
| } else { |
| key->t6_hdr.blen = cpu_to_le16(size); |
| key->t6_hdr.ulen = cpu_to_le16(size - 2); |
| } |
| |
| /* key token header */ |
| key->token.token_identifier = CCA_TKN_HDR_ID_EXT; |
| key->token.token_length = size - 6; |
| |
| /* private section */ |
| key->pvt.section_identifier = CCA_PVT_EXT_CRT_SEC_ID_PVT; |
| key->pvt.section_length = sizeof(key->pvt) + key_len; |
| key->pvt.key_format = CCA_PVT_EXT_CRT_SEC_FMT_CL; |
| key->pvt.key_use_flags[0] = CCA_PVT_USAGE_ALL; |
| key->pvt.p_len = key->pvt.dp_len = key->pvt.u_len = long_len; |
| key->pvt.q_len = key->pvt.dq_len = short_len; |
| key->pvt.mod_len = crt->inputdatalength; |
| key->pvt.pad_len = pad_len; |
| |
| /* key parts */ |
| if (copy_from_user(key->key_parts, crt->np_prime, long_len) || |
| copy_from_user(key->key_parts + long_len, |
| crt->nq_prime, short_len) || |
| copy_from_user(key->key_parts + long_len + short_len, |
| crt->bp_key, long_len) || |
| copy_from_user(key->key_parts + 2*long_len + short_len, |
| crt->bq_key, short_len) || |
| copy_from_user(key->key_parts + 2*long_len + 2*short_len, |
| crt->u_mult_inv, long_len)) |
| return -EFAULT; |
| memset(key->key_parts + 3*long_len + 2*short_len + pad_len, |
| 0xff, crt->inputdatalength); |
| pub = (struct cca_public_sec *)(key->key_parts + key_len); |
| *pub = static_cca_pub_sec; |
| pub->modulus_bit_len = 8 * crt->inputdatalength; |
| /* |
| * In a private key, the modulus doesn't appear in the public |
| * section. So, an arbitrary public exponent of 0x010001 will be |
| * used. |
| */ |
| memcpy((char *) (pub + 1), pk_exponent, 3); |
| return size; |
| } |
| |
| #endif /* _ZCRYPT_CCA_KEY_H_ */ |