blob: 45bf59ac8f5711867ed1ba433d3f5e7800b769e4 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* PPP synchronous tty channel driver for Linux.
*
* This is a ppp channel driver that can be used with tty device drivers
* that are frame oriented, such as synchronous HDLC devices.
*
* Complete PPP frames without encoding/decoding are exchanged between
* the channel driver and the device driver.
*
* The async map IOCTL codes are implemented to keep the user mode
* applications happy if they call them. Synchronous PPP does not use
* the async maps.
*
* Copyright 1999 Paul Mackerras.
*
* Also touched by the grubby hands of Paul Fulghum paulkf@microgate.com
*
* This driver provides the encapsulation and framing for sending
* and receiving PPP frames over sync serial lines. It relies on
* the generic PPP layer to give it frames to send and to process
* received frames. It implements the PPP line discipline.
*
* Part of the code in this driver was inspired by the old async-only
* PPP driver, written by Michael Callahan and Al Longyear, and
* subsequently hacked by Paul Mackerras.
*
* ==FILEVERSION 20040616==
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/tty.h>
#include <linux/netdevice.h>
#include <linux/poll.h>
#include <linux/ppp_defs.h>
#include <linux/ppp-ioctl.h>
#include <linux/ppp_channel.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/refcount.h>
#include <asm/unaligned.h>
#include <linux/uaccess.h>
#define PPP_VERSION "2.4.2"
/* Structure for storing local state. */
struct syncppp {
struct tty_struct *tty;
unsigned int flags;
unsigned int rbits;
int mru;
spinlock_t xmit_lock;
spinlock_t recv_lock;
unsigned long xmit_flags;
u32 xaccm[8];
u32 raccm;
unsigned int bytes_sent;
unsigned int bytes_rcvd;
struct sk_buff *tpkt;
unsigned long last_xmit;
struct sk_buff_head rqueue;
struct tasklet_struct tsk;
refcount_t refcnt;
struct completion dead_cmp;
struct ppp_channel chan; /* interface to generic ppp layer */
};
/* Bit numbers in xmit_flags */
#define XMIT_WAKEUP 0
#define XMIT_FULL 1
/* Bits in rbits */
#define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
#define PPPSYNC_MAX_RQLEN 32 /* arbitrary */
/*
* Prototypes.
*/
static struct sk_buff* ppp_sync_txmunge(struct syncppp *ap, struct sk_buff *);
static int ppp_sync_send(struct ppp_channel *chan, struct sk_buff *skb);
static int ppp_sync_ioctl(struct ppp_channel *chan, unsigned int cmd,
unsigned long arg);
static void ppp_sync_process(struct tasklet_struct *t);
static int ppp_sync_push(struct syncppp *ap);
static void ppp_sync_flush_output(struct syncppp *ap);
static void ppp_sync_input(struct syncppp *ap, const u8 *buf, const u8 *flags,
int count);
static const struct ppp_channel_ops sync_ops = {
.start_xmit = ppp_sync_send,
.ioctl = ppp_sync_ioctl,
};
/*
* Utility procedure to print a buffer in hex/ascii
*/
static void
ppp_print_buffer (const char *name, const __u8 *buf, int count)
{
if (name != NULL)
printk(KERN_DEBUG "ppp_synctty: %s, count = %d\n", name, count);
print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, count);
}
/*
* Routines implementing the synchronous PPP line discipline.
*/
/*
* We have a potential race on dereferencing tty->disc_data,
* because the tty layer provides no locking at all - thus one
* cpu could be running ppp_synctty_receive while another
* calls ppp_synctty_close, which zeroes tty->disc_data and
* frees the memory that ppp_synctty_receive is using. The best
* way to fix this is to use a rwlock in the tty struct, but for now
* we use a single global rwlock for all ttys in ppp line discipline.
*
* FIXME: Fixed in tty_io nowadays.
