arch/arm/mach-s3c24xx/mach-anubis.c

// SPDX-License-Identifier: GPL-2.0
//
// Copyright 2003-2009 Simtec Electronics
//	http://armlinux.simtec.co.uk/
//	Ben Dooks <ben@simtec.co.uk>

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>

#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>

#include <net/ax88796.h>

#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include <plat/samsung-time.h>

#include "anubis.h"
#include "common.h"
#include "simtec.h"

#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"

static struct map_desc anubis_iodesc[] __initdata = {
  /* ISA IO areas */

  {
	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
	.pfn		= __phys_to_pfn(0x0),
	.length		= SZ_4M,
	.type		= MT_DEVICE,
  }, {
	.virtual	= (u32)S3C24XX_VA_ISA_WORD,
	.pfn		= __phys_to_pfn(0x0),
	.length 	= SZ_4M,
	.type		= MT_DEVICE,
  },

  /* we could possibly compress the next set down into a set of smaller tables
   * pagetables, but that would mean using an L2 section, and it still means
   * we cannot actually feed the same register to an LDR due to 16K spacing
   */

  /* CPLD control registers */

  {
	.virtual	= (u32)ANUBIS_VA_CTRL1,
	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
	.length		= SZ_4K,
	.type		= MT_DEVICE,
  }, {
	.virtual	= (u32)ANUBIS_VA_IDREG,
	.pfn		= __phys_to_pfn(ANUBIS_PA_IDREG),
	.length		= SZ_4K,
	.type		= MT_DEVICE,
  },
};

#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE

static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
	[0] = {
		.hwport	     = 0,
		.flags	     = 0,
		.ucon	     = UCON,
		.ulcon	     = ULCON,
		.ufcon	     = UFCON,
		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
	},
	[1] = {
		.hwport	     = 2,
		.flags	     = 0,
		.ucon	     = UCON,
		.ulcon	     = ULCON,
		.ufcon	     = UFCON,
		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
	},
};

/* NAND Flash on Anubis board */

static int external_map[]   = { 2 };
static int chip0_map[]      = { 0 };
static int chip1_map[]      = { 1 };

static struct mtd_partition __initdata anubis_default_nand_part[] = {
	[0] = {
		.name	= "Boot Agent",
		.size	= SZ_16K,
		.offset	= 0,
	},
	[1] = {
		.name	= "/boot",
		.size	= SZ_4M - SZ_16K,
		.offset	= SZ_16K,
	},
	[2] = {
		.name	= "user1",
		.offset	= SZ_4M,
		.size	= SZ_32M - SZ_4M,
	},
	[3] = {
		.name	= "user2",
		.offset	= SZ_32M,
		.size	= MTDPART_SIZ_FULL,
	}
};

static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
	[0] = {
		.name	= "Boot Agent",
		.size	= SZ_128K,
		.offset	= 0,
	},
	[1] = {
		.name	= "/boot",
		.size	= SZ_4M - SZ_128K,
		.offset	= SZ_128K,
	},
	[2] = {
		.name	= "user1",
		.offset	= SZ_4M,
		.size	= SZ_32M - SZ_4M,
	},
	[3] = {
		.name	= "user2",
		.offset	= SZ_32M,
		.size	= MTDPART_SIZ_FULL,
	}
};

/* the Anubis has 3 selectable slots for nand-flash, the two
 * on-board chip areas, as well as the external slot.
 *
 * Note, there is no current hot-plug support for the External
 * socket.
*/

static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
	[1] = {
		.name		= "External",
		.nr_chips	= 1,
		.nr_map		= external_map,
		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
		.partitions	= anubis_default_nand_part,
	},
	[0] = {
		.name		= "chip0",
		.nr_chips	= 1,
		.nr_map		= chip0_map,
		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
		.partitions	= anubis_default_nand_part,
	},
	[2] = {
		.name		= "chip1",
		.nr_chips	= 1,
		.nr_map		= chip1_map,
		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
		.partitions	= anubis_default_nand_part,
	},
};

static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
{
	unsigned int tmp;

	slot = set->nr_map[slot] & 3;

	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
		 slot, set, set->nr_map);

	tmp = __raw_readb(ANUBIS_VA_CTRL1);
	tmp &= ~ANUBIS_CTRL1_NANDSEL;
	tmp |= slot;

	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);

	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
}

static struct s3c2410_platform_nand __initdata anubis_nand_info = {
	.tacls		= 25,
	.twrph0		= 55,
	.twrph1		= 40,
	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
	.sets		= anubis_nand_sets,
	.select_chip	= anubis_nand_select,
	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
};

