| /* SPDX-License-Identifier: GPL-2.0 |
| * flexcan.c - FLEXCAN CAN controller driver |
| * |
| * Copyright (c) 2005-2006 Varma Electronics Oy |
| * Copyright (c) 2009 Sascha Hauer, Pengutronix |
| * Copyright (c) 2010-2017 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de> |
| * Copyright (c) 2014 David Jander, Protonic Holland |
| * Copyright (C) 2022 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com> |
| * |
| * Based on code originally by Andrey Volkov <avolkov@varma-el.com> |
| * |
| */ |
| |
| #ifndef _FLEXCAN_H |
| #define _FLEXCAN_H |
| |
| #include <linux/can/rx-offload.h> |
| |
| /* FLEXCAN hardware feature flags |
| * |
| * Below is some version info we got: |
| * SOC Version IP-Version Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece- FD Mode MB |
| * Filter? connected? Passive detection ption in MB Supported? |
| * MCF5441X FlexCAN2 ? no yes no no no no 16 |
| * MX25 FlexCAN2 03.00.00.00 no no no no no no 64 |
| * MX28 FlexCAN2 03.00.04.00 yes yes no no no no 64 |
| * MX35 FlexCAN2 03.00.00.00 no no no no no no 64 |
| * MX53 FlexCAN2 03.00.00.00 yes no no no no no 64 |
| * MX6s FlexCAN3 10.00.12.00 yes yes no no yes no 64 |
| * MX8QM FlexCAN3 03.00.23.00 yes yes no no yes yes 64 |
| * MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes 64 |
| * VF610 FlexCAN3 ? no yes no yes yes? no 64 |
| * LS1021A FlexCAN2 03.00.04.00 no yes no no yes no 64 |
| * LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes 64 |
| * |
| * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. |
| */ |
| |
| /* [TR]WRN_INT not connected */ |
| #define FLEXCAN_QUIRK_BROKEN_WERR_STATE BIT(1) |
| /* Disable RX FIFO Global mask */ |
| #define FLEXCAN_QUIRK_DISABLE_RXFG BIT(2) |
| /* Enable EACEN and RRS bit in ctrl2 */ |
| #define FLEXCAN_QUIRK_ENABLE_EACEN_RRS BIT(3) |
| /* Disable non-correctable errors interrupt and freeze mode */ |
| #define FLEXCAN_QUIRK_DISABLE_MECR BIT(4) |
| /* Use mailboxes (not FIFO) for RX path */ |
| #define FLEXCAN_QUIRK_USE_RX_MAILBOX BIT(5) |
| /* No interrupt for error passive */ |
| #define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6) |
| /* default to BE register access */ |
| #define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7) |
| /* Setup stop mode with GPR to support wakeup */ |
| #define FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR BIT(8) |
| /* Support CAN-FD mode */ |
| #define FLEXCAN_QUIRK_SUPPORT_FD BIT(9) |
| /* support memory detection and correction */ |
| #define FLEXCAN_QUIRK_SUPPORT_ECC BIT(10) |
| /* Setup stop mode with SCU firmware to support wakeup */ |
| #define FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW BIT(11) |
| /* Setup 3 separate interrupts, main, boff and err */ |
| #define FLEXCAN_QUIRK_NR_IRQ_3 BIT(12) |
| /* Setup 16 mailboxes */ |
| #define FLEXCAN_QUIRK_NR_MB_16 BIT(13) |
| /* Device supports RX via mailboxes */ |
| #define FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX BIT(14) |
| /* Device supports RTR reception via mailboxes */ |
| #define FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR BIT(15) |
| /* Device supports RX via FIFO */ |
| #define FLEXCAN_QUIRK_SUPPORT_RX_FIFO BIT(16) |
| |
| struct flexcan_devtype_data { |
| u32 quirks; /* quirks needed for different IP cores */ |
| }; |
| |
| struct flexcan_stop_mode { |
| struct regmap *gpr; |
| u8 req_gpr; |
| u8 req_bit; |
| }; |
| |
| struct flexcan_priv { |
| struct can_priv can; |
| struct can_rx_offload offload; |
| struct device *dev; |
| |
| struct flexcan_regs __iomem *regs; |
| struct flexcan_mb __iomem *tx_mb; |
| struct flexcan_mb __iomem *tx_mb_reserved; |
| u8 tx_mb_idx; |
| u8 mb_count; |
| u8 mb_size; |
| u8 clk_src; /* clock source of CAN Protocol Engine */ |
| u8 scu_idx; |
| |
| u64 rx_mask; |
| u64 tx_mask; |
| u32 reg_ctrl_default; |
| |
| struct clk *clk_ipg; |
| struct clk *clk_per; |
| struct flexcan_devtype_data devtype_data; |
| struct regulator *reg_xceiver; |
| struct flexcan_stop_mode stm; |
| |
| int irq_boff; |
| int irq_err; |
| |
| /* IPC handle when setup stop mode by System Controller firmware(scfw) */ |
| struct imx_sc_ipc *sc_ipc_handle; |
| |
| /* Read and Write APIs */ |
| u32 (*read)(void __iomem *addr); |
| void (*write)(u32 val, void __iomem *addr); |
| }; |
| |
| extern const struct ethtool_ops flexcan_ethtool_ops; |
| |
| static inline bool |
| flexcan_supports_rx_mailbox(const struct flexcan_priv *priv) |
| { |
| const u32 quirks = priv->devtype_data.quirks; |
| |
| return quirks & FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX; |
| } |
| |
| static inline bool |
| flexcan_supports_rx_mailbox_rtr(const struct flexcan_priv *priv) |
| { |
| const u32 quirks = priv->devtype_data.quirks; |
| |
| return (quirks & (FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX | |
| FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR)) == |
| (FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX | |
| FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR); |
| } |
| |
| static inline bool |
| flexcan_supports_rx_fifo(const struct flexcan_priv *priv) |
| { |
| const u32 quirks = priv->devtype_data.quirks; |
| |
| return quirks & FLEXCAN_QUIRK_SUPPORT_RX_FIFO; |
| } |
| |
| static inline bool |
| flexcan_active_rx_rtr(const struct flexcan_priv *priv) |
| { |
| const u32 quirks = priv->devtype_data.quirks; |
| |
| if (quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) { |
| if (quirks & FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR) |
| return true; |
| } else { |
| /* RX-FIFO is always RTR capable */ |
| return true; |
| } |
| |
| return false; |
| } |
| |
| |
| #endif /* _FLEXCAN_H */ |