*/
static DEFINE_RWLOCK(disc_data_lock);
static struct syncppp *sp_get(struct tty_struct *tty)
{
struct syncppp *ap;
read_lock(&disc_data_lock);
ap = tty->disc_data;
if (ap != NULL)
refcount_inc(&ap->refcnt);
read_unlock(&disc_data_lock);
return ap;
}
static void sp_put(struct syncppp *ap)
{
if (refcount_dec_and_test(&ap->refcnt))
complete(&ap->dead_cmp);
}
/*
* Called when a tty is put into sync-PPP line discipline.
*/
static int
ppp_sync_open(struct tty_struct *tty)
{
struct syncppp *ap;
int err;
int speed;
if (tty->ops->write == NULL)
return -EOPNOTSUPP;
ap = kzalloc(sizeof(*ap), GFP_KERNEL);
err = -ENOMEM;
if (!ap)
goto out;
/* initialize the syncppp structure */
ap->tty = tty;
ap->mru = PPP_MRU;
spin_lock_init(&ap->xmit_lock);
spin_lock_init(&ap->recv_lock);
ap->xaccm[0] = ~0U;
ap->xaccm[3] = 0x60000000U;
ap->raccm = ~0U;
skb_queue_head_init(&ap->rqueue);
tasklet_setup(&ap->tsk, ppp_sync_process);
refcount_set(&ap->refcnt, 1);
init_completion(&ap->dead_cmp);
ap->chan.private = ap;
ap->chan.ops = &sync_ops;
ap->chan.mtu = PPP_MRU;
ap->chan.hdrlen = 2; /* for A/C bytes */
speed = tty_get_baud_rate(tty);
ap->chan.speed = speed;
err = ppp_register_channel(&ap->chan);
if (err)
goto out_free;
tty->disc_data = ap;
tty->receive_room = 65536;
return 0;
out_free:
kfree(ap);
out:
return err;
}
/*
* Called when the tty is put into another line discipline
* or it hangs up. We have to wait for any cpu currently
* executing in any of the other ppp_synctty_* routines to
* finish before we can call ppp_unregister_channel and free
* the syncppp struct. This routine must be called from
* process context, not interrupt or softirq context.
*/
static void
ppp_sync_close(struct tty_struct *tty)
{
struct syncppp *ap;
write_lock_irq(&disc_data_lock);
ap = tty->disc_data;
tty->disc_data = NULL;
write_unlock_irq(&disc_data_lock);
if (!ap)
return;
/*
* We have now ensured that nobody can start using ap from now
* on, but we have to wait for all existing users to finish.
* Note that ppp_unregister_channel ensures that no calls to
* our channel ops (i.e. ppp_sync_send/ioctl) are in progress
* by the time it returns.
*/
if (!refcount_dec_and_test(&ap->refcnt))
wait_for_completion(&ap->dead_cmp);
tasklet_kill(&ap->tsk);
ppp_unregister_channel(&ap->chan);
skb_queue_purge(&ap->rqueue);
kfree_skb(ap->tpkt);
kfree(ap);
}
/*
* Called on tty hangup in process context.
*
* Wait for I/O to driver to complete and unregister PPP channel.
* This is already done by the close routine, so just call that.
*/
static void ppp_sync_hangup(struct tty_struct *tty)
{
ppp_sync_close(tty);
}
/*
* Read does nothing - no data is ever available this way.
* Pppd reads and writes packets via /dev/ppp instead.
*/
static ssize_t
ppp_sync_read(struct tty_struct *tty, struct file *file, u8 *buf, size_t count,
void **cookie, unsigned long offset)
{
return -EAGAIN;
}
/*
* Write on the tty does nothing, the packets all come in
* from the ppp generic stuff.