/* IDE channels */

static struct pata_platform_info anubis_ide_platdata = {
	.ioport_shift	= 5,
};

static struct resource anubis_ide0_resource[] = {
	[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
	[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
	[3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
};

static struct platform_device anubis_device_ide0 = {
	.name		= "pata_platform",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
	.resource	= anubis_ide0_resource,
	.dev	= {
		.platform_data = &anubis_ide_platdata,
		.coherent_dma_mask = ~0,
	},
};

static struct resource anubis_ide1_resource[] = {
	[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
	[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
	[2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
};

static struct platform_device anubis_device_ide1 = {
	.name		= "pata_platform",
	.id		= 1,
	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
	.resource	= anubis_ide1_resource,
	.dev	= {
		.platform_data = &anubis_ide_platdata,
		.coherent_dma_mask = ~0,
	},
};

/* Asix AX88796 10/100 ethernet controller */

static struct ax_plat_data anubis_asix_platdata = {
	.flags		= AXFLG_MAC_FROMDEV,
	.wordlength	= 2,
	.dcr_val	= 0x48,
	.rcr_val	= 0x40,
};

static struct resource anubis_asix_resource[] = {
	[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
	[1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
};

static struct platform_device anubis_device_asix = {
	.name		= "ax88796",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(anubis_asix_resource),
	.resource	= anubis_asix_resource,
	.dev		= {
		.platform_data = &anubis_asix_platdata,
	}
};

/* SM501 */

static struct resource anubis_sm501_resource[] = {
	[0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
	[1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
	[2] = DEFINE_RES_IRQ(IRQ_EINT0),
};

static struct sm501_initdata anubis_sm501_initdata = {
	.gpio_high	= {
		.set	= 0x3F000000,		/* 24bit panel */
		.mask	= 0x0,
	},
	.misc_timing	= {
		.set	= 0x010100,		/* SDRAM timing */
		.mask	= 0x1F1F00,
	},
	.misc_control	= {
		.set	= SM501_MISC_PNL_24BIT,
		.mask	= 0,
	},

	.devices	= SM501_USE_GPIO,

	/* set the SDRAM and bus clocks */
	.mclk		= 72 * MHZ,
	.m1xclk		= 144 * MHZ,
};

static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
	[0] = {
		.bus_num	= 1,
		.pin_scl	= 44,
		.pin_sda	= 45,
	},
	[1] = {
		.bus_num	= 2,
		.pin_scl	= 40,
		.pin_sda	= 41,
	},
};

static struct sm501_platdata anubis_sm501_platdata = {
	.init		= &anubis_sm501_initdata,
	.gpio_base	= -1,
	.gpio_i2c	= anubis_sm501_gpio_i2c,
	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
};

static struct platform_device anubis_device_sm501 = {
	.name		= "sm501",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(anubis_sm501_resource),
	.resource	= anubis_sm501_resource,
	.dev		= {
		.platform_data = &anubis_sm501_platdata,
	},
};

/* Standard Anubis devices */

static struct platform_device *anubis_devices[] __initdata = {
	&s3c2410_device_dclk,
	&s3c_device_ohci,
	&s3c_device_wdt,
	&s3c_device_adc,
	&s3c_device_i2c0,
 	&s3c_device_rtc,
	&s3c_device_nand,
	&anubis_device_ide0,
	&anubis_device_ide1,
	&anubis_device_asix,
	&anubis_device_sm501,
};

/* I2C devices. */

static struct i2c_board_info anubis_i2c_devs[] __initdata = {
	{
		I2C_BOARD_INFO("tps65011", 0x48),
		.irq	= IRQ_EINT20,
	}
};

/* Audio setup */
static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
	.have_mic	= 1,
	.have_lout	= 1,
	.output_cdclk	= 1,
	.use_mpllin	= 1,
	.amp_gpio	= S3C2410_GPB(2),
	.amp_gain[0]	= S3C2410_GPD(10),
	.amp_gain[1]	= S3C2410_GPD(11),
};

static void __init anubis_map_io(void)
{
	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);

	/* check for the newer revision boards with large page nand */

	if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
		printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
		       __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
		anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
	} else {
		/* ensure that the GPIO is setup */
		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
		gpio_free(S3C2410_GPA(0));
	}
}

static void __init anubis_init_time(void)
{
	s3c2440_init_clocks(12000000);
	samsung_timer_init();
}

static void __init anubis_init(void)
{
	s3c_i2c0_set_platdata(NULL);
	s3c_nand_set_platdata(&anubis_nand_info);
	simtec_audio_add(NULL, false, &anubis_audio);

	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));

	i2c_register_board_info(0, anubis_i2c_devs,
				ARRAY_SIZE(anubis_i2c_devs));
}


MACHINE_START(ANUBIS, "Simtec-Anubis")
	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
	.atag_offset	= 0x100,
	.map_io		= anubis_map_io,
	.init_machine	= anubis_init,
	.init_irq	= s3c2440_init_irq,
	.init_time	= anubis_init_time,
MACHINE_END