*/
static ssize_t
ppp_sync_write(struct tty_struct *tty, struct file *file, const u8 *buf,
size_t count)
{
return -EAGAIN;
}
static int
ppp_synctty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
{
struct syncppp *ap = sp_get(tty);
int __user *p = (int __user *)arg;
int err, val;
if (!ap)
return -ENXIO;
err = -EFAULT;
switch (cmd) {
case PPPIOCGCHAN:
err = -EFAULT;
if (put_user(ppp_channel_index(&ap->chan), p))
break;
err = 0;
break;
case PPPIOCGUNIT:
err = -EFAULT;
if (put_user(ppp_unit_number(&ap->chan), p))
break;
err = 0;
break;
case TCFLSH:
/* flush our buffers and the serial port's buffer */
if (arg == TCIOFLUSH || arg == TCOFLUSH)
ppp_sync_flush_output(ap);
err = n_tty_ioctl_helper(tty, cmd, arg);
break;
case FIONREAD:
val = 0;
if (put_user(val, p))
break;
err = 0;
break;
default:
err = tty_mode_ioctl(tty, cmd, arg);
break;
}
sp_put(ap);
return err;
}
/* May sleep, don't call from interrupt level or with interrupts disabled */
static void
ppp_sync_receive(struct tty_struct *tty, const u8 *buf, const u8 *cflags,
size_t count)
{
struct syncppp *ap = sp_get(tty);
unsigned long flags;
if (!ap)
return;
spin_lock_irqsave(&ap->recv_lock, flags);
ppp_sync_input(ap, buf, cflags, count);
spin_unlock_irqrestore(&ap->recv_lock, flags);
if (!skb_queue_empty(&ap->rqueue))
tasklet_schedule(&ap->tsk);
sp_put(ap);
tty_unthrottle(tty);
}
static void
ppp_sync_wakeup(struct tty_struct *tty)
{
struct syncppp *ap = sp_get(tty);
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
if (!ap)
return;
set_bit(XMIT_WAKEUP, &ap->xmit_flags);
tasklet_schedule(&ap->tsk);
sp_put(ap);
}
static struct tty_ldisc_ops ppp_sync_ldisc = {
.owner = THIS_MODULE,
.num = N_SYNC_PPP,
.name = "pppsync",
.open = ppp_sync_open,
.close = ppp_sync_close,
.hangup = ppp_sync_hangup,
.read = ppp_sync_read,
.write = ppp_sync_write,
.ioctl = ppp_synctty_ioctl,
.receive_buf = ppp_sync_receive,
.write_wakeup = ppp_sync_wakeup,
};
static int __init
ppp_sync_init(void)
{
int err;
err = tty_register_ldisc(&ppp_sync_ldisc);
if (err != 0)
printk(KERN_ERR "PPP_sync: error %d registering line disc.\n",
err);
return err;
}
/*
* The following routines provide the PPP channel interface.
*/
static int
ppp_sync_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg)
{
struct syncppp *ap = chan->private;
int err, val;
u32 accm[8];
void __user *argp = (void __user *)arg;
u32 __user *p = argp;
err = -EFAULT;
switch (cmd) {
case PPPIOCGFLAGS:
val = ap->flags | ap->rbits;
if (put_user(val, (int __user *) argp))
break;
err = 0;
break;
case PPPIOCSFLAGS:
if (get_user(val, (int __user *) argp))
break;
ap->flags = val & ~SC_RCV_BITS;
spin_lock_irq(&ap->recv_lock);
ap->rbits = val & SC_RCV_BITS;
spin_unlock_irq(&ap->recv_lock);
err = 0;
break;
case PPPIOCGASYNCMAP:
if (put_user(ap->xaccm[0], p))
break;
err = 0;
break;
case PPPIOCSASYNCMAP:
if (get_user(ap->xaccm[0], p))
break;
err = 0;
break;
case PPPIOCGRASYNCMAP:
if (put_user(ap->raccm, p))
break;
err = 0;
break;
case PPPIOCSRASYNCMAP:
if (get_user(ap->raccm, p))
break;
err = 0;
break;
case PPPIOCGXASYNCMAP:
if (copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
break;
err = 0;
break;
case PPPIOCSXASYNCMAP:
if (copy_from_user(accm, argp, sizeof(accm)))
break;
accm[2] &= ~0x40000000U; /* can't escape 0x5e */
accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */
memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
err = 0;
break;
case PPPIOCGMRU:
if (put_user(ap->mru, (int __user *) argp))
break;
err = 0;
break;
case PPPIOCSMRU:
if (get_user(val, (int __user *) argp))
break;
if (val > U16_MAX) {
err = -EINVAL;
break;
}
if (val < PPP_MRU)
val = PPP_MRU;
ap->mru = val;
err = 0;
break;
default:
err = -ENOTTY;
}
return err;
}
/*
* This is called at softirq level to deliver received packets
* to the ppp_generic code, and to tell the ppp_generic code
* if we can accept more output now.
*/
static void ppp_sync_process(struct tasklet_struct *t)
{
struct syncppp *ap = from_tasklet(ap, t, tsk);
struct sk_buff *skb;
/* process received packets */
while ((skb = skb_dequeue(&ap->rqueue)) != NULL) {
if (skb->len == 0) {
/* zero length buffers indicate error */
ppp_input_error(&ap->chan, 0);
kfree_skb(skb);
}
else
ppp_input(&ap->chan, skb);
}
/* try to push more stuff out */
if (test_bit(XMIT_WAKEUP, &ap->xmit_flags) && ppp_sync_push(ap))
ppp_output_wakeup(&ap->chan);
}
/*
* Procedures for encapsulation and framing.
*/
static struct sk_buff*
ppp_sync_txmunge(struct syncppp *ap, struct sk_buff *skb)
{
int proto;
unsigned char *data;
int islcp;
data = skb->data;
proto = get_unaligned_be16(data);
/* LCP packets with codes between 1 (configure-request)
* and 7 (code-reject) must be sent as though no options
* have been negotiated.
*/
islcp = proto == PPP_LCP && 1 <= data[2] && data[2] <= 7;
/* compress protocol field if option enabled */
if (data[0] == 0 && (ap->flags & SC_COMP_PROT) && !islcp)
skb_pull(skb,1);
/* prepend address/control fields if necessary */
if ((ap->flags & SC_COMP_AC) == 0 || islcp) {
if (skb_headroom(skb) < 2) {
struct sk_buff *npkt = dev_alloc_skb(skb->len + 2);
if (npkt == NULL) {
kfree_skb(skb);
return NULL;
}
skb_reserve(npkt,2);
skb_copy_from_linear_data(skb,
skb_put(npkt, skb->len), skb->len);
consume_skb(skb);
skb = npkt;
}
skb_push(skb,2);
skb->data[0] = PPP_ALLSTATIONS;
skb->data[1] = PPP_UI;
}
ap->last_xmit = jiffies;
if (skb && ap->flags & SC_LOG_OUTPKT)
ppp_print_buffer ("send buffer", skb->data, skb->len);
return skb;
}
/*
* Transmit-side routines.
*/
/*
* Send a packet to the peer over an sync tty line.
* Returns 1 iff the packet was accepted.
* If the packet was not accepted, we will call ppp_output_wakeup
* at some later time.
*/
static int
ppp_sync_send(struct ppp_channel *chan, struct sk_buff *skb)
{
struct syncppp *ap = chan->private;
ppp_sync_push(ap);
if (test_and_set_bit(XMIT_FULL, &ap->xmit_flags))
return 0; /* already full */
skb = ppp_sync_txmunge(ap, skb);
if (skb != NULL)
ap->tpkt = skb;
else
clear_bit(XMIT_FULL, &ap->xmit_flags);
ppp_sync_push(ap);
return 1;
}
/*
* Push as much data as possible out to the tty.
*/
static int
ppp_sync_push(struct syncppp *ap)
{
int sent, done = 0;
struct tty_struct *tty = ap->tty;
int tty_stuffed = 0;
if (!spin_trylock_bh(&ap->xmit_lock))
return 0;
for (;;) {
if (test_and_clear_bit(XMIT_WAKEUP, &ap->xmit_flags))
tty_stuffed = 0;
if (!tty_stuffed && ap->tpkt) {
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
sent = tty->ops->write(tty, ap->tpkt->data, ap->tpkt->len);
if (sent < 0)
goto flush; /* error, e.g. loss of CD */
if (sent < ap->tpkt->len) {
tty_stuffed = 1;
} else {
consume_skb(ap->tpkt);
ap->tpkt = NULL;
clear_bit(XMIT_FULL, &ap->xmit_flags);
done = 1;
}
continue;
}
/* haven't made any progress */
spin_unlock_bh(&ap->xmit_lock);
if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags) ||
(!tty_stuffed && ap->tpkt)))
break;
if (!spin_trylock_bh(&ap->xmit_lock))
break;
}
return done;
flush:
if (ap->tpkt) {
kfree_skb(ap->tpkt);
ap->tpkt = NULL;
clear_bit(XMIT_FULL, &ap->xmit_flags);
done = 1;
}
spin_unlock_bh(&ap->xmit_lock);
return done;
}
/*
* Flush output from our internal buffers.
* Called for the TCFLSH ioctl.
*/
static void
ppp_sync_flush_output(struct syncppp *ap)
{
int done = 0;
spin_lock_bh(&ap->xmit_lock);
if (ap->tpkt != NULL) {
kfree_skb(ap->tpkt);
ap->tpkt = NULL;
clear_bit(XMIT_FULL, &ap->xmit_flags);
done = 1;
}
spin_unlock_bh(&ap->xmit_lock);
if (done)
ppp_output_wakeup(&ap->chan);
}
/*
* Receive-side routines.
*/
/* called when the tty driver has data for us.
*
* Data is frame oriented: each call to ppp_sync_input is considered
* a whole frame. If the 1st flag byte is non-zero then the whole
* frame is considered to be in error and is tossed.
*/
static void
ppp_sync_input(struct syncppp *ap, const u8 *buf, const u8 *flags, int count)
{
struct sk_buff *skb;
unsigned char *p;
if (count == 0)
return;
if (ap->flags & SC_LOG_INPKT)
ppp_print_buffer ("receive buffer", buf, count);
/* stuff the chars in the skb */
skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
if (!skb) {
printk(KERN_ERR "PPPsync: no memory (input pkt)\n");
goto err;
}
/* Try to get the payload 4-byte aligned */
if (buf[0] != PPP_ALLSTATIONS)
skb_reserve(skb, 2 + (buf[0] & 1));
if (flags && *flags) {
/* error flag set, ignore frame */
goto err;
} else if (count > skb_tailroom(skb)) {
/* packet overflowed MRU */
goto err;
}
skb_put_data(skb, buf, count);
/* strip address/control field if present */
p = skb->data;
if (skb->len >= 2 && p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) {
/* chop off address/control */
if (skb->len < 3)
goto err;
p = skb_pull(skb, 2);
}
/* PPP packet length should be >= 2 bytes when protocol field is not
* compressed.
*/
if (!(p[0] & 0x01) && skb->len < 2)
goto err;
/* queue the frame to be processed */
skb_queue_tail(&ap->rqueue, skb);
return;
err:
/* queue zero length packet as error indication */
if (skb || (skb = dev_alloc_skb(0))) {
skb_trim(skb, 0);
skb_queue_tail(&ap->rqueue, skb);
}
}
static void __exit
ppp_sync_cleanup(void)
{
tty_unregister_ldisc(&ppp_sync_ldisc);
}
module_init(ppp_sync_init);
module_exit(ppp_sync_cleanup);
MODULE_DESCRIPTION("PPP synchronous TTY channel module");
MODULE_LICENSE("GPL");
MODULE_ALIAS_LDISC(N_SYNC_PPP);